Koneellisen annosjakelupalvelun aloittaminen - lääkehoidon tarkistus ja sen vaikutus potilaan lääkehoitoon

Farmaseuttisilla palveluilla tarkoitetaan apteekkien palveluita, joissa hyödynnetään apteekin farmaseuttisen henkilökunnan tietoja ja taitoja. Farmaseuttiset palvelut voidaan jakaa farmaseuttisiin perus- ja erityispalveluihin. Farmaseuttiset peruspalvelut kattavat apteekkien lakisääteiset tehtävät, kun taas farmaseuttisilla erityispalveluilla pyritään ottamaan aktiivisempi rooli asiakkaan terveyden edistämisessä. Koneellinen annosjakelupalvelu on farmaseuttinen erityispalvelu. Koneellisessa annosjakelupalvelussa lääkkeet jaetaan kerta-annospusseihin annostusajankohdan mukaan. Kun uusi asiakas aloittaa koneellinen annosjakelupalvelun, tarkistetaan asiakkaan lääkitys yhteensopimattomien ja turhien lääkkeiden osalta. Palvelun aloitushetkellä huomioidaan myös lääkevalmisteiden sopivuus koneelliseen annosjakeluun sekä tarkistetaan valmisteiden annosteluajankohdat. Koneellisessa annosjakelupalvelussa asiakkaan lääkehoidosta muodostetaan lääkityskortti, josta kokonaislääkehoito on helppo tarkistaa. Erikoistyön tavoitteena oli selvittää millainen lääkehoidon arviointi tai tarkistus koneellisen annosjakelupalvelun aloittamisen yhteydessä tehdään ja miten palvelun aloittavien asiakkaiden kokonaislääkehoitotieto saadaan selvitettyä. Lisäksi selvitettiin millaisia muutoksia lääkehoitoihin tehdään palvelun aloittamisen yhteydessä, mitkä ovat muutosten syyt sekä millainen on asiakkaan kokonaislääkehoito. Kyselylomake lähetettiin kaikkiin apteekkeihin, jotka tilasivat koneellista annosjakelua sopimusvalmistuksena Espoonlahden apteekilta syyskuussa 2010. Tutkimus suoritettiin semistrukturoidulla kirjallisella kyselyllä, joka sisälsi sekä avoimia kysymyksiä että monivalintakysymyksiä. Kyselyyn saatiin 147 vastausta ja vastausprosentiksi muodostui 45. Vastauksia kyselyyn saatiin koko Mannersuomen alueelta ja kaikkien kokoluokkien apteekeilta. Koneellisen annosjakelupalvelun aloittavat henkilöt ovat pääasiassa iäkkäitä, jotka ovat kotihoidon piirissä, asuvat hoitokodissa tai palveluasumisen yksikössä. Asiakkaiden lääkitystietojen keräämisessä hyödynnetään lääkityskorttia, mutta lääkityskortin tietoja päivitetään myös muista lähteistä. Asiakkaiden lääkityksille tehdään useimmiten lääkehoidon tarkistus moniammatillisena yhteistyönä. Lääkehoidolle tehdyt muutokset johtuvat pääasiassa lääkevaihdosta, annosjakelukoneen lääkevalikoimasta tai puolittamisen välttämisestä. Lääkehoidoissa on vain vähän yhteisvaikutuksia, jotka johtavat lääkevalmisteen käytön lopettamiseen. Lääkehoidon tarkistuksella ei ollut suurta vaikutusta asiakkaiden käyttämien lääkevalmisteiden määrään. Palvelun aloittamisen jälkeen asiakkaalla on käytössään keskimäärin 11 lääkevalmistetta, joista seitsemää jaellaan koneellisesti. Lääkeaineryhmistä eniten käytettyjä ovat hermostoon vaikuttavat sekä sydän- ja verisuonisairauksien lääkkeet, joita kumpaakin on käytössä keskimäärin kolme jokaisella uudella koneellisen annosjakelupalvelun asiakkaalla sekä palvelun aloittamista ennen että sen jälkeen.

