Performance of high power fibre laser cutting of thick-section steel and mediumsection aluminium

Cutting of thick section stainless steel and mild steel, and medium section aluminium using the high power ytterbium fibre laser has been experimentally investigated in this study. Theoretical models of the laser power requirement for cutting of a metal workpiece and the melt removal rate were also developed. The calculated laser power requirement was correlated to the laser power used for the cutting of 10 mm stainless steel workpiece and 15 mm mild steel workpiece using the ytterbium fibre laser and the CO2 laser. Nitrogen assist gas was used for cutting of stainless steel and oxygen was used for mild steel cutting. It was found that the incident laser power required for cutting at a given cutting speed was lower for fibre laser cutting than for CO2 laser cutting indicating a higher absorptivity of the fibre laser beam by the workpiece and higher melting efficiency for the fibre laser beam than for the CO2 laser beam. The difficulty in achieving an efficient melt removal during high speed cutting of the 15 mmmild steel workpiece with oxygen assist gas using the ytterbium fibre laser can be attributed to the high melting efficiency of the ytterbium fibre laser. The calculated melt flow velocity and melt film thickness correlated well with the location of the boundary layer separation point on the 10 mm stainless steel cut edges. An increase in the melt film thickness caused by deceleration of the melt particles in the boundary layer by the viscous shear forces results in the flow separation. The melt flow velocity increases with an increase in assist gas pressure and cut kerf width resulting in a reduction in the melt film thickness and the boundary layer separation point moves closer to the bottom cut edge. The cut edge quality was examined by visual inspection of the cut samples and measurement of the cut kerf width, boundary layer separation point, cut edge squareness (perpendicularity) deviation, and cut edge surface roughness as output quality factors. Different regions of cut edge quality in 10 mm stainless steel and 4 mm aluminium workpieces were defined for different combinations of cutting speed and laserpower.Optimization of processing parameters for a high cut edge quality in 10 mmstainless steel was demonstrated

Computational Evaluation of Print Unevenness According to Human Vision

Print quality and the printability of paper are very important attributes when modern printing applications are considered. In prints containing images, high print quality is a basic requirement. Tone unevenness and non uniform glossiness of printed products are the most disturbing factors influencing overall print quality. These defects are caused by non ideal interactions of paper, ink and printing devices in high speed printing processes. Since print quality is a perceptive characteristic, the measurement of unevenness according to human vision is a significant problem. In this thesis, the mottling phenomenon is studied. Mottling is a printing defect characterized by a spotty, non uniform appearance in solid printed areas. Print mottle is usually the result of uneven ink lay down or non uniform ink absorption across the paper surface, especially visible in mid tone imagery or areas of uniform color, such as solids and continuous tone screen builds. By using existing knowledge on visual perception and known methods to quantify print tone variation, a new method for print unevenness evaluation is introduced. The method is compared to previous results in the field and is supported by psychometric experiments. Pilot studies are made to estimate the effect of optical paper characteristics prior to printing, on the unevenness of the printed area after printing. Instrumental methods for print unevenness evaluation have been compared and the results of the comparison indicate that the proposed method produces better results in terms of visual evaluation correspondence. The method has been successfully implemented as ail industrial application and is proved to be a reliable substitute to visual expertise.

Paineilmakompressoreiden lämmön talteenoton optimointi

Tämän työn on teettänyt Vanhan Ruukin Kiinteistöpalvelu Oy ja työ on toteutettu kandidaatintyönä Lappeenrannan Teknilliselle Yliopistolle. Työn tarkoituksena oli selvittää työn teettäjän puolesta paineilmakompressoreiden lämmön talteenoton toimintaa sekä etsiä mahdollisia parannuskohteita järjestelmän hyötysuhteen nostamiseksi. Työ rajattiin koskemaan lämmön talteenoton yhtä lämmönvaihtopatteria ja siihen liittyvää nestekiertolaitteistoa. Syynä työn tekemiselle oli epäilys lämmön talteenoton huonosta hyötyprosentista. Tässä työssä oli tavoitteena ottaa kantaa myös mahdollisiin rahallisiin säästöihin joita järjestelmän kunnollisella toimintaan saattamisella olisi.

