Kaupallisten komposiittituotteiden materiaaliominaisuuksien määritys ja vertailu

Tässä kandidaatintyössä tutkittiin viiden kaupallisen puu-muovikomposiittituotteen säänkestävyyttä kolmen eri materiaaliominaisuuden avulla. Tuotteet olivat Suomessa markkinoilla olevia terassirakentamisen tuotteita ja niiltä mitattiin Charpy -iskulujuutta, veden absorptiokykyä ja värinmuutosta. Tuloksia verrattiin sekä keskenään, että muualla maailmassa tutkittujen kaupallisten tuotteiden kanssa. Tulosten perusteella havaittiin, että Suomen markkinoilla olevien tuotteiden säänkestävyys on erinomainen.

Development of a process for the direct synthesis of hydrogen peroxide in a novel microstructured reactor

Microreactors have proven to be versatile tools for process intensification. Over recent decades, they have increasingly been used for product and process development in chemical industries. Enhanced heat and mass transfer in the reactors due to the extremely high surfacearea- to-volume ratio and interfacial area allow chemical processes to be operated at extreme conditions. Safety is improved by the small holdup volume of the reactors and effective control of pressure and temperature. Hydrogen peroxide is a powerful green oxidant that is used in a wide range of industries. Reduction and auto-oxidation of anthraquinones is currently the main process for hydrogen peroxide production. Direct synthesis is a green alternative and has potential for on-site production. However, there are two limitations: safety concerns because of the explosive gas mixture produced and low selectivity of the process. The aim of this thesis was to develop a process for direct synthesis of hydrogen peroxide utilizing microreactor technology. Experimental and numerical approaches were applied for development of the microreactor. Development of a novel microreactor was commenced by studying the hydrodynamics and mass transfer in prototype microreactor plates. The prototypes were designed and fabricated with the assistance of CFD modeling to optimize the shape and size of the microstructure. Empirical correlations for the mass transfer coefficient were derived. The pressure drop in micro T-mixers was investigated experimentally and numerically. Correlations describing the friction factor for different flow regimes were developed and predicted values were in good agreement with experimental results. Experimental studies were conducted to develop a highly active and selective catalyst with a proper form for the microreactor. Pd catalysts supported on activated carbon cloths were prepared by different treatments during the catalyst preparation. A variety of characterization methods were used for catalyst investigation. The surface chemistry of the support and the oxidation state of the metallic phase in the catalyst play important roles in catalyst activity and selectivity for the direct synthesis. The direct synthesis of hydrogen peroxide was investigated in a bench-scale continuous process using the novel microreactor developed. The microreactor was fabricated based on the hydrodynamic and mass transfer studies and provided a high interfacial area and high mass transfer coefficient. The catalysts were prepared under optimum treatment conditions. The direct synthesis was conducted at various conditions. The thesis represents a step towards a commercially viable direct synthesis. The focus is on the two main challenges: mitigating the safety problem by utilization of microprocess technology and improving the selectivity by catalyst development.

Risk Assessment of a Supplier in the Pharmaceutical Industry

The topic of this Master’s Thesis is risk assessment in the supply chain, and the work was done for a company operating in the pharmaceutical industry. The unique features of the industry bring additional challenges to risk management, due to high regulatory, docu-mentation and traceability requirements. The objective of the thesis was to generate a template for assessing the risks in the supply chain of current and potential suppliers of the case company. Risks pertaining to the case setting were sought mainly from in-house expertise of this specific product and supply chain as well as academic research papers and theory on risk management. A questionnaire was set up to assess the found risks on impact, occurrence and possibility of detection. Through this classification of the severity of the risks, the supplier assessment template was formed. A questionnaire template, comprised of the top 10 risks affecting the flow of information and materials in this setting, was formulated to serve as a generic tool for assessing risks in the supply chain of a pharmaceutical company. The template was tested on another supplier for usability and accuracy of found risks, and it demonstrated functioning in a differing supply chain and product setting.

