Analysis of soil wetting and solute transport in subsurface trickle irrigation

The increased use of trickle or drip irrigation is seen as one way of helping to improve the sustainability of irrigation systems around the world. However, soil water and solute transport properties and soil profile characteristics are often not adequately incorporated in the design and management of trickle systems. In this paper, we describe results of a simulation study designed to highlight the impacts of soil properties on water and solute transport from buried trickle emitters. The analysis addresses the influence of soil hydraulic properties, soil layering, trickle discharge rate, irrigation frequency, and timing of nutrient application on wetting patterns and solute distribution. We show that (1) trickle irrigation can improve plant water availability in medium and low permeability fine-textured soils, providing that design and management are adapted to account for their soil hydraulic properties, (2) in highly permeable coarse-textured soils, water and nutrients move quickly downwards from the emitter, making it difficult to wet the near surface zone if emitters are buried too deep, and (3) changing the fertigation strategy for highly permeable coarse-textured soils to apply nutrients at the beginning of an irrigation cycle can maintain larger amounts of nutrient near to and above the emitter, thereby making them less susceptible to leaching losses. The results demonstrate the need to account for differences in soil hydraulic properties and solute transport when designing irrigation and fertigation management strategies. Failure to do this will result in inefficient systems and lost opportunities for reducing the negative environmental impacts of irrigation.

A importância dos fluxos de caixa na análise da solvência, liquidez e visibilidade das empresas

Orientada por: Prof. Doutora Cláudia Lopes

Difficulties in access and estimates of public beds in intensive care units in the state of Rio de Janeiro

ABSTRACT OBJECTIVE To estimate the required number of public beds for adults in intensive care units in the state of Rio de Janeiro to meet the existing demand and compare results with recommendations by the Brazilian Ministry of Health. METHODS The study uses a hybrid model combining time series and queuing theory to predict the demand and estimate the number of required beds. Four patient flow scenarios were considered according to bed requests, percentage of abandonments and average length of stay in intensive care unit beds. The results were plotted against Ministry of Health parameters. Data were obtained from the State Regulation Center from 2010 to 2011. RESULTS There were 33,101 medical requests for 268 regulated intensive care unit beds in Rio de Janeiro. With an average length of stay in regulated ICUs of 11.3 days, there would be a need for 595 active beds to ensure system stability and 628 beds to ensure a maximum waiting time of six hours. Deducting current abandonment rates due to clinical improvement (25.8%), these figures fall to 441 and 417. With an average length of stay of 6.5 days, the number of required beds would be 342 and 366, respectively; deducting abandonment rates, 254 and 275. The Brazilian Ministry of Health establishes a parameter of 118 to 353 beds. Although the number of regulated beds is within the recommended range, an increase in beds of 122.0% is required to guarantee system stability and of 134.0% for a maximum waiting time of six hours. CONCLUSIONS Adequate bed estimation must consider reasons for limited timely access and patient flow management in a scenario that associates prioritization of requests with the lowest average length of stay.

Preliminary study on the production of functionally graded materials by friction stir processing

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Aplicação da metodologia Kaizen em gestão de armazém de peças