Propriedades mecânicas de peças com dimensões estruturais de Pinus spp: correlação entre resistência à tração e classificação visual

A redução da disponibilidade de espécies de madeiras nativas e seus efeitos na economia, associada ao fortalecimento dos conceitos de preservação ambiental, criou a necessidade de desenvolvimento de alternativas viáveis para utilização racional de espécies de reflorestamento. E uma das opções é a realização de classificação visual das peças. Autores de trabalhos desenvolvidos nessa linha de pesquisa verificaram a adequação das regras de classificação visual do Southern Pine Inspection Bureau (SPIB) dos EUA à madeira de Pinus do Brasil e apresentaram proposta para normalizar o processo de classificação visual dessa madeira. Nessa classificação, os aspectos com maior influência são: presença de nós, desvio de grã em relação ao eixo da peça e densidade de anéis de crescimento. Assim, esta pesquisa apresenta um estudo experimental que consistiu na classificação visual e determinação da resistência à tração de 85 peças de Pinus spp e um estudo teórico, que propôs uma equação para determinar a resistência à tração média de peças estruturais em função da classificação visual. Com este trabalho, foi possível observar a influência dos nós e dos anéis de crescimento sobre a resistência à tração das peças analisadas.

Luminescence-based assay methods in drug discovery

The drug discovery process is facing new challenges in the evaluation process of the lead compounds as the number of new compounds synthesized is increasing. The potentiality of test compounds is most frequently assayed through the binding of the test compound to the target molecule or receptor, or measuring functional secondary effects caused by the test compound in the target model cells, tissues or organism. Modern homogeneous high-throughput-screening (HTS) assays for purified estrogen receptors (ER) utilize various luminescence based detection methods. Fluorescence polarization (FP) is a standard method for ER ligand binding assay. It was used to demonstrate the performance of two-photon excitation of fluorescence (TPFE) vs. the conventional one-photon excitation method. As result, the TPFE method showed improved dynamics and was found to be comparable with the conventional method. It also held potential for efficient miniaturization. Other luminescence based ER assays utilize energy transfer from a long-lifetime luminescent label e.g. lanthanide chelates (Eu, Tb) to a prompt luminescent label, the signal being read in a time-resolved mode. As an alternative to this method, a new single-label (Eu) time-resolved detection method was developed, based on the quenching of the label by a soluble quencher molecule when displaced from the receptor to the solution phase by an unlabeled competing ligand. The new method was paralleled with the standard FP method. It was shown to yield comparable results with the FP method and found to hold a significantly higher signal-tobackground ratio than FP. Cell-based functional assays for determining the extent of cell surface adhesion molecule (CAM) expression combined with microscopy analysis of the target molecules would provide improved information content, compared to an expression level assay alone. In this work, immune response was simulated by exposing endothelial cells to cytokine stimulation and the resulting increase in the level of adhesion molecule expression was analyzed on fixed cells by means of immunocytochemistry utilizing specific long-lifetime luminophore labeled antibodies against chosen adhesion molecules. Results showed that the method was capable of use in amulti-parametric assay for protein expression levels of several CAMs simultaneously, combined with analysis of the cellular localization of the chosen adhesion molecules through time-resolved luminescence microscopy inspection.

Painelaitteiden kunnonvalvonta ja kemikaaliputkistojen rakennuttaminen

Painelaitteet ja kemikaaliputkistot ovat yleisiä varsinkin kemian alan yrityksissä. Omista-jan ja haltijan on tiedettävä niihin liittyvä lainsäädäntö, ja osattava soveltaa niitä käytän-töön. Työssä on selvitetty painelaitteisiin ja kemikaaliputkistoihin liittyvän lainsäädännön olen-naisin sisältö. Nykyisin painelaitteiden määräaikaistarkastuksia voidaan korvata painelait-teen seurannalla ja kunnonvalvontajärjestelmällä. Mitä se käytännössä tarkoittaa, ja onko Suomessa mahdollisuutta kuinka laajasti hyödynnetty? On tärkeää tuntea painelaitteiden ja kemikaaliputkistojen vikaantumismekanismit ja kunnonvalvontamenetelmät, jotta yritys voi luoda omaan toimintaympäristöön soveltuvan kunnonvalvontajärjestelmän tai paine-laitteiden seurannan. On pyrittävä siihen, että ongelmat havaitaan, ennen kuin vaurio syn-tyy. Kunnonvalvontajärjestelmän luomiseen ja ylläpitoon voidaan hyödyntää painelaittei-den riskiperusteiseen kunnossapitoon ja tarkastukseen tarkoitettua menettelyä. Työssä on tarkemmin käyty läpi menettelyn sisältö. Kustannustehokkuus ja tuotantolaitteiden käytettävyys ovat nousseet tärkeiksi osa-alueiksi kilpailukyvyn takaamiseksi. Painelaitteiden tarkastuksista ja muista painelaitteisiin ja ke-mikaaliputkistoihin liittyvistä ennakkohuolloista syntyvät kustannukset ovat merkittäviä. Näihin kohdistuvia kustannussäästöjä voidaan saavuttaa monin keinoin huonontamatta kuitenkaan turvallisuutta. Työssä on selvitetty kohdeyrityksen painelaitteet ja kemikaali-putkistot. Lisäksi on käyty läpi nykyinen tarkastusjaksotus, keskeisimmät viat ja tarkastuk-siin liittyvää kustannushistoriaa. Lopputuloksena on syntynyt esiselvitys ja kemikaaliputkistojen hankkimista helpottavaa tietoa. Esiselvityksen avulla kohdeyritys voi yhdessä kunnossapitoyrityksen kanssa laatia strategian painelaitteiden kunnossapidolle ja tarkastuksille. Merkittäviä kustannussäästöjä on saavutettavissa ehdotetuilla jatkotoimenpiteillä, vaikka päädyttäisiin edelleen painelait-teiden tarkastuksien osalta noudattamaan olemassa olevaa käytäntöä.

