Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications

The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.

Grain size analyses in tin-lead glazes based on 2d-sections

A problem in the archaeometric classification of Catalan Renaissance pottery is the fact, that the clay supply of the pottery workshops was centrally organized by guilds, and therefore usually all potters of a single production centre produced chemically similar ceramics. However, analysing the glazes of the ware usually a large number of inclusions in the glaze is found, which reveal technological differences between single workshops. These inclusions have been used by the potters in order to opacify the transparent glaze and to achieve a white background for further decoration. In order to distinguish different technological preparation procedures of the single workshops, at a Scanning Electron Microscope the chemical composition of those inclusions as well as their size in the two-dimensional cut is recorded. Based on the latter, a frequency distribution of the apparent diameters is estimated for each sample and type of inclusion. Following an approach by S.D. Wicksell (1925), it is principally possible to transform the distributions of the apparent 2D-diameters back to those of the true three-dimensional bodies. The applicability of this approach and its practical problems are examined using different ways of kernel density estimation and Monte-Carlo tests of the methodology. Finally, it is tested in how far the obtained frequency distributions can be used to classify the pottery

Interactions between grain size and composition of sediments: two examples

Two contrasting case studies of sediment and detrital mineral composition are investigated in order to outline interactions between chemical composition and grain size. Modern glacial sediments exhibit a strong dependence of the two parameters due to the preferential enrichment of mafic minerals, especially biotite, in the fine-grained fractions. On the other hand, the composition of detrital heavy minerals (here: rutile) appears to be not systematically related to grain-size, but is strongly controlled by location, i.e. the petrology of the source rocks of detrital grains. This supports the use of rutile as a well-suited tracer mineral for provenance studies. The results further suggest that (i) interpretations derived from whole-rock sediment geochemistry should be flanked by grain-size observations, and (ii) a more sound statistical evaluation of these interactions require the development of new tailor-made statistical tools to deal with such so-called two-way compositions

A Log-linear model of grain size influence on the geochemistry of sediments

Sediment composition is mainly controlled by the nature of the source rock(s), and chemical (weathering) and physical processes (mechanical crushing, abrasion, hydrodynamic sorting) during alteration and transport. Although the factors controlling these processes are conceptually well understood, detailed quantification of compositional changes induced by a single process are rare, as are examples where the effects of several processes can be distinguished. The present study was designed to characterize the role of mechanical crushing and sorting in the absence of chemical weathering. Twenty sediment samples were taken from Alpine glaciers that erode almost pure granitoid lithologies. For each sample, 11 grain-size fractions from granules to clay (ø grades <-1 to >9) were separated, and each fraction was analysed for its chemical composition. The presence of clear steps in the box-plots of all parts (in adequate ilr and clr scales) against ø is assumed to be explained by typical crystal size ranges for the relevant mineral phases. These scatter plots and the biplot suggest a splitting of the full grain size range into three groups: coarser than ø=4 (comparatively rich in SiO2, Na2O, K2O, Al2O3, and dominated by “felsic” minerals like quartz and feldspar), finer than ø=8 (comparatively rich in TiO2, MnO, MgO, Fe2O3, mostly related to “mafic” sheet silicates like biotite and chlorite), and intermediate grains sizes (4≤ø <8; comparatively rich in P2O5 and CaO, related to apatite, some feldspar). To further test the absence of chemical weathering, the observed compositions were regressed against three explanatory variables: a trend on grain size in ø scale, a step function for ø≥4, and another for ø≥8. The original hypothesis was that the trend could be identified with weathering effects, whereas each step function would highlight those minerals with biggest characteristic size at its lower end. Results suggest that this assumption is reasonable for the step function, but that besides weathering some other factors (different mechanical behavior of minerals) have also an important contribution to the trend. Key words: sediment, geochemistry, grain size, regression, step function

Statistical treatment of grain-size curves and empirical distributions: densities as compositions?

The preceding two editions of CoDaWork included talks on the possible consideration of densities as infinite compositions: Egozcue and D´ıaz-Barrero (2003) extended the Euclidean structure of the simplex to a Hilbert space structure of the set of densities within a bounded interval, and van den Boogaart (2005) generalized this to the set of densities bounded by an arbitrary reference density. From the many variations of the Hilbert structures available, we work with three cases. For bounded variables, a basis derived from Legendre polynomials is used. For variables with a lower bound, we standardize them with respect to an exponential distribution and express their densities as coordinates in a basis derived from Laguerre polynomials. Finally, for unbounded variables, a normal distribution is used as reference, and coordinates are obtained with respect to a Hermite-polynomials-based basis. To get the coordinates, several approaches can be considered. A numerical accuracy problem occurs if one estimates the coordinates directly by using discretized scalar products. Thus we propose to use a weighted linear regression approach, where all k- order polynomials are used as predictand variables and weights are proportional to the reference density. Finally, for the case of 2-order Hermite polinomials (normal reference) and 1-order Laguerre polinomials (exponential), one can also derive the coordinates from their relationships to the classical mean and variance. Apart of these theoretical issues, this contribution focuses on the application of this theory to two main problems in sedimentary geology: the comparison of several grain size distributions, and the comparison among different rocks of the empirical distribution of a property measured on a batch of individual grains from the same rock or sediment, like their composition

