PDMS biofunctionalization study for the development of a microfluidic device: Application to salivary cortisol

The authors acknowledge to Sofia Neves from ICVS for her help in the antibodies selection.

Analytical evaluation of fining treatments for white wines contaminated by Ochratoxin A

Mycotoxins are toxic secondary metabolites produced by certain molds. Ochratoxin A (OTA) is one of the most relevant. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. OTA in wine is a risk to consumer health [1]. According to the Regulation No. 123/2005 of the European Commission, the maximum limit for OTA in wine is 2 µg/kg [2]. Then, it is important to control its occurrence. So, the aim of this work was to know the effect of different fining agents on OTA removal from white wine.

Aromatic amines sources, environmental impact and remediation

Aromatic amines are widely used industrial chemicals as their major sources in the environment include several chemical industry sectors such as oil refining, synthetic polymers, dyes, adhesives, rubbers, perfume, pharmaceuticals, pesticides and explosives. They result also from diesel exhaust, combustion of wood chips and rubber and tobacco smoke. Some types of aromatic amines are generated during cooking, special grilled meat and fish, as well. The intensive use and production of these compounds explains its occurrence in the environment such as in air, water and soil, thereby creating a potential for human exposure. Since aromatic amines are potential carcinogenic and toxic agents, they constitute an important class of environmental pollutants of enormous concern, which efficient removal is a crucial task for researchers, so several methods have been investigated and applied. In this chapter the types and general properties of aromatic amine compounds are reviewed. As aromatic amines are continuously entering the environment from various sources and have been designated as high priority pollutants, their presence in the environment must be monitored at concentration levels lower than 30 mg L1, compatible with the limits allowed by the regulations. Consequently, most relevant analytical methods to detect the aromatic amines composition in environmental matrices, and for monitoring their degradation, are essential and will be presented. Those include Spectroscopy, namely UV/visible and Fourier Transform Infrared Spectroscopy (FTIR); Chromatography, in particular Thin Layer (TLC), High Performance Liquid (HPLC) and Gas chromatography (GC); Capillary electrophoresis (CE); Mass spectrometry (MS) and combination of different methods including GC-MS, HPLC-MS and CE-MS. Choosing the best methods depend on their availability, costs, detection limit and sample concentration, which sometimes need to be concentrate or pretreated. However, combined methods may give more complete results based on the complementary information. The environmental impact, toxicity and carcinogenicity of many aromatic amines have been reported and are emphasized in this chapter too. Lately, the conventional aromatic amines degradation and the alternative biodegradation processes are highlighted. Parameters affecting biodegradation, role of different electron acceptors in aerobic and anaerobic biodegradation and kinetics are discussed. Conventional processes including extraction, adsorption onto activated carbon, chemical oxidation, advanced oxidation, electrochemical techniques and irradiation suffer from drawbacks including high costs, formation of hazardous by-products and low efficiency. Biological processes, taking advantage of the naturally processes occurring in environment, have been developed and tested, proved as an economic, energy efficient and environmentally feasible alternative. Aerobic biodegradation is one of the most promising techniques for aromatic amines remediation, but has the drawback of aromatic amines autooxidation once they are exposed to oxygen, instead of their degradation. Higher costs, especially due to power consumption for aeration, can also limit its application. Anaerobic degradation technology is the novel path for treatment of a wide variety of aromatic amines, including industrial wastewater, and will be discussed. However, some are difficult to degrade under anaerobic conditions and, thus, other electron acceptors such as nitrate, iron, sulphate, manganese and carbonate have, alternatively, been tested.

Microfluidic based on aqueous two-phase system for plasmidic DNA purification

Dissertação de mestrado em Bioquímica Aplicada (área de especialização em Biotecnologia)

Requisitos de gestão e técnicos no Laboratório de Análises das Águas do Porto à luz da norma NP EN ISO-IEC 17025

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Determinação de psicofármacos em cabelo humano por técnicas cromatográficas hifenadas: um método alternativo não-invasivo

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Ensaios de controlo de qualidade em sabões e sabonetes

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

New percutaneous techniques for perforating the pulmonary valve in pulmonary atresia with intact ventricular septum

We report new percutaneous techniques for perforating the pulmonary valve in pulmonary atresia with intact ventricular septum, in 3 newborns who had this birth defect. There was mild to moderate hypoplastic right ventricle, a patent infundibulum, and no coronary-cavitary communications. We succeeded in all cases, and no complications related to the procedure occurred. The new coaxial radiofrequency system was easy to handle, which simplified the procedure. Two patients required an additional source of pulmonary flow (Blalock-Taussig shunt) in the first week after catheterization. All patients had a satisfactory short-term clinical evolution and will undergo recatheterization within 1 year to define the next therapeutic strategy. We conclude that this technique may be safely and efficiently performed, especially when the new coaxial radiofrequency system is used, and it may become the initial treatment of choice in select neonates with pulmonary atresia and intact ventricular septum.

