Enforcement in environmental law: an economic analysis of citizen suits

Previous to 1970, state and federal agencies held exclusive enforcement responsibilities over the violation of pollution control standards. However, recognizing that the government had neither the time nor resources to provide full enforcement, Congress created citizen suits. Citizen suits, first amended to the Clean Air Act in 1970, authorize citizens to act as private attorney generals and to sue polluters for violating the terms of their operating permits. Since that time, Congress has included citizen suits in 13 other federal statutes. The citizen suit phenomenon is sufficiently new that little is known about it. However, we do know that citizen suits have increased rapidly since the early 1980's. Between 1982 and 1986 the number of citizen suits jumped from 41 to 266. Obviously, they are becoming a widely used method of enforcing the environmental statutes. This paper will provide a detailed description, analysis and evaluation of citizen suits. It will begin with an introduction and will then move on to provide some historic and descriptive background on such issues as how citizen suit powers are delegated, what limitations are placed on the citizens, what parties are on each side of the suit, what citizens can enforce against, and the types of remedies available. The following section of the paper will provide an economic analysis of citizen suits. It will begin with a discussion of non-profit organizations, especially non-profit environmental organizations, detailing the economic factors which instigate their creation and activities. Three models will be developed to investigate the evolution and effects of citizen suits. The first model will provide an analysis of the demand for citizen suits from the point of view of a potential litigator showing how varying remedies, limitations and reimbursement procedures can effect both the level and types of activities undertaken. The second model shows how firm behavior could be expected to respond to citizen suits. Finally, a third model will look specifically at the issue of efficiency to determine whether the introduction of citizen enforcement leads to greater or lesser economic efficiency in pollution control. The database on which the analysis rests consists of 1205 cases compiled by the author. For the purposes of this project this list of citizen suit cases and their attributes were computerized and used to test a series of hypotheses derived from three original economic models. The database includes information regarding plaintiffs, defendants date notice and/or complaint was filed and statutes involved in the claim. The analysis focuses on six federal environmental statutes (Clean Water Act} Resource Conservation and Recovery Act, Comprehensive Environmental Response Compensation and Liability Act, Clean Air Act, Toxic Substances Control Act, and Safe Drinking Water Act) because the majority of citizen suits have occurred under these statutes.

On a uniform turnpike of the third kind in the Robinson-Solow-Srinivasan model

On using McKenzie’s taxonomy of optimal accumulation in the longrun, we report a “uniform turnpike” theorem of the third kind in a model original to Robinson, Solow and Srinivasan (RSS), and further studied by Stiglitz. Our results are presented in the undiscounted, discrete-time setting emphasized in the recent work of Khan-Mitra, and they rely on the importance of strictly concave felicity functions, or alternatively, on the value of a “marginal rate of transformation”, ξσ, from one period to the next not being unity. Our results, despite their specificity, contribute to the methodology of intertemporal optimization theory, as developed in economics by Ramsey, von Neumann and their followers.

A cooperação internacional na terceira onda de democratização: o hibridismo da Fundação Konrad Adenauer e a experiência brasileira

O final do século passado foi marcado por um movimento global de grande magnitude, protagonizado por aproximadamente 30 países que deixaram o autoritarismo e adotaram a democracia como regime de governo. Tal processo Huntington (1991) denominou de “Terceira Onda de Democratização” e foi caracterizado pela participação de múltiplos atores e motivado por diferentes fatores. O objetivo desse trabalho é analisar a particularidade da atuação dos atores internacionais como uma das causas desse enorme movimento democratizador. Para a realização dessa empreitada, elegeu-se como objeto de estudo a atuação da Fundação Konrad Adenauer e sua experiência de atuação no Brasil como promotora dos valores democráticos durante a ditadura militar até o início da redemocratização. O estudo introduz o conceito de “ator híbrido” para referir-se às Fundações Políticas alemãs. Por este termo, entende-se a natureza tanto social (vinculada a partidos políticos) como estatal (atores da cooperação internacional alemã) de tais Fundações. O hibridismo da Fundação Konrad Adenauer e seu engajamento internacional refletem o contexto geopolítico da Guerra Fria e a história política da Alemanha do pós-guerra, que fez da cooperação internacional, em particular a promoção da democracia, um caminho para sua nova inserção no cenário mundial. Assim, a dissertação percorre as causas internacionais da Terceira Onda e os diferentes modos de difusão dos valores democráticos, com maior destaque para a cooperação internacional. Prepara-se, desse modo, o terreno para analisar a relevância para a Alemanha da cooperação internacional e da atuação mundial das Fundações Políticas. Esse arcabouço teórico fornece os subsídios necessários para compreender e apontar as especificidades da atuação da Fundação Konrad Adenauer, ator internacional da Terceira Onda de Democratização. Tais especificidades são evidenciadas na análise de seu modus operandi no Brasil, uma vez que a experiência brasileira demonstra como seu caráter híbrido foi essencial para contornar os evidentes obstáculos inerentes ao contexto político autoritário e promover idéias e atores em prol da democracia.

