Simultaneous material selection and geometry design of statically determinate trusses using continuous optimization

In this work, we explore simultaneous geometry design and material selection for statically determinate trusses by posing it as a continuous optimization problem. The underlying principles of our approach are structural optimization and Ashby’s procedure for material selection from a database. For simplicity and ease of initial implementation, only static loads are considered in this work with the intent of maximum stiffness, minimum weight/cost, and safety against failure. Safety of tensile and compression members in the truss is treated differently to prevent yield and buckling failures, respectively. Geometry variables such as lengths and orientations of members are taken to be the design variables in an assumed layout. Areas of cross-section of the members are determined to satisfy the failure constraints in each member. Along the lines of Ashby’s material indices, a new design index is derived for trusses. The design index helps in choosing the most suitable material for any geometry of the truss. Using the design index, both the design space and the material database are searched simultaneously using gradient-based optimization algorithms. The important feature of our approach is that the formulated optimization problem is continuous, although the material selection from a database is an inherently discrete problem. A few illustrative examples are included. It is observed that the method is capable of determining the optimal topology in addition to optimal geometry when the assumed layout contains more links than are necessary for optimality.

Characterisation of properties of coniferous wood tracheids by x-ray diffraction, laser scattering and microscopy

In recent years there has been growing interest in selecting suitable wood raw material to increase end product quality and to increase the efficiency of industrial processes. Genetic background and growing conditions are known to affect properties of growing trees, but only a few parameters reflecting wood quality, such as volume and density can be measured on an industrial scale. Therefore research on cellular level structures of trees grown in different conditions is needed to increase understanding of the growth process of trees leading to desired wood properties. In this work the cellular and cell wall structures of wood were studied. Parameters, such as the mean microfibril angle (MFA), the spiral grain angles, the fibre length, the tracheid cell wall thickness and the cross-sectional shape of the tracheid, were determined as a function of distance from the pith towards the bark and mutual dependencies of these parameters were discussed. Samples from fast-grown trees, which belong to a same clone, grown in fertile soil and also from fertilised trees were measured. It was found that in fast-grown trees the mean MFA decreased more gradually from the pith to the bark than in reference stems. In fast-grown samples cells were shorter, more thin-walled and their cross-sections were rounder than in slower-grown reference trees. Increased growth rate was found to cause an increase in spiral grain variation both within and between annual rings. Furthermore, methods for determination of the mean MFA using x-ray diffraction were evaluated. Several experimental arrangements including the synchrotron radiation based microdiffraction were compared. For evaluation of the data analysis procedures a general form for diffraction conditions in terms of angles describing the fibre orientation and the shape of the cell was derived. The effects of these parameters on the obtained microfibril angles were discussed. The use of symmetrical transmission geometry and tangentially cut samples gave the most reliable MFA values.