Optimization techniques to detect early ventilation extubation in intensive care units

The decision support models in intensive care units are developed to support medical staff in their decision making process. However, the optimization of these models is particularly difficult to apply due to dynamic, complex and multidisciplinary nature. Thus, there is a constant research and development of new algorithms capable of extracting knowledge from large volumes of data, in order to obtain better predictive results than the current algorithms. To test the optimization techniques a case study with real data provided by INTCare project was explored. This data is concerning to extubation cases. In this dataset, several models like Evolutionary Fuzzy Rule Learning, Lazy Learning, Decision Trees and many others were analysed in order to detect early extubation. The hydrids Decision Trees Genetic Algorithm, Supervised Classifier System and KNNAdaptive obtained the most accurate rate 93.2%, 93.1%, 92.97% respectively, thus showing their feasibility to work in a real environment.

Projeto de um centro de reabilitação física no complexo do Forte Portuense em Roma

Dissertação de mestrado integrado em Arquitectura (área de especialização em Cultura Arquitectónica)

Devices and Techniques for Blood Pressure Measurement and Criteria for Hypertension Adopted by Brazilian Physicians: Exploratory Study

OBJECTIVE: To determine technical procedures and criteria used by Brazilian physicians for measuring blood pressure and diagnosing hypertension. METHODS: A questionnaire with 5 questions about practices and behaviors regarding blood pressure measurement and the diagnosis of hypertension was sent to 25,606 physicians in all Brazilian regions through a mailing list. The responses were compared with the recommendations of a specific consensus and descriptive analysis. RESULTS: Of the 3,621 (14.1%) responses obtained, 57% were from the southeastern region of Brazil. The following items were reported: use of an aneroid device by 67.8%; use of a mercury column device by 14.6%; 11.9% of the participants never calibrated the devices; 35.7% calibrated the devices at intervals < 1 year; 85.8% measured blood pressure in 100% of the medical visits; 86.9% measured blood pressure more than once and on more than one occasion. For hypertension diagnosis, 55.7% considered the patient's age, and only 1/3 relied on consensus statements. CONCLUSION: Despite the adequate frequency of both practices, it was far from that expected, and some contradictions between the diagnostic criterion for hypertension and the number of blood pressure measurements were found. The results suggest that, to include the great majority of the medical professionals, disclosure of consensus statements and techniques for blood pressure measurement should go beyond the boundaries of medical events and specialized journals.

Assessment of the techniques of blood pressure measurement by health professionals

OBJECTIVE: To assess blood pressure measurement by health professionals of a public hospital in São Paulo State. METHODS: Semi-structured interviews and direct observation were performed with a verification list according to the criteria reported by Perloff et al. One hundred and five health professionals took part in the study. After measuring blood pressure, the level of concordance between the way the procedure was performed and the recommended one was assessed. RESULTS: Nurses and nurse's aides abided by 40% of the recommended procedures for adequate blood pressure measurement. The other categories of health professionals (nursing and medicine teachers, physicians, residents, and nursing students) abided by approximately 70%. CONCLUSION: Permanent educational activities aiming at standardizing blood pressure measurement should be implemented among the different categories of health professionals.

Técnicas Experimentales para Caracterizar Flujos Complejos. Experimental techniques for complex flows characterization.

