Myeloid differentiation factor 88 is required for resistance to Neospora caninum infection

Neospora caninum is an intracellular parasite that causes major economic impact on cattle raising farms, and infects a wide range of warm-blooded hosts worldwide. Innate immune mechanisms that lead to protection against this parasite are still unknown. In order to investigate whether myeloid differentiation factor 88 (MyD88) is required for resistance against N. caninum, genetically deficient mice (MyD88(-/-)) and wild type littermates were infected with live tachyzoites and the resistance to infection was evaluated. We found that sub-lethal tachyzoite doses induced acute mortality of MyD88(-/-) mice, which succumbed to infection due to uncontrolled parasite replication. Higher parasitism in MyD88(-/-) mice was associated with the lack of IL-12 production by dendritic cells, delayed IFN-gamma responses by NKT, CD4(+) and CD8(+) T lymphocytes, and production of high levels of IL-10. MyD88(-/-) mice replenished with IL-12 and IFN-gamma abolished susceptibility as the animals survived throughout the experimental period. We conclude that protective IFN-gamma-mediated immunity to N. caninum is dependent on initial MyD88 signaling, in a mechanism triggered by production of IL-12 by dendritic cells. Further knowledge on Toll-like receptor recognition of N. caninum antigens is encouraged, since it could generate new prophylactic and therapeutic tools to control parasite burden.

Prerequisite Programs at Schools: Diagnosis and Economic Evaluation

In this study, 20 Brazilian public schools have been assessed regarding good manufacturing practices and standard sanitation operating procedures implementation. We used a checklist comprised of 10 parts ( facilities and installations, water supply, equipments and tools, pest control, waste management, personal hygiene, sanitation, storage, documentation, and training), making a total of 69 questions. The implementing modification cost to the found nonconformities was also determined so that it could work with technical data as a based decision-making prioritization. The average nonconformity percentage at schools concerning to prerequisite program was 36%, from which 66% of them own inadequate installations, 65% waste management, 44% regarding documentation, and 35% water supply and sanitation. The initial estimated cost for changing has been U.S.$24,438 and monthly investments of 1.55% on the currently needed invested values. This would result in U.S.$0.015 increase on each served meal cost over the investment replacement within a year. Thus, we have concluded that such modifications are economically feasible and will be considered on technical requirements when prerequisite program implementation priorities are established.

Optimal location of the workpiece in a PKM-based machining robotic cell

Most machining tasks require high accuracy and are carried out by dedicated machine-tools. On the other hand, traditional robots are flexible and easy to program, but they are rather inaccurate for certain tasks. Parallel kinematic robots could combine the accuracy and flexibility that are usually needed in machining operations. Achieving this goal requires proper design of the parallel robot. In this chapter, a multi-objective particle swarm optimization algorithm is used to optimize the structure of a parallel robot according to specific criteria. Afterwards, for a chosen optimal structure, the best location of the workpiece with respect to the robot, in a machining robotic cell, is analyzed based on the power consumed by the manipulator during the machining process.

Promoting Portuguese exports to Germany: An export promotion plan for the machinery & equipment sector

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Steuerung von sechsbeinigen Laufrobotern unter dem Aspekt technischer Anwendungen

Walking robot, legged robot, walking machine, walking vehicle, control system, force control, technical application, kinematics distributed control, embedded system

Respuesta no lineal y criterios de diseño de puentes arco espaciales

El desarrollo más reciente de los puentes arco ha llevado a una nueva tipología: los “puentes arco espaciales”. Se entiende por puente arco espacial todo puente arco en el que, por su configuración geométrica y estructural, las cargas gravitatorias generan esfuerzos no contenidos en el plano del arco. Por un lado, aparecen para satisfacer las necesidades funcionales cuando estructuras en arco resultan las más adecuadas para sostener tableros curvos y evitar así apoyos intermedios. Desde un punto de vista estético, surgen como demanda de los nuevos puentes en entornos urbanos, buscando, no sólo una forma cuidada, sino persiguiendo convertirse en emblemas de la ciudad a partir de la originalidad y la innovación. Su proyecto y construcción es posible gracias a las grandes posibilidades que ofrecen los nuevos métodos de cálculo y dibujo por ordenador, en los que, a través del incremento de memoria y rapidez, cada vez se emplean programas más completos y nuevas modelizaciones, más cercanas a la realidad. No menos importante es el desarrollo de los medios auxiliares de construcción y de las herramientas de CAD/CAM, que convierte en construibles por control numérico formas de manufactura impensables. Ello trasciende en infinitas posibilidades de diseño y estructura. Sin embargo, el diseño y construcción de estas nuevas tipologías no ha estado acompañado por el avance en el estado del conocimiento fundamentado en la investigación, ya que se han desarrollado pocos estudios que explican parcialmente la respuesta estructural de estos puentes. Existe, por lo tanto, la necesidad de profundizar en el estado del conocimiento y clarificar su respuesta estructural, así como de plantear, finalmente, criterios de diseño que sirvan de apoyo en las fases de concepción y de proyecto a estas nuevas tipologías.

