998 resultados para kartat - historialliset kartat - Pohjoisnapa - 1600-luku


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objective The purpose of this study was to evaluate the retention force of an O-ring attachment system in different inclinations to the ideal path of insertion, using devices to compensate angulations. Material and methods Two implants were inserted into an aluminum base, and ball attachments were screwed to implants. Cylinders with O-rings were placed on ball attachments and connected to the test device using positioners to compensate implant angulations (0 degrees, 7 degrees, and 14 degrees). Plexiglass bases were used to simulate implant angulations. The base and the test device were positioned in a testing apparatus, which simulated insertion/removal of an overdenture. A total of 2900 cycles, simulating 2 years of overdenture use, were performed and 36 O-rings were tested. The force required for each cycle was recorded with computer software. Longitudinal sections of ball attachment-positioner-cylinder with O-rings of each angulation were obtained to analyze the relationship among them, and O-ring sections tested in each angulation were compared with an unused counterpart. A mixed linear model was used to analyze the data, and the comparison was performed by orthogonal contrasts (alpha=0.05). Results At 0 degrees, the retention force decreased significantly over time, and the retention force was significantly different in all comparisons, except from 12 to 18 months. When the implants were positioned at 7 degrees, the retention force was statistically different at 0 and 24 months. At 14 degrees, significant differences were found from 6 and 12 to 24 months. Conclusions Within the limitations of this study, it was concluded that O-rings for implant/attachments perpendicular to the occlusal plane were adequately retentive over the first year and that the retentive capacity of O-ring was affected by implant inclinations despite the proposed positioners. To cite this article:Rodrigues RCS, Faria ACL, Macedo AP, Sartori IAM, de Mattos MGC, Ribeiro RF. An in vitro study of non-axial forces upon the retention of an O-ring attachment.Clin. Oral Impl. Res. 20, 2009; 1314-1319.doi: 10.1111/j.1600-0501.2009.01742.x.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objectives Bacterial penetration along the implant-abutment interface as a consequence of abutment screw loosening has been reported in a number of recent studies. The aim of this in vitro study was to investigate the influence of repeated tightening of the abutment screw on leakage of Streptococcus mutans along the interface between implants and pre-machined abutments. Materials and methods Twenty pre-machined abutments with a plastic sleeve were used. The abutment screws were tightened to 32 N cm in group 1 (n=10 - control) and to 32 N cm, loosened and re-tightened with the same torque twice in group 2 (n=10). The assemblies were completely immersed in 5 ml of Tryptic Soy Broth medium inoculated with S. mutans and incubated for 14 days. After this period, contamination of the implant internal threaded chamber was evaluated using the DNA Checkerboard method. Results Microorganisms were found on the internal surfaces of both groups evaluated. However, bacterial counts in group 2 were significantly higher than that in the control group (P < 0.05). Conclusion These results suggest that bacterial leakage between implants and abutments occurs even under unloaded conditions and at a higher intensity when the abutment screw is tightened and loosened repeatedly. To cite this article:do Nascimento C, Pedrazzi V, Kirsten Miani P, Daher Moreira L, de Albuquerque Junior RF. Influence of repeated screw tightening on bacterial leakage along the implant-abutment interface.Clin. Oral Impl. Res. 20, 2009; 1394-1397.doi: 10.1111/j.1600-0501.2009.01769.x.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background Distraction osteogenesis (DO) is a method of producing new bone directly from the osteotomy site by gradual traction of the divided bone fragments. Aim The purpose of the present study was to evaluate histomorphometrically whether acute DO would constitute a viable alternative to the conventional continuous distraction treatment and also to verify the capacity of a recombinant human BMP (rhBMP-2) associated with monoolein gel to stimulate bone formation in the acute distraction process. Materials and methods Forty-eight Wistar rats were assigned to three groups: Group 1, treated at a conventional continuous distraction rate (0.5 mm/day), Group 2, treated with acute distraction of 2.5 mm at the time of the surgical procedure, and Group 3, subjected to acute distraction associated with rhBMP-2. The animals from each experimental group were killed at the end of the second or fourth post-operative weeks and the volume fraction of newly formed bone trabeculae was estimated in histological images by a differential point-counting method. Results The results showed that after 2 and 4 weeks, bone volumes in the rhBMP-2 group were significantly higher than in the other groups (P < 0.05), but no significant difference was observed in the volume fraction of newly formed bone between the continuous and acute DO groups. Conclusion In conclusion, the study indicates that rhBMP-2 can enhance the bone formation at acute DO, which may potentially reduce the treatment period and complications related to the distraction procedure. To cite this article:Issa JPM, do Nascimento C, Lamano T, Iyomasa MM, Sebald W, de Albuquerque Jr RF. Effect of recombinant human bone morphogenetic protein-2 on bone formation in the acute distraction osteogenesis of rat mandibles.Clin. Oral Impl. Res. 20, 2009; 1286-1292.doi: 10.1111/j.1600-0501.2009.01799.x.