Plasma biochemical responses of the planktivorous filter-feeding silver carp (Hypophthalmichthys molitrix) and bighead carp (Aristichthys nobilis) to prolonged toxic cyanobacterial blooms in natural waters

The planktivorous filter-feeding silver carp (Hypophthalmichthys molitrix) and bighead carp (Aristichthys nobilis) are the attractive candidates for bio-control of plankton communities to eliminate odorous populations of cyanobacteria. However, few studies focused on the health of such fishes in natural water body with vigorous toxic blooms. Blood parameters are useful and sensitive for diagnosis of diseases and monitoring of the physiological status of fish exposed to toxicants. To evaluate the impact of toxic cyanobacterial blooms on the planktivorous fish, 12 serum chemistry variables were investigated in silver carp and bighead carp for 9 months, in a large net cage in Meiliang Bay, a hypereutrophic region of Lake Taihu. The results confirmed adverse effects of cyanobacterial blooms on two phytoplanktivorous fish, which mainly characterized with potential toxicogenomic effects and metabolism disorders in liver, and kidney dysfunction. In addition, cholestasis was intensively implied by distinct elevation of all four related biomarkers (ALP, GGT, DBIL, TBIL) in bighead carp. The combination of LDH, AST activities and DBIL, URIC contents for silver carp, and the combination of ALT. ALP activities and TBIL, DBIL. URIC concentrations for bighead carps were found to most strongly indicate toxic effects from cyanobacterial blooms in such fishes by a multivariate discriminant analysis. (C) 2009 Elsevier B.V. All rights reserved.

Modelling and comparison of trapped fields in (RE)BCO bulk superconductors for activation using pulsed field magnetization

The ability to generate a permanent, stable magnetic field unsupported by an electromotive force is fundamental to a variety of engineering applications. Bulk high temperature superconducting (HTS) materials can trap magnetic fields of magnitude over ten times higher than the maximum field produced by conventional magnets, which is limited practically to rather less than 2 T. In this paper, two large c-axis oriented, single-grain YBCO and GdBCO bulk superconductors are magnetized by the pulsed field magnetization (PFM) technique at temperatures of 40 and 65 K and the characteristics of the resulting trapped field profile are investigated with a view of magnetizing such samples as trapped field magnets (TFMs) in situ inside a trapped flux-type superconducting electric machine. A comparison is made between the temperatures at which the pulsed magnetic field is applied and the results have strong implications for the optimum operating temperature for TFMs in trapped flux-type superconducting electric machines. The effects of inhomogeneities, which occur during the growth process of single-grain bulk superconductors, on the trapped field and maximum temperature rise in the sample are modelled numerically using a 3D finite-element model based on the H-formulation and implemented in Comsol Multiphysics 4.3a. The results agree qualitatively with the observed experimental results, in that inhomogeneities act to distort the trapped field profile and reduce the magnitude of the trapped field due to localized heating within the sample and preferential movement and pinning of flux lines around the growth section regions (GSRs) and growth sector boundaries (GSBs), respectively. The modelling framework will allow further investigation of various inhomogeneities that arise during the processing of (RE)BCO bulk superconductors, including inhomogeneous Jc distributions and the presence of current-limiting grain boundaries and cracks, and it can be used to assist optimization of processing and PFM techniques for practical bulk superconductor applications. © 2014 IOP Publishing Ltd.

Low temperature annealing effects on the structure and optical properties of ZnO films grown by pulsed laser deposition

