Sanitary quality of broiler litter reused

ABSTRACT Considering the importance of the substrate to bedding in the poultry industry in Brazil, and the enormous pressure on environmental management as to the correct use and management of the waste generated by the production sector, this study aimed to analyze the effect of reuses of two types of litter on sanitary qualities and productive performance of broilers. The study was conducted with litter from 32 different broiler houses, two types of substrates and four cycles of reuses. The litter sanitary quality was verified by the identification of the presence of Escherichia coli and Salmonellaspp. and the incidence of footpad dermatitis. It was observed that the coffee hulls litter presented a reduction of 28.61 percentage points in the probability of occurrence of Salmonella spp when compared to the wood shavings litter, nevertheless, no statistical difference was observed on bacterial occurrence with Salmonella spp. for litter of different types or numbers of reutilization. The presence of Escherichia coli was detected in litter of all cycles, for both types of substrate. The occurrence of footpad lesions was detected for both types of litter, and was influenced by the number of reutilization cycles of the litter. The degree of incidence was detected only for the litter with coffee hull in which there was an increase of 30% between the first and second reuse from which tended to stabilize.

Fuzzy modeling of broiler performance, raised from 1 to 21 days, subject to heat stress

ABSTRACT Given the need to obtain systems to better control broiler production environment, we performed an experiment with broilers from 1 to 21 days, which were submitted to different intensities and air temperature durations in conditioned wind tunnels and the results were used for validation of afuzzy model. The model was developed using as input variables: duration of heat stress (days), dry bulb air temperature (°C) and as output variable: feed intake (g) weight gain (g) and feed conversion (g.g-1). The inference method used was Mamdani, 20 rules have been prepared and the defuzzification technique used was the Center of Gravity. A satisfactory efficiency in determining productive responses is evidenced in the results obtained in the model simulation, when compared with the experimental data, where R2 values ​​calculated for feed intake, weight gain and feed conversion were 0.998, 0.981 and 0.980, respectively.

Carbon footprint of the colombian cocoa production

ABSTRACT Cocoa is an important commercial crop in the tropics; and estimating the carbon emissions in the producing-areas is a worthwhile effort. The main goal of the current paper was to evaluate the carbon footprint (CF) per kilogram of Colombian cocoa bean produced under conventional and agroforestry managements, following the methods proposed by PAS 2050. In this research, we compared our results to other worldwide researches, showing an overview of the current limitations and challenges involving the CF researches. Our results showed that all calculated environmental burdens were lower for the conventional management. In the agroforestry practice, composting of cocoa pod husks contributed with approximately 34.00E+00 g methane and 2.55E+00 g nitrous oxide emissions per kilogram of cocoa grain produced. Therefore, such practice could reduce CF by 6.00E+00 kg CO2 Eq kg-1, which is certainly a significant amount. These cocoa residues left on the ground have a strong impact on CF of both studied managements due to the anaerobic decomposition of organic matter, which represents more than 85% of emissions. We concluded that both evaluated production processes can emit environmental burdens at the same magnitude. Definitely, there is a widespread need to improve cocoa production system by changing old and less productive plants to the so called clones to ensure cocoa yield and quality worldwide.

Histoplasmose como causa de perfuração intestinal em paciente com síndrome da imunodeficiência adquirida

Thirty-four years old patient, female, husband died of AIDS (Acquired Immunodeficiency Síndrome). She's confined to Hospital Universitário João de Barros Barreto, with a positive tesT for AIDS, fever, 10 kg/month of weight loss, diarrhea with gummy faeces, productive cough, yellowish sputum. The therapy was initiated, symptomatic, associated to Epivir, Saquinavir and AZT. The searching exams for Alcohol Ácid Resistant Bacili and fungi in the sputum were negative. At the hemogram was shown a pancytopenia, the esophagogastroduodenunscopy showed light esophago moniliasis. During commitment presented a perforating acute abdomen chart, the abdominal radiography showed hidroair levels, pneumoperitoneum, enlarced bowels with swollen wall. She was undertaken a surgery with diagnosis hypothesis of cytomegalovirus perforation, which accordin to literature is the most frequent cause of intestinal perforation in patients with AIDS.

