Emergency Management in the United States of America

Core capabilities are under the above mission areas as outlined in the National Preparedness Goal. Planning, Public Information and Warning, and Operational Coordination cut across all five mission areas. Without these three cross-cutting capabilities, the other capabilities might not be achieved or could be weakened. Other core capabilities are aligned under a specific mission area, based on where it had the most relevance. Core capabilities alignment: Prevention capabilities focus on things related to preventing an imminent terrorist attack; by imminent, we mean an attack that is about to happen ; Protection capabilities focus on security— making sure things, systems, and people are protected ; Mitigation capabilities focus on risk, resilience and building a culture of preparedness; Response capabilities focus on meeting a community’s immediate needs when disaster strikes and finally, recovery capabilities focus on getting communities back on their feet.

Performance Evaluation and Calibration of Machine Vision Measurement

This thesis presents the calibration and comparison of two systems, a machine vision system that uses 3 channel RGB images and a line scanning spectral system. Calibration. is the process of checking and adjusting the accuracy of a measuring instrument by comparing it with standards. For the RGB system self-calibrating methods for finding various parameters of the imaging device were developed. Color calibration was done and the colors produced by the system were compared to the known colors values of the target. Software drivers for the Sony Robot were also developed and a mechanical part to connect a camera to the robot was also designed. For the line scanning spectral system, methods for the calibrating the alignment of the system and the measurement of the dimensions of the line scanned by the system were developed. Color calibration of the spectral system is also presented.

Taloushallinnon toimintatapojen ja laskentajärjestelmien integroiminen perustajarakennuttamisprosessiin

Työn tavoitteena on tuottaa kehitysehdotuksia kohdeyrityksen perustajarakennuttamisprosessiin. Toiminnan tarkastelun painopiste on taloushallinnossa ja tietojärjestelmissä. Prosessin analysoimisessa hyödynnetään liiketoimintaprosessikuvausta, jossa eritellään yksilöiden sekä järjestelmien toimintaa. Työn teoriaosuudessa tarkastellaan prosesseja ja niiden kuvaamista, talousohjausta sekä rakennuttamisliiketoimintaa yleisesti. Synteesiosuudessa prosessin kulku analysoidaan. Prosessin tarkastelussa keskitytään prosessin sopimusvaiheeseen sekä taloushallinnon ja tietojärjestelmien toteutukseen. Analyysin perusteella esitetään toiminnan keskeiset ongelmakohdat. Toiminnan ongelmat jakautuvat kolmelle tasolle: operatiiviseen toimintaan, taloushallinnon toteutukseen sekä tietojärjestelmäratkaisuihin. Operatiivisella tasolla ongelmat liittyvät yksilöiden toimintaan ja taloushallinnossa etenkin kustannusten kohdistamiseen. Tietojärjestelmien avulla yhdistetään operatiivinen ja taloushallinnollinen taso toisiinsa. Työssä esitettyjen ratkaisuehdotusten avulla kohdeyritys voi kehittää prosessia kokonaisuutena.

A monolithic glass chip for active single-cell sorting based on mechanical phenotyping

The mechanical properties of biological cells have long been considered as inherent markers of biological function and disease. However, the screening and active sorting of heterogeneous populations based on serial single-cell mechanical measurements has not been demonstrated. Here we present a novel monolithic glass chip for combined fluorescence detection and mechanical phenotyping using an optical stretcher. A new design and manufacturing process, involving the bonding of two asymmetrically etched glass plates, combines exact optical fiber alignment, low laser damage threshold and high imaging quality with the possibility of several microfluidic inlet and outlet channels. We show the utility of such a custombuilt optical stretcher glass chip by measuring and sorting single cells in a heterogeneous population based on their different mechanical properties and verify sorting accuracy by simultaneous fluorescence detection. This offers new possibilities of exact characterization and sorting of small populations based on rheological properties for biological and biomedical applications.

