Comparative study of two needle models in terms of deflection during inferior alveolar nerve block

Objectives: The purpose of this study is to determine the possible differences in deflection between two needles of same length and external gauge but with different internal gauges during truncal block of the inferior alveolar nerve. The initial working hypothesis was that greater deflection may be expected with larger internal gauge needles. Study design: Four clinicians subjected 346 patients to inferior alveolar nerve block and infiltrating anesthesia of the buccal nerve trajectory for the surgical or conventional extraction of the lower third molar. A nonautoaspirating syringe system with 2 types of needle was used: a standard 27-gauge x 35-mm needle with an internal gauge of 0.215 mm or an XL Monoprotect® 27-gauge x 35-mm needle with an internal gauge of 0.265 mm. The following information was systematically recorded for each patient: needle type, gender, anesthetic technique (direct or indirect truncal block) and the number of bone contacts during the procedure, the patient-extraction side, the practitioner performing the technique, and blood aspiration (either positive or negative). Results: 346 needles were used in total. 190 were standard needles (27-gauge x 35-mm needle with an internal gauge of 0.215 mm) and 156 were XL Monoprotect®. Incidence of deflection was observed in 49.1% of cases (170 needles) where 94 were standard needles and 76 XL Monoprotect®. Needle torsion ranged from 0º and 6º. Conclusions: No significant differences were recorded in terms of deflection and internal gauge, operator, patient-extraction side, the anesthetic technique involved and the number of bone contacts during the procedure

Benefits and Limitations of Service Oriented Architecture

In this thesis I examine Service Oriented Architecture (SOA) considering both its positive and negative qualities for business organizations and IT. In SOA, services are loosely coupled and invoked through standard interfaces to enable business process independence from the underlying technology. As an architecture, SOA brings the key benefit of service reuse that may mean anything from simple application reuse to taking advantage of entire business processes across enterprises. SOA also promises interoperability especially by the Web services standards that enable platform independency. Cost efficiency is mainly a result of the savings in IT maintenance and reduced development costs. The most severe limitations of SOA are performance implications and security issues, but the applicability of SOA is also limited. Additional disadvantages of a service oriented approach include problems in data management and complexity questions, and the lack of agreement about SOA and its twofold nature as a business as well as technology approach leads to problematic interpretation of the available information. In this thesis I find the benefits and limitations of SOA for the purpose described above and propose that companies need to consider the decision to implement SOA carefully to determine whether the benefits will outdo the costs in the individual case.

Profitability Analysis of Service Contracts of Devices

The objective of this study has been to make a profitability analysis of service contracts for a company in Finland. The purpose has been to see how profitable the contracts are and if there possibly were some things to change or develop in the contracts. Allocation rules of cost accounting, service costs both profitability and management of services have been considered in the theory part. All the service contracts that have been valid at least three last accounting periods have been included in the study. All direct costs relating to the contracts have been collected and indirect costs have been assigned to the contracts. Profitability of the contracts has been calculated over three years. Results have been analyzed according to the key figures the company is controlling. Some suggestions for developments have been given at the end of the study. The study has shown differences between the contracts. Part of them has turned out to be like the profitability aims of the company and part less profitable. The study has shown that many factors have an effect on the profitability of the service contracts.

Les infections pneumococciques: état des lieux et perspectives en matière de vaccination de l'adulte [Pneumococcal infections: Appraisal and perspectives in terms of adult vaccination].

Pneumococcal diseases are the first cause of bacterial infections in adult and in the aged adult. While its considerable morbi-mortality is potentially preventable through vaccination, the interest of anti-pneumococcal vaccination in these populations is still debated. Effectiveness appraisal of current anti-pneumococcal vaccines and the perspectives in terms of preventive strategies against Streptococcus pneumoniae infections in the adult population are presented.

