Production Cycle Optimization: Defining the Market Potential for a New Planning Tool

An optimization tool has been developed to help companies to optimize their production cycles and thus improve their overall supply chain management processes. The application combines the functionality that traditional APS (Advanced Planning System) and ARP (Automatic Replenishment Program) systems provide into one optimization run. A qualitative study was organized to investigate opportunities to expand the product’s market base. Twelve personal interviews were conducted and the results were collected in industry specific production planning analyses. Five process industries were analyzed to identify the product’s suitability to each industry sector and the most important product development areas. Based on the research the paper and the plastic film industries remain the most potential industry sectors at this point. To be successful in other industry sectors some product enhancements would be required, including capabilities to optimize multiple sequential and parallel production cycles, handle sequencing of complex finishing operations and to include master planning capabilities to support overall supply chain optimization. In product sales and marketing processes the key to success is to find and reach the people who are involved directly with the problems that the optimization tool can help to solve.

Specificity and selectivity improvement in doping analysis using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry was used for the identification of forty doping agents. The improvement in the specificity was remarkable, allowing the resolution of analytes that could not be done by one-dimensional chromatographic systems. The sensitivity observed for different classes of prohibited substances was clearly below the value required by the World Anti-Doping Agency. In addition time-of-flight mass spectrometry gives full spectrum for all analytes without any interference from the matrix, resulting in selectivity improvements. These results could support the implementation of an exhaustive monitoring approach for hundreds of doping agents in a single injection.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Considering Target Groups in the Creation of a Comprehensive City Branding Process

The aim of the research was to create a comprehensive city branding process. This was done by identifying the key target groups of the city and considering them in the city branding process. Also key stakeholders were identified and taken into consideration when creating the branding process. As an empirical study, three first stages of the city branding process were implemented for the city of Lappeenranta having "students" as the case target group. An interview with the city officials was conducted, as well as a student survey on the current city image of Lappeenranta. Quantitative research methods were used to analyze the results of the survey. A comprehensive city branding process with eight stages was created in the research. Target groups were considered in the process by identifying the target group dependent stages. The empirical study revealed that the current city image held by the students consists of six dimensions. These dimensions were analyzed from the viewpoint of Lappeenranta with the help of an importance performance analysis.

Osingonjakopäätökset pienissä osakeyhtiöissä. Empiirinen tutkimus osakeyhtiölain varojenjakosäännösten toteutumisesta

Tässä väitöstutkimuksessa tarkastellaan Suomen osakeyhtiölain pakottavien varojenjakosäännösten vaikutusta osingonjakopaatoksiin. Lain vaikutuksen seuraamisen lisäksi pyritään muodostamaan kokonaiskuva tekijöistä, jotka vaikuttavat pienissä yhtiöissä tehtäviin osingonjakopäätöksiin. Väitöskirja koostuu kahdesta eri osasta. Ensimmäisessä osassa osoitetaan, kuinka toisen osan artikkelit muodostavat kokonaisuuden ja esitellään tutkimustulokset. Väitöskirjan toinen osa koostuu neljästä toisiaan täydentävästä artikkelista. Tutkimus etenee julkaisujen myötä ensin maksukykytestin määrittelystä maksukykytestiin liittyviin oikeudellisiin ongelmiin sekä tilinpaatoksen merkitykseen osingonjakopäätöksissä, siirtyen sitten omistaja johtajan tarpeisiin ja tavoitteisiin, päättyen lopuksi velkojan näkökulmaan. Tutkimuksen tavoitteeksi asetettiin kokonaiskuvan muodostaminen niistä tekijöistä, jotka vaikuttavat osingonjakopäätöksen tekemiseen pienissä osakeyhtiöissä. Tavoitteena oli myös selvittää kuinka osakeyhtiölain 13 luvun varojenjakosäännökset otetaan huomioon osingonjakopäätöstä tehtäessä. Tutkimusaineistona käytettiin sekä kyselytutkimusaineistoa että tilinpäätöstietoja. Aineistoa analysoitiin kvantitatiivisin menetelmin. Tutkimusaineistosta löydettiin kolme erilaista varallisuuden siirtämisen strategiaa. Ne nimettiin seuraavasti: tulojen maksimointi, verosuunnittelu, palkan jousto. Tutkimuksesta nousee esiin kolme keskeistä tulosta. Ensinnäkin, liiketaloustieteellinen maksukyvyn merkitys poikkeaa oikeustieteessä käsitetystä maksukyvystä. Toiseksi, osakeyhtiölain 13 luvun varojenjakosäännökset tulee ottaa huomioon sekä osingonjakopäätöstä tehtäessä että varojen tosiasiallisesti siirtyessä pois yhtiön vaikutuspiiristä. Kolmanneksi, pääomatuloverotuksen kiristyessä omistaja johtaja saattaa siirtää varallisuutta yhtiöstä yksityistalouteen osingon sijasta palkkana. Tämän seurauksena maksukykytestin merkitys vähenee erityisesti pienissä yhtiöissä. Tulosten perusteella tasetesti näyttää olevan pienissä yhtiöissä maksukykytestiä merkityksellisempi.