Thinking Outside the Box: Enhancing Science Teaching by Combining (Instead of Contrasting) Laboratory and Simulation Activities

The focus of the present work was on 10- to 12-year-old elementary school students’ conceptual learning outcomes in science in two specific inquiry-learning environments, laboratory and simulation. The main aim was to examine if it would be more beneficial to combine than contrast simulation and laboratory activities in science teaching. It was argued that the status quo where laboratories and simulations are seen as alternative or competing methods in science teaching is hardly an optimal solution to promote students’ learning and understanding in various science domains. It was hypothesized that it would make more sense and be more productive to combine laboratories and simulations. Several explanations and examples were provided to back up the hypothesis. In order to test whether learning with the combination of laboratory and simulation activities can result in better conceptual understanding in science than learning with laboratory or simulation activities alone, two experiments were conducted in the domain of electricity. In these experiments students constructed and studied electrical circuits in three different learning environments: laboratory (real circuits), simulation (virtual circuits), and simulation-laboratory combination (real and virtual circuits were used simultaneously). In order to measure and compare how these environments affected students’ conceptual understanding of circuits, a subject knowledge assessment questionnaire was administered before and after the experimentation. The results of the experiments were presented in four empirical studies. Three of the studies focused on learning outcomes between the conditions and one on learning processes. Study I analyzed learning outcomes from experiment I. The aim of the study was to investigate if it would be more beneficial to combine simulation and laboratory activities than to use them separately in teaching the concepts of simple electricity. Matched-trios were created based on the pre-test results of 66 elementary school students and divided randomly into a laboratory (real circuits), simulation (virtual circuits) and simulation-laboratory combination (real and virtual circuits simultaneously) conditions. In each condition students had 90 minutes to construct and study various circuits. The results showed that studying electrical circuits in the simulation–laboratory combination environment improved students’ conceptual understanding more than studying circuits in simulation and laboratory environments alone. Although there were no statistical differences between simulation and laboratory environments, the learning effect was more pronounced in the simulation condition where the students made clear progress during the intervention, whereas in the laboratory condition students’ conceptual understanding remained at an elementary level after the intervention. Study II analyzed learning outcomes from experiment II. The aim of the study was to investigate if and how learning outcomes in simulation and simulation-laboratory combination environments are mediated by implicit (only procedural guidance) and explicit (more structure and guidance for the discovery process) instruction in the context of simple DC circuits. Matched-quartets were created based on the pre-test results of 50 elementary school students and divided randomly into a simulation implicit (SI), simulation explicit (SE), combination implicit (CI) and combination explicit (CE) conditions. The results showed that when the students were working with the simulation alone, they were able to gain significantly greater amount of subject knowledge when they received metacognitive support (explicit instruction; SE) for the discovery process than when they received only procedural guidance (implicit instruction: SI). However, this additional scaffolding was not enough to reach the level of the students in the combination environment (CI and CE). A surprising finding in Study II was that instructional support had a different effect in the combination environment than in the simulation environment. In the combination environment explicit instruction (CE) did not seem to elicit much additional gain for students’ understanding of electric circuits compared to implicit instruction (CI). Instead, explicit instruction slowed down the inquiry process substantially in the combination environment. Study III analyzed from video data learning processes of those 50 students that participated in experiment II (cf. Study II above). The focus was on three specific learning processes: cognitive conflicts, self-explanations, and analogical encodings. The aim of the study was to find out possible explanations for the success of the combination condition in Experiments I and II. The video data provided clear evidence about the benefits of studying with the real and virtual circuits simultaneously (the combination conditions). Mostly the representations complemented each other, that is, one representation helped students to interpret and understand the outcomes they received from the other representation. However, there were also instances in which analogical encoding took place, that is, situations in which the slightly discrepant results between the representations ‘forced’ students to focus on those features that could be generalised across the two representations. No statistical differences were found in the amount of experienced cognitive conflicts and self-explanations between simulation and combination conditions, though in self-explanations there was a nascent trend in favour of the combination. There was also a clear tendency suggesting that explicit guidance increased the amount of self-explanations. Overall, the amount of cognitive conflicts and self-explanations was very low. The aim of the Study IV was twofold: the main aim was to provide an aggregated overview of the learning outcomes of experiments I and II; the secondary aim was to explore the relationship between the learning environments and students’ prior domain knowledge (low and high) in the experiments. Aggregated results of experiments I & II showed that on average, 91% of the students in the combination environment scored above the average of the laboratory environment, and 76% of them scored also above the average of the simulation environment. Seventy percent of the students in the simulation environment scored above the average of the laboratory environment. The results further showed that overall students seemed to benefit from combining simulations and laboratories regardless of their level of prior knowledge, that is, students with either low or high prior knowledge who studied circuits in the combination environment outperformed their counterparts who studied in the laboratory or simulation environment alone. The effect seemed to be slightly bigger among the students with low prior knowledge. However, more detailed inspection of the results showed that there were considerable differences between the experiments regarding how students with low and high prior knowledge benefitted from the combination: in Experiment I, especially students with low prior knowledge benefitted from the combination as compared to those students that used only the simulation, whereas in Experiment II, only students with high prior knowledge seemed to benefit from the combination relative to the simulation group. Regarding the differences between simulation and laboratory groups, the benefits of using a simulation seemed to be slightly higher among students with high prior knowledge. The results of the four empirical studies support the hypothesis concerning the benefits of using simulation along with laboratory activities to promote students’ conceptual understanding of electricity. It can be concluded that when teaching students about electricity, the students can gain better understanding when they have an opportunity to use the simulation and the real circuits in parallel than if they have only the real circuits or only a computer simulation available, even when the use of the simulation is supported with the explicit instruction. The outcomes of the empirical studies can be considered as the first unambiguous evidence on the (additional) benefits of combining laboratory and simulation activities in science education as compared to learning with laboratories and simulations alone.