ZnO thin films were deposited on glass substrates at room temperature (RT) similar to 500 degrees C by pulsed laser deposition (PLD) technique and then were annealed at 150-450 degrees C in air. The effects of annealing temperature on the microstructure and optical properties of the thin films deposited at each substrate temperature were investigated by XRD, SEM, transmittance spectra, and photoluminescence (PL). The results showed that the c-axis orientation of ZnO thin films was not destroyed by annealing treatments: the grain size increased and stress relaxed for the films deposited at 200-500 degrees C, and thin films densified for the films deposited at RT with increasing annealing temperature. The transmittance spectra indicated that E-g of thin films showed a decreased trend with annealing temperature. From the PL measurements, there was a general trend, that is UV emission enhanced with lower annealing temperature and disappeared at higher annealing temperature for the films deposited at 200-500 degrees C; no UV emission was observed for the films deposited at RT regardless of annealing treatment. Improvement of grain size and stoichiometric ratio with annealing temperature can be attributed to the enhancement of UV emission, but the adsorbed oxygen species on the surface and grain boundary of films are thought to contribute the annihilation of UV emission. It seems that annealing at lower temperature in air is an effective method to improve the UV emission for thin films deposited on glass substrate at substrate temperature above RT.

Surface morphology of AlN buffer layer and its effect on GaN growth by metalorganic chemical vapor deposition

The in situ optical reflectivity measurements are employed to monitor the GaN epilayer growth process above low-temperature AlN buffer layer on c-plane sapphire substrate by metalorganic chemical vapor deposition. It is found that the lateral growth of GaN islands and their coalescence is promoted in the initial growth stage if the AlN buffer layer is treated with a long annealing time and has an optimal thickness: As confirmed by atomic force microscopy observations, the quality of GaN epilayers is closely dependent on the surface morphology of AlN buffer layer, especially the grain size and nuclei density after the annealing treatment. (C) 2004 American Institute of Physics.

Nanostructure in the p-layer and its impacts on amorphous silicon solar cells

The open circuit voltage (V-oc) of n-i-p type hydrogenated amorphous silicon (a-Si:H) solar cells has been examined by means of experimental and numerical modeling. The i- and p-layer limitations on V-oc are separated and the emphasis is to identify the impact of different kinds of p-layers. Hydrogenated protocrystalline, nanocrystalline and microcrystalline silicon p-layers were prepared and characterized using Raman spectroscopy, high resolution transmission electron microscopy (HRTEM), optical transmittance and activation energy of dark-conductivity. The n-i-p a-Si:H solar cells incorporated with these p-layers were comparatively investigated, which demonstrated a wide variation of V-oc from 1.042 V to 0.369 V, under identical i- and n-layer conditions. It is found that the nanocrystalline silicon (nc-Si:H) p-layer with a certain nanocrystalline volume fraction leads to a higher V-oc. The optimum p-layer material for n-i-p type a-Si:H solar cells is not found at the onset of the transition between the amorphous to mixed phases, nor is it associated with a microcrystalline material with a large grain size and a high volume fraction of crystalline phase. (c) 2006 Elsevier B.V. All rights reserved.

Light-induced changes in diphasic nanocrystalline silicon films and solar cells

A series of diphasic nanocrystalline silicon films and solar cells was prepared using different hydrogen dilution ratios of silane by very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD). It was observed that after light soaking the open circuit voltage (V-oc) of the diphasic solar cells increased, while that of amorphous silicon solar cells decreased. Raman scattering spectroscopy was performed on the series of diphasic silicon films before and after light soaking. It was found that after light soaking the nanostruclures in the diphasic nanocrystalline silicon films were changed. Both the grain sizes and grain volume fraction reduced, while the grain boundary components increased. These results provide experimental evidence for the conjecture that the light-induced increase in V-oc of the diphasic nanocrystalline solar cells might be induced by the changes in the nanostructure of the intrinsic layer. (c) 2006 Elsevier B.V. All rights reserved.