Elämästä autofiktioksi : Lajitradition jäljillä Pirkko Saision romaanisarjassa Pienin yhteinen jaettava, Vastavalo ja Punainen erokirja

Pirkko Saisio's trilogy Pienin yhteinen jaettava (The Smallest Shared Dividend, 1998), Vastavalo (Against the Light, 2000), and Punainen erokirja (The Red Book of Separation, 2003), depicts the development of a masculine girl who at the end of the trilogy comes out as a homosexual women, a mother, and a writer. The main character is named Pirkko Saisio, and many of the events are picked from Saisio's real life. Nevertheless, the author wants the trilogy to be read as a novel, not a memoir. The present study analyses the generic elements of Saisio s trilogy and contextualizes the narrative identity that Saisio is creating in her fiction. Following Alastair Fowler s theory of genres as types without strict borders and a tendency to hybridity, the trilogy is linked to several genres. Serge Doubrovsky s genre concept of autofiction is the basis for the analysis: it explains the trilogy s borderline identity between autobiography and novel, and designates the main elements that render Saisio s autobiographical narrative into fiction. Both Doubrovsky and Saisio emphasize the role of the unconscious in writing, and at the same time stress the importance of a skilled composition. As well as autofiction, the trilogy is analyzed as a Bildungsroman, a confession and conversion narrative, a coming-out -narrative and a portrait-of-the-artist novel. Each genre is illuminated by its paradigmatic work: Wilhelm Meister s Apprenticeship by Goethe, The Confessions by St. Augustine, and The Well of Loneliness by Radclyffe Hall. The parallelisms between Saisio s trilogy and the typical plots of the genres and thematics of the classics show how the tradition works in Saisio s text. The thematic parallelisms highlight Saisio s concern for the conflicts that occur between an individual and the surrounding society, while the similarities in plots question the autobiographicality of Saisio s narrative but also clarify how Saisio refines the traditional genres. Read in the light of Saisio s trilogy, the classics are shown to have their gender-transgressive elements that the non-normative reader can identify with. Saisio s text also challenges universalizing claims about genre and gender. As a narrative of identity it follows the example of 1970s essentialistic coming-out stories, but at the same time depicts the notion of identity in a manner that manifests postmodern ideas about identity as multiple and ever-transforming. Keywords: autobiographicality, autofiction, identity narrative, genre research, Bildungsroman, conversion narrative, confession, coming-out story, a portrait-of-an-artist novel

Accurate mass-based analysis in human sport doping control : Application of liquid chromatography - time-of-flight mass spectrometry

Human sport doping control analysis is a complex and challenging task for anti-doping laboratories. The List of Prohibited Substances and Methods, updated annually by World Anti-Doping Agency (WADA), consists of hundreds of chemically and pharmacologically different low and high molecular weight compounds. This poses a considerable challenge for laboratories to analyze for them all in a limited amount of time from a limited sample aliquot. The continuous expansion of the Prohibited List obliges laboratories to keep their analytical methods updated and to research new available methodologies. In this thesis, an accurate mass-based analysis employing liquid chromatography - time-of-flight mass spectrometry (LC-TOFMS) was developed and validated to improve the power of doping control analysis. New analytical methods were developed utilizing the high mass accuracy and high information content obtained by TOFMS to generate comprehensive and generic screening procedures. The suitability of LC-TOFMS for comprehensive screening was demonstrated for the first time in the field with mass accuracies better than 1 mDa. Further attention was given to generic sample preparation, an essential part of screening analysis, to rationalize the whole work flow and minimize the need for several separate sample preparation methods. Utilizing both positive and negative ionization allowed the detection of almost 200 prohibited substances. Automatic data processing produced a Microsoft Excel based report highlighting the entries fulfilling the criteria of the reverse data base search (retention time (RT), mass accuracy, isotope match). The quantitative performance of LC-TOFMS was demonstrated with morphine, codeine and their intact glucuronide conjugates. After a straightforward sample preparation the compounds were analyzed directly without the need for hydrolysis, solvent transfer, evaporation or reconstitution. The hydrophilic interaction technique (HILIC) provided good chromatographic separation, which was critical for the morphine glucuronide isomers. A wide linear range (50-5000 ng/ml) with good precision (RSD<10%) and accuracy (±10%) was obtained, showing comparable or better performance to other methods used. In-source collision-induced dissociation (ISCID) allowed confirmation analysis with three diagnostic ions with a median mass accuracy of 1.08 mDa and repeatable ion ratios fulfilling WADA s identification criteria. The suitability of LC-TOFMS for screening of high molecular weight doping agents was demonstrated with plasma volume expanders (PVE), namely dextran and hydroxyethylstarch (HES). Specificity of the assay was improved, since interfering matrix compounds were removed by size exclusion chromatography (SEC). ISCID produced three characteristic ions with an excellent mean mass accuracy of 0.82 mDa at physiological concentration levels. In summary, by combining TOFMS with a proper sample preparation and chromatographic separation, the technique can be utilized extensively in doping control laboratories for comprehensive screening of chemically different low and high molecular weight compounds, for quantification of threshold substances and even for confirmation. LC-TOFMS rationalized the work flow in doping control laboratories by simplifying the screening scheme, expediting reporting and minimizing the analysis costs. Therefore LC-TOFMS can be exploited widely in doping control, and the need for several separate analysis techniques is reduced.

