Language Learning in Task Management and Task Accomplishment

In this paper we study student interaction in English and Swedish courses at a Finnish university. We focus on language choices made in task-related activities in small group interaction. Our research interests arose from the change in the teaching curriculum, in which content and language courses were integrated at Tampere University of Technology in 2013. Using conversation analysis, we analysed groups of 4-5 students who worked collaboratively on a task via a video conference programme. The results show how language alternation has different functions in 1) situations where students orient to managing the task, e.g., in transitions into task, or where they orient to technical problems, and 2) situations where students accomplish the task. With the results, we aim to show how language alternation can provide interactional opportunities for language learning. The findings will be useful in designing tasks in the future.

Fouling management and retention in nanofiltration of integrated paper mill effluents

Nanofiltration performance was studied with effluents from the pulp and paper industry and with model substances. The effect of filtration conditions and membrane properties on nanofiltration flux, retention, and fouling was investigated. Generally, the aim was to determine the parameters that influence nanofiltration efficiency and study how to carry out nanofiltration without fouling by controlling these parameters. The retentions of the nanofiltration membranes studied were considerably higher than those of tight ultrafiltration membranes, and the permeate fluxes obtained were approximately the same as those of tight ultrafiltration membranes. Generally, about 80% retentions of total carbon and conductivity were obtained during the nanofiltration experiments. Depending on the membrane and the filtration conditions, the retentions of monovalent ions (chloride) were between 80 and 95% in the nanofiltrations. An increase in pH improved retentions considerably and also the flux to some degree. An increase in pressure improved retention, whereas an increase in temperature decreased retention if the membrane retained the solute by the solution diffusion mechanism. In this study, more open membranes fouled more than tighter membranes due to higher concentration polarization and plugging of the membrane material. More irreversible fouling was measured for hydrophobic membranes. Electrostatic repulsion between the membrane and the components in the solution reduced fouling but did not completely prevent it with the hydrophobic membranes. Nanofiltration could be carried out without fouling, at least with the laboratory scale apparatus used here when the flux was below the critical flux. Model substances had a strong form of the critical flux, but the effluents had only a weak form of the critical flux. With the effluents, some fouling always occurred immediately when the filtration was started. However, if the flux was below the critical flux, further fouling was not observed. The flow velocity and pH were probably the most important parameters, along with the membrane properties, that influenced the critical flux. Precleaning of the membranes had only a small effect on the critical flux and retentions, but it improved the permeability of the membranes significantly.

Knowledge misallocation and growth

We develop a growth model where knowledge is embodied in individuals and diffused across sectors through labor mobility. The existence of labor mobility costs constrains mobility and, thus, generates labor misallocation. Different levels of labor misallocation imply different levels of exploitation of available knowledge and, therefore, different total factor productivity across countries. We derive a positive relationship between growth and labor mobility, which is consistent with the empirical evidence, by assuming aggregate constant returns to capital. We also analyze the short and long run effects of labor mobility costs in the case of decreasing returns to capital. It turns out that changes in mobility costs have larger economic effects when different types of worker have small rather than large complementarities. Finally, we show that different labor income taxes or labor market tightness imply different rates of labor mobility and, therefore, can explain differences in Gross Domestic Product across countries.

Gender diversity and innovation in manufacturing and service firms

Traditionally, researchers have considered the innovation process as being gender neutral. However, recently some studies have begun to take gender diversity into account as a determinant of firms’ innovation. This paper aims to analyse how the effect of gender diversity on innovation output at firm level is sensitive to team size. Using the Spanish PITEC (Panel de Innovación Tecnológica) from 2007 to 2012 for innovative manufacturing and service firms, we estimate a multivariate probit model to analyse how gender diversity both in R&D teams and in the total workforce affect product, process, marketing and organizational innovations. Our results show that gender-diverse teams increase the probability of innovating, and this capacity is positively related team size. Gender diversity, in both the R&D department and the total workforce, has a larger positive impact on the probability of carrying out product and organizational innovations in larger teams than it does in smaller teams. This effect is less clear-cut in the case of marketing and process innovation, where the impact is only significant for micro and small firms. Finally, size effects are of greater importance when we distinguish between the manufacturing and service sectors. JEL Code: O30, O31, J16

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Emergency Management and Wildland-Urban Interface Fires in the United States of America

FEMA's mission is to support our citizens and first responders to ensure that as a Nation we work together to build, sustain, and improve our capability to prepare for, protect against, respond to, recover from, and mitigate all hazards.