Interatomic potentials for fusion reactor material simulations

Fusion energy is a clean and safe solution for the intricate question of how to produce non-polluting and sustainable energy for the constantly growing population. The fusion process does not result in any harmful waste or green-house gases, since small amounts of helium is the only bi-product that is produced when using the hydrogen isotopes deuterium and tritium as fuel. Moreover, deuterium is abundant in seawater and tritium can be bred from lithium, a common metal in the Earth's crust, rendering the fuel reservoirs practically bottomless. Due to its enormous mass, the Sun has been able to utilize fusion as its main energy source ever since it was born. But here on Earth, we must find other means to achieve the same. Inertial fusion involving powerful lasers and thermonuclear fusion employing extreme temperatures are examples of successful methods. However, these have yet to produce more energy than they consume. In thermonuclear fusion, the fuel is held inside a tokamak, which is a doughnut-shaped chamber with strong magnets wrapped around it. Once the fuel is heated up, it is controlled with the help of these magnets, since the required temperatures (over 100 million degrees C) will separate the electrons from the nuclei, forming a plasma. Once the fusion reactions occur, excess binding energy is released as energetic neutrons, which are absorbed in water in order to produce steam that runs turbines. Keeping the power losses from the plasma low, thus allowing for a high number of reactions, is a challenge. Another challenge is related to the reactor materials, since the confinement of the plasma particles is not perfect, resulting in particle bombardment of the reactor walls and structures. Material erosion and activation as well as plasma contamination are expected. Adding to this, the high energy neutrons will cause radiation damage in the materials, causing, for instance, swelling and embrittlement. In this thesis, the behaviour of a material situated in a fusion reactor was studied using molecular dynamics simulations. Simulations of processes in the next generation fusion reactor ITER include the reactor materials beryllium, carbon and tungsten as well as the plasma hydrogen isotopes. This means that interaction models, {\it i.e. interatomic potentials}, for this complicated quaternary system are needed. The task of finding such potentials is nonetheless nearly at its end, since models for the beryllium-carbon-hydrogen interactions were constructed in this thesis and as a continuation of that work, a beryllium-tungsten model is under development. These potentials are combinable with the earlier tungsten-carbon-hydrogen ones. The potentials were used to explain the chemical sputtering of beryllium due to deuterium plasma exposure. During experiments, a large fraction of the sputtered beryllium atoms were observed to be released as BeD molecules, and the simulations identified the swift chemical sputtering mechanism, previously not believed to be important in metals, as the underlying mechanism. Radiation damage in the reactor structural materials vanadium, iron and iron chromium, as well as in the wall material tungsten and the mixed alloy tungsten carbide, was also studied in this thesis. Interatomic potentials for vanadium, tungsten and iron were modified to be better suited for simulating collision cascades that are formed during particle irradiation, and the potential features affecting the resulting primary damage were identified. Including the often neglected electronic effects in the simulations was also shown to have an impact on the damage. With proper tuning of the electron-phonon interaction strength, experimentally measured quantities related to ion-beam mixing in iron could be reproduced. The damage in tungsten carbide alloys showed elemental asymmetry, as the major part of the damage consisted of carbon defects. On the other hand, modelling the damage in the iron chromium alloy, essentially representing steel, showed that small additions of chromium do not noticeably affect the primary damage in iron. Since a complete assessment of the response of a material in a future full-scale fusion reactor is not achievable using only experimental techniques, molecular dynamics simulations are of vital help. This thesis has not only provided insight into complicated reactor processes and improved current methods, but also offered tools for further simulations. It is therefore an important step towards making fusion energy more than a future goal.

General Practitioner Antimicrobial Stewardship Programme Study (GAPS): protocol for a cluster randomised controlled trial

Background There is a strong link between antibiotic consumption and the rate of antibiotic resistance. In Australia, the vast majority of antibiotics are prescribed by general practitioners, and the most common indication is for acute respiratory infections. The aim of this study is to assess if implementing a package of integrated, multifaceted interventions reduces antibiotic prescribing for acute respiratory infections in general practice. Methods/design This is a cluster randomised trial comparing two parallel groups of general practitioners in 28 urban general practices in Queensland, Australia: 14 intervention and 14 control practices. The protocol was peer-reviewed by content experts who were nominated by the funding organization. This study evaluates an integrated, multifaceted evidence-based package of interventions implemented over a six month period. The included interventions, which have previously been demonstrated to be effective at reducing antibiotic prescribing for acute respiratory infections, are: delayed prescribing; patient decision aids; communication training; commitment to a practice prescribing policy for antibiotics; patient information leaflet; and near patient testing with C-reactive protein. In addition, two sub-studies are nested in the main study: (1) point prevalence estimation carriage of bacterial upper respiratory pathogens in practice staff and asymptomatic patients; (2) feasibility of direct measures of antibiotic resistance by nose/throat swabbing. The main outcome data are from Australia’s national health insurance scheme, Medicare, which will be accessed after the completion of the intervention phase. They include the number of antibiotic prescriptions and the number of patient visits per general practitioner for periods before and during the intervention. The incidence of antibiotic prescriptions will be modelled using the numbers of patients as the denominator and seasonal and other factors as explanatory variables. Results will compare the change in prescription rates before and during the intervention in the two groups of practices. Semi-structured interviews will be conducted with the general practitioners and practice staff (practice nurse and/or practice manager) from the intervention practices on conclusion of the intervention phase to assess the feasibility and uptake of the interventions. An economic evaluation will be conducted to estimate the costs of implementing the package, and its cost-effectiveness in terms of cost per unit reduction in prescribing. Discussion The results on the effectiveness, cost-effectiveness, acceptability and feasibility of this package of interventions will inform the policy for any national implementation.