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Large (>1600 mum), ingestively masticated particles of bermuda grass (Cynodon dactylon L. Pers.) leaf and stem labelled with Yb-169 and Ce-144 respectively were inserted into the rumen digesta raft of heifers grazing bermuda grass. The concentration of markers in digesta sampled from the raft and ventral rumen were monitored at regular intervals over approximately 144 h. The data from the two sampling sites were simultaneously fitted to two pool (raft and ventral rumen-reticulum) models with either reversible or sequential flow between the two pools. The sequential flow model fitted the data equally as well as the reversible flow model but the reversible flow model was used because of its greater application. The reversible flow model, hereafter called the raft model, had the following features: a relatively slow age-dependent transfer rate from the raft (means for a gamma 2 distributed rate parameter for leaf 0.0740 v. stem 0.0478 h(-1)), a very slow first order reversible flow from the ventral rumen to the raft (mean for leaf and stem 0.010 h(-1)) and a very rapid first order exit from the ventral rumen (mean of leaf and stem 0.44 h(-1)). The raft was calculated to occupy approximately 0.82 total rumen DM of the raft and ventral rumen pools. Fitting a sequential two pool model or a single exponential model individually to values from each of the two sampling sites yielded similar parameter values for both sites and faster rate parameters for leaf as compared with stem, in agreement with the raft model. These results were interpreted as indicating that the raft forms a large relatively inert pool within the rumen. Particles generated within the raft have difficulty escaping but once into the ventral rumen pool they escape quickly with a low probability of return to the raft. It was concluded that the raft model gave a good interpretation of the data and emphasized escape from and movement within the raft as important components of the residence time of leaf and stem particles within the rumen digesta of cattle.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The grain-boundary conductivity (sigma (gb),) of 8-mol%-ytterbiastabilized zirconia increased markedly with heat treatment between 1000 degrees and 1300 degreesC with a slow heating rate (0.1 degreesC/min) before sintering. The extent of the sigma (gb) improvement was the same or larger than that via Al2O3 addition. The heat treatment did not affect the grain-interior conduction when sintered at 1600 degreesC, while Al2O3-derived scavenging significantly did, given the larger increment of total conductivity in the heat-treated sample. The formation of a silicon-containing phase in a discrete form was suggested as a possible route of scavenging the resistive phase from the correlation between average grain size and sigma (gb).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este estudo tem dois objetivos: revisar criticamente a produ????o cient??fica nacional sobre o tema ???compet??ncias no trabalho e nas organiza????es???; e apresentar o conceito e discutir sua utiliza????o no setor p??blico. Para tanto foram analisados relatos de pesquisa emp??rica e ensaios nacionais e estrangeiros ??? em peri??dicos de psicologia e administra????o. Foram discutidos: enfoques te??ricos, instrumentos de coleta de dados, procedimentos de an??lise, entre outros aspectos. Na an??lise da produ????o nacional, constatou-se que, em sua maioria, as pesquisas: descrevem compet??ncias ocupacionais ou profissionais; possuem desenho survey; apresentam pluralidade quanto ?? natureza da pesquisa e utiliza????o de m??todos e t??cnicas para coleta e an??lise de dados; e s??o realizadas principalmente no setor terci??rio da economia. Verificou-se, ainda, a converg??ncia do conceito de compet??ncia, diante da complexidade e fragmenta????o te??rica previamente constatadas na literatura. Entretanto, mesmo em evid??ncia, a produ????o cient??fica brasileira sobre o tema ?? recente e ainda h?? uma lacuna sobre a discuss??o do construto e sua aplica????o no setor p??blico, em especial no caso brasileiro, quando se trata da administra????o p??blica federal, direta, aut??rquica e fundacional.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O sistema cultivo mínimo, por possibilitar pouca movimentação de solo, menor número de operações agrícolas sem incorporação dos resíduos vegetais, apresenta vantagens em razão do menor custo de preparo e da redução das perdas de solo e água. No ano agrícola de 2006/2007, na Fazenda de Ensino e Pesquisa da Faculdade de Engenharia de Ilha Solteira, SP, Brasil - FEIS/UNESP, situada nas condições do Cerrado Brasileiro, objetivou-se analisar a produtividade de massa de matéria seca da consorciação de forragem (guandu+milheto) (MSF), em função de atributos físicos do solo, tais como resistência à penetração (RP), umidade gravimétrica (UG), umidade volumétrica (UV) e densidade do solo (DS) nas profundidades de 0,0-0,10 m; 0,10-0,20 m e 0,20-0,30 m. Para tanto, foi instalado um ensaio, contendo 117 pontos amostrais, em um Latossolo Vermelho distroférrico, sob pivô central, numa área experimental de 1600 m² sob cultivo mínimo. A análise estatística constou de análise descritiva inicial dos atributos e análise das correlações lineares simples entre eles, e, finalmente, de análise geoestatística. Do ponto de vista da correlação espacial, o atributo que mais bem explica a produtividade de massa de matéria seca da consorciação é a densidade do solo na camada de 0,20-0,30 m, com uma correlação inversa, indicando que as espécies se desenvolvem bem em solos adensados.