In pursuit of an intercultural dimension in EFL-teaching : exploring cognitions among Finland-Swedish comprehensive school teachers

This thesis is about the educational purpose of foreign language teaching (FLT) in an increasingly internationalised world.The past 20-30 years have witnessed a fundamental rethinking of the aims of FLT, entailing a shift in emphasis from linguistic competence over communicative competence to intercultural competence. The growing emphasis on cultural issues, called for by research and international curricular documents, places new demandson language teachers. The overall aim of this study is to deepen the knowledge about the attitudes of teachers at the upper level of the Finland-Swedish comprehensive school towards the treatment of culture in English foreign language (EFL) teaching. The questions in focus are: 1) How do teachers interpret the concept"culture" in EFL-teaching?, 2) How do they specify the cultural objectives of their teaching? and 3) What do they do to attain these objectives? The thesis strives to reveal whether or not language teaching today can be describedas intercultural, in the sense that culture is taught with the aim of promotingintercultural understanding, tolerance and empathy. This abductive and largely exploratory study is placed within a constructivist and sociocultural framework,and is inspired by both phenomenography and hermeneutics. It takes its starting-point in language didactics, and can also be regarded as a contribution to teacher cognition research. The empirical data consists of verbatim transcribed interviews with 13 Finland-Swedish teachers of English at grades 7-9. The findings are presented according to three orientations and reviewed with reference to the 2004 Finnish National Framework Curriculum. Within the cognitive orientation, "culture" is perceived as factual knowledge, and the teaching of cultureis defined in terms of the transmission of knowledge, especially about Britain and the USA (Pedagogy of Information). Within the action-related orientation, "culture" is seen as skills of a social and socio-linguistic nature, andthe teaching aims at preparing the students for contacts with people from the target language areas (Pedagogy of Preparation). Within the affective orientation, which takes a more holistic approach, "culture" is seen as a bi-directional perspective. Students are encouraged to look at their own familiar culture from another perspective, and learn to empathise with and show respect for otherness in general, not just concerning representatives of English-speaking countries (Pedagogy of Encounter). Very few of the interviewed teachers represent the third approach, which is the one that can be characterised as truly intercultural. The study indicates that many teachers feel unsure about how to teach culture in an appropriate and up-to-date manner. This is attributed to, among other things, lack of teacher insights as well as lack of time and adequate material. The thesis ends with a set of recommendations as to how EFL could be developed ina more intercultural direction.

Under ytan, vid ytan och ovanför ytan : analys av tanken bakom tre läromedel i slöjd

This thesis is based on the personal experience gained related to the planning and production of three web-based teaching materials for the teaching subject knownas sloyd at the comprehensive school in Finland. After the teaching materials had been produced and published on the Internet at the Finnish textile teachers' website KässäBoxi, the idea for this thesis emanated from the questions: Why do the three teaching materials look the way they do and why do other textile teachers comment that they are different? In earlier sloyd educational research it has been stated that a scientific paradigm affects the individual ideology of a sloyd teacher. The aimfor my doctoral thesis is to continue on the topic. As the area of interest comprises the thought behind three teaching materials in sloyd, the aim of the thesis is to show how teaching and educational ideologies in sloyd appear in the teaching materials at hand. The research approach has parallels to research about another, tangible phenomena, namely the iceberg. In a similar way as an iceberg, a teaching material has a profound base, but the base is not always completely visible to the user of the teaching material. In this thesis I strive to show what there is under the surface, on the surface and above the surface of three teaching materials in sloyd. The research approach is defined as qualitative and phenomenologic-hermeneutic. The analysis results in knowledge about how the producer of a teaching material affects the character of a teaching material by choices concerning for example the form, structure, language and illustrations of the teaching material. The analysis also shows how the producers' individual educational and teaching ideologies within the teaching subject at hand appear by means of traces concerning the view on the pupil and the teacher, and the view on planning and conducting teaching in sloyd. The thesis also results in knowledge about how sloyd educational scientific theories and demands from society, as they are stated in the national core curriculum, appear in the three teaching materials. The application of the sloyd educational scientific theory of individual sloyd activity as a holistic educative system is also widened in the thesis. This thesis contributes to future research on producing teaching materials by information about what aspects a producer of teaching materials needs to consider and how the aspects become visible in the teaching materials. This kind of knowledge is valuable to teacher students in sloyd, to teachers in sloyd who intend to plan and produce teaching materials and to teachers who tutor the planning and production of teaching materials.

Researching Manufacturing Planning and Control system and Master Scheduling in a manufacturing firm.