Sociabilidade homoerótica masculina no Rio de Janeiro na década de 1960: relatos do jornal O Snob

Este trabalho estuda uma rede de sociabilidade homoerótica na cidade do Rio de Janeiro na década de 1960 através da análise dos relatos contidos no jornal doméstico – produzido por um dos grupos e que circulava entre os participantes da rede – O Snob. A rede era composta por vários grupos de convivência que se vinham formando desde a década de 1950, e a maioria dos participantes elaborava suas identidades pessoais compartilhando com a sociedade maior a crença de que pertenceriam ao “terceiro sexo”, “sofrendo” inversão sexual. Assim se desenvolveu uma forma de sociabilidade peculiar, caracterizada por encontros festivos em domicílios como estratégia de sobrevivência, visto que as expectativas sociossexuais dos grupos eram envoltas em hostilidade da sociedade maior. Desta maneira esse estudo aponta processos de sociabilização empreendidos pela rede, moldados na invisibilidade, configurando-se, ainda que de maneira não articulada (ou involuntária), em experiência de conquistas dos direitos civis e sociais ao promover ações práticas que possibilitavam encontros de seus membros e que podem ser traduzidas como o direito de ir e vir, o direito de livre expressão, ainda que num espaço segregado (ou segredado?), direitos básicos, que, no entanto, não eram garantidos aos participantes da rede. Evidencia, nessa trajetória, os processos de ressignificação identitária que os grupos vivenciaram ao longo do período estudado.

Do private equity and venture capital backed firms have better corporate governance after going public?

Mercados financeiros e finanças corporativas

A Framework supporting collaboration on the distributed design of integrated systems

The work described in this thesis aims to support the distributed design of integrated systems and considers specifically the need for collaborative interaction among designers. Particular emphasis was given to issues which were only marginally considered in previous approaches, such as the abstraction of the distribution of design automation resources over the network, the possibility of both synchronous and asynchronous interaction among designers and the support for extensible design data models. Such issues demand a rather complex software infrastructure, as possible solutions must encompass a wide range of software modules: from user interfaces to middleware to databases. To build such structure, several engineering techniques were employed and some original solutions were devised. The core of the proposed solution is based in the joint application of two homonymic technologies: CAD Frameworks and object-oriented frameworks. The former concept was coined in the late 80's within the electronic design automation community and comprehends a layered software environment which aims to support CAD tool developers, CAD administrators/integrators and designers. The latter, developed during the last decade by the software engineering community, is a software architecture model to build extensible and reusable object-oriented software subsystems. In this work, we proposed to create an object-oriented framework which includes extensible sets of design data primitives and design tool building blocks. Such object-oriented framework is included within a CAD Framework, where it plays important roles on typical CAD Framework services such as design data representation and management, versioning, user interfaces, design management and tool integration. The implemented CAD Framework - named Cave2 - followed the classical layered architecture presented by Barnes, Harrison, Newton and Spickelmier, but the possibilities granted by the use of the object-oriented framework foundations allowed a series of improvements which were not available in previous approaches: - object-oriented frameworks are extensible by design, thus this should be also true regarding the implemented sets of design data primitives and design tool building blocks. This means that both the design representation model and the software modules dealing with it can be upgraded or adapted to a particular design methodology, and that such extensions and adaptations will still inherit the architectural and functional aspects implemented in the object-oriented framework foundation; - the design semantics and the design visualization are both part of the object-oriented framework, but in clearly separated models. This allows for different visualization strategies for a given design data set, which gives collaborating parties the flexibility to choose individual visualization settings; - the control of the consistency between semantics and visualization - a particularly important issue in a design environment with multiple views of a single design - is also included in the foundations of the object-oriented framework. Such mechanism is generic enough to be also used by further extensions of the design data model, as it is based on the inversion of control between view and semantics. The view receives the user input and propagates such event to the semantic model, which evaluates if a state change is possible. If positive, it triggers the change of state of both semantics and view. Our approach took advantage of such inversion of control and included an layer between semantics and view to take into account the possibility of multi-view consistency; - to optimize the consistency control mechanism between views and semantics, we propose an event-based approach that captures each discrete interaction of a designer with his/her respective design views. The information about each interaction is encapsulated inside an event object, which may be propagated to the design semantics - and thus to other possible views - according to the consistency policy which is being used. Furthermore, the use of event pools allows for a late synchronization between view and semantics in case of unavailability of a network connection between them; - the use of proxy objects raised significantly the abstraction of the integration of design automation resources, as either remote or local tools and services are accessed through method calls in a local object. The connection to remote tools and services using a look-up protocol also abstracted completely the network location of such resources, allowing for resource addition and removal during runtime; - the implemented CAD Framework is completely based on Java technology, so it relies on the Java Virtual Machine as the layer which grants the independence between the CAD Framework and the operating system. All such improvements contributed to a higher abstraction on the distribution of design automation resources and also introduced a new paradigm for the remote interaction between designers. The resulting CAD Framework is able to support fine-grained collaboration based on events, so every single design update performed by a designer can be propagated to the rest of the design team regardless of their location in the distributed environment. This can increase the group awareness and allow a richer transfer of experiences among them, improving significantly the collaboration potential when compared to previously proposed file-based or record-based approaches. Three different case studies were conducted to validate the proposed approach, each one focusing one a subset of the contributions of this thesis. The first one uses the proxy-based resource distribution architecture to implement a prototyping platform using reconfigurable hardware modules. The second one extends the foundations of the implemented object-oriented framework to support interface-based design. Such extensions - design representation primitives and tool blocks - are used to implement a design entry tool named IBlaDe, which allows the collaborative creation of functional and structural models of integrated systems. The third case study regards the possibility of integration of multimedia metadata to the design data model. Such possibility is explored in the frame of an online educational and training platform.