The psychometric properties of the Kessler Psychological Distress Scale (K6) in a general population sample of adolescents

The 6-item Kessler Psychological Distress Scale (K6; Kessler et al., 2002) is a screener for psychological distress that has robust psychometric properties among adults. Given that a significant proportion of adolescents experience mental illness, there is a need for measures that accurately and reliably screen for mental disorders in this age group. This study examined the psychometric properties of the K6 in a large general population sample of adolescents (N = 4,434; mean age = 13.5 years; 44.6% male). Factor analyses were conducted to examine the dimensionality of the K6 in adolescents and to investigate sex-based measurement invariance. This study also evaluated the K6 as a predictor of scores on the Strengths and Difficulties Questionnaire (SDQ; Goodman, 1997). The K6 demonstrated high levels of internal consistency, with the 6 items loading primarily on 1 factor. Consistent with previous research, females reported higher mean levels of psychological distress when compared with males. The identification of sex-based measurement noninvariance in the item thresholds indicated that these mean differences most likely represented reporting bias in the K6 items rather than true differences in the underlying psychological distress construct. The K6 was a fair to good predictor of abnormal scores on the SDQ, but predictive utility was relatively low among males. Future research needs to focus on refining and augmenting the K6 scale to maximize its utility in adolescents. (PsycINFO Database Record (c) 2015 APA, all rights reserved)

Multiscale study on hydrogen mobility in metallic fusion divertor material

For achieving efficient fusion energy production, the plasma-facing wall materials of the fusion reactor should ensure long time operation. In the next step fusion device, ITER, the first wall region facing the highest heat and particle load, i.e. the divertor area, will mainly consist of tiles based on tungsten. During the reactor operation, the tungsten material is slowly but inevitably saturated with tritium. Tritium is the relatively short-lived hydrogen isotope used in the fusion reaction. The amount of tritium retained in the wall materials should be minimized and its recycling back to the plasma must be unrestrained, otherwise it cannot be used for fueling the plasma. A very expensive and thus economically not viable solution is to replace the first walls quite often. A better solution is to heat the walls to temperatures where tritium is released. Unfortunately, the exact mechanisms of hydrogen release in tungsten are not known. In this thesis both experimental and computational methods have been used for studying the release and retention of hydrogen in tungsten. The experimental work consists of hydrogen implantations into pure polycrystalline tungsten, the determination of the hydrogen concentrations using ion beam analyses (IBA) and monitoring the out-diffused hydrogen gas with thermodesorption spectrometry (TDS) as the tungsten samples are heated at elevated temperatures. Combining IBA methods with TDS, the retained amount of hydrogen is obtained as well as the temperatures needed for the hydrogen release. With computational methods the hydrogen-defect interactions and implantation-induced irradiation damage can be examined at the atomic level. The method of multiscale modelling combines the results obtained from computational methodologies applicable at different length and time scales. Electron density functional theory calculations were used for determining the energetics of the elementary processes of hydrogen in tungsten, such as diffusivity and trapping to vacancies and surfaces. Results from the energetics of pure tungsten defects were used in the development of an classical bond-order potential for describing the tungsten defects to be used in molecular dynamics simulations. The developed potential was utilized in determination of the defect clustering and annihilation properties. These results were further employed in binary collision and rate theory calculations to determine the evolution of large defect clusters that trap hydrogen in the course of implantation. The computational results for the defect and trapped hydrogen concentrations were successfully compared with the experimental results. With the aforedescribed multiscale analysis the experimental results within this thesis and found in the literature were explained both quantitatively and qualitatively.

Characterisation of head-hardened rail steel in terms of cyclic plasticity response and microstructure for improved material modelling

Stress- and strain-controlled tests of heat treated high-strength rail steel (Australian Standard AS1085.1) have been performed in order to improve the characterisation of the said material׳s ratcheting and fatigue wear behaviour. The hardness of the rail head material has also been studied and it has been found that hardness reduces considerably below four-millimetres from the rail top surface. Historically, researchers have used test coupons with circular cross-sections to conduct cyclic load tests. Such test coupons, typically five-millimetres in gauge diameter and ten‐millimetres in grip diameter, are usually taken from the rail head sample. When there is considerable variation of material properties over the cross-section it becomes likely that localised properties of the rail material will be missed. In another case from the literature, disks 47 mm in diameter for a twin-disk rolling contact test machine were obtained directly from the rail sample and used to validate ratcheting and rolling contact fatigue wear models. The question arises: How accurate are such tests, especially when large material property gradients exist? In this research paper, the effects of rail sampling location on the ratcheting behaviour of AS1085.1 rail steel were investigated using rectangular-shaped specimens obtained at four different depths to observe their respective cyclic plasticity behaviour. The microstructural features of the test coupons were also analysed, especially the pearlite inter-lamellar spacing which showed strong correlation with both hardness and cyclic plasticity behaviour of the material. This work ultimately provides new data and testing methodology to aid the selection of valid parameters for material constitutive models to better understand rail surface ratcheting and wear.