Feasibility study of metal to polymer hybrid joining

The increasing demand for lightweight components has led to a huge exploitation of non-metallic materials such as polymers, fibers and elastomers in industrial and manufacturing processes. Recent trends towards cost effectiveness, weight reduction and production flexibility in industrial production and manufacturing processes has led to a growing interest in hybrid components where two or more dissimilar materials coexist to achieving specifically optimized characteristics. The importance of this research is to serve as a bridge to understanding the theories behind various joining techniques and the adaptation of the process for metal to polymer hybrid joints. Moreso, it helps companies to select the most productive and yet economical joining process for realization of lightweight metal to polymer hybrid components. This thesis is a literature review analyzing various materials that has been published on various joining methods for metal to polymer hybrid joints on the feasibility and eventual realization of the joint between these dissimilar materials. This study is aimed at theoretically evaluating the feasibility of joining processes between metal and plastic components by exploiting exhaustively joining and welding sources.

Laatu ja tuottavuus hitsaavassa verkostossa

Diplomityössä tarkastellaan laadun ja tuottavuuden parantamisen keinoja hitsaavassa verkostossa MIG/MAG-hitsauksen osalta. Työn taustalla vaikuttaa Total Welding Management -menetelmä, mikä on hitsaustoimintojen kokonaisvaltaiseen johtamiseen ja hallintaan kehitetty toimintamalli. Työn teoriaosassa käsitellään laatuajattelua ja yritysyhteistyötä hitsaavan teollisuuden yrityskentässä sekä hitsauskustannuksiin vaikuttavia tekijöitä. Tutkimusosuus sisältää yritysverkoston nykytilan tarkastelun sekä kehitystoimenpiteitä kohti verkoston yhteistä toimintamallia saavuttaa tehokas ja kannattava yhteistyö. Hitsaustyön kustannukset määritetään suurelta osin suunnittelussa. Laatuun voidaan vaikuttaa merkittävästi hitsaustyötä edeltävissä toiminnoissa sekä hitsaajan työn tukemisella. Kokonaisvaltaisen hyödyn saavuttaminen hitsaustyön tuottavuuden parantamisessa vaatii kaikkien toimintojen tarkastelua sen sijaan, että tehostetaan vain hitsaamon toimintaa. Itse hitsaus voi olla vain pieni osa hitsaustoimintojen kokonaishallintaa. Toimintamallin luominen laadunvarmistukseen, suunnittelun ja valmistuksen yhteistyöhön sekä hitsaustoimintojen hallintaan mahdollistaa hitsaavan verkoston toiminnan tehostamisen sekä laadun paranemisen. Tämä saavutetaan viemällä toimintamalli osaksi jokapäiväistä työtä, lähelle valmistusta, ja ohjeistamalla, että jokainen tietää kuinka toimia. Esimerkiksi työssä tarkastellun yhden tuotteen osalta ohjeistus turhan työn vähentämiseksi tuotti 19 % tuotannon kasvun työvuoron aikana. Tilaus-toimitusketjun tuottavuuteen ja kannattavuuteen voidaan vaikuttaa merkittävästi käymällä läpi konkreettisesti valmistettavat tuotteet ja niihin liittyvät toiminnot. Diplomityössä tehtyjen tarkastelujen ja havaintojen avulla käytännön työ tulee jatkumaan yritysverkostossa tapahtuvassa kehitystyössä.

Curbing Inflammation in hemorrhagic trauma: a review

Trauma is one of the world's leading causes of death within the first 40 years of life and thus a significant health problem. Trauma accounts for nearly a third of the lost years of productive life before 65 years of age and is associated with infection, hemorrhagic shock, reperfusion syndrome, and inflammation. The control of hemorrhage, coagulopathy, optimal use of blood products, balancing hypo and hyperperfusion, and hemostatic resuscitation improve survival in cases of trauma with massive hemorrhage. This review discusses inflammation in the context of trauma-associated hemorrhagic shock. When one considers the known immunomodulatory effects of traumatic injury, allogeneic blood transfusion, and the overlap between patient populations, it is surprising that so few studies have assessed their combined effects on immune function. We also discuss the relative benefits of curbing inflammation rather than attempting to prevent it.

Russia’s WTO membership and its effects on global wood sourcing

The aim of the thesis was to find the effects of World Trade Organization and economic integration on the wood sourcing process from Russia to Finland and to the European Union. Also, the fo reign direct investments to Russian forest industry are studied within the WTO and Economic integration framework. Qualitative interviews were carried out as primary data (total of 5 interviews). Research studies and articles regarding the same subject were used as secondary data. Results show that companies may increase their volumes of imported timber from Russia due to the reduction of custom tariffs. Russian companies are becoming more productive, but there are still several problems with legislation, infrastructure, availability and harvesting profitability in some areas. These suggest that sourcing process may not be profitable in the future. The Russian forest industry sector will not gain significant foreign direct investments in the recent years because of the infrastructure and overall atmosphere of investments. Forest industry is not seen as profitable enough. The demand for cellulose and paper in Russia is not increasing fast enough and the cost inflation is cutting the profits made from producing in Russia.

Health management practices and disease prevalence in dairy sheep systems in Argentina

