Análise por cromatografia gasosa de BTEX nas emissões de motor de combustão interna alimentado com diesel e mistura diesel-biodiesel (B10)

This paper describes the procedures for analysing pollutant gases emitted by engines, such as volatile organic compounds (benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene) by using high resolution gas chromatography (HRGC). For IC engine burning, in a broad sense, the use of the B10 mixture reduces drastically the emissions of aromatic compounds. Especially for benzene the reduction of concentrations occurs at the level of about 24.5%. Although a concentration value below 1 µg mL-1 has been obtained, this reduction is extremely significant since benzene is a carcinogenic compound.

Sopimusvalmistajan tarjouslaskentamallin kehittäminen monituoteympäristöön

Työn tavoitteena oli luoda yhtenäinen, tehokas ja helppokäyttöinen tarjouslaskentamalli sopimusvalmistajan käyttöön. Konsernin käytössä oli aiemmin neljä erilaista tarjouslaskentamallia ja niitä oli erittäin vaikea vertailla keskenään, eikä niillä voitu laskea tarjouksia kaikille tehtaille. Työ jakautuu kirjallisuuskatsaukseen ja empiiriseen osaan. Kirjallisuuskatsauksessa käsitellään erilaisia hinnoitteluvaihtoehtoja, kustannuslaskennan roolia ja kustannuslaskentamenetelmiä. Empiirinen osa koostuu tarjouslaskennan nykytilan analysoinnista, uuden tarjouslaskentamallin rakentamisesta sekä kehitetyn tarjouslaskentamallin toimintakuvauksesta. Tarjouslaskentamallin pohjaksi valittiin kustannusperusteinen hinnoittelu, koska sitä oli käytetty aikaisemminkin ja se oli koettu hyväksi. Kustannusperusteisen tarjouslaskentamallin pohjaksi luotiin yhtenäiset työ – ja konetuntihinnat koko konserniin. Konetuntihinnat laskettiin 28 koneelle. Konetuntihintoja analysoitiin ja ryhmiteltiin siten, että päädyttiin 16 konelisän käyttöön. Tarjouslaskentamalli käsittelee vain valmistuksen kustannuksia eikä ota kantaa hallintokustannusten syntyyn. Yhtenäinen tarjouslaskentamalli helpottaa eri myyntimiesten tekemien tarjousten vertailua ja mahdollistaa tuotteiden myynnin useille tehtaille. Tarjouslaskentamalli toteutettiin taulukkolaskentaohjelmalla.

Relationships between adolescents and parents values and parents answering behaviour

In this paper we set out a confirmatory factor analysis model relating the values adolescents and their parents aspire to for the child’s future. We approach a problem when collecting parents’ answers and analysing paired data from parents and their child: the fact that in some families only one parent answers, while in others both meet to answer together. In order to account for differences between one-parent and two-parent responses we follow a multiple group structural equation modelling approach. Some significant differences emerged between the two and one answering parent groups. We observed only weak relationships between parents’ and children’s values

Hipertextos fragmentados: Una propuesta para trabajar la competencia lectoliteraria en la formación inicial de docentes

El canon para la formación literaria y la educación literaria en primaria son algunos de los contenidos principales de la asignatura 'Didáctica de la literatura infantil y juvenil" que se imparte en el grado de Educación Primaria de la Universitat de Barcelona. La propuesta de innovación educativa que presentamos consiste en el diseño e implementación de una secuencia formativa dirigida a estos alumnos para ampliar el intertexto lector mediante la lectura y análisis de un corpus de minificciones hipertextuales (Zavala, 2007; Landow, 2009) relacionadas con la literatura de base folklórica y de autor del canon de educación primaria de primeras lenguas. El corpus elegido pertenece al libro Catàleg de monstres (2012) de Masó, minificciones que apelan a la intertextualidad mediante la combinación de múltiples recursos literarios. Palabras clave: Formación inicial de maestros, competencia lectoliteraria, minificción, literatura infantil y juvenil. ENGLISH SUMMARY Fragmented Hypertexts: a proposal to develop literacy competence in initial teacher training Literary canon for primary children and literature education are some of the main contents of the subject 'Teaching of Children's Literature' taught in the Primary Education degree at the University of Barcelona. The proposed educational innovation we present is the design of a teaching sequence targeted to these students to expand their reader intertextuality by reading and analysing hypertext mini fictions (Zavala, 2007; Landow, 2009) related to basic folk literature from the primary school literary canon. The corpus chosen is from the book Catàleg de monstres (2012), written by Masó, selected mini fictions constantly appealing to intertextuality through the combination of multiple literarcy resources. Key words: Folk literature, teacher training of primary education, hypertext mini fictions, literary competence.