Chagas disease: current epidemiological trends after the interruption of vectorial and transfusional transmission in the Southern Cone countries

Chagas disease, named after Carlos Chagas who first described it in 1909, exists only on the American Continent. It is caused by a parasite, Trypanosoma cruzi, transmitted to humans by blood-sucking triatomine bugs and by blood transfusion. Chagas disease has two successive phases, acute and chronic. The acute phase lasts 6 to 8 weeks. After several years of starting the chronic phase, 20% to 35% of the infected individuals, depending on the geographical area will develop irreversible lesions of the autonomous nervous system in the heart, esophagus, colon and the peripheral nervous system. Data on the prevalence and distribution of Chagas disease improved in quality during the 1980's as a result of the demographically representative cross-sectional studies carried out in countries where accurate information was not available. A group of experts met in Brasília in 1979 and devised standard protocols to carry out countrywide prevalence studies on human T. cruzi infection and triatomine house infestation. Thanks to a coordinated multi-country program in the Southern Cone countries the transmission of Chagas disease by vectors and by blood transfusion has been interrupted in Uruguay in1997, in Chile in 1999, and in 8 of the 12 endemic states of Brazil in 2000 and so the incidence of new infections by T. cruzi in the whole continent has decreased by 70%. Similar control multi-country initiatives have been launched in the Andean countries and in Central America and rapid progress has been recorded to ensure the interruption of the transmission of Chagas disease by 2005 as requested by a Resolution of the World Health Assembly approved in 1998. The cost-benefit analysis of the investments of the vector control program in Brazil indicate that there are savings of US$17 in medical care and disabilities for each dollar spent on prevention, showing that the program is a health investment with good return. Since the inception in 1979 of the Steering Committee on Chagas Disease of the Special Program for Research and Training in Tropical Diseases of the World Health Organization (TDR), the objective was set to promote and finance research aimed at the development of new methods and tools to control this disease. The well known research institutions in Latin America were the key elements of a world wide network of laboratories that received - on a competitive basis - financial support for projects in line with the priorities established. It is presented the time line of the different milestones that were answering successively and logically the outstanding scientific questions identified by the Scientific Working Group in 1978 and that influenced the development and industrial production of practical solutions for diagnosis of the infection and disease control.

Molecular approaches for the detection of Schistosoma mansoni: possible applications in the detection of snail infection, monitoring of transmission sites, and diagnosis of human infection

The detection of specific DNA sequences by polymerase chain reaction (PCR) has proved extremely valuable for the analysis of genetic disorders and the diagnosis of a variety of infectious disease pathogens. However, the application to the detection of Schistosoma mansoni is rare, despite a recommendation of the World Health Organization that a major focus of research on schistosomiasis should be on the development and evaluation of new strategies and tools for control of the disease. In this context, a few studies were published for the detection of the parasite in snails, monitoring of cercariae in water bodies, and diagnosis of human infection. The present minireview describes sensitive and specific PCR based systems to detect S. mansoni, indicating possible applications in the detection of snail infection, monitoring of transmission sites, and diagnosis of human infection.

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

The Design of a Software Lifecycle Management Framework to a Configuration Management System

Keeping track of software assets and managing software installations in IT environments can be a hard endeavor, especially when the size and diversity of the environment grows. How to install and uninstall software efficiently and cost effectively? Are there too few or too many software licenses purchased? If installed, is the software actually in use? Software Asset Management (SAM) is a process that involves managing and optimizing the purchase, deployment, maintenance, utilization, and disposal of software applications within an organization. This master’s thesis describes a special Software Lifecycle Management Framework to provide solutions to the multitude of challenges within SAM. The main objectives when designing the framework was to provide a set of tools to control the software assets during their entire lifecycle while trying to minimize the costs related to owning and managing them.

Error Modeling and Accuracy Analysis of a Novel Mobile Hybrid Parallel Robot

Over the last decades, calibration techniques have been widely used to improve the accuracy of robots and machine tools since they only involve software modification instead of changing the design and manufacture of the hardware. Traditionally, there are four steps are required for a calibration, i.e. error modeling, measurement, parameter identification and compensation. The objective of this thesis is to propose a method for the kinematics analysis and error modeling of a newly developed hybrid redundant robot IWR (Intersector Welding Robot), which possesses ten degrees of freedom (DOF) where 6-DOF in parallel and additional 4-DOF in serial. In this article, the problem of kinematics modeling and error modeling of the proposed IWR robot are discussed. Based on the vector arithmetic method, the kinematics model and the sensitivity model of the end-effector subject to the structure parameters is derived and analyzed. The relations between the pose (position and orientation) accuracy and manufacturing tolerances, actuation errors, and connection errors are formulated. Computer simulation is performed to examine the validity and effectiveness of the proposed method.

