Bias voltagecontrolledphotoluminescencefrom b-In2S3 thin films

b-In2S3 thin filmsweredepositedonIndiumTinOxidesubstratesusingtheChemical SprayPyrolysistechnique.Metalcontactwasdepositedoverthe b-In2S3 thin filmto formahetero-structureofthetypeITO/b-In2S3/Metal.Theintensityoftwophoto- luminescenceemissionsfromthe b-In2S3 thin film,centeredat520and690nmcould be variedbytheapplicationofanexternalbiasvoltagetothishetero-structure.The emissionscouldbeswitchedonoroffdependinguponthemagnitudeoftheexternal appliedbiasvoltage.Thusthepresenceoftwoconductingstatesinthishetero-structure could beidentified.Thetemporalvariationinintensityofthephotoluminescence emissionwiththeapplicationofthebiasvoltagehasalsobeenstudied.Thecondition underwhichphotoluminescencequenchingoccurshasbeenrepresentedbyafirst order differentialequationbetweendiffusionlengthandcarrierconcentration

High-Speed Semiconductor Lasers based on Low-Dimensional Active Materials for Optical Telecommunication

The scope of this work is the fundamental growth, tailoring and characterization of self-organized indium arsenide quantum dots (QDs) and their exploitation as active region for diode lasers emitting in the 1.55 µm range. This wavelength regime is especially interesting for long-haul telecommunications as optical fibers made from silica glass have the lowest optical absorption. Molecular Beam Epitaxy is utilized as fabrication technique for the quantum dots and laser structures. The results presented in this thesis depict the first experimental work for which this reactor was used at the University of Kassel. Most research in the field of self-organized quantum dots has been conducted in the InAs/GaAs material system. It can be seen as the model system of self-organized quantum dots, but is not suitable for the targeted emission wavelength. Light emission from this system at 1.55 µm is hard to accomplish. To stay as close as possible to existing processing technology, the In(AlGa)As/InP (100) material system is deployed. Depending on the epitaxial growth technique and growth parameters this system has the drawback of producing a wide range of nano species besides quantum dots. Best known are the elongated quantum dashes (QDash). Such structures are preferentially formed, if InAs is deposited on InP. This is related to the low lattice-mismatch of 3.2 %, which is less than half of the value in the InAs/GaAs system. The task of creating round-shaped and uniform QDs is rendered more complex considering exchange effects of arsenic and phosphorus as well as anisotropic effects on the surface that do not need to be dealt with in the InAs/GaAs case. While QDash structures haven been studied fundamentally as well as in laser structures, they do not represent the theoretical ideal case of a zero-dimensional material. Creating round-shaped quantum dots on the InP(100) substrate remains a challenging task. Details of the self-organization process are still unknown and the formation of the QDs is not fully understood yet. In the course of the experimental work a novel growth concept was discovered and analyzed that eases the fabrication of QDs. It is based on different crystal growth and ad-atom diffusion processes under supply of different modifications of the arsenic atmosphere in the MBE reactor. The reactor is equipped with special valved cracking effusion cells for arsenic and phosphorus. It represents an all-solid source configuration that does not rely on toxic gas supply. The cracking effusion cell are able to create different species of arsenic and phosphorus. This constitutes the basis of the growth concept. With this method round-shaped QD ensembles with superior optical properties and record-low photoluminescence linewidth were achieved. By systematically varying the growth parameters and working out a detailed analysis of the experimental data a range of parameter values, for which the formation of QDs is favored, was found. A qualitative explanation of the formation characteristics based on the surface migration of In ad-atoms is developed. Such tailored QDs are finally implemented as active region in a self-designed diode laser structure. A basic characterization of the static and temperature-dependent properties was carried out. The QD lasers exceed a reference quantum well laser in terms of inversion conditions and temperature-dependent characteristics. Pulsed output powers of several hundred milli watt were measured at room temperature. In particular, the lasers feature a high modal gain that even allowed cw-emission at room temperature of a processed ridge wave guide device as short as 340 µm with output powers of 17 mW. Modulation experiments performed at the Israel Institute of Technology (Technion) showed a complex behavior of the QDs in the laser cavity. Despite the fact that the laser structure is not fully optimized for a high-speed device, data transmission capabilities of 15 Gb/s combined with low noise were achieved. To the best of the author`s knowledge, this renders the lasers the fastest QD devices operating at 1.55 µm. The thesis starts with an introductory chapter that pronounces the advantages of optical fiber communication in general. Chapter 2 will introduce the fundamental knowledge that is necessary to understand the importance of the active region`s dimensions for the performance of a diode laser. The novel growth concept and its experimental analysis are presented in chapter 3. Chapter 4 finally contains the work on diode lasers.