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nos tratores agrícolas, o deslizamento dos rodados ocorre por diversos fatores, entre eles o esforço de tração necessário para deslocar determinado implemento e o tipo de superfície que está em contato com a banda de rodagem dos pneus. Este trabalho tem o objetivo de avaliar o deslizamento do rodado de pneus de um trator em diferentes sistemas de preparo do solo na cultura do milho, no município de Bambuí, Estado de Minas Gerais. O experimento foi conduzido a campo, na safrinha outonal de 2011, na Fazenda Varginha, do Instituto Federal Minas Gerais - campus Bambuí, em um Latossolo Vermelho distroférrico típico. O experimento foi montado em esquema de parcelas sub-subdivididas, tendo, nas parcelas, as operações, nas subparcelas as marchas e, nas sub-subparcelas, as rotações, no delineamento em blocos casualizados, com três repetições, totalizando 81 unidades experimentais. Os fatores e níveis estudados foram (PC) preparo convencional, (CM) cultivo mínimo e (PD) plantio direto. Para cada tratamento, foram utilizadas três marchas (A2, A3 e B1), em três rotações (1600, 1900 e 2200 rpm). Pelos resultados, conclui-se que, no preparo convencional, o maior índice de deslizamento ocorre na operação de semeadura; no cultivo mínimo, na operação de escarificação e, no plantio direto, na operação de semeadura.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A fast and direct surface plasmon resonance (SPR) method for the kinetic analysis of the interactions between peptide antigens and immobilised monoclonal antibodies (mAb) has been established. Protocols have been developed to overcome the problems posed by the small size of the analytes (< 1600 Da). The interactions were well described by a simple 1:1 bimolecular interaction and the rate constants were self-consistent and reproducible. The key features for the accuracy of the kinetic constants measured were high buffer flow rates, medium antibody surface densities and high peptide concentrations. The method was applied to an extensive analysis of over 40 peptide analogues towards two distinct anti-FMDV antibodies, providing data in total agreement with previous competition ELISA experiments. Eleven linear 15-residue synthetic peptides, reproducing all possible combinations of the four replacements found in foot-and-mouth disease virus (FMDV) field isolate C-S30, were evaluated. The direct kinetic SPR analysis of the interactions between these peptides and three anti-site A mAbs suggested additivity in all combinations of the four relevant mutations, which was confirmed by parallel ELISA analysis. The four-point mutant peptide (A15S30) reproducing site A from the C-S30 strain was the least antigenic of the set, in disagreement with previously reported studies with the virus isolate. Increasing peptide size from 15 to 21 residues did not significantly improve antigenicity. Overnight incubation of A15S30 with mAb 4C4 in solution showed a marked increase in peptide antigenicity not observed for other peptide analogues, suggesting that conformational rearrangement could lead to a stable peptide-antibody complex. In fact, peptide cyclization clearly improved antigenicity, confirming an antigenic reversion in a multiply substituted peptide. Solution NMR studies of both linear and cyclic versions of the antigenic loop of FMDV C-S30 showed that structural features previously correlated with antigenicity were more pronounced in the cyclic peptide. Twenty-six synthetic peptides, corresponding to all possible combinations of five single-point antigenicity-enhancing replacements in the GH loop of FMDV C-S8c1, were also studied. SPR kinetic screening of these peptides was not possible due to problems mainly related to the high mAb affinities displayed by these synthetic antigens. Solution affinity SPR analysis was employed and affinities displayed were generally comparable to or even higher than those corresponding to the C-S8c1 reference peptide A15. The NMR characterisation of one of these multiple mutants in solution showed that it had a conformational behaviour quite similar to that of the native sequence A15 and the X-ray diffraction crystallographic analysis of the peptide ? mAb 4C4 complex showed paratope ? epitope interactions identical to all FMDV peptide ? mAb complexes studied so far. Key residues for these interactions are those directly involved in epitope ? paratope contacts (141Arg, 143Asp, 146His) as well as residues able to stabilise a particular peptide global folding. A quasi-cyclic conformation is held up by a hydrophobic cavity defined by residues 138, 144 and 147 and by other key intrapeptide hydrogen bonds, delineating an open turn at positions 141, 142 and 143 (corresponding to the Arg-Gly-Asp motif).