Verkkomedian käyttö ja tutkiminen : Iltalehti Online 1995-2001

Marja Heinonen s dissertation Verkkomedian käyttö ja tutkiminen. Iltalehti Online 1995-2001 describes the usage of new internet based news service Iltalehti Online during its first years of existence, 1995-2001. The study focuses on the content of the service and users attitudes towards the new media and its contents. Heinonen has also analyzed and described the research methods that can be used in the research of any new media phenomenon when there is no historical perspective to do the research. Heinonen has created a process model for the research of net medium, which is based on a multidimensional approach. She has chosen an iterative research method inspired by Sudweeks and Simoff s CEDA-methodology in which qualitative and quantitative methods take turns both creating results and new research questions. The dissertation discusses and describes the possibilities of combining several research methods in the study of online news media. On general level it discusses the methodological possibilities of researching a completely new media form when there is no historical perspective. The result of these discussions is in favour for the multidimensional methods. The empiric research was built around three cases of Iltalehti Online among its users: log analysis 1996-1999, interviews 1999 and clustering 2000-2001. Even though the results of different cases were somewhat conflicting here are the central results from the analysis of Iltalehti Online 1995-2001: - Reading was strongly determined by the gender. - The structure of Iltalehti Online guided the reading strongly. - People did not make a clear distinction in content between news and entertainment. - Users created new habits in their everyday life during the first years of using Iltalehti Online. These habits were categorized as follows: - break between everyday routines - established habit - new practice within the rhythm of the day - In the clustering of the users sports, culture and celebrities were the most distinguishing contents. Users did not move across these borders as much as within them. The dissertation gives contribution to the development of multidimensional research methods in the field of emerging phenomena in media field. It is also a unique description of a phase of development in media history through an unique research material. There is no such information (logs + demographics) available of any other Finnish online news media. Either from the first years or today.

Yrittäjyyden arvottaminen akateemisten nuorten argumentoinnissa

Evaluation of entrepreneurship in the speech of academic students and newly qualified young academics a summary of a qualitative attitude study. In Finland very few university students plan to become entrepreneurs. The aim of this research was to examine entrepreneurial attitudes expressed in speech. The material was gathered from interviews with university students and newly qualified young academic adults. The interviewees commented on twelve different sentences with claims formulated using research literature and views that have appeared in public discussions. The interviewees were divided into three different groups based on their self-expressed entrepreneurial intentions. The method of qualitative attitude research (Vesala & Rantanen 1999, 2007) was used in the interviews. The research material was studied using two interpretative theories: (1) The planned behaviour theory (Ajzen 1985, 1991a, b), which makes it possible to focus on the separate elements (attitude towards an act, subjective norms and perceived feasibility) necessary for intentions to develop; and (2) The theory of the two images of entrepreneurship (Vesala 1996), where individualism and relationism can be seen as resources for evaluating entrepreneurship. The subject of the research was how university students and newly qualified young adults viewed entrepreneurship as a general phenomen and in relation to the academic world. A second focus was on the attitudes expressed toward entrepreneurial university education and the possibility of combining entrepreneurship and academic knowledge. Of interest were also questions such as whether academic studies, knowledge and the university itself are resources or barriers to entrepreneurial intentions and entrepreneurship whether university students received any support for their entrepreneurial ambitions from the university and their fellow academic students. The problems tackled by this research were thus the following: How was entrepreneurship seen, both as a general phenomen and in an academic context, when it was evaluated positively, negatively or neutrally by the interviewees? In what way was entrepreneurship constructed in the interviewees attitudes? How were entrepreneurship and the academic world related in the interviewees attitudes? What kind of role did the university as an academic context play in the interviewees attitudes for example were university education and academic knowledge seen as resources or barriers to their entrepreneurial intentions. Traditional attitude studies claim that attitudes are a stable property of an individual. In contrast, rhetorical social psychological and qualitative attitude studies emphasize the contextual and linguistic aspects of attitude, and they offered an alternative viewpoint for this research. The study was based on two general assumptions: attitudes have objects and are evaluative. Here attitude was defined as an evaluative interpresentation made towards an object; adopting an attitude is a contextual process in the sense that attitudes are always concerned with the action context of the persons presenting them. Entrepreneurship, both as a general phenomen and in an academic context, was specified as the object to which an attitude was taken. From a theoretical point of view, qualitative methods suited the general structure of this research well. In a particular, qualitative approach which emphasized contextual elements proved to be both empirically valid and useful for avoiding the problematic assumptions associated with traditional attitude study. The subject of the analysis was the argumentative speech produced by the interviewees. The results of the study show the subjects responses to three main ways of viewing entrepreneurships. The first was an individualistic, ideal image of entrepreneurship. This was mostly evaluated positively and gained wide approval especially among interviewees who included entrepreneurship among their employment choices. Entrepreneurship was seen as the decision to earn one s living independently. In this individualistic image of entrepreneurship, the social context was hardly ever mentioned. Elements which were seen to threaten this ideal image were evaluated negatively. When entrepreneurship was evaluated negatively using the individualistic image of entrepreneurship, it was mentioned that it forced one into a never ending cycle of work and uninterested duties. The relationistic image of entrepreneurship was used as a speech resource when the social context was constructed as an economic resource or a threat to the ideal image of entrepreneurship. In the second view, entrepreneurship was characteristically seen as being based on economics, which was seen as a threat to the ideal individualistic image of entrepreneurship. The risk of economic failure was seen as a limiting factor to entrepreneurial ambitions as it forced entrepreneurs to work around the clock. The third view concerned the relationship between entrepreneurship and the academic world. Entrepreneurship as an employment choice for university educated persons was evaluated as relevant, and thus positively, when university education was constructed as a resource for entrepreneurship - and irrelevant and thus negatively when it was construed as an obstacle, too wide, or when successful entrepreneurship was seen as being mostly based on an individual s personal characteristics. The interviewees with no entrepreneurial intentions expressed the view that academic education didn t provide the proper skills and knowledge for entrepreneurship. The interviewees also expressed interest in university entrepreneurship education, although none had experience on this. The interviewees emphasized the fact that the University didn t encourage them to consider entrepreneurship as a relevant employment choice. The assumption made by this study was that becoming an entrepreneur is a conscious decision, the environment may influence an individual s decisions on how to make a living as it tends to socialise people to act in accordance with cultural traditions. Keywords: Entrepreneurship, Attitudes towards entrepreneurship, Intentional behaviour, Entrepreneurial intention, University entrepreneurship education, Qualitative attitude research (Vesala & Rantanen 1999, 2007), Rhetorical social psychology (Billig 1986), The theory of entrepreneuship s two images: individualism and relationism (Vesala 1996 ), The planned behaviour theory (Ajzen 1985, 1991a, b)