El piano francès dels segles XX i XXI : una breu investigació per al disseny d'un repertori de concert

Aquest projecte pretén estudiar les aportacions de Messiaen, Dutilleux i Boulez en l’escriptura pianística, analitzant-ne la transcendència en el terreny interpretatiu actual. Per tal d’assolir aquest objectiu, es repassa quina ha sigut l’evolució de la tècnica pianística francesa, s’estudia el material i les circumstàncies que originen els respectius catàlegs per a piano i es realitza una comparativa del repertori estudiat en els principals conservatoris superiors de Barcelona, París, Sant Petersburg i Moscou. Aquest anàlisi permet determinar que el conservatori de París potencia les obres de nova creació, mentre que als de Barcelona, Sant Petersburg i Moscou encara s’opta per un estudi convergent al cànon. Com a conseqüència, els autors esmentats es consideren objecte d’estudi essencial a París, mentre que a Barcelona i les urbs russes encara no s’han establert en el pla d’estudis.

Habilitats comunicatives per a l’aprenentatge en l’entorn virtual = Communicative skills for learning in a virtual environment

The virtual learning environments are an option in permanent training with great possibilities for adults who look for studies that are compatible with their jobs and with their family life. So as to participate in determined learning as much in attitudes as knowledge and skills. The article is dedicated to analysing the necessary linguistic habits for moving within an environment of this type and offers didactic proposals that can facilitate the active participation in a virtual course and widen the perspectives of the control of new channels of communication with objectives that are different to learning

Preconcentración y atomización con tubo en la llama para la determinación de Cadmio en agua de mar

A flow injection on-line pre-concentration system coupled to thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) for cadmium determination at sub μg L-1 levels in seawater samples was developed. The on-line system was evaluated by analysing cadmium containing in a synthetic seawater matrix (2.5% m/v NaCl, 0.5% m/v MgCl2 and 0.8% m/v CaCl2). A sample volume of 2 mL allows determining Cd with a detection limits of 30 ng L-1 (3* σblank/slope), pre-concentration factor of 34 and repeatability of 1,8% (calculated as RSD, N=8 and containing 200 ng L-1 of Cd ).

Jäykistetyn laattarakenteen mitoittaminen suurten taipumien teorialla

Tässä diplomityössä tutkitaan epälineaarisen teorian hyödyntämistä laattarakenteiden analysoinnissa ja pyritään muodostamaan yksinkertaisia mitoitusohjeita laattarakenteille. Analysointia varten laattarakenne jaetaan lohkoihin, joille mitoitussäännöt määritetään. Tarkastellaan myös lineaarisen ja epälineaarisen teorian antamien tulosten eroavai-suutta ja suurten taipumien huomioimisen aiheuttamaa hyötyä. Työn lähtökohtana on standardi SFS-EN 1993-1-7, joka antaa yksinkertaistettuja mitoitusohjeita laattarakenteiden mitoitukseen lineaarisella ja epälineaarisella teorialla. Työssä selvitetään mistä nämä mitoitusohjeet ovat peräisin. Lisäksi tarkastellaan laattalohkojen erilaisia liitoksia, jotta voidaan tehdä oletuksia laatan reunaehdoista. Tulokseksi saadaan suuntaa-antavia mitoitusohjeita, joiden soveltaminen onnistuu vain muutamille yksinkertaisille rakenteille. Mitoitusohjeiden perusteella saadaan laskettua laattalohkon jännitykset, taipuma sekä mitoitusohjeiden vaatiman jäykisteen koko. Jotta mitoitusohjeista saataisiin tarkemmat, tulisi mitoitettava rakenne pystyä määrittelemään yksityiskohtaisemmin. Vertailtaessa lineaarista ja epälineaarista laskentaa havaitaan, että huomioimalla suurten taipumien aikaansaamat kalvovoimat, laskevat laattarakenteeseen vaikuttavat taipumat ja jännitykset merkittävästikin.