Reglering och förvaltning av produktions- och slaktdjurs välbefinnande : en offentligrättslig undersökning

Djur och djurskyddet hör till ett rättsligt regleringsområde som inte varit föremål för omfattande rättsvetenskaplig forskning i vårt land även om intresset för djurs välbefinnande ökat både i samhället och inom EU. Avhandlingen har avfattats som en artikelavhandling och är en offentligrättslig studie om djurskyddslagstiftningen och förvaltningen av djurskyddsärenden i Finland. Tematiken har behandlats både ur djurens och djurens ägares eller innehavares synvinkel med utgångspunkt i djurskyddslagstiftningen och förvaltningen av djurskyddsärenden i Finland. Forskningen är fokuserad huvudsakligen på skyddet av och välbefinnandet hos produktions- och slaktdjur även om bland annat de begrepp som granskas också berör andra djurkategorier. De övergripande frågeställningarna i avhandlingen är två. För det första, vad är det som avses med djurs välbefinnande och skydd i regleringen av djurskyddet och för det andra, hur realiseras dessa i djurskyddsmyndigheternas förvaltningsverksamhet? I forskningen presenteras och diskuteras bland annat en ny begreppskonstruktion: djurs rättsliga välbefinnande. Den empiriska delen i avhandlingen omfattar förvaltningsverksamheten inom området av djurskydd under åren 1996–2006. Sammanlagt 10468 dokument som upprättats av djurskyddsmyndigheten i samband med verkställandet av djurskyddsövervakning ingår i undersökningen. Forskningen utmynnar i en åtgärdsförteckning med förslag till utvecklingen av området för djurskydd.

Rakennustarkastuksen mobiilityökalun suunnittelu ja toteuttaminen

Rakennusteollisuuden prosessit ovat vielä usein paperipohjaisia, mikä aiheuttaa työmaiden luonteesta johtuen tiedon hajaantumista, hidastaa tiedon siirtymistä ja vaikeuttaa tiedon käsittelyä. Työmaiden väliaikaisilla konttoreilla tiedon määrä voi nousta hallitsemattoman suureksi, mikä haittaa ja hidastaa työnjohdon päätöksentekoa. Käyttämällä sähköisiä työkaluja tiedon keräämistä, keskittämistä ja siirtoa voidaan tehostaa. Projektin tavoitteeksi otettiin teollisuuden laadunvalvonnan tarkastusprosessin tehostaminen ajallisesti käyttämällä tarkastustyöhön sähköistä tarkastuspöytäkirjaa. Tätä varten suunniteltiin sähköinen tarkastusjärjestelmä, joka koostuu kolmesta erillisestä osasta: Tarkastajan mukana kulkeva mobiililaite, jolle tallennetaan suoraan tarkastuksen laatutietoa, palvelinkone avustamaan tiedonsiirrossa ja –varastoinnissa sekä työpöytäsovellus työnjohdon tarpeisiin. Järjestelmää testattiin sähköalan asennuksia tekevässä yrityksessä osana yrityksen normaalia tarkastustyötä. Verrattuna paperiseen pöytäkirjaan sähköinen tarkastusjärjestelmä nopeutti prosessia moninkertaisesti. Nopeustesteissä havaittiin kuitenkin, että valittu tiedon synkronointikirjasto oli järjestelmän tarpeisiin liian hidas. Järjestelmä saavutti sille asetetut tavoitteet tehostamalla prosessia ajallisesti, mutta järjestelmässä on vielä osa-alueita, jotka tarvitsevat jatkokehittämistä.