A methodology for supporting ``transfer'' in biomimetic design

Biomimetics involves transfer from one or more biological examples to a technical system. This study addresses four questions. What are the essential steps in a biomimetic process? What is transferred? How can the transferred knowledge be structured in a way useful for biologists and engineers? Which guidelines can be given to support transfer in biomimetic design processes? In order to identify the essential steps involved in carrying out biomimetics, several procedures found in the literature were summarized, and four essential steps that are common across these procedures were identified. For identification of mechanisms for transfer, 20 biomimetic examples were collected and modeled according to a model. of causality called the SAPPhIRE model. These examples were then analyzed for identifying the underlying similarity between each biological and corresponding analogue technical system. Based on the SAPPhIRE model, four levels of abstraction at which transfer takes place were identified. Taking into account similarity, the biomimetic examples were assigned to the appropriate levels of abstraction of transfer. Based on the essential steps and the levels of transfer, guidelines for supporting transfer in biomimetic design were proposed and evaluated using design experiments. The 20 biological and analogue technical systems that were analyzed were similar in the physical effects used and at the most abstract levels of description of their functionality, but they were the least similar at the lowest levels of abstraction: the parts involved. Transfer most often was carried out at the physical effect level of abstraction. Compared to a generic set of guidelines based on the literature, the proposed guidelines improved design performance by about 60%. Further, the SAPPhIRE model turned out to be a useful representation for modeling complex biological systems and their functionality. Databases of biological systems, which are structured using the SAPPhIRE model, have the potential to aid biomimetic concept generation.

Domestic labour relations in India : Vulnerability and gendered life courses in Jaipur