Molecular Beam Epitaxial Growth of III-V Semiconductor Nanostructures on Silicon Substrates

The main focus and concerns of this PhD thesis is the growth of III-V semiconductor nanostructures (Quantum dots (QDs) and quantum dashes) on silicon substrates using molecular beam epitaxy (MBE) technique. The investigation of influence of the major growth parameters on their basic properties (density, geometry, composition, size etc.) and the systematic characterization of their structural and optical properties are the core of the research work. The monolithic integration of III-V optoelectronic devices with silicon electronic circuits could bring enormous prospect for the existing semiconductor technology. Our challenging approach is to combine the superior passive optical properties of silicon with the superior optical emission properties of III-V material by reducing the amount of III-V materials to the very limit of the active region. Different heteroepitaxial integration approaches have been investigated to overcome the materials issues between III-V and Si. However, this include the self-assembled growth of InAs and InGaAs QDs in silicon and GaAx matrices directly on flat silicon substrate, sitecontrolled growth of (GaAs/In0,15Ga0,85As/GaAs) QDs on pre-patterned Si substrate and the direct growth of GaP on Si using migration enhanced epitaxy (MEE) and MBE growth modes. An efficient ex-situ-buffered HF (BHF) and in-situ surface cleaning sequence based on atomic hydrogen (AH) cleaning at 500 °C combined with thermal oxide desorption within a temperature range of 700-900 °C has been established. The removal of oxide desorption was confirmed by semicircular streaky reflection high energy electron diffraction (RHEED) patterns indicating a 2D smooth surface construction prior to the MBE growth. The evolution of size, density and shape of the QDs are ex-situ characterized by atomic-force microscopy (AFM) and transmission electron microscopy (TEM). The InAs QDs density is strongly increased from 108 to 1011 cm-2 at V/III ratios in the range of 15-35 (beam equivalent pressure values). InAs QD formations are not observed at temperatures of 500 °C and above. Growth experiments on (111) substrates show orientation dependent QD formation behaviour. A significant shape and size transition with elongated InAs quantum dots and dashes has been observed on (111) orientation and at higher Indium-growth rate of 0.3 ML/s. The 2D strain mapping derived from high-resolution TEM of InAs QDs embedded in silicon matrix confirmed semi-coherent and fully relaxed QDs embedded in defectfree silicon matrix. The strain relaxation is released by dislocation loops exclusively localized along the InAs/Si interfaces and partial dislocations with stacking faults inside the InAs clusters. The site controlled growth of GaAs/In0,15Ga0,85As/GaAs nanostructures has been demonstrated for the first time with 1 μm spacing and very low nominal deposition thicknesses, directly on pre-patterned Si without the use of SiO2 mask. Thin planar GaP layer was successfully grown through migration enhanced epitaxy (MEE) to initiate a planar GaP wetting layer at the polar/non-polar interface, which work as a virtual GaP substrate, for the GaP-MBE subsequently growth on the GaP-MEE layer with total thickness of 50 nm. The best root mean square (RMS) roughness value was as good as 1.3 nm. However, these results are highly encouraging for the realization of III-V optical devices on silicon for potential applications.

Room-temperature continuous-wave operation of GaInNAs/GaAs quantum dot laser with GaAsN barrier grown by solid source molecular beam epitaxy

We present the results of GaInNAs/GaAs quantum dot structures with GaAsN barrier layers grown by solid source molecular beam epitaxy. Extension of the emission wavelength of GaInNAs quantum dots by ~170nm was observed in samples with GaAsN barriers in place of GaAs. However, optimization of the GaAsN barrier layer thickness is necessary to avoid degradation in luminescence intensity and structural property of the GaInNAs dots. Lasers with GaInNAs quantum dots as active layer were fabricated and room-temperature continuous-wave lasing was observed for the first time. Lasing occurs via the ground state at ~1.2μm, with threshold current density of 2.1kA/cm[superscript 2] and maximum output power of 16mW. These results are significantly better than previously reported values for this quantum-dot system.