Siilot organisaatiokulttuurisena ilmentymänä

Organisaatioiden siiloutuminen on monissa yhteyksissä todettu haasteeksi, jopa kansalliseksi tuottavuusongelmaksi. Organisaatiokulttuurin voimaan kiinnitetään kasvavassa määrin huomiota myös johtamistutkimuksessa. Tämän työn tavoitteena oli tutkia organisaatioteorian eri lähestymistapojen kautta organisaatiokulttuuria ja sen yhteyttä yhtiöstrategian toteuttamiseen asiantuntijaorganisaatiossa, sekä tarkentaa siiloutumista tukevia ja toisaalta yhtenäisen organisaatiokulttuurin kehittymiseen vaikuttavia tekijöitä elinkeinoyhtiökontekstissa. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena seudullisessa elinkeinoyhtiössä. Tutkimusmenetelmänä käytettiin puolistrukturoitua teemahaastattelua. Tutkimuksessa haastateltiin kohdeorganisaation eri yksiköt huomioiden asiakasrajapinnassa toimivaa henkilöstöä, jolla on keskeinen rooli yhtiöstrategian käytännön toteutuksessa. Tutkimuksen tuloksina tunnistettiin asiantuntijaorganisaation sisäisiin rajoihin liittyviä haasteita ja siilomaiseen toimintaan johtavia organisaatiokulttuurisia syitä sekä esitettiin keinoja siilojen poistamiseen. Tutkimuksen tuloksena kiteytettiin myös organisaatiokulttuurisia aktioita, joilla voidaan edistää strategian toteuttamista asiantuntijaorganisaatiossa. Lisäksi tutkimus antoi uutta tutkimuksellista tietoa siiloista tutkimuskohteena olleen elinkeinoyhtiön toimintaympäristön kautta. Tutkimuksen perusteella elinkeinoyhtiökontekstin vaikutukset heijastuvat organisaatiokulttuurissa siiloja ja siiloutumista vahvistavana keskeisimmin kolmesta syystä, joita ovat: 1) julkiselle kehittämisorganisaatiolle asetetut laajat ja osin erisuuntaiset tehtävät, 2) kuntarahoittajien ja yritysasiakkaiden asiakkuusroolien erilaisuus sekä 3) julkisella hankerahoituksella toteutettavat projektit.

Customer value assessment in business markets

Understanding how firms create, communicate, and deliver value to customers is a key factor when firms seek to differentiate in increasingly competitive and commoditized business markets. As product and price have become less important differentiators in many industries, suppliers are increasingly seeking ways to differentiate themselves based on delivered customer value. Therefore, to gain a holistic understanding on what their offerings are worth to the customer, suppliers need to conduct customer value assessment, which quantifies the impact of a supplier´s offering to customers’ costs and returns. However, from a managerial perspective, customer value assessment is the single most critical challenge for firms in business markets. Consequently, developing holistic frameworks for customer value assessment is seen as one of the most important research priorities for marketing research. The purpose of this study is to explore the process of customer value assessment in business markets. Business markets represent a context where an increasing number of industrial firms are transitioning from basic product offerings towards service-based and solution-oriented hybrid offerings, which emphasize value co-creation and realization in the long term, thus making it difficult to quantify their monetary value. This study employs exploratory and qualitative research design by applying inductive and discovery-oriented grounded theory and multiple case research methods. The empirical data comprise interviews with 61 managers from 12 industrial firms, including seven best practice firms in customer value assessment. The findings of this study show that customer value assessment is essentially a crossfunctional process, which involves several organizational functions. The process begins well before and continues long after the actual delivery, often until the end of a supplier´s offering’s life-cycle. Furthermore, the findings shed light on alternative strategies that firms in business markets can adopt to implement the customer value assessment process. Overall, the findings contribute to customer value research, the sales and organizational management literature, the service marketing and solutions business literature, and suggest several managerial implications on how firms in business markets can adopt a holistic approach to assess value created for customers.