Implante tumoral em sítio de trocarte após colecistectomia laparoscópica

The authors present two cases of unsuspected carcinoma of the gallbladder after laparoscopic cholecystectomy in which trocar site metastasis developed during their follow-up. In the first case, a 68 year-old woman with cholecystolithiasis underwent an uneventful laparoscopic cholecystectomy. Histologic examination revealed adenocarcinoma invading the mucosa and muscular layers of the gallbladder. The patient refused additional treatment. Seven months later, metastasis developed in the umbilical port site, which was excised. In the second case, laparoscopic cholecystectomy was performed for a symptomatic gallstone in a 78 year-old man. The gallbladder inspection showed thickenning of the infundibulum wall. Histological examination revealed adenocarcinoma invading serosa. No additional treatment was performed because of the patient's advanced age. A metastasis was identified in the 5 mm port site nine months after the operation. Two hepatic metastasis were also demonstrated by ultrasonography.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

Thinking Outside the Box: Enhancing Science Teaching by Combining (Instead of Contrasting) Laboratory and Simulation Activities

The focus of the present work was on 10- to 12-year-old elementary school students’ conceptual learning outcomes in science in two specific inquiry-learning environments, laboratory and simulation. The main aim was to examine if it would be more beneficial to combine than contrast simulation and laboratory activities in science teaching. It was argued that the status quo where laboratories and simulations are seen as alternative or competing methods in science teaching is hardly an optimal solution to promote students’ learning and understanding in various science domains. It was hypothesized that it would make more sense and be more productive to combine laboratories and simulations. Several explanations and examples were provided to back up the hypothesis. In order to test whether learning with the combination of laboratory and simulation activities can result in better conceptual understanding in science than learning with laboratory or simulation activities alone, two experiments were conducted in the domain of electricity. In these experiments students constructed and studied electrical circuits in three different learning environments: laboratory (real circuits), simulation (virtual circuits), and simulation-laboratory combination (real and virtual circuits were used simultaneously). In order to measure and compare how these environments affected students’ conceptual understanding of circuits, a subject knowledge assessment questionnaire was administered before and after the experimentation. The results of the experiments were presented in four empirical studies. Three of the studies focused on learning outcomes between the conditions and one on learning processes. Study I analyzed learning outcomes from experiment I. The aim of the study was to investigate if it would be more beneficial to combine simulation and laboratory activities than to use them separately in teaching the concepts of simple electricity. Matched-trios were created based on the pre-test results of 66 elementary school students and divided randomly into a laboratory (real circuits), simulation (virtual circuits) and simulation-laboratory combination (real and virtual circuits simultaneously) conditions. In each condition students had 90 minutes to construct and study various circuits. The results showed that studying electrical circuits in the simulation–laboratory combination environment improved students’ conceptual understanding more than studying circuits in simulation and laboratory environments alone. Although there were no statistical differences between simulation and laboratory environments, the learning effect was more pronounced in the simulation condition where the students made clear progress during the intervention, whereas in the laboratory condition students’ conceptual understanding remained at an elementary level after the intervention. Study II analyzed learning outcomes from experiment II. The aim of the study was to investigate if and how learning outcomes in simulation and simulation-laboratory combination environments are mediated by implicit (only procedural guidance) and explicit (more structure and guidance for the discovery process) instruction in the context of simple DC circuits. Matched-quartets were created based on the pre-test results of 50 elementary school students and divided randomly into a simulation implicit (SI), simulation explicit (SE), combination implicit (CI) and combination explicit (CE) conditions. The results showed that when the students were working with the simulation alone, they were able to gain significantly greater amount of subject knowledge when they received metacognitive support (explicit instruction; SE) for the discovery process than when they received only procedural guidance (implicit instruction: SI). However, this additional scaffolding was not enough to reach the level of the students in the combination environment (CI and CE). A surprising finding in Study II was that instructional support had a different effect in the combination environment than in the simulation environment. In the combination environment explicit instruction (CE) did not seem to elicit much additional gain for students’ understanding of electric circuits compared to implicit instruction (CI). Instead, explicit instruction slowed down the inquiry process substantially in the combination environment. Study III analyzed from video data learning processes of those 50 students that participated in experiment II (cf. Study II above). The focus was on three specific learning processes: cognitive conflicts, self-explanations, and analogical encodings. The aim of the study was to find out possible explanations for the success of the combination condition in Experiments I and II. The video data provided clear evidence about the benefits of studying with the real and virtual circuits simultaneously (the combination conditions). Mostly the representations complemented each other, that is, one representation helped students to interpret and understand the outcomes they received from the other representation. However, there were also instances in which analogical encoding took place, that is, situations in which the slightly discrepant results between the representations ‘forced’ students to focus on those features that could be generalised across the two representations. No statistical differences were found in the amount of experienced cognitive conflicts and self-explanations between simulation and combination conditions, though in self-explanations there was a nascent trend in favour of the combination. There was also a clear tendency suggesting that explicit guidance increased the amount of self-explanations. Overall, the amount of cognitive conflicts and self-explanations was very low. The aim of the Study IV was twofold: the main aim was to provide an aggregated overview of the learning outcomes of experiments I and II; the secondary aim was to explore the relationship between the learning environments and students’ prior domain knowledge (low and high) in the experiments. Aggregated results of experiments I & II showed that on average, 91% of the students in the combination environment scored above the average of the laboratory environment, and 76% of them scored also above the average of the simulation environment. Seventy percent of the students in the simulation environment scored above the average of the laboratory environment. The results further showed that overall students seemed to benefit from combining simulations and laboratories regardless of their level of prior knowledge, that is, students with either low or high prior knowledge who studied circuits in the combination environment outperformed their counterparts who studied in the laboratory or simulation environment alone. The effect seemed to be slightly bigger among the students with low prior knowledge. However, more detailed inspection of the results showed that there were considerable differences between the experiments regarding how students with low and high prior knowledge benefitted from the combination: in Experiment I, especially students with low prior knowledge benefitted from the combination as compared to those students that used only the simulation, whereas in Experiment II, only students with high prior knowledge seemed to benefit from the combination relative to the simulation group. Regarding the differences between simulation and laboratory groups, the benefits of using a simulation seemed to be slightly higher among students with high prior knowledge. The results of the four empirical studies support the hypothesis concerning the benefits of using simulation along with laboratory activities to promote students’ conceptual understanding of electricity. It can be concluded that when teaching students about electricity, the students can gain better understanding when they have an opportunity to use the simulation and the real circuits in parallel than if they have only the real circuits or only a computer simulation available, even when the use of the simulation is supported with the explicit instruction. The outcomes of the empirical studies can be considered as the first unambiguous evidence on the (additional) benefits of combining laboratory and simulation activities in science education as compared to learning with laboratories and simulations alone.