Osteomielitis esternal: utilidad de las pruebas de diagnóstico por imágenes con enfoque en medicina nuclear

Introducción: El diagnóstico de osteomielitis esternal post-esternotomía resulta difícil empleando síntomas clínicos o de laboratorio y las imágenes morfológicas orientan a sospecha más que al diagnóstico. Un diagnóstico precoz ofrece calidad de vida y el mejor tratamiento para reducir una mortalidad que oscila entre 14% y 47%. La gammagrafía con leucocitos marcados ofrece el mejor rendimiento diagnóstico para infecciones y se destaca como el patrón de oro diagnóstico. Objetivo: Identificar el desempeño y utilidad de la gammagrafía con leucocitos autólogos marcados con 99mTc-HMPAO en los estudios realizados para la evaluación de osteomielitis esternal. Materiales y métodos: Se realizó un estudio descriptivo, retrospectivo de prueba diagnóstica en la Fundación Cardioinfantil de Bogotá entre enero/2010 y mayo/2015 evaluando gammagrafías con leucocitos marcados ante la sospecha de osteomielitis posterior a esternotomía. Resultados: Se evaluaron 52 pacientes, en los que la gammagrafía con leucocitos mostró 23 pacientes (44,2%) con osteomielitis esternal, logrando una sensibilidad y especificidad del 88,46% y 100% respectivamente. El valor predictivo positivo fue de 100%, y el valor predictivo negativo fue de 89,66%. El impacto de una prueba negativa no modificó el manejo médico inicial en el 93% de los casos mientras que una prueba positiva lo modificó en el 83%. Conclusiones: La gammagrafía con leucocitos autólogos radiomarcados con 99mTc-HMPAO continúa siendo el patrón de oro de referencia no invasiva para el diagnóstico de osteomielitis, y en el caso de osteomielitis esternal se convierte en la prueba de elección pertinente en la selección de pacientes que ameritan una re-intervención quirúrgica.

Determination of the direct band-gap energy of InAlAs matched to InP by photoluminescence excitation spectroscopy

A series of InxAl1-xAs samples (0.51≪x≪0.55)coherently grown on InP was studied in order to measure the band-gap energy of the lattice matched composition. As the substrate is opaque to the relevant photon energies, a method is developed to calculate the optical absorption coefficient from the photoluminescence excitation spectra. The effect of strain on the band-gap energy has been taken into account. For x=0.532, at 14 K we have obtained Eg0=1549±6 meV

Atomic diffusion induced by stress relaxation in InGaAs/GaAs epitaxial layers

The origin of the microscopic inhomogeneities in InxGa1-xAs layers grown on GaAs by molecular beam epitaxy is analyzed through the optical absorption spectra near the band gap. It is seen that, for relaxed thick layers of about 2.8μm, composition inhomogeneities are responsible for the band edge smoothing into the whole compositional range (0.05

Caracterització i revaloració de la fracció plasmàtica de la sang de porc procedent d'escorxadors industrials