This study explores labour relations between domestic workers and employers in India. It is based on interviews with both employers and workers, and ethnographically oriented field work in Jaipur, carried out in 2004-2007. Combining development studies with gender studies, labour studies, and childhood studies, it asks how labour relations between domestic workers and employers are formed in Jaipur, and how female domestic workers trajectories are created. Focusing on female part-time maids and live-in work arrangements, the study analyses children s work in the context of overall work force, not in isolation from it. Drawing on feminist Marxism, domestic labour relations are seen as an arena of struggle. The study takes an empirical approach, showing class through empiria and shows how paid domestic work is structured and stratified through intersecting hierarchies of class, caste, gender, age, ethnicity and religion. The importance of class in domestic labour relations is reiterated, but that of caste, so often downplayed by employers, is also emphasized. Domestic workers are crucial to the functioning of middle and upper middle class households, but their function is not just utilitarian. Through them working women and housewives are able to maintain purity and reproduce class disctinctions, both between poor and middle classes and lower and upper middle classes. Despite commodification of work relations, traditional elements of service relationships have been retained, particularly through maternalist practices such as gift giving, creating a peculiar blend of traditional and market practices. Whilst employers of part-time workers purchase services in a segmented market from a range of workers for specific, traditional live-in workers are also hired to serve employers round the clock. Employers and workers grudgingly acknowledged their dependence on one another, employers seeking various strategies to manage fear of servant crime, such as the hiring of children or not employing live-in workers in dual-earning households. Paid domestic work carries a heavy stigma and provide no entry to other jobs. It is transmitted from mothers to daughters and working girls were often the main income providers in their families. The diversity of working conditions is analysed through a continuum of vulnerability, generic live-in workers, particularly children and unmarried young women with no close family in Jaipur, being the most vulnerable and experienced part-time workers the least vulnerable. Whilst terms of employment are negotiated informally and individually, some informal standards regarding salary and days off existed for maids. However, employers maintain that workings conditions are a matter of individual, moral choice. Their reluctance to view their role as that of employers and the workers as their employees is one of the main stumbling blocks in the way of improved working conditions. Key words: paid domestic work, India, children s work, class, caste, gender, life course

Texts "Con and Pro" : The Early Modern Medical Controversy over Tobacco

The habit of "drinking smoke" , meaning tobacco smoking, caused a true controversy in early modern England. The new substance was used both for its alleged therapeutic properties as well as its narcotic effects. The dispute over tobacco continues the line of written controversies which were an important means of communication in the sixteenth and seventeenth century Europe. The tobacco controversy is special among medical controversies because the recreational use of tobacco soon spread and outweighed its medicinal use, ultimately causing a social and cultural crisis in England. This study examines how language is used in polemic discourse and argumentation. The material consists of medical texts arguing for and against tobacco in early modern England. The texts were compiled into an electronic corpus of tobacco texts (1577 1670) representing different genres and styles of writing. With the help of the corpus, the tobacco controversy is described and analyzed in the context of early modern medicine. A variety of methods suitable for the study of conflict discourse were used to assess internal and external text variation. The linguistic features examined include personal pronouns, intertextuality, structural components, and statistically derived keywords. A common thread in the work is persuasive language use manifested, for example, in the form of emotive adjectives and the generic use of pronouns; the latter is especially pronounced in the dichotomy between us and them. Controversies have not been studied in this manner before but the methods applied have supplemented each other and proven their suitability in the study of conflictive discourse. These methods can also be applied to present-day materials.

A linear sequence of extant families and genera of lycophytes and ferns

Throughout the history of the classification of extant ferns (monilophytes) and lycophytes, familial and generic concepts have been in great flux. For the organisation of lycophytes and ferns in herbaria, books, checklists, indices and spore banks and on the internet, this poses a problem, and a standardized linear sequence of these plants is therefore in great need. We provide here a linear classification to the extant lycophytes and ferns based on current phylogenetic knowledge; this provides a standardized guide for organisation of fern collections into a more natural sequence. Two new families, Diplaziopsidaceae and Rhachidosoraceae, are here introduced.

High-quality annotation of promoter regions for 913 bacterial genomes

Motivation: The number of bacterial genomes being sequenced is increasing very rapidly and hence, it is crucial to have procedures for rapid and reliable annotation of their functional elements such as promoter regions, which control the expression of each gene or each transcription unit of the genome. The present work addresses this requirement and presents a generic method applicable across organisms. Results: Relative stability of the DNA double helical sequences has been used to discriminate promoter regions from non-promoter regions. Based on the difference in stability between neighboring regions, an algorithm has been implemented to predict promoter regions on a large scale over 913 microbial genome sequences. The average free energy values for the promoter regions as well as their downstream regions are found to differ, depending on their GC content. Threshold values to identify promoter regions have been derived using sequences flanking a subset of translation start sites from all microbial genomes and then used to predict promoters over the complete genome sequences. An average recall value of 72% (which indicates the percentage of protein and RNA coding genes with predicted promoter regions assigned to them) and precision of 56% is achieved over the 913 microbial genome dataset.