Luottamuksen ilmeneminen alueellisissa yhteistyöverkostoissa

Appearance of trust in regional, co-operative networks In our times, the value of social networks has been widely acknowledged. One can say that it is important for private persons to get networked, whilst it is even a must for companies and organizations in business life. This doctor's thesis examines three co-operative regional networks. Networks are located in Western Uusimaa (Länsi-Uusimaa) region in southernmost Finland, and they had both public organizations and private companies as participants (later called ‘players’). Initially, all of them were co-financed from public funds, and two of them are still operational while writing this. The main target of these networks has been to act as learning networks. The learning network stands for an ensemble of research and development units and workplaces constituting a common forum for learning. The main focus in this study has been on qualitative and structural characteristics of the networks, and how they are relating with intrinsic trust. In addition to the development of trust, it has been studied, at what level organizational learning within the networks takes place, and lastly, what kind of factors facilitate the development of social capital. The theoretical framework for the study is built on analysing trust and social capital. It is a 'mission impossible' to find single definitions for such major concepts. In this study, from the research questions' point of view it has been more relevant to concentrate on the aspects of networking and the relationships between the participating organizations. The total view in this study is very network-centric, and therefore those theories which have similar point of view have been prioritized. Such is the theory about structural holes by Ronald S. Burt (1992). It has been widely applied; especially his views on constraints affecting players in networks. The purpose of this study has not been to create new theories or to analyse and compare thoroughly the existing theoretical trends. Instead, the existing theories have provided the study with conceptual tools, which have been utilized for supporting the empirical results. The aim has been to create an explanatory case study consisting relevant discussion on the relationship between the network characteristics and the appearance of trust. The conceptual categorization for confidence vs. trust created by Niklas Luhmann (1979) is another important theoretical building block. In most cases, co-operation in networks is initiated by people already trusting in each other and willing to work together. However, personal trust is not sufficient in the long run to sustain the co-operation within the network: more abstract systemic trust described by Luhmann must also emerge. In the networks with different structures and at different development phases, these forms of trust appear at different levels. In this study, Luhmann’s systemic trust as a term has been replaced by the concept of 'trust in network as a system'. Structural characteristics of a network (density, centrality, structural holes etc.) have been selected to explain the creation of social capital and trust. The ability to adapt new information is essential for the development of social capital. Qualitative analysis for development phase has been used, and the Learning Network Maturity Test by Leenamaija Otala (2000) and her work have been applied. Thus, the qualitative characteristics and the structural characteristics of the networks are utilized together, when the creation of social capital and appearance of trust are assessed. Social Network Analysis, questionnaires and interviews have been the research methods. Quantitative and qualitative data have been combined. There is a similarity in viewpoints to research data with Extensive Case Study method, in which different cases are searched by exploring various cases and comparing certain common features between them and generic models. Development of trust, social capital and organizational learning has been explained in the study by comparing the networks in hand. Being a case study, it doesn't have targets to provide with general results and findings like conventional surveys. However, in this work phenomena and mechanisms related to them are interpreted from the empirical data. Key finding of this study is that the networks with high structural equality and clear target setting enable building trust to the network as a system. When systemic trust is present, e.g. changes in personnel involved in the co-operation won't hinder the network from remaining operational. On the other hand, if the players are not well motivated to co-operate, if the network is extremely centralized structurally, or if the network has players holding very much more beneficial position compared to the others, systemic trust won't develop: trust tends to remain at the personal level, and is directed to some players only. Such networks won't generate results and benefits to its players, and most probably they won’t live very long. In other words, learning networks cannot solely be based on willingness to learn, but also on willingness to co-operate.

Kokeellisen moodianalyysin hyödyntäminen sääriluun lujuuden määrittämisessä

Diplomityö tehtiin Lappeenrannan teknillisen yliopiston konetekniikan laitokselle. Diplomityö on osa teknillisen yliopiston biomekaanista tutkimusta, jonka tarkoituksena on mallintaa ihmisen tuki- ja liikuntaelimistön toimintaa. Työssä pyrittiin selvittämään, voitaisiinko sääriluuhun kohdistetun mekaanisen herätteen aiheuttamaa värähtelyvastetta analysoimalla saada tietoa luun ominaistaajuuksista ja lujuudesta. Tietoa voitaisiin käyttää esimerkiksi ostoporoosiriskin arvioinnissa sekä ihmiskehon osien toimintaa kuvaavien simulointimallien verifioinnissa. Mittauslaitteistona käytettiin Brüel & Kjær-moodianalyysilaitteistoa. Laitteistokokonaisuuteen kuuluivat herätevasara, elektromagneettinen täristin, voima-anturi, kaksi kiihtyvyysmitta-anturia sekä PulseLab 2.0 –ohjelmistolla varustettu PC-laitteisto. Tulosten jatkoanalyysi suoritettiin MathWorks yhtiön MatLab v 4.0 -ohjelmistolla. Työssä esitellyn mittaustavan ja -laitteiston todettiin soveltuvan sääriluun värähtelyvasteen mittaamiseen. Mittaustulokset eri mittauskertojen välillä samalla henkilöllä ovat yhtenevät. Tutkimuksen tulosten perusteella ei voida osoittaa luun värähtelyvasteen ja lujuuden välistä suoraa korrelaatiota.