Just say no? The influence of personal goals, beliefs, psychosocial adjustment, and parental relationships in drug use by adolescents

The study in its entirety focused on factors related to adolescents decisions concerning drug use. The term drug use is taken here to include the use of tobacco products, alcohol, narcotics, and other addictive substances. First, the reasons given for drug use (attributions) were investigated. Secondly, the influence of personal goals, the beliefs involved in decision making, psychosocial adjustment including body image and involvement with peers, and parental relationships on drug use were studied. Two cohorts participated in the study. In 1984, a questionnaire on reasons for drug use was administered to a sample of adolescents aged 14-16 (N=396). A further questionnaire was administered to another sample of adolescents aged 14-16 (N=488) in 1999. The results for both cohorts were analyzed in Articles I and II. In Articles III and IV further analysis was carried out on the second cohort (N=488). The research report presented here provides a synthesis of all four articles, together with material from a further analysis. In a comparison of the two cohorts it was found that the attributions for drug use had changed considerably over the intervening fifteen-year period. In relation to alcohol and narcotics use an increase was found in reasons involving inner subjective experiences, with mention of the good feeling and fun resulting from alcohol and narcotics use. In addition, the goals of alcohol consumption were increasingly perceived as drinking to get drunk, and for its own sake. The attributions for the adolescents own smoking behavior were quite different from the attributions for smoking by others. The attributions were only weakly influenced by the participants gender or by their smoking habits, either in 1984 or 1999. In relation to participants own smoking, the later questionnaire elicited more mention of inner subjective experiences involving "good feeling. In relation to the perceived reasons for other people s smoking, it elicited more responses connected with the notion of "belonging. In the second sample, the results indicated that the levels of body satisfaction among adolescent girls are lower than those among adolescent boys. Overall, dissatisfaction with one's physical appearance seemed to relate to drug use. Girls were also found to engage in more discussions than boys; this applied to (i) discussion with peers (concerning both intimate and general matters), and (ii) discussion with parents (concerning general matters). However, more than a quarter of the boys (out of the entire population) reported only low intimacy with both parents and peers. If both drinking and smoking were considered, it seemed that girls in particular who reported drinking and smoking also reported high intimacy with parents and peers. Boys who reported drinking and smoking reported only medium intimacy with parents and peers. In addition, having an intimate relationship with one's peers was associated with a greater tendency to drink purely in order to get drunk. Overall, the results seemed to suggest that drug use is connected with a close relationship with peers and (surprisingly) with a close relationship with parents. Nevertheless, there were also indications that to some extent peer relationships can also protect adolescents from smoking and alcohol use. The results, which underline the complexity of adolescent drug use, are taken up in the Discussion section. It may be that body image and/or other identity factors play a more prominent role in all drug use than has previously been acknowledged. It does appear that in the course of planning support campaigns for adolescents at risk of drug use, we should focus more closely on individuals and their inner world. More research on this field is clearly needed, and therefore some ideas for future research are also presented.