Adaptive optimal load balancing in a nonhomogeneous multiserver system with a central job scheduler

A model comprising several servers, each equipped with its own queue and with possibly different service speeds, is considered. Each server receives a dedicated arrival stream of jobs; there is also a stream of generic jobs that arrive to a job scheduler and can be individually allocated to any of the servers. It is shown that if the arrival streams are all Poisson and all jobs have the same exponentially distributed service requirements, the probabilistic splitting of the generic stream that minimizes the average job response time is such that it balances the server idle times in a weighted least-squares sense, where the weighting coefficients are related to the service speeds of the servers. The corresponding result holds for nonexponentially distributed service times if the service speeds are all equal. This result is used to develop adaptive quasi-static algorithms for allocating jobs in the generic arrival stream when the load parameters are unknown. The algorithms utilize server idle-time measurements which are sent periodically to the central job scheduler. A model is developed for these measurements, and the result mentioned is used to cast the problem into one of finding a projection of the root of an affine function, when only noisy values of the function can be observed

Cohésion modale et subordination : Le conditionnel et le jussif finnois au miroir de la valeur sémantique et discursive du subjonctif français

Modal cohesion and subordination. The Finnish conditional and jussive moods in comparison to the French subjunctive This study examines verb moods in subordinate clauses in French and Finnish. The first part of the analysis deals with the syntax and semantics of the French subjunctive, mood occurring mostly in subordinate positions. The second part investigates Finnish verb moods. Although subordinate positions in Finnish grammar have no special finite verb form, certain uses of Finnish verb moods have been compared to those of subjunctives and conjunctives in other languages. The present study focuses on the subordinate uses of the Finnish conditional and jussive (i.e. the third person singular and plural of the imperative mood). The third part of the analysis discusses the functions of subordinate moods in contexts beyond complex sentences. The data used for the analysis include 1834 complex sentences gathered from newspapers, online discussion groups and blog texts, as well as audio-recorded interviews and conversations. The data thus consist of both written and oral texts as well as standard and non-standard variants. The analysis shows that the French subjunctive codes theoretical modality. The subjunctive does not determine the temporal and modal meaning of the event, but displays the event as virtual. In a complex sentence, the main clause determines the temporal and modal space within which the event coded by the subjunctive clause is interpreted. The subjunctive explicitly indicates that the space constructed in the main clause extends its scope over the subordinate clause. The subjunctive can therefore serve as a means for creating modal cohesion in the discourse. The Finnish conditional shares the function of making explicit the modal link between the components of a complex construction with the French subjunctive, but the two moods differ in their semantics. The conditional codes future time and can therefore occur only in non-factual or counterfactual contexts, whereas the event expressed by French subjunctive clauses can also be interpreted as realized. Such is the case when, for instance, generic and habitual meaning is involved. The Finnish jussive mood is used in a relatively limited number of subordinate clause types, but in these contexts its modal meaning is strikingly close to that of the French subjunctive. The permissive meaning, typical of the jussive in main clause positions, is modified in complex sentences so that it entails inter-clausal relation, namely concession. Like the French subjunctive, the jussive codes theoretical modal meaning with no implication of the truth value of the proposition. Finally, the analysis shows that verb moods mark modal cohesion, not only on the syntagmatic level (namely in complexe sentences), but also on the paradigmatic axis of discourse in order to create semantic links over entire segments of talk. In this study, the subjunctive thus appears, not as an empty category without function, as it is sometimes described, but as an open form that conveys the temporal and modal meanings emerging from the context.