Katsastuksen teknisen laadun mittaaminen ja johtaminen

Suorituskyvyn mittaamisella on monia myönteisiä vaikutuksia koko organisaation toimintaan. Mittaamisen avulla toimintaa voidaan johtaa haluttuun suuntaan. Tutkimuksen tavoitteena oli tutkia, minkälainen suorituskykymittaristo tarvitaan katsastusyrityksen ylimmän johdon käyttöön, jotta katsastuksen teknisen laadun johtaminen mahdollistuisi. Tutkimuksen tarkoituksena oli rakentaa katsastuksen teknisen laadun suorituskykymittaristo ylimmälle johdolle. Katsastuksen tekninen laatu on keskeinen kysymys katsastusyritysten olemassaololle. Tekninen laatu on koko katsastustoiminnan perusta, jonka päälle liiketoiminta voidaan rakentaa. Ilman tätä perustaa ei ole jatkuvuutta liiketoiminnalle. Teknisen laadun mittaaminen ei kuitenkaan ole tällä hetkellä järjestelmällistä, eikä käytettävissä ole ollut tehtävään soveltuvaa mittaristoa. Tutkimuksessa käytettiin A-Katsastus Oy:n vuosien 2008–2011 aikana syntyneitä katsastustilastoja. Tilastollista prosessin valvonta-menetelmää (SPC) soveltamalla määritettiin toimipaikka- ja katsastajakohtaiset valvontarajat hylkäysprosenteille ja vikojen määrille. Valvontarajojen avulla rakennettiin katsastuksen teknisen laadun suorituskykymittaristo toimiala-, yritys-, toimipaikka- ja katsastajatasoille. Mittariston avulla voidaan asettaa tekniselle laadulle tavoitteet, seurata tavoitteiden toteumaa ja käynnistää tarvittaessa korjaavat toimenpiteet.