Mestrado em Engenharia Mecânica - Especialização em Gestão Industrial

Aplicação da Abordagem Kaizen Lean no Departamento de Logística no HGSA

O presente relatório de Dissertação surge no âmbito da unidade curricular Dissertação/Projeto/Estágio do 2º ano do Mestrado em Engenharia Mecânica – Ramo Gestão Industrial do Instituto Superior de Engenharia do Porto. O objetivo principal do projeto foi a aplicação das metodologias Kaizen-Lean no departamento de logística do Hospital Geral de Santo António, tendo em vista a melhoria contínua nestas duas áreas distintas: - gestão do produto farmacêutico, desde que é identificada a sua necessidade no armazém central até à reposição pelo fornecedor e respetiva distribuição e entrega nos serviços clínicos utilizadores. Aqui estão também incluídos os processos de negociação e encomenda. - gestão do serviço de transportes incluindo os transportes de doentes, produtos e profissionais de saúde. Este projeto surgiu no seguimento de projetos anteriores desenvolvidos pelo Kaizen Institute Portugal, empresa de consultoria de melhoria contínua, no Centro Hospitalar do Porto – Hospital Geral de Santo António. Durante o trabalho recorreu-se à aplicação de ferramentas Kaizen Lean nomeadamente metodologias e ferramentas associadas ao TFM – Total Flow Management e ao TSM – Total Service Management, ferramentas estas integradas no Kaizen Management System. De salientar também a aplicação do Kaizen Change Management, com uma componente muito forte de aplicação do Kaizen Diário. O resultado final da aplicação destas ferramentas resultou na concretização dos objectivos traçados que foram propostos. Tais como o desenvolvimento de uma cultura de melhoria contínua nas equipas de trabalho, organização dos postos de trabalho e redução dos stocks nos produtos farmacêuticos do Armazém de Produtos Farmacêuticos (APF).

Aplicação da abordagem KAIZEN na produção de artigos de papelaria

No âmbito da unidade curricular Tese/Dissertação do 2ºano do Mestrado em Engenharia Eletrotécnica – Ramo Sistemas e Planeamento Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho descreve o estágio curricular efetuado num projeto industrial de melhoria em parceria com o Kaizen Institute, uma empresa de consultoria operacional. Este projeto foi desenvolvido numa empresa de produção e redistribuição de artigos de papelaria e escritório, a Firmo AVS – Papeis e Papelaria,S.A.. O acordo efetuado entre o Kaizen Institute e a Firmo AVS foi o de promover e incutir a cultura da melhoria continua e da mudança de atitudes e comportamentos por parte dos colaboradores da Firmo, sendo que numa fase inicial o foco do projeto foi o departamento de produção de envelopes, designada por área piloto, expandindo-se posteriormente a metodologia Kaizen aos restantes departamentos. A realização deste projeto teve como objetivo a implementação de conceitos elementares de melhoria continua nomeadamente alguns pilares ou ferramentas do Total Flow Management (TFM) e do Kaizen Management System (KMS) na empresa Firmo, de forma a reduzir ou eliminar desperdícios, incremento do envolvimento dos colaboradores, melhoria da comunicação e trabalho em equipa, estandardização de processos produtivos, criação de normas de trabalho, utilização de ferramentas SMED para a redução de tempos improdutivos e aumento da produtividade. Várias foram as dificuldades presentes no terreno para a implementação destes objetivos mas com as diversas ferramentas e workshops realizados na organização, conseguiu-se o envolvimento de todos os colaboradores da organização e a obtenção de resultados satisfatórios nomeadamente ao nível da comunicação e trabalho em equipa, organização e limpeza dos postos de trabalho, standard work (normalização do trabalho), diminuição do lead time nos processos produtivos e consequente aumento de produtividade.

Production of aluminium based composites reinforced with embedded NiTi by friction stir welding

Dissertação para a obtenção do grau de Mestre em Engenharia Mecânica

Gestão de fluxos de pessoas num serviço hospitalar

Dissertação de mestrado em Engenharia Industrial (área de especialização em Gestão Industrial)

Simulationsbasierte Frühwarnsysteme zur Unterstützung der operativen Produktionssteuerung und -planung in der Automobilindustrie

Material flow simulation, Simulation-based Early Warning System, Discrete Event Simulation, Production Planning and Control, Automotive Industry, Forecast of Future System States, Monitoring Systems

Colombian international trade from a physical perspective: towards an ecologial "Prebisch Thesis"

Prebisch's approach to economic development was based on the notion that there is an international historical division of labour. Peripheral countries are specialized in exporting primary goods while centre countries export industrial goods. The Terms of trade for peripheral countries tend to deteriorate. This approach can be extendend to ecological issues. The international Centre-Periphery division does not only involve the monetary exchange of goods and capital, but also the physical exchange in which Southern countries provide materials and energy so that Northern countries can develop their socioconomic metabolism. This metabolism process is guaranteed through cheap prices for primary goods. This paper aims to apply and extend Prebisch's thought on unequal exchange, both monetary and ecological, in relation to colombian trade in the period 1970-2002, using material flow analysis.