Taxonomy and phylogeny of the manna lichens and allied species (Megasporaceae)

This dissertation is focused on the taxonomy, phylogeny, and ecology of the vagrant, erratic and allied terricolous and saxicolous species of the genera Aspicilia A. Massal. and Circinaria Link (Megasporaceae), particularly those traditionally referred to as manna lichens . The group has previously been defined on the basis of few morphological characters. The phylogeny of the family Megasporaceae is inferred from the combined dataset of nuLSU and mtSSU sequences. Five genera Aspicilia, Circinaria, Lobothallia, Megaspora, and Sagedia are recognized. Lobothallia is sister of the four other genera, while Aspicilia and Sagedia form the next clade. All these genera have small asci with eight spores. Circinaria is a sister genus of Megaspora, and these two have in common asci with (1 4) 6 8 large spores. Circinaria forms a monophyletic group and sphaerothallioid species form a monophyletic group within Circinaria. The presence of certain morphological characters such as pseudocyphellae, thickness of cortex and medulla layers, as well as ecological differences in sphaerothallioid species distinguish it from some other crustose species, especially those containing aspicilin and characterised by thin cortex and medulla layers, conidium length c. 6 12 µm and absence of pseudocyphellae. If sphaerothallioid species are accepted as a distinct genus, the rest of the Circinaria species would remain as a paraphyletic assemblage. Currently, the genus Circinaria includes all the sphaerothallioid species and its generic position is confirmed and accepted. Thus, it is proposed as a correct generic name also for the manna lichens described originally in other genera. Phylogeny at the species level was studied using nrITS sequence data. Traditionally, morphological characters have been used for the recognition of species. They were re-evaluated in the light of molecular data. Since characters such as vagrant, erratic and crustose growth forms proved to be misleading for the recognition of some species, a combination of several characters (including molecular data) is recommended. Vagrant growth form seems to have evolved several times among the distantly related lineages and even within a single population. The reasons behind the high plasticity in the external morphology of the sphaerothallioid Circinaria remain, however, unknown. Six new species are recognized: Aspicilia tibetica, Circinaria arida, C. digitata nom provis., C. gyrosa nom. provis., C. rogeri nom. provis., and C. rostamii nom. provis. Based on an analysis of nrITS dataset, three new erratic, vagrant and crustose species were also recognized, but these require additional study. The results also reveal that C. elmorei and C. hispida are not monophyletic as currently understood. In addition, 13 new combinations in the genus Circinaria are proposed.

Integrated climatic impacts of forestry and fibre-based packaging

The purpose of this study was to examine the integrated climatic impacts of forestry and the use fibre-based packaging materials. The responsible use of forest resources plays an integral role in mitigating climate change. Forests offer three generic mitigation strategies; conservation, sequestration and substitution. By conserving carbon reservoirs, increasing the carbon sequestration in the forest or substituting fossil fuel intensive materials and energy, it is possible to lower the amount of carbon in the atmosphere through the use of forest resources. The Finnish forest industry consumed some 78 million m3 of wood in 2009, while total of 2.4 million tons of different packaging materials were consumed that same year in Finland. Nearly half of the domestically consumed packaging materials were wood-based. Globally the world packaging material market is valued worth annually some €400 billion, of which the fibre-based packaging materials account for 40 %. The methodology and the theoretical framework of this study are based on a stand-level, steady-state analysis of forestry and wood yields. The forest stand data used for this study were obtained from Metla, and consisted of 14 forest stands located in Southern and Central Finland. The forest growth and wood yields were first optimized with the help of Stand Management Assistant software, and then simulated in Motti for forest carbon pools. The basic idea was to examine the climatic impacts of fibre-based packaging material production and consumption through different forest management and end-use scenarios. Economically optimal forest management practices were chosen as the baseline (1) for the study. In the alternative scenarios, the amount of fibre-based packaging material on the market decreased from the baseline. The reduced pulpwood demand (RPD) scenario (2) follows economically optimal management practices under reduced pulpwood price conditions, while the sawlog scenario (3) also changed the product mix from packaging to sawnwood products. The energy scenario (4) examines the impacts of pulpwood demand shift from packaging to energy use. The final scenario follows the silvicultural guidelines developed by the Forestry Development Centre Tapio (5). The baseline forest and forest product carbon pools and the avoided emissions from wood use were compared to those under alternative forest management regimes and end-use scenarios. The comparison of the climatic impacts between scenarios gave an insight into the sustainability of fibre-based packaging materials, and the impacts of decreased material supply and substitution. The results show that the use of wood for fibre-based packaging purposes is favorable, when considering climate change mitigation aspects of forestry and wood use. Fibre-based packaging materials efficiently displace fossil carbon emissions by substituting more energy intensive materials, and they delay biogenic carbon re-emissions to the atmosphere for several months up to years. The RPD and the sawlog scenarios both fared well in the scenario comparison. These scenarios produced relatively more sawnwood, which can displace high amounts of emissions and has high carbon storing potential due to the long lifecycle. The results indicate the possibility that win-win scenarios exist by shifting production from pulpwood to sawlogs; on some of the stands in the RPD and sawlog scenarios, both carbon pools and avoided emissions increased from the baseline simultaneously. On the opposite, the shift from packaging material to energy use caused the carbon pools and the avoided emissions to diminish from the baseline. Hence the use of virgin fibres for energy purposes, rather than forest industry feedstock biomass, should be critically judged if optional to each other. Managing the stands according to the silvicultural guidelines developed by the Forestry Development Centre Tapio provided the least climatic benefits, showing considerably lower carbon pools and avoided emissions. This seems interesting and worth noting, as the guidelines are the current basis for the forest management practices in Finland.