A cross-sectional survey of 19 dairy sheep farms in Argentina was carried out with the purpose to know farm management, health practices, and occurrence and mortality of diseases. The survey comprised 40% of all sheep milking farms in Argentina. A questionnaire was conducted by way of personal interviews with sheep owners during farm visits. The proportions of farms reporting routine vaccination for clostridial diseases, contagious ecthyma, pneumonia and mineral and vitamin parenteral administration were 63%, 47.3%, 16.6% and 42.1% respectively. Regular treatment against lice was used in 37.5% of the farms, and 89.5% o the farmers treated against gastrointestinal nematodes (GIN). The mean number of GIN drenches per farm was 2.26±1.78 annually. In 68.4% of the milking flocks the California Mastitis Test was regularly done and 55.6% of the farmer managers had sampled their flocks once a year for Brucella ovis antibodies. During the pre-mating period respectively 68.4% and 50% of farmers clinically examined their rams and ewe for general health and teeth condition. The udders of ewes were frequently inspected at the start of each milking period. The most important parasite problems noticed were GIN (reported by 57.9% of farmers), lice (57.9%) and scabies (10.5%) and the most frequent infectious diseases were ecthyma (73.7%), pneumonia and other respiratory problems (57.9%), clinical mastitis (55.6%), clostridial diseases (36.9%) and foot lameness (35.2%). Photosensitivity (47.4%) and ruminal acidosis (42.1%) were reported as other frequent toxic or metabolic disorders. Owners mentioned that the mean lifespan or milk productive time per ewe was 4.5±1.4 years. Perinatal lamb mortality was 8.5% and the total flock mortality rates, above the first 24 h of life was 6.9%. The high rates of lamb mortality during the pre-weaning (10.3%) and post-weaning (5.9%) periods indicate that this problem, as well as the most prevalent diseases, should be the subject of further studies.

Nuclear and mitochondrial DNA markers in traceability of retail beef samples

Several characteristics are important in a traceability system of animal products, such as age at slaughter, breed composition, besides information of the productive chain. In general, the certification agent records information about the animals and the system which it came from, although cannot guarantee that the slaughtering, meat processing and distribution are error proof. Besides, there is a differential price, at least at the international market, based on sex and breed composition of the animals. Genetic markers allow identification of characteristics controlled in the beef cattle traceability program, as sex and breed composition, in order to correctly identify and appraise the final product for the consumer. The hypothesis of this study was that the majority beef samples retailed in the local market originate from female with a great participation of zebu breeds. Therefore, the objective of this work was to characterize retail beef samples with DNA markers that identify cattle sex and breed composition. Within 10 beef shops localized in Pirassununga, SP, Brazil, 61 samples were collected, all were genotyped as harboring Bos taurus mitochondrial DNA and 18 were positive for the Y chromosome amplification (male). For the marker sat1711b-Msp I the frequency of the allele A was 0.278 and for the marker Lhr-Hha I the frequency of the allele T was 0.417. The results of sat1711b-Msp I and Lhr-Hha I allelic frequencies are suggestive that the proportion of indicus genome compared with the taurine genome in the market meat is smaller than the observed in the Nellore breed. The procedure described in this study identified sex and subspecies characteristics of beef meat samples, with potential application in meat products certification in special as an auxiliary tool in beef cattle traceability programs.

Records of performance and sanitary status from a dairy cattle herd in southern Brazil

Over the last decades, the emphasis on the health of dairy cows has changed from an individual to a herd level. In this scenario, the role played by the recording system and its interpretation by veterinarians has gained primordial importance. The records of productive and reproductive performance and of sanitary status from a southern Brazilian dairy cattle herd have been presented and discussed. The period of study was 2000-2009. Mean values per lactation period were 349D 8436M 290F 275P 201SCS (D: days in lactation, M: kg of milk yield, F: kg of fat, P: kg of protein and SCS: somatic cell score in 1000 cells/ml of milk). Major indexes of reproductive efficiency included age at first calving (31 months), services per conception (2.1), intercalving interval (428 days), calving to conception interval (146 days), mean annual rates of parturitions (76.2%), fetal losses (9.8-19.0%), and stillbirths (3.6%), apart of voluntary waiting period (94 days). Main information on sanitary status of the herd was associated with the mean prevalence of common disorders of dairy cattle such as anaplasmosis (29.8%), mastitis (27.8%), digital diseases (26.3%), ovarian cysts (21.3%), placental retention (19.7%), postpartum uterine infections (10.6%), and calf diarrhea (23.7%) and pneumonia (16.8%), among others. In addition, culling reasons (low reproductive performance [56.3%] and udder/mastitis problems [33.6%]), causes of cattle deaths (anaplasmosis [16.4%] and leukosis [11.4]), and the impact of cattle diseases such as tuberculosis, leukosis, and neosporosis on the herd have also been presented and succinctly discussed. Numbers between brackets represent rates accumulated in the 10-year period.