12

This chapter discusses how the industrial ecological systems can help in dealing with environmental issues in developing countries, and it presents three case studies from India that highlight some of the unique environmental issues of developing world. Industrial ecology explores the assumption that the industrial system can be seen as a certain kind of ecosystem. The scope of industrial ecology goes well beyond waste exchange to the optimization of resources flowing through the economic system. Among the various specific aspects of developing countries, which have to be born in mind, is the fact that the pattern of resource flows in developing countries, and hence, the resultant environmental threat could be very different than what it is in the industrialized west. Typically, the flow of materials through the large, organized manufacturing facilities in the developing countries could be very small in relation to the overall material flow as the small, informal ?industry? plays a key role and forms a very significant portion of the economic activity. The case studies of the Tirupur textile industries, and the leather industry in India, illustrate how redefining the problem from a perspective of resource conservation, and on the basis of resource flow data could point to totally new directions for strategy planning. The case study of the Damodar Valley region amplifies the importance of looking beyond formal industry to solve an environmental problem. It shows that even for globally critical programs, such as climate change program in developing countries, it is just not enough to estimate the emissions from the formal industrial sectors.

Iron mining in Goa (India) : an interdisciplinary study

En aquest article es presenten breument els diferents capítols d’un treball interdisciplinari per tal d’entendre el context de prohibició de la mineria de ferro a Goa a finals del 2012 i proporcionar la informació necessària per tal d’orientar i gestionar la presa de decisions sobre l’activitat minera en un futur. Els sis primers capítols consisteixen en l’estudi del medi abiòtic, medi biòtic, fluxos de materials, aspectes socials, aspectes econòmics i finalment aspectes polítics. En canvi, en els dos últims capítols s'avaluen i es gestionen els impactes ambientals de la mineria mitjançant, per una banda, una anàlisi DPSIR i, d'altra banda, es proposen tres escenaris per integrar les diferents variables i fomentar la participació en la presa de decisions. S’ha dut a terme una extensa recerca mitjançant la recopilació de dades, entrevistes i visites a les zones d’estudi d’interès per tal d’entendre el conflicte de la mineria a Goa.

Report on theorerical results of power generation and conversion

Experimental results of a new controller able to support bidirectional power flow in a full-bridge rectifier with boost-like topology are obtained. The controller is computed using port Hamiltonian passivity techniques for a suitable generalized state space averaging truncation system, which transforms the control objectives, namely constant output voltage dc-bus and unity input power factor, into a regulation problem. Simulation results for the full system show the essential correctness of the simplifications introduced to obtain the controller, although some small experimental discrepancies point to several aspects that need further improvement.

Myymäläketjun hankintatoiminnan mittarit, Case Tiimari Oyj

Työn tavoitteena oli kehittää yritykselle selkeä ja toimiva hankintatoiminnan suorituskykymittaristo, jonka avulla tietojärjestelmien tuottama tietosaadaan hyötykäyttöön. Tavoitteena oli myös selvittää yrityksen hankintatoiminnan nykytila. Selvitys auttoi sopivien mittareiden valinnassa. Teoriaosassa käsiteltiin suorituskyvyn mittaamista hankintatoiminnassa, mittariston suunnittelua ja käyttöönoton vaiheita sekä erilaisia malliratkaisuja hankintatoiminnan suorituskyvyn mittaamiselle. Empiirisessä osassa perehdyttiin yrityksen hankintatoiminnan nykytilaan sekä rakennettiin teorian, nykytila-analyysin ja hankintahenkilökunnan näkemysten pohjalta suorituskykymittaristo yrityksen osto-osastolle. Hankintatoiminnan nykytilanteen arvioinnissa korostuivat parhaillaan tapahtuvat suuret muutokset. Suorituskykymittaristo laadittiin siten, että se kattaa tärkeimmät osa-alueet myymäläketjun hankintatoiminnassa. Työn tuloksena kehitetty mittaristo koostuu toimittaja-, valikoima-, materiaalivirta- sekä varastomittareista.