Repensando o atendimento inicial nos Juizados Especiais Cíveis do Estado de Rondônia

Esta dissertação tem como objeto de análise o atendimento inicial prestado ao jurisdicionado, seja ele autor ou réu, no âmbito dos Juizados Especiais Cíveis do Estado de Rondônia. Destaca-se o tema em três partes: duas de cunho teórico e outra de predominância prática. Na primeira parte, estuda-se o acesso à justiça e a efetividade processual como premissas que permeiam os juizados. Na seqüência, numa abordagem prática, faz-se um retrato comparativo dos Juizados Especiais Cíveis carioca e rondoniense, explorando as singularidades e identificando as situações-problemas. Neste capítulo, situa-se o objeto principal do trabalho, que consiste na criação do Setor de Atendimento Inicial como fórmula destinada a atender o cidadão nos termos do artigo 9.º da Lei n.º 9.099/95 nas causas de até 20 (vinte) salários mínimos. Na terceira parte, volta-se a um estudo teórico, caracterizando o SAI como política pública obrigatória por parte do Poder Judiciário do Estado de Rondônia e apontando a ação civil pública e o termo de ajustamento de conduta como instrumentos hábeis a impô-lo. O trabalho seguiu um cunho interdisciplinar, analisando questões jurídicas e da Teoria Geral da Administração.

Electoral institutions,cleavage structures,and the number of parties

Theory: A classic question in political science concems ",hat deteImines the number of parties that compete in a given polity. Broadly speaking, there are two approaches to answering this question, one that emphasizes the role of electorallaws in structuring coalitional incentives, another that emphasizes the importance of pre-existing social cleavages. In tbis paper, we view the number of parties as a product of the interaction between these two forces, following Powell (1982) and Ordeshook and Shvetsova (1994). Hypotheses: The effective number of parties in a polity should be a multiplicative rather than an additive function ofthe peImissiveness ofthe electoral system and the heterogeneity ofthe society. Methods: Multiple regression on cross-sectional aggregate electoral statistics. Unlike previous studies, we (1) do not confine attention to developed democracies; (2) explicitly control for the influence of presidential elections, taking account of whether they are concurrent or nonconcurrent, and ofthe effective number ofpresidential candidates; and (3) also control for the presence and operation of upper tiers in legislative elections. Results: The hypothesis is confiImed, both as regards the number of legislative and the number of presidential parties .