En ambientes fluviales, la interacción del flujo con la geometría del cauce y con los sedimentos del lecho define una dinámica turbulenta compleja en permanente evolución. El nivel de complejidad del flujo aumenta ante la presencia de estructuras hidráulicas (pilas de puentes, protecciones contra erosión, etc.). La mayoría de los ríos, o canales naturales, presentan confluencias y bifurcaciones, en donde se genera una convergencia (o divergencia) del flujo con el resultado de un ambiente hidrodinámico complejo en la cercanía de las uniones (Kenworthy y Rhoads 1995). Bajo estas condiciones no es posible extrapolar las soluciones tradicionales básicas de las ecuaciones de gobierno desarrolladas para canales rectos y uniformes. Algunas investigaciones experimentales realizadas en estos sistemas son las de Best (1988), Rhoads y Sukhodolov (2001), Richardson et al. (1996); Richardson y Thorne (1998, 2001); Parsons et al. (2004); Szupiany et al. (2005).Por otro lado, la zona costera en ambientes marítimos se caracteriza por la existencia de diversos procesos dinámicos, entre los que se destacan la acción de olas, corrientes, interacción olas-corrientes, transporte de sedimentos y cambios batimétricos. Estos se manifiestan en una alteración morfodinámica de la playa generando superficies potenciales de erosión. Así, el diseño de las protecciones costeras (ya sean continuas, como escolleras o muros verticales; o discontinuas como espigones o diques externos) sometidas al clima marítimo bajo distintas condiciones de olas y mareas, alteran los patrones de circulación y de transporte afectando la morfodinámica en su zona de influencia y plantean, por ejemplo, la necesidad de ajustes de los coeficientes de estabilidad y pesos de los bloques de roca de las escolleras. Los problemas generados, son especialmente complejos ya que deben considerarse para su estudio, los niveles de turbulencia, la transmisión del oleaje sobre o a través de la estructura, difracción alrededor de la misma, refracción y shoaling sobre un fondo dinámico, reflexión en la estructura, etc. (Alsina et al., 2007) Revisiones bibliográficas previas muestran que, en ambos ambientes (fluvial y marítimo), es necesario optimizar las técnicas experimentales existentes para que ellas permitan caracterizar con precisión los flujos turbulentos complejos presentes. El objetivo general propuesto en esta investigación es contribuir a mejorar el conocimiento de los procesos hidrodinámicos de flujos turbulentos naturales con y sin la presencia de estructuras hidráulicas que den lugar a formaciones complejas (3D). Para alcanzar este objetivo se propone realizar una recopilación de antecedentes y un análisis crítico detallado de los equipos de ultima generación para mediciones de flujo con alta frecuencia y resolución disponibles en el Laboratorio de Hidráulica (LH) de la Universidad Nacional de Córdoba (UNC): ADV 3D (Acoustic Doppler Velocimeter de Sontek) y laser PIV 2D (Particle Image Velocimeter de Dantec). A estos equipamientos se le agrega un moderno equipo de generación bidimensional de oleaje con absorción dinámica (adquiridos a HR Ltd. en 2007 por el CAI 085 del FONTAR). Finalmente se prevé utilizar este equipamiento durante el desarrollo de experimentos y mediciones los cuales se realizarán sobre modelos físicos fluviales y costeros diseñados y construidos con y sin estructuras que interactúen con flujo turbulentos complejos. Los resultados obtenidos en este proyecto permitirá alcanzar una mejor comprensión de los procesos hidrodinámicos de los flujos turbulentos complejos, lo cual es necesario y de gran utilidad para realizar un manejo apropiado de los ambientes fluviales y marítimos, teniendo como campo directo de aplicación el correcto diseño de estructuras hidráulicas, asistiendo a la toma de medidas correctivas en sistemas naturales sometidos a procesos erosivos o de sedimentación, y contribuyendo de esta forma al manejo ambientalmente sustentable de los recursos.

Procesos adaptativos y dimensiones del comportamiento biosocial en cazadores recolectores del SW de la provincia de La Pampa.