Nanostructure in the p-layer and its impacts on amorphous silicon solar cells

The open circuit voltage (V-oc) of n-i-p type hydrogenated amorphous silicon (a-Si:H) solar cells has been examined by means of experimental and numerical modeling. The i- and p-layer limitations on V-oc are separated and the emphasis is to identify the impact of different kinds of p-layers. Hydrogenated protocrystalline, nanocrystalline and microcrystalline silicon p-layers were prepared and characterized using Raman spectroscopy, high resolution transmission electron microscopy (HRTEM), optical transmittance and activation energy of dark-conductivity. The n-i-p a-Si:H solar cells incorporated with these p-layers were comparatively investigated, which demonstrated a wide variation of V-oc from 1.042 V to 0.369 V, under identical i- and n-layer conditions. It is found that the nanocrystalline silicon (nc-Si:H) p-layer with a certain nanocrystalline volume fraction leads to a higher V-oc. The optimum p-layer material for n-i-p type a-Si:H solar cells is not found at the onset of the transition between the amorphous to mixed phases, nor is it associated with a microcrystalline material with a large grain size and a high volume fraction of crystalline phase. (c) 2006 Elsevier B.V. All rights reserved.

Light-induced changes in diphasic nanocrystalline silicon films and solar cells

A series of diphasic nanocrystalline silicon films and solar cells was prepared using different hydrogen dilution ratios of silane by very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD). It was observed that after light soaking the open circuit voltage (V-oc) of the diphasic solar cells increased, while that of amorphous silicon solar cells decreased. Raman scattering spectroscopy was performed on the series of diphasic silicon films before and after light soaking. It was found that after light soaking the nanostruclures in the diphasic nanocrystalline silicon films were changed. Both the grain sizes and grain volume fraction reduced, while the grain boundary components increased. These results provide experimental evidence for the conjecture that the light-induced increase in V-oc of the diphasic nanocrystalline solar cells might be induced by the changes in the nanostructure of the intrinsic layer. (c) 2006 Elsevier B.V. All rights reserved.

Polycrystalline silicon thin films and solar cells prepared by rapid thermal CVD

Polycrystalline silicon (poly-Si) films(similar to 10 mu m) were grown from dichlorosilane by a rapid thermal chemical vapor deposition (RTCVD) technique, with a growth rate up to 100 Angstrom/s at the substrate temperature (T-s) of 1030 degrees C. The average grain size and carrier mobility of the films were found to be dependent on the substrate temperature and material. By using the poly-Si films, the first model pn(+) junction solar cell without anti-reflecting (AR) coating has been prepared on an unpolished heavily phosphorus-doped Si wafer, with an energy conversion efficiency of 4.54% (AM 1.5, 100 mW/cm(2), 1 cm(2)).