Trial of the Primary Care Practice Improvement Tool: Building organisational performance in Australian general practice and primary health care

Objective: To nationally trial the Primary Care Practice Improvement Tool (PC-PIT), an organisational performance improvement tool previously co-created with Australian primary care practices to increase their focus on relevant quality improvement (QI) activities. Design: The study was conducted from March to December 2015 with volunteer general practices from a range of Australian primary care settings. We used a mixed-methods approach in two parts. Part 1 involved staff in Australian primary care practices assessing how they perceived their practice met (or did not meet) each of the 13 PC-PIT elements of high-performing practices, using a 1–5 Likert scale. In Part 2, two external raters conducted an independent practice visit to independently and objectively assess the subjective practice assessment from Part 1 against objective indicators for the 13 elements, using the same 1–5 Likert scale. Concordance between the raters was determined by comparing their ratings. In-depth interviews conducted during the independent practice visits explored practice managers’ experiences and perceived support and resource needs to undertake organisational improvement in practice. Results: Data were available for 34 general practices participating in Part 1. For Part 2, independent practice visits and the inter-rater comparison were conducted for a purposeful sample of 19 of the 34 practices. Overall concordance between the two raters for each of the assessed elements was excellent. Three practice types across a continuum of higher- to lower-scoring practices were identified, with each using the PC-PIT in a unique way. During the in-depth interviews, practice managers identified benefits of having additional QI tools that relate to the PC-PIT elements. Conclusions: The PC-PIT is an organisational performance tool that is acceptable, valid and relevant to our range of partners and the end users (general practices). Work is continuing with our partners and end users to embed the PC-PIT in existing organisational improvement programs.

Medicalising Prohibition : Harm reduction in Finnish and International Drug Policy

The increase in drug use and related harms in the late 1990s in Finland has come to be referred to as the second drug wave. In addition to using criminal justice as a basis of drug policy, new kinds of drug regulation were introduced. Some of the new regulation strategies were referred to as "harm reduction". The most widely known practices of harm reduction include needle and syringe exchange programmes for intravenous drug users and medicinal substitution and maintenance treatment programmes for opiate users. The purpose of the study is to examine the change of drug policy in Finland and particularly the political struggle surrounding harm reduction in the context of this change. The aim is, first, to analyse the content of harm reduction policy and the dynamics of its emergence and, second, to assess to what extent harm reduction undermines or threatens traditional drug policy. The concept of harm reduction is typically associated with a drug policy strategy that employs the public health approach and where the principal focus of regulation is on drug-related health harms and risks. On the other hand, harm reduction policy has also been given other interpretations, relating, in particular, to human rights and social equality. In Finland, harm reduction can also be seen to have its roots in criminal policy. The general conclusion of the study is that rather than posing a threat to a prohibitionist drug policy, harm reduction has come to form part of it. The implementation of harm reduction by setting up health counselling centres for drug users with the main focus on needle exchange and by extending substitution treatment has implied the creation of specialised services based on medical expertise and an increasing involvement of the medical profession in addressing drug problems. At the same time the criminal justice control of drug use has been intensified. Accordingly, harm reduction has not entailed a shift to a more liberal drug policy nor has it undermined the traditional policy with its emphasis on total drug prohibition. Instead, harm reduction in combination with a prohibitionist penal policy constitutes a new dual-track drug policy paradigm. The study draws on the constructionist tradition of research on social problems and movements, where the analysis centres on claims made about social problems, claim-makers, ways of making claims and related social mobilisation. The research material mainly consists of administrative documents and interviews with key stakeholders. The doctoral study consists of five original articles and a summary article. The first article gives an overview of the strained process of change of drug policy and policy trends around the turn of the millennium. The second article focuses on the concept of harm reduction and the international organisations and groupings involved in defining it. The third article describes the process that in 1996 97 led to the creation of the first Finnish national drug policy strategy by reconciling mutually contradictory views of addressing the drug problem, at the same as the way was paved for harm reduction measures. The fourth article seeks to explain the relatively rapid diffusion of needle exchange programmes after 1996. The fifth article assesses substitution treatment as a harm reduction measure from the viewpoint of the associations of opioid users and their family members.