Reaching influential early adopters effectively in Finland : Rock Science – new generation board game

Innovations diffuse at different speed among the members of a social system through various communication channels. The group of early adopters can be seen as the most influential reference group for majority of people to base their innovation adoption decisions on. Thus, the early adopters can often accelerate the diffusion of innovations. The purpose of this research is to discover means of diffusion for an innovative product in Finnish market through the influential early adopters in respect to the characteristics of the case product. The purpose of the research can be achieved through the following sub objectives:  Who are the potential early adopters for the case product and why?  How the potential early adopters of the case product should be communicated with?  What would be the expectations, preferences, and experiences of the early adopters of the case product? The case product examined in this research is a new board game called Rock Science which is considered to be incremental innovation bringing board gaming and hard rock music together in a new way. The research was conducted in two different parts using both qualitative and quantitative research methods. This mixed method research began with expert interviews of six music industry experts. The information gathered from the interviews enabled researcher to compose the questionnaire for the quantitative part of the study. Internet survey that was sent out resulted with a sample of 97 responses from the targeted population. The key findings of the study suggest that (1) the potential early adopters for the case product are more likely to be young adults from the capital city area with great interest in rock music, (2) the early adopters can be reached effectively through credible online sources of information, and (3) the respondents overall product feedback is highly positive, except in the case of quality-price ratio of the product. This research indicates that more effective diffusion of Rock Science board game in Finland can be reached through (1) strategic alliances with music industry and media partnerships, (2) pricing adjustments, (3) use of supporting game formats, and (4) innovative use of various social media channels.

Leaching of Sulfentrazone in Soils from the Sugarcane Region in the Northeast Region of Brazil

Sulfentrazone leaching potential is dependent on soil properties such as strength and type of clay, organic matter content and pH, and may result in ineffectiveness of the product and contamination of groundwater. The objective of this study was to evaluate sulfentrazone leaching in five soils of the sugarcane region in the Northeast Region of Brazil, with different physical and chemical properties, by means of bioassay and high-performance liquid chromatography (HPLC) resolution. The experiment was conducted in a split plot in a completely randomized design. The plots had PVC columns with a 10 cm diameter and being 50 cm deep, filled with five different soil classes (quartzarenic neosol, haplic cambisol, yellowish-red latosol, yellowish-red acrisol, and haplic gleysol), and subplots for 10 depths in columns, 5 cm intervals. On top of the columns, sulfentrazone application was conducted and 12 hours later there was a simulated rainfall of 60 mm. After 72 hours, the columns were horizontally placed and longitudinally open, divided into sections of 5.0 cm. In the center of each section of the columns, soil samples were collected for chromatographic analyses and sorghum sowing was carried out as an indicator plant. The bioassay method was more sensitive to detect the presence of sulfentrazone in an assessment for chromatography soil, having provided greater herbicide mobility in quartzarenic neosol and yellowish-red latosol, whose presence was detected by the indicator plant to a depth of 45 and 35 cm, respectively. In the other soils, sulfentrazone was detected up to 20 cm deep. The intense mobility of sulfentrazone in quartzarenic neosol may result in herbicide efficiency loss in the soil because the symptoms of intoxication and the amount of herbicide detected via silica were highest between 15 cm and 35 cm depth regarding the soil surface layer (0-10 cm), indicating that sulfentrazone should be avoided in soils with such characteristics.

Purification of Hydrocarbon Waste Streams

Purification of hydrocarbon waste streams is needed to recycle valuable hydrocarbon products, reduce hazardous impacts on environment, and save energy. To obtain these goals, research must be focused on the search of effective and feasible purification and re-refining technologies. Hydrocarbon waste streams can contain both deliberately added additives to original product and during operation cycle accumulated undesired contaminants. Compounds may have degenerated or cross-reacted. Thus, the presence of unknown species cause additional challenges for the purification process. Adsorption process is most suitable to reduce impurities to very low concentrations. Main advantages are availability of selective commercial adsorbents and the regeneration option to recycle used separation material. Used hydrocarbon fraction was purified with various separation materials in the experimental part. First screening of suitable materials was done. In the second stage, temperature dependence and adsorption kinetics were studied. Finally, one fixed bed experiment was done with the most suitable material. Additionally, FTIR-measurements of hydrocarbon samples were carried out to develop a model to monitor the concentrations of three target impurities based on spectral data. Adsorption capacities of the tested separation materials were observed to be low to achieve high enough removal efficiencies for target impurities. Based on the obtained data, batch process would be more suitable than a fixed bed process and operation at high temperatures is favorable. Additional pretreatment step is recommended to improve removal efficiency. The FTIR-measurement was proven to be a reliable and fast analysis method for challenging hydrocarbon samples.