Innovatiivisuus ja yhteistoiminnallinen oppiminen liike-elämässä ja opetuksessa

Innovativity and cooperative learning in business life and teaching The study comprises four articles and a summary, which analyse the concepts of innovation and innovativity and the cooperative learning connected to the innovation processes of companies. Th e study comments on what is innovativity. Another point of inspection is how the cooperative learning theory constructed on the basis of educational science lends it self to inspecting business innovations. At the end, we ponder upon how the concepts of innovativity can be used to inspect teachers’ activities. The studied business innovations were chosen on after considering expert statements. The key personnel in the innovation process were interviewed. The concept of innovation is inspected especially with the aid of concept analysis. The pedagogical innovativity study based on the view of education specialists in quantitative and the data was collected with a questionnaire created on the basis of previous research and literature. Different research methods were used in the studies, thus mixed methods were used for the whole of the doctoral thesis. The starting point for the whole, grounded theory, has to be understood here as a research strategy as well as a research method and data analysis method. The results show that innovativity is creativity that demands versatile learning and has positive eff ects on the process or event in practice. The results also show that in successful innovation businesses cooperative learning is something that has been found instead of searched. Cooperative learning can be seen as characteristic for innovation businesses. The five stage division of cooperative learning creates a useful method of analysing learning in innovation businesses. Innovativity connected to cooperative learning seems to make the creation of innovations possible. In addition to this, the results also show that a teacher’s innovativity is connected to reforms and an attitude that embraces them. Versatile learning in the individual and community is a prerequisite for innovativity. It is important that the teacher has a continuous will to renew teaching methods and combine work and teaching methods. The basic requirements are pedagogical vocational profi ciency and resourcefulness in everyday work.

Developing the service offering of an industrial company

The purpose of this thesis was to determine, what kind of service offering the case company should provide to its customers in the Australian market. For this, a model for analysing the competitive environment was developed. In the model, three players were considered: customers, competitors and the case company. Benchmarking was used in identifying competitors’ offerings currently available in the market. Experts inside the case company were consulted for determining the customer need. The competitors’ offerings were analysed on the basis of Pekkarinen et al.’s (2009) framework, dividing the offerings to services supporting the supplier’s product (SSP), supporting the client (SSC), supporting the client’s network (SSN), supporting mutual actions (SSM) and benefit and risk sharing elements. After this, they were compared to the competitive environment in order to identify areas where the case company can differentiate itself from its competitors in the Australian market. On the basis of the company’s key success factors, and the Finnish service concept currently in use, some additional offerings were suggested for the case company in order to further outperform its competitors in the market. Finally, on the basis of the suggested offerings and competitors’ offerings, a service concept was suggested for the case company to introduce in the Australian market.

On the development of object functions and restrictions for shapes made with a turret punch press

This study presents the information required to describe the machine and device resources in the turret punch press environment which are needed for the development of the analysing method for automated production. The description of product and device resources and their interconnectedness is the starting point for method comparison the development of expenses, production planning and the performance of optimisation. The manufacturing method cannot be optimized unless the variables and their interdependence are known. Sheet metal parts in particular may then become remarkably complex, and their automatic manufacture may be difficult or, with some automatic equipment, even impossible if not know manufacturing properties. This thesis consists of three main elements, which constitute the triangulation. In the first phase of triangulation, the manufacture occuring on a turret punch press is examined in order to find the factors that affect the efficiency of production. In the second phase of triangulation, the manufacturability of products on turret punch presses is examined through a set of laboratory tests. The third phase oftriangulation involves an examination of five industry parts. The main key findings of this study are: all possible efficiency in high automation level machining cannot be achieved unless the raw materials used in production and the dependencies of the machine and tools are well known. Machine-specific manufacturability factors for turret punch presses were not taken into account in the industrial case samples. On the grounds of the performed tests and industrial case samples, the designer of a sheet metal product can directly influence the machining time, material loss, energy consumption and the number of tools required on a turret punch press by making decisions in the way presented in the hypothesis of thisstudy. The sheet metal parts to be produced can be optimised to bemanufactured on a turret punch press when the material to be used and the kinds of machine and tool options available are known. This provides in-depth knowledge of the machine and tool properties machine and tool-specifically. None of the optimisation starting points described here is a separate entity; instead, they are all connected to each other.