Research of Salmonella spp. and evaluation of pathogenicity, cytotoxicity of Escherichia coli isolates proceeding from sparrows (Passer domesticus)

The aim of this study was to research the occurrence of Salmonella spp. and Escherichia coli in feces samples of sparrows, as well as to identify the pathogenicity, cytotoxicity and sensitivity profile of the isolates to antimicrobial use. Two hundred and twenty eight sparrows were captured in eight farms. The in vitro pathogenicity test was performed by the isolates culture on congo red-magnesium oxalate Agar, whilst the in vivo pathogenicity test was performed in one day-old chicks. In order to study the cytotoxic effects of indicators, samples were inoculated into Vero cells. The results obtained for Escherichia coli isolation confirmed the presence of this microorganism in 30 (13.2%) of the evaluated samples. Out of those isolates, 10 (33.3%) presented the capacity of absorbing ongo red. As for in vivo pathogenicity a 68.0% of mortality rate of the evaluated samples was observed. Out of 20 isolates tested for cytotoxin production, none of them presented cytotoxic effect in the Vero cells. The Salmonella spp was isolated only in one sample (0.04%), and it was identified as Salmonella enterica subspecies houtenae. Results obtained through this research indicate the need for new studies to identify other virulence factors of E. coli samples and to delineate the phylogenetic profile of the isolates in order to establish a relation with colibacillosis outbreaks in chickens and broilers in the studied region, as well as to analyze the critical points in the aviculture productive chain to identify the source of Salmonella enterica subspecies houtenae.

Syntyykö Suomeen puulaaksoja - Suomen puutuoteteollisuuden pk-yritysten tila ja tulevaisuus