The objective of this thesis is to research Manufacturing Planning and Control (MPC) system and Master Scheduling (MS) in a manufacturing firm. The study is conducted at Ensto Finland Corporation, which operates on a field of electrical systems and supplies. The paper consists of theoretical and empirical parts. The empirical part is based on weekly operating at Ensto and includes inter-firm material analysis, learning and meetings. Master Scheduling is an important module of an MPC system, since it is beneficial on transforming strategic production plans based on demand forecasting into operational schedules. Furthermore, capacity planning tools can remarkably contribute to production planning: by Rough-Cut Capacity Planning (RCCP) tool, a MS plan can be critically analyzed in terms of available key resources in real manufacturing environment. Currently, there are remarkable inefficiencies when it comes to Ensto’s practices: the system is not able to take into consideration seasonal demand and react on market changes on time; This can cause significant lost sales. However, these inefficiencies could be eliminated through the appropriate utilization of MS and RCCP tools. To utilize MS and RCCP tools in Ensto’s production environment, further testing in real production environment is required. Moreover, data accuracy, appropriate commitment to adapting and learning the new tools, and continuous developing of functions closely related to MS, such as sales forecasting, need to be ensured.

Harvesting and wood transport planning with SNAP III program (Scheduling and Network Analysis Program) in a pine plantation in Southeast Brazil

The objective of this study was to verify the potential of SNAP III (Scheduling and Network Analysis Program) as a support tool for harvesting and wood transport planning in Brazil harvesting subsystem definition and establishment of a compatible route were assessed. Initially, machine operational and production costs were determined in seven subsystems for the study area, and quality indexes, construction and maintenance costs of forest roads were obtained and used as SNAP III program input data. The results showed, that three categories of forest road occurrence were observed in the study area: main, secondary and tertiary which, based on quality index, allowed a medium vehicle speed of about 41, 30 and 24 km/hours and a construction cost of about US$ 5,084.30, US$ 2,275.28 and US$ 1,650.00/km, respectively. The SNAP III program used as a support tool for the planning, was found to have a high potential tool in the harvesting and wood transport planning. The program was capable of defining efficiently, the harvesting subsystem on technical and economical basis, the best wood transport route and the forest road to be used in each period of the horizon planning.

Suomen ja Viron tehtaiden välisen uistinliiketoiminnan suorituskyvyn ja kannattavuuden kasvattaminen

Tämän tutkimuksen tavoitteena oli selvittää Päijät-Hämeessä toimivan uistimia valmistavan tehdasyksikön sekä saman konsernin Virossa toimivan tehdasyksikön välisen uistinliiketoiminnan kannattavuuden ja suorituskyvyn mahdollinen kasvattaminen. Konsernilla on käytössään kannattavan kasvun strategia, johon tämäkin yksi liiketoiminnan kehittämishankekin omalta osaltaan myös tähtää. Kannattavuutta tarkasteltiin tehtaiden välisen päätoimialan ja sen tuottavuuden ja suorituskyvyn näkökulmasta. Työssä on lähdetty rakentamaan tehtaiden väliselle uistinliiketoiminnalle uudenlaista mittaristoa operationaalisen johdon käyttöön. Suorituskykymittaristossa otetaan huomioon suunnittelutiimin avulla määritellyt avainmittarien osa-alueet ja niiden kehittäminen tulevaisuudessa. Työ käsittelee myös hieman toimipisteissä tapahtuvan muutosten hallitsemista sekä kehittävän ilmapiirin kasvattamista. Tässä tutkimuksessa havaittiin, että suorituskyvyn mittaamisesta oli hyötyä niin operationaaliselle toimipaikkakohtaiselle johdolle kuin tuotannon työntekijällekin. Tehtaiden välisestä suorituskyvystä saatiin vertailevaa tietoa, jota voidaan käyttää hyödyksi tulevaisuudessa. Tulevaisuudessa tästä järjestelmästä saatava tieto helpottaa tuotantolaitoksissa tapahtuvaa työvaiheiden kokonaisvaltaista prosessointia josta kuitenkin pitkällä tähtäimellä suurimmat kustannussäästöt tulevat yritykselle.

Perspectives for the production and usage of wood chips as a source of energy in the North-West of Russia

The development of bioenergy on the basis of wood fuels has received considerable attention in the last decades. The combination of large forest resources and reliance on fossil fuels makes the issue of wood chips usage in Russia an actual topic for the analysis. The main objective of this study is to disclose the current state and perspectives for the production of wood chips and their usage as a source of energy in the North-West of Russia. The study utilizes an integrated approach to explore the market of wood chips on the basis of comprehensive analysis of documentation and expert opinions. The analysis of wood chips market was performed for eight regions of the North-West district of Russia within two major dimensions: its current state and perspectives in the nearest five years. The results of the study show a comprehensive picture of the wood chips market, including the potential for wood chips production, the specific features of production and consumption and the perspectives for the market development within the regions of the North-West district of Russia. The study demonstrated that the market of wood chips is underdeveloped in the North-West of Russia. The findings of the work may be used by forest companies for the strategic planning.