Investigación del uso de las tecnologías de información y comunicaciones en la industria logística en Bogotá

Este trabajo de investigación contiene inicialmente una presentación del marco teórico el cual consiste de una breve descripción de la historia de la logística, y del desarrollo de la disciplina de la administración de la cadena de abastecimiento, también denominada gestión de la cadena de suministro. La globalización de los mercados y el incremento de la competencia a nivel mundial, entre otros factores, ha generado varias disciplinas de investigación y desarrollo empresarial bajo la sombrilla de la administración de la cadena de abastecimiento. Dichas disciplinas también se describen brevemente en este trabajo. Luego presentamos una descripción corta de algunas de las tecnologías de la información utilizadas para incrementar la eficiencia en los procesos empresariales. Posteriormente planteamos la investigación del impacto de las tecnologías de la información en empresas del sector logístico en Bogotá, Colombia, que prestan servicios tales como almacenamiento, transporte, intermediación aduanera y operaciones en puerto. Para el desarrollo de dicha investigación, se plantea una encuesta de diez preguntas básicas. Finalmente presentamos los resultados de la investigación, con sus conclusiones y recomendaciones, en donde se evidencia el impacto del tamaño de las empresas y los mercados a los que sirven en la motivación y las barreras para implementar tecnologías de la información en sus procesos y procedimientos.

How do I set up my thesis so it meets the University's Page Setup regulations for paper size and margins?

This video shows how to ensure the document: • has mirror margins that alternate on left and right hand pages • is A4 in size • has margins that are in-line with the regulations • has its major sections starting on the right hand (odd numbered) page Although this video shows how to perform these tasks in Word 2010, they are virtually identical in Word 2013. In Word 2011 for Mac the steps are very similar and precise details can be found in the Word 2011 Sections manual.

Las interacciones organizacionales desde la visión ecológica: la competencia

Como parte del trabajo de doctorado de la Señora Ángela Lucia Noguera Hidalgo, el presente documento reúne un compilado de las diversas fuentes relacionadas con el concepto biológico de la “competencia” y su relación con las organizaciones. Es un trabajo en donde a partir de las investigaciones ya existentes se realiza un resumen concienzudo sobre el tema, logrando de este modo un estado del arte.

The Intrapreneur Innovation:Led by Medium and Small Size Companies‘Managers*(Qualitative Research)

This research is focused on an exploratory study developed with Pymes managers and theirroles as intrapreneurs. Using their leadership to impel innovation into organizations.Looking to determined how Pymes employers incentive into organizations individuals or groupinnovations. Therefore, it is possible to think that managers lead the innovation process, whichis classified gradually according to companies needs in order to improve their competitiveness.Organization must have intrapreneuring and organized culture with flexible structure to generateindividual autonomy. A characteristic is the amount of capital risk needed; that is why it isnecessary encourage their work and their risk tolerance.

Advances and limitations in the attention to the problems of housing and urban land in Mexico. An approach from the legal-institutional frame

In this work we analyze the reforms carried out by the Mexican state in the nineties of the 20th century, in the items concerning the policies of housing and urban land, based on an exhaustive review of the main actions, programs and changes in the legal and institutional frame that applies for each of these fields. The nineties represent a "breaking point" in the way the State considers the satisfaction of the right to the housing and attends the offer of urbanized land for a tidy and sustainable urban development. In this period of time, the approach of direct intervention in developing and financing housing and creation of land reserves has changed into another one, ruled by the logic of the market. The balance to the first decade of the 21st century is ambiguous, as neither the housing policy has solved the housing shortage for low-income population, nor the land policy has eliminated the illegal urban growth.

The cyclical behavior of bank capital buffers in an emerging economy: size do matters

Using a panel of Colombian banks and quarterly data between 1996:1 and 2010:3, we study the relationship between short-run adjustemnts in bank capital buffers and the business cycle. We follow a partial adjustment framework and control for several variables that have been identified as important determinants of bank capital buffers in previous studies, and find that bank capital buffers vary over the business cycle. We are able to identify a negative co-movement of capital buffers and and the business cycle. However, we also find that capital buffers of small and large banks behave asymmetrically during the business cycle. While the former appear to be constant over time, once the appropriate set of control variables is used, the latter present a countercyclical behavior. Our results suggest the possible need of the implementation of regulatory policy measures in developing countries

Size poems.

Esta selección de poesía se ha elegido para que coincida con temas de interés para el grupo de edad: tamaño. Aunque los poemas son completamente independientes de otras historias, pueden ser introducidos junto con libros de cuentos. Destinado a escuelas infantiles, puede utilizarse para el trabajo curricular transversal, así como para la enseñanza de la lectura y el disfrute de la poesía, ritmo y rima. Desarrolla en los niños habilidades fonológicas y el conocimiento de la rima y los introduce en la poesía desde las primeras etapas de la lectura. Ofrece orientación para hablar y escuchar, con especial atención a la lectura en voz alta.

Sample size requirements for interval estimation of the strengthof association effect sizes in multiple regression analysis

Resumen tomado de la publicación

Sample size planning for multiple correlation : reply to Shieh (2013)

Resumen tomado de la publicaci??n

Application of a relational frame theory account of psychological flexibility in young children

Resumen tomado de la publicaci??n