THE APPLICATION OF AUTOMATED CORRELATION OPTIMIZED WARPING TO THE QUALITY EVALUATION OF Radix Puerariae thomsonii: CORRECTING RETENTION TIME SHIFT IN THE CHROMATOGRAPHIC FINGERPRINTS

The application of automated correlation optimized warping (ACOW) to the correction of retention time shift in the chromatographic fingerprints of Radix Puerariae thomsonii (RPT) was investigated. Twenty-seven samples were extracted from 9 batches of RPT products. The fingerprints of the 27 samples were established by the HPLC method. Because there is a retention time shift in the established fingerprints, the quality of these samples cannot be correctly evaluated by using similarity estimation and principal component analysis (PCA). Thus, the ACOW method was used to align these fingerprints. In the ACOW procedure, the warping parameters, which have a significant influence on the alignment result, were optimized by an automated algorithm. After correcting the retention time shift, the quality of these RPT samples was correctly evaluated by similarity estimation and PCA. It is demonstrated that ACOW is a practical method for aligning the chromatographic fingerprints of RPT. The combination of ACOW, similarity estimation, and PCA is shown to be a promising method for evaluating the quality of Traditional Chinese Medicine.

Tomato chlorotic spot virus in hydroponically-grown lettuce in São Paulo State, Brazil

In the regions of Campinas and Sumaré, São Paulo, Brazil, hidroponically grown crops of Lettuce (Lactuca sativa) cv. Verônica, which showed virus-like symptoms were examined by electron microscope, biological, serological and molecular tests. Pleomorphic, enveloped particles (80-100 nm in diameter) were always detected in these samples. Experimentally inoculated host plants, including lettuce, reacted with tospoviruses-induced symptoms. Some differences were observed in Gomphrena globosa, which reacted by showing local lesions and systemic mosaic. Two isolates of Tomato chlorotic spot virus (TCSV) were identified by DAS-ELISA and by RT-PCR. The sequencing and alignment of the RT-PCR coat protein amplified fragments have indicated a high degree of homology with the TCSV sequences stored in the GenBank. This is the first report of losses due to a virus from the genus Tospovirus in commercial hydroponic lettuce crops in Brazil. Further epidemiological studies are needed for better understanding the spread of the virus in hydroponic crops, since Tomato spotted wilt virus (TSWV) is reported to spread through the nutritive solution.

Strategic Orientation of Knowledge Management: Influence on Company's Performance

Nowadays, the huge part of the most important research is done in the area of interaction of two or more fields of research. They open doors for new ideas and help to find that was not possible to find before, explain simple things, which was missed because of narrow vision. This research investigates the interconnection of strategy study and knowledge management. Well-known researches (e.g. Michael Zack, 2003) point out that organization should align its' knowledge management to strategy to gain success. But this is not well developed area yet. This research contributes to the growing knowledge of knowledge management - strategy alignment. The research tests the relation between strategic orientation of knowledge management and performance of the company. It also investigates the nature of strategy typology influence on strategic orientation of knowledge management. These two points have critical importance for development of this area. Moreover, it has management implication for those practitioners, who cares about sustainable success of their company based on knowledge.

Cultural aspects of globalizing university-industry knowledge interaction in China