Impact of maternity care policy in Catalonia: a retrospective cross-sectional study of service delivery in public and private hospitals

Background: As a result of the growing number of interventions that are now performed in the context of maternity care, health authorities have begun to examine the possible repercussions for service provision and for maternal and neonatal health. In Spain the Strategy Paper on Normal Childbirth was published in 2008, and since then the authorities in Catalonia have sought to implement its recommendations. This paper reviews the current provision of maternity care in Catalonia. Methods: This was a descriptive study. Hospitals were grouped according to their source of funding (public or private) and were stratified (across four strata) on the basis of the annual number of births recorded within their respective maternity service. Data regarding the distribution of obstetric professionals were taken from an official government survey of hospitals published in 2010. The data on obstetric interventions (caesarean, use of forceps, vacuum or non-specified instruments) performed in 2007, 2010 and 2012 were obtained by consulting discharge records of 44 public and 20 private hospitals, which together provide care in 98% of all births in Catalonia. Proportions and confidence intervals were calculated for each intervention performed in all full-term (3742 weeks) singleton births. Results: Analysis of staff profiles according to the stratification of hospitals showed that almost all the hospitals had more obstetricians than midwives among their maternity care staff. Public hospitals performed fewer caesareans [range between 19.20% (CI 18.84-19.55) and 28.14% (CI 27.73-28.54)] than did private hospitals [range between 32.21% (CI 31.78-32.63) and 39.43% (CI 38.98-39.87)]. The use of forceps has decreased in public hospitals. The use of a vacuum extractor has increased and is more common in private hospitals. Conclusions: Caesarean section is the most common obstetric intervention performed during full-term singleton births in Catalonia. The observed trend is stable in the group of public hospitals, but shows signs of a rise among private institutions. The number of caesareans performed in accredited public hospitals covers a limited range with a stable trend. Among public hospitals the highest rate of caesareans is found in non-accredited hospitals with a lower annual number of births.

Impact of maternity care policy in Catalonia: a retrospective cross-sectional study of service delivery in public and private hospitals

Background: As a result of the growing number of interventions that are now performed in the context of maternity care, health authorities have begun to examine the possible repercussions for service provision and for maternal and neonatal health. In Spain the Strategy Paper on Normal Childbirth was published in 2008, and since then the authorities in Catalonia have sought to implement its recommendations. This paper reviews the current provision of maternity care in Catalonia. Methods: This was a descriptive study. Hospitals were grouped according to their source of funding (public or private) and were stratified (across four strata) on the basis of the annual number of births recorded within their respective maternity service. Data regarding the distribution of obstetric professionals were taken from an official government survey of hospitals published in 2010. The data on obstetric interventions (caesarean, use of forceps, vacuum or non-specified instruments) performed in 2007, 2010 and 2012 were obtained by consulting discharge records of 44 public and 20 private hospitals, which together provide care in 98% of all births in Catalonia. Proportions and confidence intervals were calculated for each intervention performed in all full-term (3742 weeks) singleton births. Results: Analysis of staff profiles according to the stratification of hospitals showed that almost all the hospitals had more obstetricians than midwives among their maternity care staff. Public hospitals performed fewer caesareans [range between 19.20% (CI 18.84-19.55) and 28.14% (CI 27.73-28.54)] than did private hospitals [range between 32.21% (CI 31.78-32.63) and 39.43% (CI 38.98-39.87)]. The use of forceps has decreased in public hospitals. The use of a vacuum extractor has increased and is more common in private hospitals. Conclusions: Caesarean section is the most common obstetric intervention performed during full-term singleton births in Catalonia. The observed trend is stable in the group of public hospitals, but shows signs of a rise among private institutions. The number of caesareans performed in accredited public hospitals covers a limited range with a stable trend. Among public hospitals the highest rate of caesareans is found in non-accredited hospitals with a lower annual number of births.

Success of service-intensive manufacturing firms - resource-based view

The main objective of this study is to examine the relationships between resources, competitive advantage and firm success. The study focuses, on one hand, on the financial performance of service-intensive manufac-turing firms against competitors with a lower service intensity and, on the other hand, on the resources as drivers for competitive advantage and success. The purpose of the theoretical part is to link the study in the field of the strategy research. The empirical part of the study is based on the quantitative analyses of the survey data collected from 50 major suppliers of industrial machinery and transportation equipment in Europe and North America. Results indicate that service-intensive manufacturing firms have performed better and their performance has been more stable vis-à-vis their peers. The main resources that differentiate service-intensive manufacturing firms from their non-service intensive competitors are service strategy and service-oriented top management. The analyses on the VRIO resources produced only a limited amount of information and solely service-centred culture appeared to be a rent generating resource.