Estudi de la influència del lubricant en operacions de mecanització

Els processos de mecanitzat amb arrencament de ferritja consisteixen en arrencar contínuament petits fragments de material de la peça a la que es vol donar forma mitjançant les eines de tall. En treballar amb metalls, aquestes forces de tall són importants, i provoquen el desgast de les eines així com un escalfament important de l’eina i la peça. Per aquest motiu s’introdueixen els olis de tall, amb les principals funcions de refrigerar i lubricar. Tradicionalment, aquests olis de tall s’han subministrat a raig, quedant la zona de treball inundada. Els últims anys, degut a les millores tecnològiques i per intentar estalviar amb olis de tall, s’ha ideat un nou sistema anomenat mínima quantitat de lubricant, el qual subministra petites gotes d’oli, no soluble en aigua, dins un flux d’aire a pressió. Aquest sistema, a més, s’injecta prop de la zona de treball, on és estricament necessari. Aquest sistema redueix considerablement el consum d’oli de tall, i a més, augmenta l’eficiència de lalubricació. A part, elimina els posteriors tractaments per reciclar l’oli de tall un cop perd les seves propietats. Per aquest motiu, es pretén estudiar la utilització d’un mètode semblant al de la mínima quantitat de lubricant, subministrant el mateix oli de tall que s’utilitza convencionalment però polvoritzar per tal de convertir-lo en un aerosol

Diagnostiikkayksikön kehittäminen rautatiesovellukseen

Suomessa rautatiellä käytetään muutamia tuhansia sähköisesti ohjattavia vaihteita, joiden toiminta varmistetaan määräajoin tehtävillä huolloilla. Työssä on tutkittu, onko kehitteillä olevalla vaihteenohjaimella mahdollista mitata ja analysoida vaihteen kunnonvalvontaan liittyviä suureita. Tutkimuksessa on tutustuttu rautatietekniikkaan sekä vaihdetta ohjaavaan vaihteenkääntölaitteeseen. Tutkimuksen perusteella on kehitetty sulautettuun järjestelmään perustuva mittaus- ja analysointijärjestelmäsovellus, joka tekee mittauksia, havaintoja ja johtopäätöksiä vaihteen toiminnasta. Mittaukset on suoritettu moottoria ohjaavista johtimista ja mittaustulokset on tallennettu analysointia ja jatkokäsittelyä varten. Ohjelmiston toimintaa on varmistettu mittauksilla sekä laboratorio-olosuhteissa että oikealla vaihteella testausympäristössä. Saatujen tulosten perusteella voidaan todeta, että kehitetyllä laitteistolla on mahdollista toteuttaa vaihdetta diagnosoivia mittauksia riittävän laadukkaasti ja tarkasti. Työssä kehitetty järjestelmäalusta soveltuu käytettäväksi vaihteen diagnostiikan jatkokehittämiselle.

Vuokamallisten kartonkipakkausten laadunvarmistuslaitteiston kehittäminen

Diplomityön tavoitteena oli kehittää vuokamallisille kartonkipakkauksille laadunvarmistuslaitteisto. Kirjallisen osan alussa esiteltiin vuokamallisten kartonkipakkausten valmistusprosessia. Tästä siirryttiin laatuasioihin, jossa tärkeimmät asiat olivat kartonkivuokien valmistuksessa esiintyvät laatupoikkeamat ja konenäkö. Tutkimusosan alussa esitellään Lappeenrannan teknillisessä yliopistossa kehitetty kartonkivuokien valmistuslinjasto. Tämän jälkeen vaatimuslistan pohjalta suunnitellaan kyseiseen linjastoon sopiva automaattinen laadunvalvontalaite, johon sisältyy myös kartonkivuokien siirtolaite. Suunnitteluprosessi aloitettiin koekuvaamalla kartonkivuokia erilaisilla kameroilla ja valaistusmenetelmillä. Koekuvausten perusteella valittiin konenäkölaitteisto. Tämän jälkeen toiminnoista luotiin periaatepiirroksia, joista kehitettiin varsinainen suunnitelma. Työn tuloksena saatiin suunnitelma konenäköön perustuvan automaattisen laadunvalvontalaitteen rakentamiselle.

Automation concept for an electrically excited synchronous motor: Setup and requirements specification

This bachelor’s thesis is a part of the research project realized in the summer 2011 in Lappeenranta University of Technology. The goal of the project was to create an automation concept for controlling an electrically excited synchronous motor. This thesis concentrates on the setup and requirements specification part of the concept. The setup consists of ABB AC500 as the PLC master device, DCS800 as an exciter and ACS800 as a frequency converter. The ACS800 frequency converter uses permanent magnet synchronous machine software to control the stator’s magnetic field, the DC drive handles the excitation and the AC500 PLC master controls the communication and functionality of the system. The requirements specification briefly explains the general over-view of the concept, the use and functionality of the PLC program and the requirements needed for the whole concept and the PLC program to work as intended.