Previous studies of the local involvement of multinational corporation (MNC) subsidiaries focus on host-country firms and local business partners such as suppliers and customers. The role of host-country universities in the same context of innovation networks is neglected. Furthermore, there are many organizational culture- and knowledge-related differences between universities and companies, and this is likely to pose additional challenges for successful collaboration. Early university-industry (U-I) studies have primarily been limited within a national boundary, being concerned with a single level of culture (i.e., at an organizational level) and one-way knowledge transfer from university to industry. Research on more dynamic knowledge interaction in multinational settings is lacking. This is particularly true in the business context of China. In today’s globalizing and rapidly changing organizations, addressing cultural differences and clashes is an everyday reality, and inter-cultural U-I collaboration is becoming a key asset for gaining global competitiveness. This study deals with Finnish MNC subsidiaries’ research collaboration with Chinese universities. It aims to explore the essence of such U-I collaboration and knowledge interaction, uncovering the deep functioning mechanisms of culture underlying effective collaborative knowledge creation and innovation. The study reviews critically different bodies of literature including knowledge management theories and studies, U-I collaboration and knowledge interaction, and cross-cultural research in terms of organizational knowledge generation and utilization. It adopts a case study strategy with qualitative research methods, and data is collected through in-depth interviews and participant observation. The study presents the following major findings: 1. In the light of a comprehensive analysis of U-I collaboration, an effective matching strategy is proposed, in the assumption that good alignment of knowledge interaction strategies and approaches with their corresponding knowledge type, capability development and research task may greatly enhance the effectiveness of cross-cultural U-I collaboration and knowledge interaction. 2. It is proposed that in the Chinese MNC context more dynamic types of knowledge interaction like knowledge co-creation should be of key concern particularly when dealing simultaneously with multi-disciplinary applied research of human factors and technologies. U-I knowledge interaction, otherwise, pays attention only to the study of one-way technology and knowledge transfer. 3. It is posited that the influence of culture on collaborative knowledge interaction can be studied in a valuable way when knowledge-related variables are simultaneously taken into account. A systematic analysis of the role of knowledge in cross-cultural knowledge interaction could best be approached from multi-aspects of knowledge including not only nature, characteristics and types of knowledge but also the process of knowledge (e.g., intensifications of knowledge interaction). 4. The study demonstrates the significant role of aspects of the host-country culture (e.g., Chinese guanxi) in U-I collaboration and knowledge interaction. This is evident, for instance, in issues related to interpersonal relationships and trust, true interest and the relatedness of the research, mutual commitment and learning, communication intensity and interaction, and awareness of cultural and knowledge-related differences between collaboration partners. Theoretical and practical implications of the findings are suggested and discussed.

Komposiittien käyttö tämän päivän koneenrakennuksessa

Komposiitit ovat yhdistelmämateriaaleja, jotka koostuvat kahdesta tai useammasta eri materiaalista. Komposiitit ovat kiinnostavia tämän päivän koneenrakennukselle niiden korkean vahvuuden ja jäykkyyden suhteesta niiden kevyeeseen painoon nähden. Kuitulujitteisten komposiittien ja laminaattien valmistukseen on monia eri menetelmiä ja ne eroavat toisistaan lähinnä hartsin levittämistapojen sekä kuitujen asettelutapojen perusteella. Komposiittien työstäminen on vaikeaa, mikä johtuu niiden epähomogeenisesta ja anistrooppisesta laadusta ja komposiittien sisältävien lujitteiden korkeasta abrasiivisesta vaikutuksesta. Tavanomaisia työstömenetelmiä, kuten sorvausta, porausta ja jyrsimistä käytetään komposiittien työstämiseen. Kuitujen suuntaus komposiiteissa vaikuttaa paljon niiden työstämiseen. Ultraäänisen tärinän käyttäminen kuitulujitteisia komposiitteja sorvattaessa parantaa työstetyn kappaleen pinnanlaatua. Komposiittimateriaalien kiinnittäminen metalleihin eroaa selvästi muiden materiaalien kiinnittämisestä. Komposiittien yhdistämisen yhteydessä on otettava huomioon monia eri asioita, kiinnitysreikien valmistuksesta käytettäviin kiinnikkeisiin. Komposiittien kierrätys ja hävittäminen on tärkeä osa niiden elinkaarta, eikä niiden kierrätykseen ole tällä hetkellä hyviä ja kustannustehokkaita kierrätysmenetelmiä. Tällä hetkellä kierrättäminen tuleekin kalliimmaksi, kuin käytettyjen komposiittien vieminen kaatopaikalle.