La tesi s'ha estructurat en tres apartats que, en conjunt, han de permetre determinar les possibilitats d'aprofitament dins la mateixa indústria alimentària de la fracció plasmàtica de la sang de porc generada per escorxadors que utilitzen sistemes oberts de recollida higiènica. 1. En la primera part s'analitza la composició de la sang higiènica que s'està recollint actualment i s'estudien les característiques tant físico-químiques com microbiològiques que determinen la seva qualitat. La caracterització s'ha realitzat amb sang recollida en diferents escorxadors industrials de les comarques de Girona i s'ha centrat principalment en l'estudi de la contaminació microbiològica i el nivell d'hemòlisi de la sang. S'ha fet un disseny experimental que ha permès alhora valorar l'efecte d'alguns factors sobre la qualitat de la sang: possibles diferències relacionades amb (1) la climatologia del període de l'any en el qual es fa la recollida, (2) particularitats dels escorxadors (grandària, sistemes de dessagnat, tipus, dosi i sistema de dosificació de l'anticoagulant, condicions de processament, maneig i emmagatzematge després de la recollida, etc.). Els resultats obtinguts ens permeten constatar que, en les condicions actuals, la sang que s'està recollint en els escorxadors estudiats no es pot considerar adequada per a una matèria primera de productes destinats a alimentació humana. La major part de la microbiota contaminant s'adquireix en el propi sagnador. S'ha constatat que el sistema de dessagnat en posició horitzontal podria ser una mesura útil per minimitzar la contaminació d'origen fecal o provinent de la pell de l'animal sacrificat i que la separació immediata de les fraccions en el propi escorxador també pot contribuir a reduir la contaminació. Així doncs, en el benentès que l'efectivitat pot obtenir-se del conjunt de mesures preses, més que de l'aplicació d'una sola d'elles, es suggereix la introducció d'una sèrie d'actuacions que potser permetrien reduir els nivells de contaminació que s'obtenen actualment. El tractament mecànic de la sang, el sistema d'addició d'anticoagulant, el volum i concentració de la solució anticoagulant afegida i el període d'emmagatzematge són els factors responsables de l'hemòlisi; mentre que nivells elevats de contaminació microbiològica i el tipus d'anticoagulant utilitzat deterrminen la velocitat d'increment de l'hemòlisi de sang refrigerada. S'ha constatat que quan la sang no pot ser processada immediatament i s'ha d'emmagatzemar en refrigeració és millor utilitzar citrat sòdic enlloc de polifosfat com a anticoagulant ja que l'increment d'hemòlisi es dóna més lentament. 2. El segon apartat s'ha centrat en la fracció plasmàtica de la sang. S'ha utilitzat la deshidratació per atomització com a tecnologia de conservació del plasma i s'ha fet una caracterització del producte en pols resultant des del punt de vista de composició i qualitat. A més de la contaminació microbiològica, que determina la qualitat higiènico-sanitària del producte, s'ha realitzat un estudi de les propietats funcionals que podrien fer del plasma un producte útil en la formulació d'aliments (capacitat escumant, emulsionant, gelificant). S'ha fet especial incidència en (1) determinar l'efecte del procés tecnològic de deshidratació sobre la funcionalitat del producte i (2) estudiar l'estabilitat del plasma deshidratat durant el període d'emmagatzematge. En les condicions de deshidratació per atomització aplicades no es provoca desnaturalització de la fracció proteica i s'obté un producte suficientment deshidratat, amb una aw<0,4 per permetre suposar una bona estabilitat. Algunes mostres de plasma deshidratat analitzades presenten nivells detectables de determinats residus (sulfonamides i corticosteroides). La qualitat microbiològica del producte en pols reflecteix l'elevada contaminació que contenia la matèria primera utilitzada, tot i que la deshidratació per atomització ha comportat la reducció en una unitat logarítmica de la càrrega contaminant. Els recomptes generals de microorganismes són encara preocupants i més tenint en compte que s'ha evidenciat la presència de toxines estafilocòciques en algunes mostres. L'avaluació de les propietats funcionals del producte deshidratat en relació a les que presentava el plasma líquid ens ha permès comprovar que: (1) El procés de deshidratació no ha afectat la solubilitat de les proteïnes. Això, junt amb el fet que no s'obtinguin diferències significatives en l'anàlisi calorimètrica de mostres líquides