Fluid dynamical prediction of changed v1-flow at energies available at the CERN Large Hadron Collider

Substantial collective flow is observed in collisions between lead nuclei at Large Hadron Collider (LHC) as evidenced by the azimuthal correlations in the transverse momentum distributions of the produced particles. Our calculations indicate that the global v1-flow, which at RHIC peaked at negative rapidities (named third flow component or antiflow), now at LHC is going to turn toward forward rapidities (to the same side and direction as the projectile residue). Potentially this can provide a sensitive barometer to estimate the pressure and transport properties of the quark-gluon plasma. Our calculations also take into account the initial state center-of-mass rapidity fluctuations, and demonstrate that these are crucial for v1 simulations. In order to better study the transverse momentum flow dependence we suggest a new"symmetrized" vS1(pt) function, and we also propose a new method to disentangle global v1 flow from the contribution generated by the random fluctuations in the initial state. This will enhance the possibilities of studying the collective Global v1 flow both at the STAR Beam Energy Scan program and at LHC.

Dynamic Model of a Small Once-Through Boiler

In this study, a model for the unsteady dynamic behaviour of a once-through counter flow boiler that uses an organic working fluid is presented. The boiler is a compact waste-heat boiler without a furnace and it has a preheater, a vaporiser and a superheater. The relative lengths of the boiler parts vary with the operating conditions since they are all parts of a single tube. The present research is a part of a study on the unsteady dynamics of an organic Rankine cycle power plant and it will be a part of a dynamic process model. The boiler model is presented using a selected example case that uses toluene as the process fluid and flue gas from natural gas combustion as the heat source. The dynamic behaviour of the boiler means transition from the steady initial state towards another steady state that corresponds to the changed process conditions. The solution method chosen was to find such a pressure of the process fluid that the mass of the process fluid in the boiler equals the mass calculated using the mass flows into and out of the boiler during a time step, using the finite difference method. A special method of fast calculation of the thermal properties has been used, because most of the calculation time is spent in calculating the fluid properties. The boiler was divided into elements. The values of the thermodynamic properties and mass flows were calculated in the nodes that connect the elements. Dynamic behaviour was limited to the process fluid and tube wall, and the heat source was regarded as to be steady. The elements that connect the preheater to thevaporiser and the vaporiser to the superheater were treated in a special way that takes into account a flexible change from one part to the other. The model consists of the calculation of the steady state initial distribution of the variables in the nodes, and the calculation of these nodal values in a dynamic state. The initial state of the boiler was received from a steady process model that isnot a part of the boiler model. The known boundary values that may vary during the dynamic calculation were the inlet temperature and mass flow rates of both the heat source and the process fluid. A brief examination of the oscillation around a steady state, the so-called Ledinegg instability, was done. This examination showed that the pressure drop in the boiler is a third degree polynomial of the mass flow rate, and the stability criterion is a second degree polynomial of the enthalpy change in the preheater. The numerical examination showed that oscillations did not exist in the example case. The dynamic boiler model was analysed for linear and step changes of the entering fluid temperatures and flow rates.The problem for verifying the correctness of the achieved results was that there was no possibility o compare them with measurements. This is why the only way was to determine whether the obtained results were intuitively reasonable and the results changed logically when the boundary conditions were changed. The numerical stability was checked in a test run in which there was no change in input values. The differences compared with the initial values were so small that the effects of numerical oscillations were negligible. The heat source side tests showed that the model gives results that are logical in the directions of the changes, and the order of magnitude of the timescale of changes is also as expected. The results of the tests on the process fluid side showed that the model gives reasonable results both on the temperature changes that cause small alterations in the process state and on mass flow rate changes causing very great alterations. The test runs showed that the dynamic model has no problems in calculating cases in which temperature of the entering heat source suddenly goes below that of the tube wall or the process fluid.