Making Sense of Shared Leadership. A case study of leadership processes and practices without formal leadership structure in the team context

Leadership is essential for the effectiveness of the teams and organizations they are part of. The challenges facing organizations today require an exhaustive review of the strategic role of leadership. In this context, it is necessary to explore new types of leadership capable of providing an effective response to new needs. The presentday situations, characterized by complexity and ambiguity, make it difficult for an external leader to perform all leadership functions successfully. Likewise, knowledge-based work requires providing professional groups with sufficient autonomy to perform leadership functions. This study focuses on shared leadership in the team context. Shared leadership is seen as an emergent team property resulting from the distribution of leadership influence across multiple team members. Shared leadership entails sharing power and influence broadly among the team members rather than centralizing it in the hands of a single individual who acts in the clear role of a leader. By identifying the team itself as a key source of influence, this study points to the relational nature of leadership as a social construct where leadership is seen as social process of relating processes that are co-constructed by several team members. Based on recent theoretical developments concerned with relational, practice-based and constructionist approaches to the study of leadership processes, this thesis proposes the study of leadership interactions, working processes and practices to focus on the construction of direction, alignment and commitment. During the research process, critical events, activities, working processes and practices of a case team have been examined and analyzed with the grounded theory –approach in the terms of shared leadership. There are a variety of components to this complex process and a multitude of factors that may influence the development of shared leadership. The study suggests that the development process of shared leadership is a common sense -making process and consists of four overlapping dimensions (individual, social, structural, and developmental) to work with as a team. For shared leadership to emerge, the members of the team must offer leadership services, and the team as a whole must be willing to rely on leadership by multiple team members. For these individual and collective behaviors to occur, the team members must believe that offering influence to and accepting it from fellow team members are welcome and constructive actions. Leadership emerges when people with differing world views use dialogue and collaborative learning to create spaces where a shared common purpose can be achieved while a diversity of perspectives is preserved and valued. This study also suggests that this process can be supported by different kinds of meaning-making and process tools. Leadership, then, does not reside in a person or in a role, but in the social system. The built framework integrates the different dimensions of shared leadership and describes their relationships. This way, the findings of this study can be seen as a contribution to the understanding of what constitutes essential aspects of shared leadership in the team context that can be of theoretical value in terms of advancing the adoption and development process of shared leadership. In the real world, teams and organizations can create conditions to foster and facilitate the process. We should encourage leaders and team members to approach leadership as a collective effort that the team can be prepared for, so that the response is rapid and efficient.

Järjestelmätoimittajan suorituskyvyn mittaaminen johtamisen välineenä

Tutkimuksen tavoitteena on analysoida kokonaisratkaisuja tarjoavan järjestelmätoimittajan suorituskyvyn mittaamisen suunnittelua johdon päätöksenteon tukivälineeksi. Alitavoitteena oli suunnitella mittaristo case-yrityksen valitulle yksikölle sekä konsernitasolle. Tutkimuksen myötä havaittiin tarpeelliseksi tunnistaa järjestelmätoimittajan toimialatason vahvimmat ydinkyvykkyydet ja esittää ratkaisuja niiden mittaamiselle. Tutkimuksesta rajattiin mittariston hyödyntäminen yksilötason ohjauksessa. Tutkimusta lähestyttiin toiminta-analyyttisenä tapaustutkimuksena. Tutkimuksen yhteydessä määriteltiin järjestelmätoimittaja teollisen palveluliiketoiminnan toimijaksi, jonka mittaus painottuu asiakaslähtöisen toiminnan edistämiseen. Suurimmat haasteet muodostuivat aineettoman pääoman, pääosin uudistuvan ja uuden liiketoiminnan verkostojen mittaamisesta. Tutkimustuloksena voitiin havaita, että toimialatason keskeisimpiin ydinkyvykkyyksiin ja case-yrityksen linjaamiin menestystekijöihin pohjautunut tarkastelu onnistui tunnistamaan keskeisiä ongelmakohtia järjestelmätoimittajan mittariston suunnittelussa. Merkittävimmät toimenpidesuositukset ja laaditut mittariehdotukset painottavat asiakkaan prosessien tuntemista, oman osaamisen johtamista asiakkaan prosesseihin soveltuviksi, uusien innovaatioiden ja kyvykkyyksien luomista, erilaisten verkostojen tunnistamista ja kehittämistä, kyvykkyyksien johtamista ja tuotekeskeisen myynnin kehittämistä palvelukeskeiseen suuntaan. Tutkimus esittää näihin tuloksiin pohjautuvan mittariston ja prosessin aikana syntyneet mittariehdotukset.