o deshidratades, permet concloure que el procés no provoca desnaturalització proteica. (2) No s'observen efectes negatius del procés tecnològic sobre la capacitat escumant ni en l'activitat emulsionant de les proteïnes plasmàtiques, dues propietats funcionals que possibiliten l'aplicació del plasma amb aquestes finalitats en l'elaboració d'alguns aliments. (3) La deshidratació tampoc perjudica de manera important les característiques dels gels que s'obtenen per escalfament, ja que els gels obtinguts a partir del plasma líquid i del plasma deshidratat presenten la mateixa capacitat de retenció d'aigua i no s'observen diferències en la microestructura de la xarxa proteica d'ambdós tipus de gel. Tanmateix, els que s'obtenen a partir del producte en pols mostren una menor resistència a la penetració. L'estudi d'estabilitat ens ha permès comprovar que la mostra de plasma deshidratat per atomització perd algunes de les seves propietats funcionals (facilitat de rehidratació, capacitat de retenció d'aigua i fermesa dels gels) si s'emmagatzema a temperatura ambient, mentre que aquestes característiques es mantenen un mínim de sis mesos quan el producte en pols es conserva a temperatura de refrigeració. 3. En l'última part, tenint en compte les conclusions derivades dels resultats dels apartats anteriors, s'han assajat tres possibles sistemes de reducció de la contaminació aplicables a la fracció plasmàtica com a pas previ a la deshidratació, per tal de millorar les característiques de qualitat microbiològica i les perspectives d'estabilitat del producte durant l'emmagatzematge. S'ha determinat l'eficàcia, i l'efecte sobre les propietats del plasma deshidratat, que poden tenir tractaments d'higienització basats en la centrifugació, la microfiltració tangencial i l'aplicació d'altes pressions. Els tractaments de bactofugació aplicats permeten reduir entre el 96 i el 98% la contaminació microbiana del plasma. Aquesta reducció s'aconsegueix tant amb un sistema discontinu com amb un sistema continu treballant a una velocitat de 12 L/h, fet que permetria adaptar el tractament de bactofugació a un procés de producció industrial. Un sistema combinat de bactofugació en continu i microfiltració tangencial permet incrementar l'eficàcia fins a un 99,9 % de reducció. Cal tenir present, però, que aquest tractament provoca també una disminució de l'extracte sec que afecta negativament les propietats funcionals del plasma líquid. Malgrat suposar una pèrdua pel que fa al rendiment, aquest efecte negatiu sobre la funcionalitat no suposaria cap inconvenient si s'utilitzés la deshidratació com a tecnologia de conservació del plasma, ja que es podria corregir l'extracte sec durant la reconstitució del producte. Caldria avaluar si la millora en la qualitat higiènico-sanitària del producte compensa o no les pèrdues que suposa aquest sistema d'higienització combinat. Amb relació als tractaments d'alta pressió, de totes les condicions de tractament assajades, les pressions de fins 450 MPa permeten obtenir plasma sense modificacions importants que impedeixin la seva deshidratació per atomització. Així doncs, les condicions de procés que s'han aplicat són pressuritzacions a 450 MPa de 15 minuts de durada. La temperatura de tractament que s'ha mostrat més eficaç en la reducció dels recomptes de microorganismes ha estat de 40ºC. Els tractaments a aquesta temperatura permeten assolir reduccions del 99,97% i disminuir en un 80% la capacitat de creixement dels microorganismes supervivents a la pressurització en relació a la que presentava la població contaminant del plasma abans del tractament. L'estudi de l'efecte d'aquest tractament (450 MPa, 15 min i 40ºC) sobre les propietats funcionals del plasma ha permès observar que la pressurització comporta una disminució en la solubilitat del producte però una millora en les propietats de superfície -estabilitat de l'escuma i activitat emulsionant- i un increment de la capacitat de retenció d'aigua i de la duresa dels gels obtinguts per escalfament. Calen més estudis per confirmar i caracteritzar aquesta millora en la funcionalitat, així com per establir si el tractament de pressurització afecta també l'estabilitat del producte durant l'emmagatzematge. De totes les tecnologies d'higienització assajades, l'alta pressió és la que permet obtenir millors resultats en el sentit de poder garantir un producte de bona qualitat microbiològica i segur, des del punt de vista sanitari i tecnològic, per a la seva utilització com a ingredient alimentari.

