862 resultados para Least Square Method
Resumo:
Introduction: This work intents to characterize behavioral indicators of tack to the hemodialysis treatment in a sample of carrying patients of chronic kidney failure (CKF) in the great Natal/RN. The therapeutical adherence represents the agreement degree between the patient behavior and the health team lapsings. The CKF is the gradual and irreversible loss of the renal function, being the hemodialysis treatment an important alternative to assist or to substitute the kidneys. Method: The sample consisted in 80 chronic kidney patients in hemodialysis treatment in two located clinical centers in the region of the great Natal, RN. It was used as instruments (a) a protocol of clinical data collection, (b) the Millon Index of Personality Styles (MIPS) and (c) a script of halfstructuralized interview. Results: The results show a balance between the genders (51% of female and 48.8% of the male sex), average age and equal average time of dialysis respectively to the 43,4 years (±13,25 years) and 22,04 years (±4,24 years). The marital status of half of the sample is married, predominating basic education (43.6%) and a familiar income until a minimum wage (43.8%). It had been defined six physicianlaboratorial indicators to evaluate the therapeutical adherence, further the use of the evaluation of the health team and the patient themselves. Thus, there was an average adherence around 55.97% of the sample ±18.37%). However only between selfassessment of the patients about the adherence and the assessment made by blood pressure post-dialysis indicated a significant association (p=0,029, qui-square test). On the other hand, there was a significant association (p <0.05, chi-square test) among the criteria for treatment adherence and issues investigated in the interview - the perception on the quality of the health services provided to patients, the difficulties following the prescribed diet, the characterization of the days between dialysis sessions and the perception of patients about the dialysis sessions. It was also noted a significant association (p <0.05, Levene test) between adherence to therapy and scales that constitute the MIPS. The health team characterized the patients more adherent behavior as an attitude of acceptance of the treatment, looking actively for their implementation, for more information and knowledge, and establishing a positive communication with the team and with other patients. Similar results were confirmed by the MIPS evaluation. According to that assessment the more compliant patients adopt a more optimistic attitude, trying to act or adapt themselves to their environment, processing cognitively both concrete and objective information, such as more speculative and symbolic information. In addition they establish a gregarious, cooperative, submissive and flexibly pattern of interpersonal relationships to social demands. These characteristics managed to explain 55.7% of the adherence variation according the health team and 23.3% of the variation according the CaxP laboratory indicator. Conclusions: The MIPS shown to be able to identify the most and least adherent to therapy patients. The use of different adherence indicators is important for an evaluation covering the different facets of this process. The adhesion levels are observed within registered by the relevant literature. There is need for further studies with a larger sample to deepen the data findings in this work
Resumo:
This work is combined with the potential of the technique of near infrared spectroscopy - NIR and chemometrics order to determine the content of diclofenac tablets, without destruction of the sample, to which was used as the reference method, ultraviolet spectroscopy, which is one of the official methods. In the construction of multivariate calibration models has been studied several types of pre-processing of NIR spectral data, such as scatter correction, first derivative. The regression method used in the construction of calibration models is the PLS (partial least squares) using NIR spectroscopic data of a set of 90 tablets were divided into two sets (calibration and prediction). 54 were used in the calibration samples and the prediction was used 36, since the calibration method used was crossvalidation method (full cross-validation) that eliminates the need for a validation set. The evaluation of the models was done by observing the values of correlation coefficient R 2 and RMSEC mean square error (calibration error) and RMSEP (forecast error). As the forecast values estimated for the remaining 36 samples, which the results were consistent with the values obtained by UV spectroscopy
Resumo:
The aim of this study was to evaluate the potential of near-infrared reflectance spectroscopy (NIRS) as a rapid and non-destructive method to determine the soluble solid content (SSC), pH and titratable acidity of intact plums. Samples of plum with a total solids content ranging from 5.7 to 15%, pH from 2.72 to 3.84 and titratable acidity from 0.88 a 3.6% were collected from supermarkets in Natal-Brazil, and NIR spectra were acquired in the 714 2500 nm range. A comparison of several multivariate calibration techniques with respect to several pre-processing data and variable selection algorithms, such as interval Partial Least Squares (iPLS), genetic algorithm (GA), successive projections algorithm (SPA) and ordered predictors selection (OPS), was performed. Validation models for SSC, pH and titratable acidity had a coefficient of correlation (R) of 0.95 0.90 and 0.80, as well as a root mean square error of prediction (RMSEP) of 0.45ºBrix, 0.07 and 0.40%, respectively. From these results, it can be concluded that NIR spectroscopy can be used as a non-destructive alternative for measuring the SSC, pH and titratable acidity in plums
Resumo:
Objective. To assess the expression of TRAIL-R3 and the methylation of a CpG island within the TRAIL-R3 promoter both in cystadenoma tumors and primary and metastatic epithelial ovarian carcinoma (EOC).Methods. RNA was obtained from women with normal ovarian (NO) tissues (n = 18), ovarian serous cystadenoma tumors (n = 11) and EOC (n = 16) using Trizol (R). Quantitative PCR (gRT-PCR) was performed to quantify the relative levels of TRAIL-R3. The methylation frequency of the CpG island in the TRAIL-R3 promoter was assessed using the methylation-specific PCR (MSP) assay after DNA bisulfite conversion. The differences between the groups were evaluated using the chi-square, Student's t, ANOVA, Mann-Whitney U, Wilcoxon or Kruskal-Wallis tests as indicated. The survival rates were calculated using the Kaplan-Meier method.Results. Cystadenoma and metastatic EOC tumors expressed significantly more TRAIL-R3 mRNA than primary EOC tumors. Methylation of the TRAIL-R3 promoter was absent in NO tissues, while hemimethylation of the TRAIL-R3 promoter was frequently found in the neoplasia samples with 45.4% of the cystadenoma tumors, 8.3% of the primary EOC samples and 11.1% of the metastatic EOC samples showing at least partial methylation (p = 0.018). Neither the expression of TRAIL-R3 nor alterations in the methylation profile were associated to cumulative progression-free survival or the overall survival in EOC patients.Conclusions. Primary EOC is associated to a lower TRAIL-R3 expression, which leads to a better understanding of the complex disease and highlighting potential therapeutic targets. Promoter DNA methylation was not related to this finding, suggesting the presence of other mechanisms to transcriptional control. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Ferroelectric SrBi4Ti4O15 thin films were successfully prepared on a Pt(111)/Ti/SiO2/Si(100) substrate for the first time by spin coating, using the polymeric precursor method. X-ray diffraction patterns of the films indicate that they are polycrystalline in nature. Atomic force microscopy (AFM) analyses showed that the surface of these films is smooth, dense and crack-free with low surface roughness (6.4 nm). At room temperature and at a frequency of 1 MHz, the dielectric constant and the dissipation factor were, respectively, 150 and 0.022. The C-V characteristics of perovskite thin film prepared at low temperature show normal ferrolectric behaviour. The remanent polarization and coercive field for the films deposited were 5.4 mu C/cm(2) and 8 5 kV/cm, respectively. All the capacitors showed good polarization fatigue characteristics at least up to 1 x 10(10) bipolar pulse cycles indicating that SrBi4Ti4O15 thin films can be a promising material for use in nonvolatile memories. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn in plant tissues by high-resolution continuum source flame atomic absorption spectrometry is proposed. For this, the main lines for Cu (324.754 nm), Fe (248.327 nm), Mn (279.482 nm) and Zn (213.857 nm) were selected, and the secondary lines for Ca (239.856 nm), Mg (202.582 nm) and K (404.414 nm) were evaluated. The side pixel registration approach was studied to reduce sensitivity and extend the linear working range for Mg by measuring at wings (202.576 nm; 202.577 nm; 202.578 nm; 202.580 nm: 202.585 nm; 202.586 nm: 202.587 nm; 202.588 nm) of the secondary line. The interference caused by NO bands on Zn at 213.857 nm was removed using the least-squares background correction. Using the main lines for Cu, Fe, Mn and Zn, secondary lines for Ca and K, and line wing at 202.588 nm for Mg, and 5 mL min(-1) sample flow-rate, calibration curves in the 0.1-0.5 mg L-1 Cu, 0.5-4.0 mg L-1 