Mentorointiohjelman kehittäminen toimintatutkimuksen keinoin

Tutkielma on toimintatutkimus mentoroinnin kehittämisestä Osuuskauppa Hämeenmaassa. Tutkielman tavoitteena on ollut suunnitella mentorointiohjelma osuuskaupalle ja kehittää sen sisältöä saatujen tutkimustulosten perusteella sekä kuvata mentoroinnin tuomia hyötyjä ohjelman osallistujille ennen ohjelman päättymistä. Mentorointi on keskeinen osa S-ryhmän osaamisen johtamista. Sen avulla voidaan kehittää tärkeitä osaamisia ja suunnata oppimista organisaation tavoitteiden saavuttamiseksi. Mentorointi tukee henkilöstöstrategian mukaista omaehtoista oppimista, jossa yksilöt ottavat vastuun oman ammattitaitonsa ylläpitämisestä ja kehittämisestä organisaation tuella. Tutkielman viitekehykseen on koottu mentoroinnin ja mentorointiohjelman kehittämiseen liittyviä teorioita ja näkökulmia. Viitekehyksen pohjalta on suunniteltu mentorointiohjelman sisältö ja valmennusmateriaalit. Suunnittelu- ja toteutusprosessi on kuvattu tutkielmassa toimintatutkimuksen luonteen mukaisesti. Ohjelmaa ja sen tuomia hyötyjä osallistujille on arvioitu työssä kirjallisen palautekyselyn ja teemahaastatteluiden avulla. Tutkielman keskeisiä tuloksia ovat ohjelman suunnittelua tukeneen viite-kehyksen kokoaminen ja mentorointiohjelman toteuttaminen sille asetettujen tavoitteiden mukaisesti. Ohjelmaa on kehitetty tutkimustulosten perusteella ja tietoa mentoroinnin hyödyistä osallistujien näkökulmasta on kerätty.

Public and Private Sector Decision Makers Within the Rail Baltica Growth Corridor

Transport volumes have increased and will continue to increase in European Union. Even though the growth has not been equal between different transport modes. Most of the growth has been faced on road transport. European Union aims to balance the unbalanced market shares between the modes by gaining and supporting the competitiveness of railway and waterway transport. In EU railway transportation is seen as solution to increase safety in traffic and decrease the environmental impacts of transportation. The aim of this research is to figure out how it is possible to decrease the environmental impacts by the technology already in use. Main focus of this research is in intermodality and combining the road and railway transportation. This study aims also to figure out demands and expectations towards new Rail Baltica railway route connecting Tallinn and Berlin. The research is conducted by performing a literature review about decreasing environmental impacts and combining road and rail transport. Another viewpoint is taken from the possible effects of tourism to the passenger transport on rails. Knowledge gained by literature review is deepened by additional internet questionnaire study and expert interview study. In decreasing the environmental impacts of transportation electric trains are definitely the best option providing that the electricity is generated from renewable or carbon dioxide free sources. Decrease of environmental impacts has been reached also with acceptance of larger road transport vehicles. According to interviewed passenger transport experts, the whole route from Tallinn to Berlin may not be convenient to be used in passenger transport, just because the route is too long.. In EU freight is transported mainly with semi-trailer combinations, and that is why it could be logical if huckepack trains would be used on Rail Baltica. Huckepack train allows semi-trailers to be transported on rails with time efficient loading-unloading process. Overall, Rail Baltica project is experienced as a future-oriented one and new railway alignment is seen as great alternative option for transport modes using fossil fuels.