Metsäteollisuus on tullut Suomeen ulkomaisen pääoman ja tietotaidon avulla vajaat kaksisataa vuotta sitten. Se on toiminut melkein koko jatkosodan jälkeisen ajan suojatussa ympäristössä ja ulkomaisesta kilpailusta riippumattomassa toimintaympäristössä. Kuten Porter ja muut ovat todistaneet, tällainen toimintaympäristö ei kehitä kansainvälisesti kilpailukykyistä teollisuutta globaaleilla markkinoilla. Liittyminen Euroopan unioniin ja sittemmin Euroopan rahaliittoon saattoi puunjalostusteollisuuden täysin uudenlaiseen kilpailutilanteeseen. Sama tapahtui myös alan pk-yrityksille, jotka olivat joutuneet toimimaan heikosti kilpailluilla raaka-ainemarkkinoilla. Tutkimus on tulevaisuudentutkimus, jossa tutkimusongelmia lähestytään kolmen teorian avulla. Porterin klusteriteoria tarjoaa mahdollisuuden arvioida metsäteollisuutta sekä kokonaisuutena että toimivana monimuotoisena organisaationa, jossa kustannukset ja hinta muodostuvat arvoketjun toimijoiden osakustannuksista. Bionomiateoria eli darvinistinen talousteoria testaa suomalaisen puunjalostusteollisuuden pk-yritysten kilpailukykyä ja paineita hakeutua edullisemmille toiminta- alueille. Evoluutioteoria tarkastelee sukupolvenvaihdoksen problematiikkaa. Sukupolvenvaihdoksen onnistuminen muodostuu puutoimialan elämän ja kuoleman kysymykseksi. Tämä on etenkin pk-yrityksiä kohtaava ongelma. Asiaa selvitettiin Mauno Rintalan suorittamalla kyselytutkimuksella Puuteollisuusyrittäjien jäsenistön keskuudessa. Ongelma johtuu suurista sodan jälkeen syntyneistä ikäluokista. Nämä vuosina 1945– 50 syntyneet ovat siirtymässä eläkkeelle vuosien 2005 ja 2015 välillä. Kyseisissä ikäluokissa yritystiheys on noin kaksi kertaa suurempi kuin sen jälkeisissä ikäluokissa. Suoritetun kyselyn sekä muiden suomalaisten ja kansainvälisten tutkimusten perusteella näyttää siltä, että eläkkeelle siirryttäessä vain noin 30 %:lla yrityksistä on jatkaja tiedossa suvusta tai lähipiiristä. Tämä merkitsee sitä, että 70 % eläköityvän ikäluokan omistamista yrityksistä poistuu pysyvästi markkinoilta. Suomessa poistuma merkitsee noin 40 % koko yritysvarannosta eli noin 80 000 yritystä. Tilastot toimivien yritysten määrästä ovat kuitenkin hyvin ristiriitaisia, joten todellista määrää on mahdoton arvioida. Noin suuren määrän poistuminen markkinoilta uhkaa jo hyvinvointivaltion perusrakenteita. Tutkimustulos edellyttää nopeita toimenpiteitä teollisten pkyritysten pelastamiseksi ja säilyttämiseksi Suomessa. Sukupolvenvaihdoksen onnistuminen on tässä prosessissa ensiarvoisessa asemassa. Kaikkien