Fe, 0.5-4.0 mg L-1 Mn, 0.2-1.0 mg L-1 Zn, 10.0-100.0 mg L-1 Ca, 5.0-40.0 mg L-1 Mg and 50.0-250.0 mg L-1 K ranges were consistently obtained. Accuracy and precision were evaluated after analysis of five plant standard reference materials. Results were in agreement at a 95% confidence level (paired t-test) with certified values. The proposed method was applied to digests of sugar-cane leaves and results were close to those obtained by line-source flame atomic absorption spectrometry. Recoveries of Ca, Mg, K, Cu, Fe, Mn and Zn in the 89-103%, 84-107%, 87-103%, 85-105%, 92-106%, 91-114%, 96-114% intervals, respectively, were obtained. The limits of detection were 0.6 mg L-1 Ca, 0.4 mg L-1 Mg, 0.4 mg L-1 K, 7.7 mu g L-1 Cu, 7.7 mu g L-1 Fe, 1.5 mu g L-1 Mn and 5.9 mu g L-1 Zn. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A sensitive method based on square wave voltammetry is described for the quantitative determination of elemental sulfur, disulfide and mercaptan in gasoline using a mercury film electrode. These sulfur compounds can be quantified by direct dissolution of gasoline in a supporting electrolyte followed by subsequent voltammetric measurement. The supporting electrolyte is 1.4 mol L-1 sodium acetate and No acetic acid in methanol. Chemical and optimum operational conditions for the formation of the mercury film were analyzed in this study. The values obtained were a 4.3 mu m thickness for the mercury film, a 1000 rpm rotation frequency, -0.9 V applied potential and 600 s depositing time. Voltammetric measurements were obtained using square wave voltammetry with detection limits of the 3.0 x 10(-9), 1.6 x 10(-7) and 4.9 x 10(-7) mol L-1 for elemental sulfur, disulfide and mercaptan, respectively. (C) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
In this work, GdAlO3:RE3+ (RE = Eu or Tb) was successfully prepared by the Pechini method at lower temperatures when compared to others methods as solid-state synthesis and sol-gel process. In accordance to the XRD data, the fully crystalline single-phase GdAlO3 could be obtained at 900 degrees C. The differential thermal analysis (DTA) shows a crystallization peak at 850 degrees C. The samples are composed by monocrystalline particles (50-120 nm) exhibiting the formation of aggregates among them, which indicates the beginning of the sinterization process. This feature indicates a strong tendency to the formation of aggregates, which is a suitable ability for the close-packing of particles, and hence a potential application in X-ray intensifying screens. Luminescence measurements indicate Gd3+ -> RE3+ energy transfer. The Eu3+ emission spectra exhibit all the characteristics D-5(0) -> F-7(j) transitions and the observed profile suggests that RE3+ ions occupy at least one site without center of symmetry. For terbium-doped samples, the D-5(3) -> F-7(j) (blue emission) and D-5(4) -> F-7(j) (green emission) transitions were observed and the ratio between them may depend on the Tb3+ content due to cross-relaxation processes. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
Ferroelectric CaBi4Ti4O15 (CBTi144) thin films were deposited on Pt/Ti/SiO2/Si substrates by the polymeric precursor method. The films present a single phase of layered-structured perovskite with polar axis orientation after annealing at 700 degrees C for 2 h in static air and oxygen atmosphere. The a/b-axis orientation of the ferroelectric film is considered to be associated with the preferred orientation of the Pt bottom electrode. It is noted that the films annealed in static air showed good polarization fatigue characteristics at least up to 10(10) bipolar pulse cycles and excellent retention properties up to 10(4) s. on the other hand, oxygen atmosphere seems to be crucial in the decrease of both, fatigue and retention characteristics of the capacitors. Independently of the applied electric field, the retained switchable polarization approached a nearly steady-state value after a retention time of 10 s. (C) 2006 Elsevier B.V. All rights reserved.
Resumo:
Two cases treated for hypertrophy of the frontal sinus are presented. In both patients, the excised frontal bone was inverted, and the resultant cavity was filled with either bone dust from the parietal region or Medpor. The first patient is shown with an excellent result after a follow-up period of 16 years. The second patient, who also achieved an excellent result, is presented after a follow-up period of 5 years. Using Medpor instead of bone dust resulted in the advantage that the operation could be performed with the patient under local anesthesia with sedation and prevention of an additional donor site. The use of Medpor has certain advantages over the use of hydroxyapatite, not least of which is its significant lower cost.