The interplay of metal-atom ordering, Fermi leveltuning and thermoelectric properties in cobalt shandites Co3M2S2 (M = Sn, In)

A combination of structural, physical and computational techniques including powder X-ray and neutron diffraction, SQUID magnetometry, electrical and thermal transport measurements, DFT calculations and 119Sn Mössbauer and X-ray photoelec-tron spectroscopies has been applied to Co3Sn2-xInxS2 (0 ≤ x ≤ 2) in an effort to understand the relationship between metal-atom ordering and physical properties as the Fermi level is systematically varied. Whilst solid solution behavior is found throughout the composition region, powder neutron diffraction reveals that indium preferentially occupies an inter-layer site over an alternative kagome-like intra-layer site. DFT calculations indicate that this ordering, which leads to a lowering of energy, is related to the dif-fering bonding properties of tin and indium. Spectroscopic data suggest that throughout the composition range 0 ≤ x ≤ 2, all ele-ments adopt oxidation states that are significantly reduced from expectations based on formal charges. Chemical substitution ena-bles the electrical transport properties to be controlled through tuning of the Fermi level within a region of the density of states, which comprises narrow bands of predominantly Co d-character. This leads to a compositionally-induced double metal-to-semiconductor-to-metal transition. The marked increase in the Seebeck coefficient as the semiconducting region is approached leads to a substantial improvement in the thermoelectric figure of merit, ZT, which exhibits a maximum of ZT = 0.32 at 673 K. At 425 K, the figure of merit for phases in the region 0.8 ≤ x ≤ 0.85 is amongst the highest reported for sulphide phases, suggesting these materials may have applications in low-grade waste heat recovery.

Polymorphism and optical properties in [NH4][InSe2]

The solvothermal synthesis and characterization of two indium selenides with stoichiometry [NH4][InSe2] is described. Yellow [NH4][InSe2] (1), which exhibits a layered structure, was initially prepared in an aqueous solution of trans-1,4-diaminocyclohexane, and subsequently using a concentrated ammonia solution. A red polymorph of one-dimensional character, [NH4][InSe2] (2), was obtained using 3,5-dimethylpyridine as solvent. [NH4][InSe2] (1) crystallizes in the non-centrosymmetric space group Cc (a=11.5147(6), b=11.3242(6), c=15.9969(9) Å and β=100.354(3)°). The structural motif of the layers is the In4Se10 adamantane unit, composed of four corner-linked InSe4 tetrahedra. These units are linked by their corners, forming [InSe2]− layers which are stacked back to back along the c-direction, and interspaced by [NH4]+cations. The one-dimensional polymorph, (2), crystallizes in the tetragonal space group, I4/mcm (a=8.2519(16), c=6.9059 (14) Å). This structure contains infinite chains of edge-sharing InSe4 tetrahedra separated by [NH4]+ cations.

Melatonin and IP(3)-induced Ca(2+) Release from Intracellular Stores in the Malaria Parasite Plasmodium falciparum within Infected Red Blood Cells

IP(3)-dependent Ca(2+) signaling controls a myriad of cellular processes in higher eukaryotes and similar signaling pathways are evolutionarily conserved in Plasmodium, the intracellular parasite that causes malaria. We have reported that isolated, permeabilized Plasmodium chabaudi, releases Ca(2+) upon addition of exogenous IP(3). In the present study, we investigated whether the IP(3) signaling pathway operates in intact Plasmodium falciparum, the major disease-causing human malaria parasite. P. falciparum-infected red blood cells (RBCs) in the trophozoite stage were simultaneously loaded with the Ca(2+) indicator Fluo-4/AM and caged-IP(3). Photolytic release of IP(3) elicited a transient Ca(2+) increase in the cytosol of the intact parasite within the RBC. The intracellular Ca(2+) pools of the parasite were selectively discharged, using thapsigargin to deplete endoplasmic reticulum (ER) Ca(2+) and the antimalarial chloroquine to deplete Ca(2+) from acidocalcisomes. These data show that the ER is the major IP(3)-sensitive Ca(2+) store. Previous work has shown that the human host hormone melatonin regulates P. falciparum cell cycle via a Ca(2+)-dependent pathway. In the present study, we demonstrate that melatonin increases inositol-polyphosphate production in intact intraerythrocytic parasite. Moreover, the Ca(2+) responses to melatonin and uncaging of IP(3) were mutually exclusive in infected RBCs. Taken together these data provide evidence that melatonin activates PLC to generate IP(3) and open ER-localized IP(3)-sensitive Ca(2+) channels in P. falciparum. This receptor signaling pathway is likely to be involved in the regulation and synchronization of parasite cell cycle progression.