Resumen del proyecto: Este resumen se incluirá en la base de datos de la Biblioteca Digital del Ministerio, por lo que se debe elaborar el mismo sobre la base de la siguiente estructura y completar todos los campos que se indican a continuación: identificación y caracterización del problema objeto del estudio, hipótesis, planteo de objetivos, materiales y métodos a utilizar, resultados esperados, importancia del proyecto (extensión del campo 4000 caracteres). Proyecto diseñado para aportar al conocimiento de los procesos adaptativos y la dinámica biosocial de las sociedades del pasado prehistórico argentino. Propone analizar y evaluar el potencial documental de los restos bioarqueológicos con fehaciente asociación contextual para posibilitar la realización de inferencias sobre procesos biosociales de naturaleza adaptativa o no adaptativa. Está centrado en el análisis osteológico y biocultural de materiales esqueletales (aproximadamente cien individuos) correspondientes a poblaciones aborígenes prehistóricas del actual territorio de la provincia de La Pampa (Médano Petroquímica, Departamento Puelén). Entre otros muchos aspectos, la importancia de estos materiales reside en que son asignables a sociedades con economía cazadora-recolectora y cuya cronología corresponde al Holoceno tardío final (Entierros datados en 393 ± 41 cal AP AMS.), una época particularmente interesante por la dinámica sucesión de eventos socioculturales y poblacionales que la caracterizan. La evidencia recuperada da cuenta de prácticas funerarias complejas que consisten en la realización de enterratorios colectivos, indirectos, secundarios, y presencia de eventos de violencia y/o tensión social. Los métodos y técnicas consisten en la descripción e identificación basados en observación y registro de marcadores esqueléticos conforme a prácticas estándares de nuestro laboratorio: Planillas de observación y registro durante excavaciones de la Archaeological Summer Field School (ASFS) de la Universidad de Chicago y planillas de los “Standards” de Buikstra y Ubelaker, modificadas y adaptadas por nuestro grupo de trabajo, entre otros). Los datos obtenidos serán empleados para graficación (estadística descriptiva) y también se realizará sobre ellos análisis multivariados y estadística no paramétrica (etapa inferencial). Se tendrán en cuenta aspectos descriptivos y analíticos vinculados con el reconocimiento de la edad y el sexo, hábitos dietarios (marcadores morfológicos y químicos de hueso y dientes), economía de subsistencia, patrones de diferenciación social, exploración de eventuales relaciones de parentesco, roles vinculados con el sexo, el uso del cuerpo, dieta, salud y enfermedad, en relación con la economía de subsistencia, etc. (Buikstra y Beck 2006, Larsen, 1997, White y Folkens 2000). Dado la naturaleza y complejidad de los hallazgos, caracterizados por la conformación de entierros colectivos secundarios e indirectos, un capítulo de interés lo constituye el análisis de las dimensiones sociales del comportamiento mortuorio y la discusión de los indicadores de violencia y/o tensión social asociados a los hallazgos (O´Shea 1984, Rakita et al. 2005, entre otros). Dado el hecho de que se cuenta con la disponibilidad de materiales adecuados para este tipo de estudios, la información relevante y los datos a analizar serán obtenidos mediante la aplicación de métodos y técnicas bioarqueológicas específicas antes mencionados, con la finalidad de observar y discutir tendencias y proponer modelos de interpretación sujetos a ulterior validación, particularmente toda vez que se cuente con una mayor representación numérica y casuística tanto a nivel de individuos como de sitios bioarqueológicos excavados. El proyecto se enmarca en la firma de un Convenio Específico de Trabajo entre la UNRC y el Gobierno de La Pampa. Palabras clave: Ingrese hasta 5 palabras clave, distintas de las utilizadas en el título del proyecto y que describan la naturaleza del objeto de estudio. bioarqueología economía cazadora-recolectora adaptación biosocial comportamiento mortuorio Violencia y tensión social. Abstract: Resumen del proyecto en inglés (extensión del campo 2000 caracteres). This project has been designed to improve the knoledge on adaptive processes and biosocial dynamics among aborigine past societies in Argentina. This research is focused on the analysis and evaluation of documentary potential of bioarchaeological skeletal remains with reliable contextual associations. It is specifically centered in the osteological as well as cultural analysis of more than one hundred skeletons from native prehistoric populations from a prehistoric collective burial site in La Pampa province. (Médano Petroquímica, Departamento Puelén). Among other aspects, the importance of the materials to be analyzed lies in the fact that they correspond to a subsistence economy based on hunting and gathering, and have been chronologically assigned to Late Holocene times (burials dated 393 ± 41 cal AP AMS), a period denoting particular interest due to the dynamic succession of sociocultural events that characterized it. Evidence so far recovered accounts for complex funerary practices consisting of indirect, secondary collective burials, as well as the presence of events of violence and/o social tension. Methods and techniques consist in the description and identification based on the observation, and recording of skeletal markers, according to laboratory as well as field work standards: The University of Chicago Archaeological Summer Field School (ASFS) forms, and the “Standards” forms from Buikstra y Ubelaker (1994), modified and adapted by our research team, among others. Data obtained shall be used for graphic (descriptive statistics) as well as multivariate analyses and non parametric statistics (inferential stage). Descriptive as well as analytical aspects such as those related to age and sex determination, feeding habits (morphological as well as chemical markers of bones and teeth), subsistence economy, patterns of social differentiation, kinship patterns, sex-linked roles, body use, diet, health and disease, all of them in close relationship with the hunter-gatherer subsistence economy (Buikstra y Beck 2006, Larsen, 1997, White y Folkens 2000). Given the nature and complexity of the burial disposals, characterized by complex collective burials, a core chapter of our interest is that of social dimensions of mortuary behavior as well as the discussion and interpretation of markers of violence and/or social tension. Given the amount of evidence gathered so far, relevant information as well as data to be analyzed will be obtained by specific bioarchaeological methods and techniques, trying to observe and discuss possible trends as well as to formulate interpretive models to be verified or rejected with the arrival of new, reliable data both at individual level as well as at the archaeological sites to be excavated. This project has been particularly considered in a bilateral agreement between UNRC and the Government of La Pampa Province.