The Impact of Service Quality and Relationship Quality on Customer Loyalty in Business-to-Business Context

The main objective of this Master’s Thesis was to examine the interrelations of service quality and relationship quality (customer satisfaction, trust and commitment), and find out are they antecedents for customer loyalty in business-to-business context. Literature review revealed some research gaps concerning these focal concepts, which should be studied more closely. The theoretical basis for this research was collected for evaluating a strategic increase of customer’s perceptions of service quality and relationship quality as well as customer loyalty in business-to-business environment, and it was tested empirically in a sample of 164 corporate customers, who responded to the Internet-based survey. The measures, used in the survey, were first assessed by using confirmatory factor analysis (CFA), and then the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. There was found support for a half of the hypothesized construct relations. The results of the research confirm the direct influence of trust and commitment on customer loyalty. Also, service quality turned out to have an indirect impact on customer loyalty through trust. No support, however, was offered for the proposed impact of customer satisfaction on loyalty in this case. The research provides managerially relevant and actionable results that may help service providers execute more specific customer relationship quality strategies that lead to higher customer loyalty.

The Effects of Service Quality, Customer Satisfaction and Customer Perceived Value on Behavioral Intentions

The intent of this research was to develop a model that describes the extent to which customer behavioral intentions are influenced by service quality, customer satisfaction and customer perceived value in the business-to-business service context. Research on customer behavioral intentions is quite fragmented and no generalized model has been presented. Thus, there was need for empirical testing. This study builds on the services marketing theory and assesses the relationships between the identified constructs. The data for the empirical analysis was collected via a quantitative online survey and a total of 226 usable responses were obtained for further analysis. The model was tested in an employment agency service setting. The measures used in this survey were first assessed by using confirmatory factor analysis (CFA) after which the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. The analysis identified that customer satisfaction played a pivotal role in the model as it was the only direct antecedent of customer behavioral intentions, however, customer perceived value showed a strong indirect impact on buying intentions via customer satisfaction. In contrast to what was hypothesized, service quality and customer perceived value did not have a direct positive effect on behavioral intentions. Also, a contradicting finding with current literature was that sacrifice was argued to have a direct but positive impact on customer perceived value. Based on the findings in this study, managers should carefully think of their service strategies that lead to their customers’ favorable behavioral intentions.

What do Sports Sponsors Really Want? The effects of service quality, service value and customer satisfaction on behavioral intentions in sports sponsorship context

The aim of this Master’s thesis was to study the antecedents of customer satisfaction and behavioral intentions and their relative relationships in the sports sponsorship context. The possible antecedents under investigation in the current research are service value and service quality. As the academic background in the sports sponsorship literature is still rather modest there was a need for further empirical testing. The theoretical part of the research builds on the existing services marketing literature with sports sponsorship and business-to-business contexts in mind. The empirical study focused on the case company Liiga-SaiPa Oy. The data for the empirical analysis was collected via quantitative online survey. The total sample consisted of 357 the case company’s business customers and a total of 80 usable responses were collected. The data was analyzed by using statistical analysis software, SPSS. According to the results of the empirical analysis the most important antecedent of behavioral intentions in the underlying context is customer satisfaction. Also service value was found to have a direct and positive relationship with behavioral intentions. Moreover no indirect relationships through satisfaction were found between service quality and service value and behavioral intentions. However both constructs of service value and service quality were diagnosed to have a direct and positive effect on customer satisfaction. Service quality was also found to be a direct antecedent of service value with other service value benefits. However a contradicting finding with the current literature was, that service value sacrifices were not found to have a significant relationship with overall service value perceptions.

Role of service and data reuse in enterprises

Digitalization has been predicted to change the future as a growing range of non-routine tasks will be automated, offering new kinds of business models for enterprises. Serviceoriented architecture (SOA) provides a basis for designing and implementing welldefined problems as reusable services, allowing computers to execute them. Serviceoriented design has potential to act as a mediator between IT and human resources, but enterprises struggle with their SOA adoption and lack a linkage between the benefits and costs of services. This thesis studies the phenomenon of service reuse in enterprises, proposing an ontology to link different kinds of services with their role conceptually as a part of the business model. The proposed ontology has been created on the basis of qualitative research conducted in three large enterprises. Service reuse has two roles in enterprises: it enables automated data sharing among human and IT resources, and it may provide cost savings in service development and operations. From a technical viewpoint, the ability to define a business problem as a service is one of the key enablers for achieving service reuse. The research proposes two service identification methods, first to identify prospective services in the existing documentation of the enterprise and secondly to model the services from a functional viewpoint, supporting service identification sessions with business stakeholders.