沈阳城市森林生态系统健康与管理研究

本文系统研究了沈阳城市森林的布局与结构、城市森林功能、城市森林病虫害发生与树木健康状况和城市自然资源与社会经济状况等指标对沈阳城市森林生态系统健康与管理的影响。同时一，采用2种生态系统健康评价方法对沈阳城市森林生态系统健康状况进行了评价，并提出了沈阳城市森林生态系统健康管理的对策。研究结果如下：1、截至2004年末，沈阳城市森林植被覆盖率已经达到35％，城市森林林地分布基本合理，但需要进一步加强道路林地、居住区林地和城郊大面积生态林建设。2、沈阳城市森林以乔木为主，乔灌株数比为1.7：1，乔灌的覆盖度比约为7:1。3、沈阳城市森林不同类型林地中植物组成不同。公园林地中有74个属，137个种（变种）；庭院林地中有53个属，104个种（变种）；居住区林地中有45个属，81个种（变种）；道路林地中有43个属，94个种（变种）；运河风景林地中有75个属，142个种（变种）；棋盘山风景林地中有48个属，118个种（变种）。4、公园林地、庭院林地、居住区林地、道路林地和运河风景林地的Shannon一Wiener多样性指数分别为2.78、3.05、3.15、3.18和3.18，均匀度指数分别为0.56、0.66、0.72、0.70和0.64。除了棋盘山风景林地外，沈阳城市森林中栽植总量超过乔木总量5％的乔木树种有7个属，分别为李、柳树、杨树、桧柏、榆树、槐树和银杏，7种树木总量达到了全部乔木总量的82.09％；栽植总量超过灌木总量5％的灌木树种也有7个属，分别为水腊、丁香、李属，小聚、玫瑰、忍冬和连翘，7个属灌木总量达到了全部灌木总量的87.92％。5、公园林地、庭院林地、道路林地和防护林地中OBH＜20cm、20cm＜DBH＜60cm和DBH＞60cm树木的比例分别为：57.9％、40.0％、2.1％，49.2％、47.8％、3.0％，65.3％、33.1％、1.6％和64.6％、34.9％、0.5％，表明沈阳城市森林树木的规格总体上偏小。6、经样方调查和CITYgreen模型计算，沈阳城市森林的生态效益约2.0亿USD／yr.。公园林地、庭院林地和风景林地的景观指标相对较高；道路林地和居住区林地的景观效果一般；防护林地的景观效果较差。7、目前已经发现的沈阳城市森林病害约600余种，虫害约700余种，其中杨树主要病虫害39种，柳树的主要病虫害有33种，榆树和槐树的主要病虫害均为，1种。杨柳树腐烂病、光肩星天牛、天幕毛虫、桃红颈天牛和美国白蛾等是近10年来沈阳城市森林中普遍发生和造成严重危害的主要病虫害。沈阳城市森林主要树木的平均健康指数为2.68，处于一般健康状态。8、沈阳城市森林的土壤和水资源状况均不利于树木的健康生长，沈阳的社会经济发展也有待于进一步提高。9、经过生物指示物法（光肩星天牛为生物指示物）、专家权重法、公众问卷调查和对比研究，沈阳城市森林生态系统总体上处于亚健康状态。10、通过对沈阳城市森林资源、管理状况的调查研究和健康状况的评价，本文提出了沈阳城市森林生态系统健康管理的对策，包括合理规划沈阳城市森林林地布局，增加道路林地、居住区林地和城郊林地的面积和植被覆盖率；调整树木种类组成，避免单一或少数树种的大量栽植，提高生物多样性水平；保护大树和古树；增加城市森林管理资金的投入；应用先进技术，采取科学的病虫害防治和植物养护方法，促进树木的健康生长等。This project systematically studied the urban forest ecosystem health and management in Shenyang. The study explored factors, such as urban forest structure, distribution, pests, aesthetic value, ecological benefit, natural resources and socieo-economic status, that affecting the urban forest ecosystem health and management. Two methods were used to evaluate the ecosystem health. This project also proposed Shenyang's urban forest ecosystem health management strategies. The research results can be summarized as follows: 1. As of the end of 2004, urban forest coverage in Shenyang is about 35%, and is in relatively even patch distribution pattern. However, the street trees and roadside forest patches, residential block forest patches should be enhanced. 2. Trees are the major component of the Shenyang s urban forest, followed by shrubs. The quantity ratio of tree to shrub is about 1.7:1, and the coverage ratio of trees to shrub is about 7:1. 3. Species composition varies by location. There are 74 genera, 137 species (including varieties) in the public parks; 53 genera, 104 species (and var.) in the green spaces of the institution (including school), factory, and company; 45 genera, 81 species (var.) in residential blocks; 43 genera, 94 species (var.) in streets and roadside forest patches; 75 genera, 142 species (var.) in the Canal landscape forest patches; 48 genera, 118 species (var.) in the Qipan Mountain recreation forest. 