Web 2.0 technology assisted global knowledge network as an organizations key asset

Aim of the Thesis is to study and understand the theoretical concept of Metanational corporation and understand how the Web 2.0 technologies can be used to support the theory. Empiric part of the study compares the theory to the case company’s current situation Goal of theoretical framework is to show how the Web 2.0 technologies can be used in the three levels of the Metanational corporation. In order to do this, knowledge management and more accurately knowledge transferring is studied to understand what is needed from the Web 2.0 technologies in the different functions and operations of the Metanational corporation. Final synthesis of the theoretical framework is to present a model where the Web 2.0 technologies are placed on the levels of the Metanational corporation. Empirical part of the study is based on interviews made in the case company. Aim of the interviews is to understand the current state of the company related to the theoretical framework. Based on the interviews, the differences between the theoretical concept and the case company are presented and studied. Finally the study presents the found problem areas, and where the adoption of the Web 2.0 tools is seen as beneficiary, based on the interviews and theoretical framework.

Tieto ja tietämyksenhallinta projektiympäristössä

Tämän tutkimuksen tavoitteena oli selvittää millaista tietoa sisältyy projektiympäristöön, sekä miten tietoa ja tietämystä projektiympäristössä voidaan hallita. Tutkimuksessa tarkasteltiin myös erilaisia tietämyksenhallinnan työkaluja, sekä tekijöitä jotka vaikuttavat tiedon- ja tietämyksenhallinnan onnistumiseen projektiympäristössä. Tutkimus oli tyypiltään kirjallisuustutkimus. Tutkimuksen tuloksia pyrittiin täydentämään kolmen case-esimerkin avulla, jotka oli poimittu kirjallisuudesta. Projektit sisältävät sekä dokumentoitua että inhimillistä tietoa. Tutkimus osoitti dokumentoinnin keskeisen merkityksen projektiympäristön tiedon- ja tietämyksenhallinnassa. Useat projektiympäristön tiedonhallinnan ongelmakohdat liittyvät tiedon luomiseen, oppimiseen ja jakamiseen. Tiedon- ja tietämyksenhallinnan työkalujen valintaan vaikuttavat mm. työympäristö, tiedon luonne ja projektiorganisaatio. Työkaluja ovat esimerkiksi sähköposti, videoneuvottelu, intranet ja tietokannat.

Asiakasräätälöidyn tuotteen vaihtoprojektin kehittäminen palvelutuotannossa

Työ on tehty Lindström Oy:lle tavoitteena löytää tuotevaihtoprojektien kulminaatiopisteet, joissa prosessin sujuvuutta, tiedonhallintaa ja toimintamalleja voitaisiin kehittää. Tavoitteena oli hyödyntää teoriatiedon ja empiirisen tutkimuksen tietämys toimintamalleiksi asiakasräätälöityjen tuotteiden vaihtoprojektissa. Tarkoituksena on ollut huomioida elinkaarihallinta osana tuotekehitystä sekä tuotetiedon hallinta ja sen ohjaava vaikutus projektin eri vaiheissa. Asiakaslähtöisyys ja elinkaarihallinta sekä tietojohtaminen ovat olleet tutkimuksen näkökulmina. Työssä yhdistettiin teorian pohjustama tuotetieto, tuotekehityksen prosessit sekä projektihallinta empiirisen tutkimustuloksen luomiksi kehittämisehdotuksiksi. Tuotevaihtoprojekteihin luotiin kaksi toimintamallia, joissa hyödynnetään tiedon kerääntymistä tietojärjestelmiin. Tuloksissa elinkaarihallinta ehdotetaan linkitettäväksi osaksi tuotekehitysprosessia, jolloin asiakkaan saama arvon lisäys on suoraan taloudellisestikin mitattavissa. Lisäksi työn tuloksena ehdotetaan, että tuotekehityksen systemaattista tiedon keruuta alkuvaiheessaan kehitetään sekä asiakkaan tarvetiedon tarkempaa ja määritellympää tiedon kirjaamista lisätään, tietojärjestelmien suomin mahdollisuuksin.