Building object-oriented software with the D-Bus messaging system

Object-oriented programming is a widely adopted paradigm for desktop software development. This paradigm partitions software into separate entities, objects, which consist of data and related procedures used to modify and inspect it. The paradigm has evolved during the last few decades to emphasize decoupling between object implementations, via means such as explicit interface inheritance and event-based implicit invocation. Inter-process communication (IPC) technologies allow applications to interact with each other. This enables making software distributed across multiple processes, resulting in a modular architecture with benefits in resource sharing, robustness, code reuse and security. The support for object-oriented programming concepts varies between IPC systems. This thesis is focused on the D-Bus system, which has recently gained a lot of users, but is still scantily researched. D-Bus has support for asynchronous remote procedure calls with return values and a content-based publish/subscribe event delivery mechanism. In this thesis, several patterns for method invocation in D-Bus and similar systems are compared. The patterns that simulate synchronous local calls are shown to be dangerous. Later, we present a state-caching proxy construct, which avoids the complexity of properly asynchronous calls for object inspection. The proxy and certain supplementary constructs are presented conceptually as generic object-oriented design patterns. The e ect of these patterns on non-functional qualities of software, such as complexity, performance and power consumption, is reasoned about based on the properties of the D-Bus system. The use of the patterns reduces complexity, but maintains the other qualities at a good level. Finally, we present currently existing means of specifying D-Bus object interfaces for the purposes of code and documentation generation. The interface description language used by the Telepathy modular IM/VoIP framework is found to be an useful extension of the basic D-Bus introspection format.

Intrapartum hypoxia and power spectral analysis of fetal heart rate variability

Reliable detection of intrapartum fetal acidosis is crucial for preventing morbidity. Hypoxia-related changes of fetal heart rate variability (FHRV) are controlled by the autonomic nervous system. Subtle changes in FHRV that cannot be identified by inspection can be detected and quantified by power spectral analysis. Sympathetic activity relates to low-frequency FHRV and parasympathetic activity to both low- and high-frequency FHRV. The aim was to study whether intra partum fetal acidosis can be detected by analyzing spectral powers of FHRV, and whether spectral powers associate with hypoxia-induced changes in the fetal electrocardiogram and with the pH of fetal blood samples taken intrapartum. The FHRV of 817 R-R interval recordings, collected as a part of European multicenter studies, were analyzed. Acidosis was defined as cord pH ≤ 7.05 or scalp pH ≤ 7.20, and metabolic acidosis as cord pH ≤ 7.05 and base deficit ≥ 12 mmol/l. Intrapartum hypoxia increased the spectral powers of FHRV. As fetal acidosis deepened, FHRV decreased: fetuses with significant birth acidosis had, after an initial increase, a drop in spectral powers near delivery, suggesting a breakdown of fetal compensation. Furthermore, a change in excess of 30% of the low-to-high frequency ratio of FHRV was associated with fetal metabolic acidosis. The results suggest that a decrease in the spectral powers of FHRV signals concern for fetal wellbeing. A single measure alone cannot be used to reveal fetal hypoxia since the spectral powers vary widely intra-individually. With technical developments, continuous assessment of intra-individual changes in spectral powers of FHRV might aid in the detection of fetal compromise due to hypoxia.

Polycystic ovary syndrome: implications of metabolic dysfunction

OBJECTIVE: To determine the prevalence of metabolic syndrome (MS) and its clinical interrelations in polycystic ovary syndrome (PCOS).METHODS: This was a cross-sectional, prospective study with 100 patients with diagnosed PCOS based on the consensus of Rotterdam (2003). We investigated the interrelationships of MS, with intrinsic PCOS data. Dermatological profile was analyzed, in addition to acanthosis nigricans (AN) in the presence of hirsutism and acne. The use of HOMA-IR (homeostatic model assessment of insulin resistance) aimed at the correlation with MS in order to establish the metabolic dysfunction with the state of insulin resistance.RESULTS: The mean and standard deviations corresponding figures for age, body mass index and waist circumference were, respectively, 25.72 (± 4.87), 30.63 (± 9.31) and 92.09 (± 18.73). The prevalence of MS was 36% and significantly correlated with BMI, AN, and in 51% of patients the state of insulin resistance (HOMA-IR). Regarding skin profile, only AN significant correlation with MS.CONCLUSION: We propose the routine inspection of metabolic components related to severe PCOS. These parameters configure the cardiovascular risk and such conduct is of undoubted importance to public health.