4. The Shannon-Woener indices varies in parks, in institution, factory, and company yards, in streets and roadside forest patches, in residential blocks.there are 2.78, 3.05, 3.18, 3.15, 3.18, respectively; and the evenness indices are 0.56, 0.66, 0.70, 0.72, 0.64, respectively. Besides the Qipan Mountain forest patches, trees of 7 genera, Prunus spp., Salix spp., Populus spp., Sabina spp., Ulmus spp., Robinia spp. and Ginkgo biloba are of more than 5% the total urban trees, respectively. In fact, trees from these 7 genera are about 82% of all trees in Shenyang's urban forests. In terms of shrubs, species of 7 genera, Ligustrum spp., Syringa spp., Prunus spp., Berberis spp., Rosa spp., Lonicera spp., and Forsythia spp. are more than 5% the total urban shrubs, respectively. 88% of all the shrubs in Shenyang s urban forest are from these 7 genera. 5. The diameter class of DBH<20cm, 20cmand DBH>60cm of trees in parks, in institution, factory, and company yards, in in streets and roadside forests, and in protective forests are 57.9%, 40.0%, 2.1%; 49.2%, 47.8%, 3.0%; 65.3%, 33.1%, 1.6%; and 64.6%, 34.9%, 0.5%, respectively. The result indicated that the DBH is relatively small in Shenyang s urban forests. 6. Using random plots sampling and CITYgreen model calculation, the ecological benefit of Shenyang's urban is about 0.2 billion US dollars per year. The aesthetic value of parks, institution and company yards, and scenary forest patches is relative high; however, the aesthetic value of protective forest patches is low. 7. There are more than 600 types of diseases and more than 700 kinds of insects in Shenyang's urban forest. Among them, Populus spp., Salix spp., Ulmus spp. and Robinia spp., are attached mainly by 39, 33, 11, and 11, difference types of pests respectively. The rot disease of the Populus spp. and Salix spp., and the insects such as, Anoplophora glabripennis, Malacosoma neustria, Aromia bungii, and Hyphantria cunea are major pests in Shenyang s urban forest for the past 10 years. The trees health condition is relatively poor by having the average health index of 2.68 for major species. 8. The urban soil and water resource are not favorable to tree's growth in Shenyang, and so is the socieo-economic status. 9. Through using bio-indicator, professional and public evaluation, and comparision with other urban forests, it can be concluded that the status of Shenyang s urban forest is not very healthy in general. 10. To improve the urban forest ecosystem health in Shenyang, a better urban forest design need to be implemented to enhance the area and vegetation coverage of the street and roadside forests, the residential block forests, and the surburb forest Species biodiversity need to be enhanced by adjust the species composition of urban forest trees to reduce the single or several tree species populations and to plant more varieties. A better fundings for urban forest health management need to be budgeted. Advanced technologies in tree care and scientific measures to control pests need to be adopted to prove better care for plants and to keep trees grow healthfully.