Competitive advantage through proprietary erp implementation: analysis of the project Väinämö

In the market where companies similar in size and resources are competing, it is challenging to have any advantage over others. In order to stay afloat company needs to have capability to perform with fewer resources and yet provide better service. Hence development of efficient processes which can cut costs and improve performance is crucial. As business expands, processes become complicated and large amount of data needs to be managed and available on request. Different tools are used in companies to store and manage data, which facilitates better production and transactions. In the modern business world the most utilized tool for that purpose is ERP - Enterprise Resource Planning system. The focus of this research is to study how competitive advantage can be achieved by implementing proprietary ERP system in the company; ERP system that is in-house created, tailor made to match and align business needs and processes. Market is full of ERP software, but choosing the right one is a big challenge. Identifying the key features that need improvement in processes and data management, choosing the right ERP, implementing it and the follow-up is a long and expensive journey companies undergo. Some companies prefer to invest in a ready-made package bought from vendor and adjust it according to own business needs, while others focus on creating own system with in-house IT capabilities. In this research a case company is used and author tries to identify and analyze why organization in question decided to pursue the development of proprietary ERP system, how it has been implemented and whether it has been successful. Main conclusion and recommendation of this research is for companies to know core capabilities and constraints before choosing and implementing ERP system. Knowledge of factors that affect system change outcome is important, to make the right decisions on strategic level and implement on operational level. Duration of the project in the case company has lasted longer than anticipated. It has been reported that in cases of buying ready product from vendor, projects are delayed and completed over budget as well. In general, in case company implementation of proprietary ERP has been successful both from business performance figures and usability of system by employees. In terms of future research, conducting a study to calculate statistically ROI of both approaches; of buying ready product and creating own ERP will be beneficial.

Learning information technology business in a changing industry landscape. Introducing Team Entrepreneurship in Renewing Bachelor Education in Renewing Bachelor Education in Information

Speed, uncertainty and complexity are increasing in the business world all the time. When knowledge and skills become quickly irrelevant, new challenges are set for information technology (IT) education. Meta-learning skills – learning how to learn rapidly - and innovation skills have become more essential than single technologies or other specific issues. The drastic changes in the information and communications technology (ICT) sector have caused a need to reconsider how IT Bachelor education in Universities of Applied Sciences should be organized and employed to cope with the change. The objective of the study was to evaluate how a new approach to IT Bachelor education, the ICT entrepreneurship study path (ICT-ESP) fits IT Bachelor education in a Finnish University of Applied Sciences. This kind of educational arrangement has not been employed elsewhere in the context of IT Bachelor education. The study presents the results of a four-year period during which IT Bachelor education was renewed in a Finnish University of Applied Sciences. The learning environment was organized into an ICT-ESP based on Nonaka’s knowledge theory and Kolb’s experiental learning. The IT students who studied in the ICT-ESP established a cooperative and learned ICT by running their cooperative at the University of Applied Sciences. The students (called team entrepreneurs) studied by reading theory in books and other sources of explicit information, doing projects for their customers, and reflecting in training sessions on what was learnt by doing and by studying the literature. Action research was used as the research strategy in this study. Empirical data was collected via theme-based interviews, direct observation, and participative observation. Grounded theory method was utilized in the data analysis and the theoretical sampling was used to guide the data collection. The context of the University of Applied Sciences provided a good basis for fostering team entrepreneurship. However, the results showed that the employment of the ICT-ESP did not fit into the IT Bachelor education well enough. The ICT-ESP was cognitively too tough for the team entrepreneurs because they had two different set of rules to follow in their studies. The conventional courses engaged lot of energy which should have been spent for professional development in the ICT-ESP. The amount of competencies needed in the ICT-ESP for professional development was greater than those needed for any other ways of studying. The team entrepreneurs needed to develop skills in ICT, leadership and self-leadership, team development and entrepreneurship skills. The entrepreneurship skills included skills on marketing and sales, brand development, productization, and business administration. Considering the three-year time the team entrepreneurs spent in the ICT-ESP, the challenges were remarkable. Changes to the organization of IT Bachelor education are also suggested in the study. At first, it should be admitted that the ICT-ESP produces IT Bachelors with a different set of competencies compared to the conventional way of educating IT Bachelors. Secondly, the number of courses on general topics in mathematics, physics, and languages for team entrepreneurs studying in the ICTESP should be reconsidered and the conventional course-based teaching of the topics should be reorganized to support the team coaching process of the team entrepreneurs with their practiceoriented projects. Third, the upcoming team entrepreneurs should be equipped with relevant information about the ICT-ESP and what it would require in practice to study as a team entrepreneur. Finally, the upcoming team entrepreneurs should be carefully selected before they start in the ICT-ESP to have a possibility to eliminate solo players and those who have a too romantic view of being a team entrepreneur. The results gained in the study provided answers to the original research questions and the objectives of the study were met. Even though the IT degree programme was terminated during the research process, the amount of qualitative data gathered made it possible to justify the interpretations done.