Ion beam assisted deposition of an organic light emitting diode electrode

This work presents the electro-optical characterization of metal-organic interfaces prepared by the Ion Beam Assisted Deposition (IBAD) method. IBAD applied in this work combines simultaneously metallic film deposition and bombardment with an independently controlled ion beam, allowing different penetration of the ions and the evaporated metallic elements into the polymer. The result is a hybrid, non-abrupt interface, where polymer, metal and ion coexists. We used an organic light emitting diode, which has a typical vertical-architecture, for the interface characterization: Glass/Indium Tin Oxide (ITO)/Poly[ethylene-dioxythiophene/poly{styrenesulfonicacid}]) (PEDOT:PSS) /Emitting Polymer/Metal. The emitting polymer layer comprised of the Poly[(9,9-dioctyl-2,7-divinylenefluorenylene)-alt-co-{2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene}] (PFO) and the metal layer of aluminum prepared with different Ar(+) ion energies varying in the range from 0 to 1000 eV. Photoluminescence, Current-Voltage and Electroluminescence measurements were used to study the emission and electron injection properties. Changes of these properties were related with the damage caused by the energetic ions and the metal penetration into the polymer. Computer simulations of hybrid interface damage and metal penetration were confronted with experimental data. (C) 2010 Elsevier B.V. All rights reserved.

CALCULATION OF MAGNETODONOR STATES IN InP AND POLARON EFFECTS

Far-infrared transitions in polar semiconductors are known to be affected by the presence of shallow donor impurities, external magnetic fields and the electron-LO-phonon interaction. We calculate the magnetodonor states in indium phosphide by a diagonalization procedure, and introduce the electron-phonon interaction by the Frohlich term. The main effects of this perturbation are calculated by a multi-level version of the Wigner-Brillouin theory. We determine the transition energies, from the ground state to excited states, and find good qualitative agreement with recently reported absorption-spectroscopy measurements in the 100-800 cm(-1) range, with applied magnetic fields up to 30 T. Our calculations suggest that experimental peak splittings in the 400-450 cm(-1) range are due to the electron-phonon interaction.

Enzyme immobilisation on electroactive nanostructured membranes (ENM): Optimised architectures for biosensing

Electroactive nanostructured membranes have been produced by the layer-by-layer (LbL) technique, and used to make electrochemical enzyme biosensors for glucose by modification with cobalt hexacyanoferrate redox mediator and immobilisation of glucose oxidase enzyme. Indium tin oxide (ITO) glass electrodes were modified with up to three bilayers of polyamidoamine (PAMAM) dendrimers containing gold nanoparticles and poly(vinylsulfonate) (PVS). The gold nanoparticles were covered with cobalt hexacyanoferrate that functioned as a redox mediator, allowing the modified electrode to be used to detect H(2)O(2), the product of the oxidase enzymatic reaction, at 0.0 V vs. SCE. Enzyme was then immobilised by cross-linking with glutaraldehyde. Several parameters for optimisation of the glucose biosensor were investigated, including the number of deposited bilayers, the enzyme immobilisation protocol and the concentrations of immobilised enzyme and of the protein that was crosslinked with PAMAM. The latter was used to provide glucose oxidase with a friendly environment, in order to preserve its bioactivity. The optimised biosensor, with three bilayers, has high sensitivity and operational stability, with a detection limit of 6.1 mu M and an apparent Michaelis-Menten constant of 0.20 mM. It showed good selectivity against interferents and is suitable for glucose measurements in natural samples. (C) 2008 Elsevier B.V. All rights reserved.

Phytase immobilization on modified electrodes for amperometric biosensing

Phytase (myo-inositol hexaphosphate phosphohydrolase) and phytic acid (myo-inositol hexaphosphate) play an important environmental role, in addition to being a health issue in food industry. Phytic acid is antinutritional due to its ability to chelate metal ions and may also react with proteins decreasing their bioavailability. In this work, we produced biosensors with phytase immobilized in Layer-by-Layer (LbL) films, which could detect phytic acid with a detection limit of 0.19 mmol L-1, which is sufficient to detect phytic acid in seeds of grains and vegetables. The biosensosrs consisted of LbL films containing up to eight bilayers of phytase alternated with poly(allylamine) hydrochloride (PAH) deposited onto an indium-tin oxide (ITO) substrate modified with Prussian Blue. Amperometric detection was conducted in an acetate buffer solution (at pH 5.5) at room temperature, with the biosensor response attributed to the formation of phosphate ions. In subsidiary experiments with the currents measured at 0.0 V (vs. SCE), we demonstrated the absence of effects from some interferents, pointing to a good selectivity of the biosensor. (c) 2007 Elsevier B.V. All rights reserved.