Efficient installed base information management and utilization in global after sales service business

This Master´s thesis explores how the a global industrial corporation’s after sales service department should arrange its installed base management practices in order to maintain and utilize the installed base information effectively. Case company has product-related records, such as product’s lifecycle information, service history information and information about product’s performance. Information is collected and organized often case by case, therefore the systematic and effective use of installed base information is difficult also the overview of installed base is missing. The goal of the thesis study was to find out how the case company can improve the installed base maintenance and management practices and improve the installed base information availability and reliability. Installed base information management practices were first examined through the literature. The empirical research was conducted by the interviews and questionnaire survey, targeted to the case company’s service department. The research purpose was to find out the challenges related to case company´s service department’s information management practices. The study also identified the installed base information needs and improvement potential in the availability of information. Based on the empirical research findings, recommendations for improve installed base management practices and information availability were created. Grounding of the recommendations, the case company is suggested the following proposals for action: Service report development, improving the change management process, ensuring the quality of the product documentation in early stages of product life cycle and decision to improve installed base management practices.

The influence of strategic entrepreneurship on firm performance

In the study the recently developed concept of strategic entrepreneurship was addressed with the aim to investigate the underlying factors and components constituting the concept and their influence on firm performance. As the result of analysis of existing literature and empirical studies the model of strategic entrepreneurship for the current study is developed with the emphasis on exploration and exploitation parts of the concept. The research model is tested on the data collected in the project ―Factors of growth and success of entrepreneurial firms in Russia‖ by Center for Entrepreneurship of GSOM in 2007 containing answers of owners and managers of 500 firms operating in St. Petersburg and Moscow. Multiple regression analysis showed that exploration and exploitation presented by entrepreneurial values, investments in internal resources, knowledge management and developmental changes are significant factors constituting strategic entrepreneurship and having positive relation to firm performance. The theoretical contribution of the work is linked to development and testing of the model of strategic entrepreneurship. The results can be implemented in management practices of companies willing to engage in strategic entrepreneurship and increase their firm performance.

Enhancing absorptive capacity in a non-research and development. An action research approach to converting individual observations into organisational awareness

The ability to recognize potential knowledge and convert it into business opportunities is one of the key factors of renewal in uncertain environments. This thesis examines absorptive capacity in the context of non-research and development innovation, with a primary focus on the social interaction that facilitates the absorption of knowledge. It proposes that everyone is and should be entitled to take part in the social interaction that shapes individual observations into innovations. Both innovation and absorptive capacity have been traditionally related to research and development departments and institutions. These innovations need to be adopted and adapted by others. This so-called waterfall model of innovations is only one aspect of new knowledge generation and innovation. In addition to this Science–Technology–Innovation perspective, more attention has been recently paid to the Doing–Using–Interacting mode of generating new knowledge and innovations. The amount of literature on absorptive capacity is vast, yet the concept is reified. The greater part of the literature links absorptive capacity to research and development departments. Some publications have focused on the nature of absorptive capacity in practice and the role of social interaction in enhancing it. Recent literature on absorptive capacity calls for studies that shed light on the relationship between individual absorptive capacity and organisational absorptive capacity. There has also been a call to examine absorptive capacity in non-research and development environments. Drawing on the literature on employee-driven innovation and social capital, this thesis looks at how individual observations and ideas are converted into something that an organisation can use. The critical phases of absorptive capacity, during which the ideas of individuals are incorporated into a group context, are assimilation and transformation. These two phases are seen as complementary: whereas assimilation is the application of easy-to-accept knowledge, transformation challenges the current way of thinking. The two require distinct kinds of social interaction and practices. The results of this study can been crystallised thus: “Enhancing absorptive capacity in practicebased non-research and development context is to organise the optimal circumstances for social interaction. Every individual is a potential source of signals leading to innovations. The individual, thus, recognises opportunities and acquires signals. Through the social interaction processes of assimilation and transformation, these signals are processed into the organisation’s reality and language. The conditions of creative social capital facilitate the interplay between assimilation and transformation. An organisation that strives for employee-driven innovation gains the benefits of a broader surface for opportunity recognition and faster absorption.” If organisations and managers become more aware of the benefits of enhancing absorptive capacity in practice, they have reason to assign resources to those practices that facilitate the creation of absorptive capacity. By recognising the underlying social mechanisms and structural features that lead either to assimilation or transformation, it is easier to balance between renewal and effective operations.