edellä mainittujen yritysten poistuminen markkinoilta edellyttäisi noin 400 000 uuden yrityksen perustamista, koska ainoastaan noin 20 % yrityksistä selviää ensimmäiset kolme vuotta. Tutkimukseen perustuen esitetään prosessimalli sukupolvenvaihdoksen suorittamiseksi. Suomen tärkeimmissä kilpailijamaissa valtioiden metsäomistus on määräävässä asemassa. Meillä metsät ovat yksityisessä omistuksessa ja vain pieni osa valtion omistuksessa. Puumarkkinat toimivat markkinatalouden ehdoilla ilman valtion ohjausta. Ongelmaksi on kehittymässä puun saanti. Metsänomistus on sukupolvien myötä hajaantunut hyvin pieniksi metsälöiksi. Nykyiset metsänomistajat asuvat kaupungeissa ja ovat pääosin palkkatyössä. He eivät ole samalla tavoin riippuvaisia puutuloista kuin heidän esi-isänsä. Metsäverotuksen uudistuminen lisää puun saannin epävarmuutta. Se on muuttumassa pinta-alaverotuksesta puun myynnin verotukseen. Puun myynti on vilkasta ennen järjestelmien vaihtumista ja vähäisempää sen jälkeen. Myös näitä ongelmia on pyritty ratkomaan uudenlaisen metsänomistusmallin avulla. Puuteollisuus on hyvin vanha teollisuudenala. Raaka-aine muodostaa määräävän osan kustannuksista. Muutokset ovat hitaita ja todelliset innovaatiot pitkäkestoisia. Uusia innovaatioita tapahtuu harvoin. Kannattavuutta parannetaan tuoteprosessien ja arvoketjujen kehittämisen kautta. Yhteiskunnan osuus alan kehittämisessä ja säilyttämisessä on ratkaiseva. Asioiden moninaisuus tekee tutkimuksen vaikeaksi, mutta sitäkin tärkeämmäksi kansantalouden kannalta. Tällaisissa suurissa murroksissa korostuu kaikkien päättävien tahojen henkinen valmius ja tahto tehdä oikeita ratkaisuja oikeaan aikaan.

A quality and cost approach for welding process selection

The aim of this work was to propose, apply and evaluate a methodical approach to select welding processes in a productive environment based on market requirements of Quality and Costs. A case study was used. The welds were carried out in laboratory, simulating the joint conditions of a manufacturer and using several welding processes: SMAW, GTAW, pulsed GTAW, GMAW with CO2 and Ar based shielding gases and pulsed GMAW. For Quality analysis geometrical aspects of the beads were considered and for Cost analysis, welding parameters and consumable prices. Quantitative indices were proposed and evaluated. After that, evaluation of both Quality and Costs was done, showing to be possible to select the most suitable welding process to a specific application, taking into account the market conditions of a company.