A Template for Cloud Technology Deployment in an Energy Trading Environment

Nykyaikaiset pilvipalvelut tarjoavat suurille yrityksille mahdollisuuden tehostaa laskennallista tietojenkäsittelyä. Pilvipalveluiden käyttöönotto tuo mukanaan kuitenkin esimerkiksi useita tietoturvakysymyksiä, joiden vuoksi käyttöönoton tulee olla tarkasti suunniteltua. Tämä tutkimus esittelee kirjallisuuskatsaukseen perustuvan, asteittaisen suunnitelman pilvipalveluiden käyttöönotolle energialiiketoimintaympäristössä. Kohdeyrityksen sisäiset haastattelut ja katsaus nykyisiin energiateollisuuden pilviratkaisuihin muodostavat kokonaiskuvan käyttöönoton haasteista ja mahdollisuuksista. Tutkimuksen päätavoitteena on esittää ratkaisut tyypillisiin pilvipalvelun käyttöönotossa esiintyviin ongelmiin käyttöönottomallin avulla. Tutkimuksessa rakennettu käyttöönottomalli testattiin esimerkkitapauksen avulla ja malli todettiin toimivaksi. Ulkoisten palveluiden herättämien tietoturvakysymysten takia käyttöönoton ensimmäiset osiot, kuten lopputuotteen määrittely ja huolellinen suunnittelu, ovat koko käyttöönottoprosessin ydin. Lisäksi pilvipalveluiden käyttöönotto vaatii nykyiseltä käyttöympäristöltä uusia teknisiä ja hallinnollisia taitoja. Tutkimuksen tulokset osoittavat pilvipalveluiden monipuolisen hyödyn erityisesti laskentatehon tarpeen vaihdellessa. Käyttöönottomallin rinnalle luotu kustannusvertailu tukee kirjallisuuskatsauksessa esille tuotuja hyötyjä ja tarjoaa kohdeyritykselle perusteen tutkimuksen eteenpäin viemiselle.

Palvelutuotteiden strateginen johtaminen suunnitteluliiketoiminnassa

Tutkimuksen tarkoituksena oli löytää suunnitteluliiketoiminnan palvelutuotteiden strategisen johdon käyttöön soveltuva menetelmä, tai työkalu, jonka avulla palvelutuotteiden kilpailukykyä ja kehitystarpeita voidaan helposti arvioida. Diplomityö pitää sisällään kolme tutkimuskysymystä. Ensimmäisellä tutkimuskysymyksellä pyritään keräämään tietoa suunnitteluorganisaation taustalla vaikuttavista menestystekijöistä. Toisen tutkimuskysymyksen avulla pyrittiin löytämään työkalu, tai menetelmä, palvelutuotteiden strategisen johdon käyttöön, tai sellaisen muodostamisen pohjaksi. Kolmas tutkimuskysymys liittyi suunnittelupalveluiden strategisen johtamisen työkalun muodostamiseen. Tutkimuksen tuloksena tuotettiin suunnitteluorganisaation palvelutuotteiden johtamisen viitekehys. Viitekehyksessä palvelutuotteet lajitellaan havainnolliselle luokittelutaululle, jossa pystykoordinaattina käytetään palvelutuotteen markkinoiden houkuttelevuutta ja vaakakoordinaattina palvelutuotteen vahvuutta organisaatiossa. Tutkimuksessa on esitetty suunnitteluliiketoiminnan strategisen johtamisen onnistumisessa vaikuttavat taustatekijät, markkinoiden houkuttelevuuden keskeisimmät mittarit, sekä suunnittelupalveluiden vahvuutta kuvaavat tekijät.