Elemental analysis of wood materials by external millibeam thick target PIXE

PIXE (Particle Induce X-ray Emission spectrometry) was used for analysing stem bark and stem wood of Scots pine, Norway spruce and Silver birch. Thick samples were irradiated, in laboratory atmosphere, with 3 MeV protons and the beam current was measured indirectly using a photo multiplicator (PM) tube. Both point scans and bulk analyses were performed with the 1 mm diameter proton beam. In bulk analyses, whole bark and sectors of discs of the stem wood were dry ashed at 550 ˚C. The ashes were homogenised by shaking and prepared to target pellets for PIXE analyses. This procedure generated representative samples to be analysed, but the enrichment also enabled quantification of some additional trace elements. The ash contents obtained as a product of the sample preparation procedure also showed to be of great importance in the evaluation of results in environmental studies. Spot scans from the pith of pine wood outwards, showed clearly highest concentrations of manganese, calcium and zinc in the first spot irradiated, or 2-3 times higher than in the surrounding wood. For stem wood from the crown part of a pine this higher concentration level was found in the first four spots/mms, including the pith and the two following growth rings. Zinc showed increasing concentrations outwards in sapwood of the pine stem, with the over-all lowest concentrations in the inner half of the sapwood. This could indicate emigration of this element from sapwood being under transformation to heartwood. Point scans across sapwood of pine and spruce showed more distinct variations in concentrations relative to hearth wood. Higher concentrations of e.g. zinc, calcium and manganese were found in earlywood than in denser latewood. Very high concentrations of iron and copper were also seen for some earlywood increments. The ash content of stem bark is up to and order higher than for the stem wood. However, when the elemental concentration in ashes of bark and wood of the same disc were compared, these are very similar – this when trees are growing at spots with no anthropogenic contamination from the atmosphere. The largest difference was obtained for calcium which appeared at two times high concentrations in ashes of bark than in ashes of the wood (ratio of 2). Pine bark is often used in monitoring of atmospheric pollution, where concentrations in bark samples are compared. Here an alternative approach is suggested: Bark and the underlying stem wood of a pine trees are dry ashed and analysed. The elemental concentration in the bark ash is then compared to the concentration of the same element in the wood ash. Comparing bark to wood includes a normalisation for the varying availability of an element from the soil at different sites. When this comparison is done for the ashes of the materials, a normalisation is also obtained for the general and locally different enrichment of inorganic elements from wood to bark. Already a ratio >2 between the concentration in the bark ash and the concentration in the wood ash could indicate atmospheric pollution. For monitoring where bark is used, this way of “inwards” comparison is suggested - instead of comparing to results from analyses of bark from other trees (read reference areas), growing at sites with different soil and, locally, different climate conditions. This approach also enables evaluation of atmospheric pollution from sampling of only relative few individual trees –preferable during forest felling.

Curriculum innovation in teacher education : exploring conceptions among Tanzanian teacher educators

The focus of the study is to understand curriculum innovation from the perspective of Tanzanian teacher educators. It is argued that the deterioration of quality of education in schools is partly to be attributed to the way in which teachers are educated. Curriculum innovation is considered as an essential strategy for bringing about improvement in teacher education. Therefore, in 2000 a new curriculum was introduced; however, right from the inception the curriculum was criticised by teacher educators. The overall aim of the study is to investigate teacher educators’ conceptions of curriculum innovation. In the theoretical framework the main focus is on discussion about different curriculum approaches for teacher education and innovation. In order to achieve the aim of the study, a phenomenographic approach is employed. This approach is used in order to identify similarities and variation in educators’ conceptions of curriculum innovation. The empirical basis of the study consists of interviews with thirty teacher educators working in eight teachers’ colleges situated in various parts of Tanzania. The findings, in brief, reveal variation in teacher educators’ conceptions of the dominant domains of innovation. Two broad conceptions of teaching with six aspects are identified. Conceptions of educational studies are presented in four broad categories of description with four aspects. Similarly, in methodology subjects two conceptions are described with four aspects. On the integration of subject matter studies and subject methods, two broad conceptions are presented with six aspects. Conceptions of textbook prescription policy are characterised in two broad categories of description with four aspects. With the use of modules two broad conceptions are identified with six aspects. In addition, the study identifies four broad conceptions of future curriculum approaches with eight aspects. Looking across the categories of description, the results indicate that educators cope with innovation individually. Three character types of teacher educators are presented: loyal, creative and critical. Furthermore, four types of phenomena suggesting critical areas about teacher educators’ conceptions of innovation are described: educators’ prior educational background, technical factors, student teachers’ factors and shifting from teaching to learning. On the whole, educators express a number of frame factors in the process of change towards the aim of curriculum innovation. This indicates that the new curriculum (2000) is not implemented as intended by curriculum developers. Constraints to the implementation are presented and discussed in detail. From these findings, two models of educators’ stance towards curriculum innovation are presented and can be used as a framework for planning successful curriculum innovations and analysing practice in teachers’ colleges.