Decision rules and information provision : monitoring vs manipulation

We analyze the contractual design problem of a principal who delegates decision-making and information provision. The principal faces two tasks: he has to decide the level of discretion to be granted to the decision-maker and to establish who is in charge of supplying the information. We show that these two choices are intrinsically related. When the decision-maker is granted high discretion, information provision is optimally delegated to the parties directly affected by the decision. Conversely, when the decision-maker enjoys little discretion, it is more desirable to rely on a third impartial agent. The paper helps rationalize some organizational arrangements that are commonly observed in the context of judicial and antitrust decision-making.

A moralidade e a vida pregressa do candidato como condição autônoma de elegibilidade

The objective of this work was about fixing the free will paradigm as negative evaluation of political rights which presents a new classification dde such rights, producing species: a) conditions of eligibility autonomous (free will), b) eligibility requirements heteronomous (will third party) and c) ineligibility (court decisions / administrative). This morality and life history as a condition of eligibility unattended, making a hermeneutic analysis of art. 14, § 9 of the Constitution, considering the justification of the views of the voting Minister Carlos Ayres Brito Appeal in Ordinary No 1069/2006 of the Supreme Electoral Tribunal (where Eurico Miranda). Are fixed concepts of morality and life history from the perspective of the moral act freely and consciously. Has resulted in the identification of the moral virtues of honesty and integrity, which are voluntary acts as a reference to morality and integrity respectively. Justifies the morality and life history as a condition of eligibility unattended. who depend exclusively on the willingness of the candidate. It is noteworthy that the conditions for eligibility as a factual finding does not violate the law and does not allow punitive sanctions or setting a deadline in case of refusal to register the application. Attributed to political parties to take responsibility in their statutes moral criteria for the nomination convention in pre candidates, giving an ethical dimension. Analyzes the law under the Clean Record of morality and life history of the candidate and the possible impact on the electoral context.

Third eyelid gland protrusion in dogs: an experimental model proposal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Canine lacrimal and third eyelid superficial glands macroscopic and morphometric characteristics

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Construção e implementação do Balanced Scorecard em uma organização educacional: o caso do Serviço Nacional de Aprendizagem Comercial do Rio Grande do Norte SENAC RN

The changes that have taken place in the organizational environment in recent decades have led to new performance measurement systems being proposed, given the inadequacy of traditional models. The Balanced Scorecard (BSC) emerged as an instrument to translate financial and non-financial assets into real values for all interested parties in the organization, allowing the introduction of strategies to achieve the desired goals. Research shows that most errors committed with the use of this method are related to the implementation process. Thus, the aim of this dissertation is to analyze the process of building and implementing the BSC in an organization. This empirical exploratory study is based on the classic case study method, which enables the researcher to work with a set of evidence, including direct observation, interviews and document analysis. The results show that the use of BSC in the company investigated posed problems during the process of building and implementing the method. These problems were caused mainly by the lack of involvement on the part of upper management and the team s scant knowledge of Balanced Scorecard. One of the gains obtained from adopting the system was the introduction and/or consolidation of a culture of strategic planning and participative management. The continuous implementation phase was highlighted in the monitoring program, created by the organization in an attempt to reverse existing problems, using the BSC as a third generation strategic management system, which led to significant gains, better use of the system and stronger management practices

RINEX_HO: second- and third-order ionospheric corrections for RINEX observation files

When GNSS receivers capable of collecting dual-frequency data are available, it is possible to eliminate the first-order ionospheric effect in the data processing through the ionosphere-free linear combination. However, the second- and third-order ionospheric effects still remain. The first-, second- and third-order ionospheric effects are directly proportional to the total electron content (TEC), although the second- and third-order effects are influenced, respectively, by the geomagnetic field and the maximum electron density. In recent years, the international scientific community has given more attention to these kinds of effects and some works have shown that for high precision GNSS positioning these effects have to be taken into consideration. We present a software tool called RINEX_HO that was developed to correct GPS observables for second- and third-order ionosphere effects. RINEX_HO requires as input a RINEX observation file, then computes the second- and third-order ionospheric effects, and applies the corrections to the original GPS observables, creating a corrected RINEX file. The mathematical models implemented to compute these effects are presented, as well as the transformations involving the earth's magnetic field. The use of TEC from global ionospheric maps and TEC calculated from raw pseudorange measurements or pseudoranges smoothed by phase is also investigated.