Design, modelling and simulation of vibratory micromachined gyroscopes

Among various MEMS sensors, a rate gyroscope is one of the most complex sensors from the design point of view. The gyro normally consists of a proof mass suspended by an elaborate assembly of beams that allow the system to vibrate in two transverse modes. The structure is normally analysed and designed using commercial FEM packages such as ANSYS or MEMS specific commercial tools such as Coventor or Intellisuite. In either case, the complexity in analysis rises manyfolds when one considers the etch hole topography and the associated fluid flow calculation for damping. In most cases, the FEM analysis becomes prohibitive and one resorts to equivalent electrical circuit simulations using tools like SABER in Coventor. Here, we present a simplified lumped parameter model of the tuning fork gyro and show how easily it can be implemented using a generic tool like SIMULINK. The results obtained are compared with those obtained from more elaborate and intense simulations in Coventor. The comparison shows that lumped parameter SIMULINK model gives equally good results with fractional effort in modelling and computation. Next, the performance of a symmetric and decoupled vibratory gyroscope structure is also evaluated using this approach and a few modifications are made in this design to enhance the sensitivity of the device.

Multiscale Modeling Approach to Acoustic Emission during Plastic Deformation

We address the long-standing problem of the origin of acoustic emission commonly observed during plastic deformation. We propose a framework to deal with the widely separated time scales of collective dislocation dynamics and elastic degrees of freedom to explain the nature of acoustic emission observed during the Portevin-Le Chatelier effect. The Ananthakrishna model is used as it explains most generic features of the phenomenon. Our results show that while acoustic emission bursts correlated with stress drops are well separated for the type C serrations, these bursts merge to form nearly continuous acoustic signals with overriding bursts for the propagating type A bands.

Bound states of two spin-1/2 fermions in a synthetic non-Abelian gauge field

We study the bound states of two spin-1/2 fermions interacting via a contact attraction (characterized by a scattering length) in the singlet channel in three-dimensional space in presence of a uniform non-Abelian gauge field. The configuration of the gauge field that generates a Rashba-type spin-orbit interaction is described by three coupling parameters (lambda(x),lambda(y),lambda(z)). For a generic gauge field configuration, the critical scattering length required for the formation of a bound state is negative, i.e., shifts to the ``BCS side'' of the resonance. Interestingly, we find that there are special high-symmetry configurations (e.g., lambda(x) = lambda(y) = lambda(z)) for which there is a two-body bound state for any scattering length however small and negative. Remarkably, the bound-state wave functions obtained for such configurations have nematic spin structure similar to those found in liquid He-3. Our results show that the BCS-BEC (Bose-Einstein condensation) crossover is drastically affected by the presence of a non-Abelian gauge field. We discuss possible experimental signatures of our findings both at high and low temperatures.