Influence of processing temperature on microstructure and microhardness of copper subjected to high-pressure torsion

Cu samples were subjected to high-pressure torsion (HPT) with up to 6 turns at room temperature (RT) and liquid nitrogen temperature (LNT), respectively. The effects of temperature on grain refinement and microhardness variation were investigated. For the samples after HPT processing at RT, the grain size reduced from 43 mu m to 265 nm, and the Vickers microhardness increased from HV52 to HV140. However, for the samples after HPT processing at LNT, the value of microhardness reached its maximum of HV150 near the center of the sample and it decreased to HV80 at the periphery region. Microstructure observations revealed that HPT straining at LNT induced lamellar structures with thickness less than 100 nm appearing near the central region of the sample, but further deformation induced an inhomogeneous distribution of grain sizes, with submicrometer-sized grains embedded inside micrometer-sized grains. The submicrometer-sized grains with high dislocation density indicated their nonequilibrium nature. On the contrary, the micrometer-sized grains were nearly free of dislocation, without obvious deformation trace remaining in them. These images demonstrated that the appearance of micrometer-sized grains is the result of abnormal grain growth of the deformed fine grains.

Modelling raindrop impact and splash erosion processes within a spatial cell: a stochastic approach

A new approach is proposed to simulate splash erosion on local soil surfaces. Without the effect of wind and other raindrops, the impact of free-falling raindrops was considered as an independent event from the stochastic viewpoint. The erosivity of a single raindrop depending on its kinetic energy was computed by an empirical relationship in which the kinetic energy was expressed as a power function of the equivalent diameter of the raindrop. An empirical linear function combining the kinetic energy and soil shear strength was used to estimate the impacted amount of soil particles by a single raindrop. Considering an ideal local soil surface with size of I m x I m, the expected number of received free-failing raindrops with different diameters per unit time was described by the combination of the raindrop size distribution function and the terminal velocity of raindrops. The total splash amount was seen as the sum of the impact amount by all raindrops in the rainfall event. The total splash amount per unit time was subdivided into three different components, including net splash amount, single impact amount and re-detachment amount. The re-detachment amount was obtained by a spatial geometric probability derived using the Poisson function in which overlapped impacted areas were considered. The net splash amount was defined as the mass of soil particles collected outside the splash dish. It was estimated by another spatial geometric probability in which the average splashed distance related to the median grain size of soil and effects of other impacted soil particles and other free-falling raindrops were considered. Splash experiments in artificial rainfall were carried out to validate the availability and accuracy of the model. Our simulated results suggested that the net splash amount and re-detachment amount were small parts of the total splash amount. Their proportions were 0.15% and 2.6%, respectively. The comparison of simulated data with measured data showed that this model could be applied to simulate the soil-splash process successfully and needed information of the rainfall intensity and original soil properties including initial bulk intensity, water content, median grain size and some empirical constants related to the soil surface shear strength, the raindrop size distribution function and the average splashed distance. Copyright (c) 2007 John Wiley & Sons, Ltd.

Electrolytic Deposition and Diffusion of Lithium onto Magnesium-9 Wt Pct Yttrium Bulk Alloy in Low-Temperature Molten Salt of Lithium Chloride and Potassium Chloride

The electrolytic deposition and diffusion of lithium onto bulk magnesium-9 wt pct yttrium alloy cathode in molten salt of 47 wt pct lithium chloride and 53 wt pct potassium chloride at 693 K were investigated. Results show that magnesium-yttrium-lithium ternary alloys are formed on the surface of the cathodes, and a penetration depth of 642 mu m is acquired after 2 hours of electrolysis at the cathodic current density of 0.06 A center dot cm(-2). The diffusion of lithium results in a great amount of precipitates in the lithium containing layer. These precipitates are the compound of Mg41Y5, which arrange along the grain boundaries and hinder the diffusion of lithium, and solid solution of yttrium in magnesium. The grain boundaries and the twins of the magnesium-9 wt pct yttrium substrate also have negative effects on the diffusion of lithium.

Effects of cerium on the microstructure and mechanical properties of Mg-20Zn-8Al alloy

Mg-20Zn-8Al-xCe(x=0-2 wt.%) alloys were prepared by metal mould casting method, the effects of Ce on the microstructure and mechanical properties of the alloys were investigated. The results showed that the dendrite as well as gram size were refined by the addition of Ce, and the best refinement was obtained in 1.39% Ce containing alloy. The main phases in the as cast alloys were alpha-Mg and tau-Mg-32 (Al, Zn)(49), and Al4Ce phase was found in the alloys contained more than 1.39% Ce. The addition of Ce improved the mechanical properties of the alloys. The strengthening mechanism was attributed to grain refinement and compound reinforced.

The microstructure and mechanical properties of Mg-8Zn-8Al-4RE magnesium alloy

The Mg-8Zn-8Al-4RE (RE = mischmetal, mass%) magnesium alloy was prepared by using casting method. The microstructure and mechanical properties of as-cast alloy, solid solution alloy and aged alloy samples have been investigated. Optical microscopy, X-ray diffractometery and scanning electron microscope attached energy spectrometer were used to characterize the microstructure and phase composition for the alloy. Net shaped tau-Mg-32(Al,Zn)(49) phase was obtained at the grain boundary, and needle-like or blocky Al11RE3 phase disperses in grain boundary and alpha-Mg matrix. The tau-Mg-32(Al,Zn)(49) phase disappeared during solution treatment and a new phase of Al(2)CeZn2 formed during subsequent age treatment. The mechanical properties were performed by universal testing machine at room temperature, 150 degrees C and 200 degrees C, separately. The ultimate tensile strength of as-cast alloy is lower compared to an age treatment alloy at 200 degrees C for 12h. The strengths decreased with enhancing test temperature, but elongation has not been effect by age treatment.