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A telenovela é uma forma de narrativa continua e em série com origem na radio, em Cuba, nos anos 40 e desde aí tem-se difundido, através do mundo, como uma forma televisiva, com particular relevância nos países da américa-latina onde o género alcança shares na ordem dos 90%. Na verdade as telenovelas latino-americanas, principalmente as brasileiras e as mexicanas, são neste momento os conteúdos televisi - vos mais exportados. Alguns autores do género, como é o caso do cubano Delia Fiallo, afirmam que mais de 1600 milhões de pessoas vêem estas produções. A ser verdade, este modo de produção seria responsável pela realização do produto televisivo de ficção mais visto de todos os tempos. A telenovela é um parente próximo, da soap opera norte-americana, mas jamais poderá ser considerada como um género gémeo da mesma. A diferença mais importante entre estes dois géneros é que a telenovela embora tenha uma narrativa contínua é concebida a partir de um modelo com um número de episódios prédeterminados e com um fim previsto. Nenhuma das telenovelas latino-americanas tem como opção uma continuidade infindável, como é o caso de «Coronation Street», uma das soap operas mais populares em todo o mundo. A telenovela pode durar 250 e até mesmo 500 episódios mas apresenta-se sempre com um final previsto. A narrativa é frequentemente centrada num acontecimento nuclear que serve como linha condutora. No entanto, existem na telenovela sub-tramas simultâneos, que apoiam a trama principal, mais com um carácter secundário e complementar que como narrativa paralela ou opcional. A primeira telenovela que foi importada pela Europa teve origem no Brasil. A novela de Rede Globo de Televisão, «Gabriela» foi exibida em Portugal em 1996 pelo serviço público de televisão, RTP. Desde aí as telenovela brasileiras têm sido consideradas, continuamente, o conteúdo televisivo mais popular da televisão portuguesa, mesmo após o aparecimento dos canais de televisão privados (SIC e TVI) no início dos anos 90. Como consequência deste fenómeno, Portugal adoptou como sistema o modo de produção brasileiro e adaptou à realização do género nacional um modelo inspirado, particularmente, no esquema produtivo da Rede Globo de Televisão.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Mestrado em Tecnologia de Diagnóstico e Intervenção Cardiovascular. Área de especialização: Intervenção Cardiovascular.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this paper is presenting the recommendation module of the Mathematics Collaborative Learning Platform (PCMAT). PCMAT is an Adaptive Educational Hypermedia System (AEHS), with a constructivist approach, which presents contents and activities adapted to the characteristics and learning style of students of mathematics in basic schools. The recommendation module is responsible for choosing different learning resources for the platform, based on the user's characteristics and performance. Since the main purpose of an adaptive system is to provide the user with content and interface adaptation, the recommendation module is integral to PCMAT’s adaptation model.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Embora a palavra interculturalidade seja recente, a sua prática não o é. Sabemos através da arqueologia, da história e de outras ciências, que o contacto entre povos com culturas diferentes data de há muitos milénios, pois as provas que têm sido encontradas assim o testemunham. Entre os muitos exemplos, podemos referir que foram descobertos no Egito artefactos de origem Síria datados do 5º milénio a.C.; em Israel, encontraram-se fragmentos de cerâmica com símbolos egípcios datados do 3º milénio a.C.; e existem provas de que 1600 anos a.C., estanho proveniente da atual Grã-Bretanha era comercializado em vários locais do continente Europeu

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Copyright © 2014 The Authors. Oikos © 2014 Nordic Society Oikos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The species abundance distribution (SAD) has been a central focus of community ecology for over fifty years, and is currently the subject of widespread renewed interest. The gambin model has recently been proposed as a model that provides a superior fit to commonly preferred SAD models. It has also been argued that the model's single parameter (α) presents a potentially informative ecological diversity metric, because it summarises the shape of the SAD in a single number. Despite this potential, few empirical tests of the model have been undertaken, perhaps because the necessary methods and software for fitting the model have not existed. Here, we derive a maximum likelihood method to fit the model, and use it to undertake a comprehensive comparative analysis of the fit of the gambin model. The functions and computational code to fit the model are incorporated in a newly developed free-to-download R package (gambin). We test the gambin model using a variety of datasets and compare the fit of the gambin model to fits obtained using the Poisson lognormal, logseries and zero-sum multinomial distributions. We found that gambin almost universally provided a better fit to the data and that the fit was consistent for a variety of sample grain sizes. We demonstrate how α can be used to differentiate intelligibly between community structures of Azorean arthropods sampled in different land use types. We conclude that gambin presents a flexible model capable of fitting a wide variety of observed SAD data, while providing a useful index of SAD form in its single fitted parameter. As such, gambin has wide potential applicability in the study of SADs, and ecology more generally.