Personporträttet som tidningsgenre : En närläsningsstudie med fokus på innehållsliga teman, berättarkonventioner och kön

The thesis The portrait interview as a newspaper genre. A qualitative close reading focussing on topical motifs, conventions of narration, and gender defines the portrait interview as a newspaper genre and analyses how the personalities in the portraits are constructed textually. The main body of material consists of 107 portrait interviews in two morning newspapers, Dagens Nyheter (published in Stockholm, Sweden) and Hufvudstadsbladet (published in Swedish in Helsinki, Finland), during two one-week periods (week 46/1999 and week 38/2002). There is also complementary material of 59 portraits from four magazines. The study is carried out within the research traditions of journalistic genre studies, gender and journalism, and critical text analysis. It is comprised of a qualitative close reading focussing on content (topical motifs or themes), conventions of narration, and gender. The methods used to carry out the study are qualitative close reading and quantitative content analysis. The analysis identifies the stylistic elements that differentiate the portrait genre from other journalistic genres, as well as from the autobiographical genre, and explores what opportunities and limitations these elements present for the inclusion of even more women protagonists in the portrait genre. The portrait interview is an exception from the critical mission of journalism in general, with its position as a genre of politeness. Since a typical characteristic of the portrait interview genre is that it pays tribute to the protagonist, the genre reveals the kind of personalities and lives that are seen as admirable in society. Four levels of portrait interview are defined: the prototype portrait, the pure portrait, the hybrid portrait and the marginal portrait. The prototype is a raw version of a portrait that fulfils the criteria but may be lacking in content and stylistics. The pure portrait does not lack these qualities and resembles an ideal portrait. The hybrid is a borderline case which relates to another genre or is a mixture between the portrait and some other genre, most commonly the news genre. The marginal portrait does not fulfil the criteria, and can therefore be seen as an inadequate portrait. For example, obituaries and caricatures are excluded if the protagonist s voice is never quoted. The analysis resulted in three factors that in part help to explain why the portrait interview genre has somewhat more female protagonists than journalistic news texts do in general. The four main reasons why women are presented somewhat more in the portrait genre than in other journalistic genres are: (i) women are shown as exceptions to the female norm when, for example, taking a typical male job or managing in positions where there are few women; (ii) women are shown as representing female themes ; (iii) use of the double bind as a story-generating factor; and (iv) the intimisation of journalism. The double bind usually builds up the narration on female ambiguity in the contradiction between private and public life, for example family and career, personal desire and work. The intimisation of journalism and the double bind give women protagonists somewhat more publicity also because of the tendency of portrait interviews to create conflicts within the protagonist, as an exception to journalism in general where conflicts are created or seen as existing between, for example, persons, groupings or parties. Women protagonists and their lives create an optimal narration of inner conflicts originating in the double bind as men are usually not seen as suffering from these conflicts. The analysis also resulted in gendered portrait norms: The feminine portrait norm and the masculine portrait norm or more concretely, professional life and family life as expectation and exception. Women are expected to be responsible parents and mediocre professionals, while men are expected to be professionals and in their free time engaging fathers. Key words: journalism, genre, portrait interview, gender, interview, newspaper, women s magazine.

Ydinperheen politiikka

The research topic is the formation of nuclear family understanding and the politicization of nuclear family. Thus, the question is how did family historically become understood particularly as nuclear family and why did it become central in terms of politics and social? The research participates in discussions on the concept and phenomena of family. Central theme of analysis is to ask what is family? Family is seen as historically contingent and the discussions on the concept and phenomena are done via historical analysis. Center of attention is nuclear family, thus, a distinction between the concepts of family and nuclear family is made to be able to focus on historically specific phenomena of nuclear family. Family contrary to the concept of nuclear family -- in general is seen to be able to refer to families in all times and all cultures, as well as all types of families in our times and culture. The nuclear family understanding is examined through two separate themes, that of parent-child relationships and marital relations. Two simultaneous processes give nuclear family relations its current form: on the one hand the marital couple as the basis of family is eroding and losing its capacity to hold the family together; on the other, in Finland at least from 1950s on, the normal development of the child has became to be seen ontologically bound to the (biological) mother and (via her to) the father. In the nucleus of the family is the child: the biological, psychological and social processes of normal development are seen ontologically bound to the nuclear family relations. Thus, marriages can collapse, but nuclear family is unbreakable. What is interesting is the historical timing: as nuclear family relations had just been born, the marriage dived to a crisis. The concept and phenomena of nuclear family is analyzed in the context of social and politics (in Finnish these two collapses in the concept of yhteiskunnallinen , which refers both to a society as natural processes as well as to the state in terms of politics). Family is political and social in two senses. First, it is understood as the natural origin of the social and society. Human, by definition, is understood as a social being and the origin of social, in turn, is seen to be in the family. Family is seen as natural to species. Disturbances in family life lead to un-social behaviour. Second, family is also seen as a political actor of rights and obligations: family is obligated to control the life of its members. The state patronage is seen at the same time inevitable family life is way too precious to leave alone -- and problematic as it seems to disturb the natural processes of the family or to erode the autonomy of it. The rigueur of the nuclear family is in the role it seems to hold in the normal development of the child and the future of the society. The disturbances in the families first affect the child, then the society. In terms of possibility to re-think the family the natural and political collide: the nuclear family seems as natural, unchangeable, un- negotiable. Nuclear family is historically ontologised. The biological, psychological and social facts of family seem to be contrary to the idea of negotiation and politics the natural facts of family problematise the politics of family. The research material consists of administrational documents, memoranda, consultation documents, seminar reports, educational writings, guidebooks and newspaper articles in family politics between 1950s and 1990s.