Possibility Of Controlling The Atmosphere Inside A Package Using Microperforation

This work focuses on the study of the determination on the possibilities of controlling the required moisture within the inside of film sealed packages. The task is based on the challenges faced by fresh food producers in actualizing a longer product shelf-life coupled with the growing complex desires coming from consumers in the aspect of quality. One way to realize this is by proper evaluation on the use of the flexible plastic films through permeation measurements on the required amount of moisture penetrating through the plastic film with the application of microperforation. A packaging material requires proper interaction on moisture transmission, between the product and the outside environment. The plastic film material that stands between, fresh fruits, vegetables and the outside environment could have appropriate respiration rates through possible micro holes. This work simulates similar process with the aid of water vapor transmission rate (WVTR) experiment using anhydrous CaCl2 as the desiccant, in studying the WVTR values of various perforated film materials at different conditions of storage (standard, fridge, and tropical conditions). However, the results showed absorption rates of water vapor at various conditions in grams of H2O/m2/24h.

Time to volume through efficient multi-site ramp-up

The aim of this thesis was to create a process for all multi-site ramp-up (MSRU) projects in the case company in order to have simultaneous ramp-ups early in the market. The research was done through case study in one company and semi-structured interviews. There are already processes, which are now in use in MSRU-cases. Interviews of 20 ramp-up specialists revealed topics to be improved. Those were project team set up, roles and responsibilities and recommended project organization, communication, product change management practices, competence and know how transfer practices and support model. More R&D support and involvement is needed in MSRU-projects. DCM’s role is very important in the MSRU-projects among PMT-team; he should be the business owner of the project. Recommendation is that product programs could take care of the product and repair training of new products in volume factories. R&D’s participation in competence transfers is essential important in MSRU-projects. Communication in projects could be shared through special intranet commune. Blogging and tweeting could be considered in the communication plan. If hundreds of change notes are open in ramp-up phase, it should be considered not to approve the product into volume ramp-up. PMTs’ supports are also important and MSRU-projects should be planned, budgeted and executed together. Finally a new MSRU-process is presented in this thesis to be used in all MSRU-projects.

Harvesterin sahalaipan jatkotutkimus ja tuotteistaminen

Tämän diplomityön tavoitteena oli saavuttaa Joensuun CNC-Machining Oy:n aloittama harvesterinlaipan kehitystyö loppuun. Kehitystyön oli aloittanut vuonna 2012 Teemu Tuominen omalla opinnäytetyöllään, joka keskittyi suunnittelua ja valmistusta rajoittavien patenttien selvittämiseen sekä laipan valmistuksessa käytettyjen materiaalien selvittämiseen. Kirjallisuuskatsauksen ja puutuvien tietojen hankinnan jälkeen tarkasteluun otettiin aiemmin valmistettu prototyyppi sekä rikkoutuneita käytetyjä laippoja. Näistä laipoista tehtiin havaintoja esille nousevista ongelmakohdista, joiden perusteella tässä työssä suunnitelmaa päivitettiin ja asetettiin vaatimukset uudelle prototyypille. Kokonaisrakenteen suunnittelun jälkeen keskityttiin viimeistelemään osatoiminnallisuuksien yksityiskohdat. Suunnittelun tulosten perusteella valmistettiin laipasta prototyyppisarja, joista kahdella suoritettiin todellista käyttöä vastaava koeajo. Koeajon aikana ja jälkeen laippojen käyttäytymisestä ja suorituskyvystä tehtiin havaintoja. Valmistuksesta ja koeajosta saaduilla tiedoilla laippamallia kehitetään kohti markkinakelpoista tuotetta ja tuoteperhettä kasvatetaan eri mallisilla laipoilla.