Ensuring the efficient utilization of Business Intelligence

In recent years, chief information officers (CIOs) around the world have identified Business Intelligence (BI) as their top priority and as the best way to enhance their enterprises competitiveness. Yet, many enterprises are struggling to realize the business value that BI promises. This discrepancy causes important questions, for example: what are the critical success factors of Business Intelligence and, more importantly, how it can be ensured that a Business Intelligence program enhances enterprises competitiveness. The main objective of the study is to find out how it can be ensured that a BI program meets its goals in providing competitive advantage to an enterprise. The objective is approached with a literature review and a qualitative case study. For the literature review the main objective populates three research questions (RQs); RQ1: What is Business Intelligence and why is it important for modern enterprises? RQ2: What are the critical success factors of Business Intelligence programs? RQ3: How it can be ensured that CSFs are met? The qualitative case study covers the BI program of a Finnish global manufacturer company. The research questions for the case study are as follows; RQ4: What is the current state of the case company’s BI program and what are the key areas for improvement? RQ5: In what ways the case company’s Business Intelligence program could be improved? The case company’s BI program is researched using the following methods; action research, semi-structured interviews, maturity assessment and benchmarking. The literature review shows that Business Intelligence is a technology-based information process that contains a series of systematic activities, which are driven by the specific information needs of decision-makers. The objective of BI is to provide accurate, timely, fact-based information, which enables taking actions that lead to achieving competitive advantage. There are many reasons for the importance of Business Intelligence, two of the most important being; 1) It helps to bridge the gap between an enterprise’s current and its desired performance, and 2) It helps enterprises to be in alignment with key performance indicators meaning it helps an enterprise to align towards its key objectives. The literature review also shows that there are known critical success factors (CSFs) for Business Intelligence programs which have to be met if the above mentioned value is wanted to be achieved, for example; committed management support and sponsorship, business-driven development approach and sustainable data quality. The literature review shows that the most common challenges are related to these CSFs and, more importantly, that overcoming these challenges requires a more comprehensive form of BI, called Enterprise Performance Management (EPM). EPM links measurement to strategy by focusing on what is measured and why. The case study shows that many of the challenges faced in the case company’s BI program are related to the above-mentioned CSFs. The main challenges are; lack of support and sponsorship from business, lack of visibility to overall business performance, lack of rigid BI development process, lack of clear purpose for the BI program and poor data quality. To overcome these challenges the case company should define and design an enterprise metrics framework, make sure that BI development requirements are gathered and prioritized by business, focus on data quality and ownership, and finally define clear goals for the BI program and then support and sponsor these goals.

Michelson interferometer with porch swing bearing for portable FTIR spectrometer

The interferometer for low resolution portable Fourier Transform middle infrared spectrometer was developed and studied experimentally. The final aim was a concept for a commercial prototype. Because of the portability, the interferometer should be compact sized and insensitive to the external temperature variations and mechanical vibrations. To minimise the size and manufacturing costs, Michelson interferometer based on plane mirrors and porch swing bearing was selected and no dynamic alignment system was applied. The driving motor was a linear voice coil actuator to avoid mechanical contact of the moving parts. The driving capability for low mirror driving velocities required by the photoacoustic detectors was studied. In total, four versions of such an interferometer were built and experimentally studied. The thermal stability during the external temperature variations and the alignment stability over the mirror travel were measured using the modulation depth of the wide diameter laser beam. Method for estimating the mirror tilt angle from the modulation depth was developed to take account the effect from the non-uniform intensity distribution of the laser beam. The spectrometer stability was finally studied also using the infrared radiation. The latest interferometer was assembled for the middle infrared spectrometer with spectral range from 750 cm−1 to 4500 cm−1. The interferometer size was (197 × 95 × 79) mm3 with the beam diameter of 25 mm. The alignment stability as the change of the tilt angle over the mirror travel of 3 mm was 5 μrad, which decreases the modulation depth only about 0.7 percent in infrared at 3000 cm−1. During the temperature raise, the modulation depth at 3000 cm−1 changed about 1 . . . 2 percentage units per Celsius over short term and even less than 0.2 percentage units per Celsius over the total temperature raise of 30 °C. The unapodised spectral resolution was 4 cm−1 limited by the aperture size. The best achieved signal to noise ratio was about 38 000:1 with commercially available DLaTGS detector. Although the vibration sensitivity requires still improving, the interferometer performed, as a whole, very well and could be further developed to conform all the requirements of the portable and stable spectrometer.