Sosiaalipalveluja kaikille ja kaiken ikää? : Tutkimus suomalaisten mielipiteistä ja kokemuksista sosiaalipalveluista sekä niiden suhteesta legitimiteettiin

This research analyses opinions on the system of social welfare services from the point of view of clients and the public in general in Finland. The approach is quantitative, drawing on theories of the welfare-state tradition. The data used comes from the comprehensive Welfare and Services in Finland survey compiled by STAKES. While previous research on the welfare state has predominantly focused on surveying public opinion on social protection, this research focuses on social welfare services. The main focus of this research is on publicly funded care provided by municipal social welfare services. In this research, social welfare services include child day care, services for people with disabilities, home-help services, counselling by social workers and social assistance. The research considered in particular whether the clients or the population has different opinions towards social welfare services or social benefits. In addition, the research partly covers areas of informal care provided by family and friends. The research material consisted of the STAKES Welfare and Services in Finland survey. The data was compiled in 2004 and 2006 by Statistics Finland. The research comprises five articles. Additional data have been extracted from social welfare statistics and registers. Multiple approaches were applied in the survey on welfare and services the methods in this research included interviews by phone and mail, and register data. The sample size was 5 810 people in 2004 and 5 798 in 2006. The response rates were 82.7% and 83.7%, respectively. The results indicate that a large majority (90%) of the Finnish population is of the opinion that the public sector should bear the main responsibility for organising social and health services. The system of social welfare services and its personnel have strong public support 73% and 80% respectively. However, new and even negative tones have emerged in the Finnish debate on social welfare services. Women are increasingly critical of the performance of social welfare services and the level of social protection. Furthermore, this study shows that women more often than men wish to see an increase in the amount of privately organised social welfare services. Another group critical of the performance of social welfare services are pensioners. People who had used social welfare services were more critical than those who had not used them. Thus, the severest criticism was received from the groups who use and gain most from public services and benefits. However, the education and income variables identified in earlier studies no longer formed a significant dividing line, although people with higher education tend to foster a more positive view of the performance of social welfare services as well as the level of social protection. Income differences did not bear any significance, that is, belonging to a high or low income group was not a determining factor in the attitude towards social welfare services or social benefits. According to the research, family and friends still form an informal yet significant support network in people's everyday lives, and its importance has not been diminished by services provided by the welfare state. The Finnish public considers child day care the most reliable form of social welfare services. Indeed, child day care has become the most universal sector of our system of social welfare services. Other services that instil confidence included counselling by social workers and services for people with disabilities. On the other hand, social assistance and home-help services received negative feedback. The negative views were based on a number of arguments. One argument contends that the home-help service system, which was originally intended for universal use, is crumbling. The preventive role of home-help services has been reduced. These results mirror the increasingly popular opinion that social welfare services are not produced for all those who need them, but to an increasing extent for a select few of them. Municipalities are struggling with their finances and this, combined with negative publicity, has damaged the public's trust in some municipal social welfare services. A welfare state never achieves a stable condition, but must develop over time, as the world around it changes. Following the 1990's recession, we are now in a position where we can start to develop a system that responds to the needs of the next generation. Study results indicating new areas of dissatisfaction reflect the need to develop and improve the services provided. It is also increasingly essential that social welfare services pay attention to the opinions of clients and the public. Should the gap between opinions and actual activities increase, the legitimacy of the whole system would be questioned. Currently, the vast majority of Finns consider the system of social welfare services adequate, which provides us with the continuity required to maintain and improve client-oriented and reasonably priced social welfare services. Paying attention to the signals given by clients and the general public, and reacting to them accordingly, will also secure the development and legitimacy of the system in the future.