Ion-exchange resins as stationary phase in reactive chromatography

Dynamic behavior of bothisothermal and non-isothermal single-column chromatographic reactors with an ion-exchange resin as the stationary phase was investigated. The reactor performance was interpreted by using results obtained when studying the effect of the resin properties on the equilibrium and kinetic phenomena occurring simultaneously in the reactor. Mathematical models were derived for each phenomenon and combined to simulate the chromatographic reactor. The phenomena studied includes phase equilibria in multicomponent liquid mixture¿ion-exchange resin systems, chemicalequilibrium in the presence of a resin catalyst, diffusion of liquids in gel-type and macroporous resins, and chemical reaction kinetics. Above all, attention was paid to the swelling behavior of the resins and how it affects the kinetic phenomena. Several poly(styrene-co-divinylbenzene) resins with different cross-link densities and internal porosities were used. Esterification of acetic acid with ethanol to produce ethyl acetate and water was used as a model reaction system. Choosing an ion-exchange resin with a low cross-link density is beneficial inthe case of the present reaction system: the amount of ethyl acetate as well the ethyl acetate to water mole ratio in the effluent stream increase with decreasing cross-link density. The enhanced performance of the reactor is mainly attributed to increasing reaction rate, which in turn originates from the phase equilibrium behavior of the system. Also mass transfer considerations favor the use ofresins with low cross-link density. The diffusion coefficients of liquids in the gel-type ion-exchange resins were found to fall rapidly when the extent of swelling became low. Glass transition of the polymer was not found to significantlyretard the diffusion in sulfonated PS¿DVB ion-exchange resins. It was also shown that non-isothermal operation of a chromatographic reactor could be used to significantly enhance the reactor performance. In the case of the exothermic modelreaction system and a near-adiabatic column, a positive thermal wave (higher temperature than in the initial state) was found to travel together with the reactive front. This further increased the conversion of the reactants. Diffusion-induced volume changes of the ion-exchange resins were studied in a flow-through cell. It was shown that describing the swelling and shrinking kinetics of the particles calls for a mass transfer model that explicitly includes the limited expansibility of the polymer network. A good description of the process was obtained by combining the generalized Maxwell-Stefan approach and an activity model that was derived from the thermodynamics of polymer solutions and gels. The swelling pressure in the resin phase was evaluated by using a non-Gaussian expression forthe polymer chain length distribution. Dimensional changes of the resin particles necessitate the use of non-standard mathematical tools for dynamic simulations. A transformed coordinate system, where the mass of the polymer was used as a spatial variable, was applied when simulating the chromatographic reactor columns as well as the swelling and shrinking kinetics of the resin particles. Shrinking of the particles in a column leads to formation of dead volume on top of the resin bed. In ordinary Eulerian coordinates, this results in a moving discontinuity that in turn causes numerical difficulties in the solution of the PDE system. The motion of the discontinuity was eliminated by spanning two calculation grids in the column that overlapped at the top of the resin bed. The reactive and non-reactive phase equilibrium data were correlated with a model derived from thethermodynamics of polymer solution and gels. The thermodynamic approach used inthis work is best suited at high degrees of swelling because the polymer matrixmay be in the glassy state when the extent of swelling is low.

Caracterización de rodales irregulares de Abies alba Mill. capitalizados en existencias del Valle de Arán (Pirineos, España) y de las cortas de entresaca practicadas

Se describe, en una zona de la vertiente norte de los Pirineos españoles, la estructura dasocrática de rodales irregulares de abeto excesivamente capitalizados en existencias volumétricas, así como la naturaleza de las intervenciones de entresaca que se les aplican al objeto de contrarrestar la tendencia hacia una indeseable uniformidad de la masa. La situación inicial revela una elevada espesura, con importantes excedentes de individuos pertenecientes a las clases diamétricas de madera gruesa, y que conduce a formas selvícolas tipológicas en avanzado proceso de regularización. Empero, la estabilidad mecánica de los pies se manifiesta alejada de sus umbrales críticos en todos los estratos, y la capacidad de regeneración del sistema resulta aceptable. El tratamiento de entresaca realizado, cuya severidad se centró fundamentalmente sobre los pies de diámetro superior a 30 cm, mantiene todavía una situación de espesura excesiva que impide la adscripción de los rodales a estructuras equilibradas, pero ha permitido la liberación de la competencia vertical de los pies en edad de latizal.

Tietojärjestelmien tukipalveluprosessien kehittäminen - case Helsoft

Tässä diplomityössä on käsitelty tietojärjestelmien tukipalveluun liittyviä prosesseja ja toimintoja. Tukipalvelutoiminnot ovat tietojärjestelmäteollisuuden merkittävä osa-alue ja siihen nähden aiheen tutkimus on ollut hyvin vähäistä. Viimeaikoina aihe on herättänyt kiinnostusta varsinkin asiakaskohtaisia ohjelmistoja toimittavien ohjelmistoyritysten keskuudessa. Diplomityön tarkoituksena oli suunnitella ja kehittää Helsoft Oy:n asiakaskohtaisten ohjelmistojen tukipalvelutoimintoja. Tämän työn näkökulmasta tukipalveluun kuuluu tietojärjestelmän toimituksen jälkeinen asiakkaiden neuvontapalvelu sekä ohjelmiston muutos- ja ylläpitopalvelu. Tukipalvelun sisältö vaihtelee usein asiakaskohtaisesti. Tämän vuoksi tukipalvelusta on syytä tehdä asianmukainen toimittajan ja asiakkaan välinen sopimus. Sopimuksen lisäksi tässä työssä on käsitelty myös muita tukipalvelun työkaluja kuten esimerkiksi tukipalveluohjetta, joka muodostetaan tukipalveluun ottamisvaiheessa. Työn teoriaosassa on käsitelty tietojärjestelmien tukipalvelun perusasioita sekä edellytyksiä tukipalveluprosessin onnistuneen kuvauksen muodostamiselle. Prosessin kuvauskieleksi on valittu UML. Työn soveltavan osuuden sisältö koostuu Helsoftin tukipalvelun nykytilanteen kartoituksesta, uuden yhtenäisemmän prosessimallin suunnittelusta (vaihe 1) sekä tukipalveluprosessin jatkokehityksen ja tehostamisen (vaihe 2) suunnittelusta. Uusi yhtenäinen prosessimalli on suhteellisen helposti käyttöönotettavissa ja standardinmukaisen kuvaustavan johdosta sitä voidaan kehittää jatkossa jatkuvan parantamisen periaatteella.

Developing Supply Management Processes in a Global Process Automation Organization

Tämän työn tarkoituksena on tutkia prosessien uudelleensuunnittelua ja erityisesti hankintaprosessien uudistamista kansainvälisessä prosessiautomaatioyrityksessä. Työn aihealuetta tutkitaan sekä henkilöstön, uuden teknologian että prosessien kehittämisen näkökulmasta. Prosessien kehittämisessä työkaluna on käytetty tunnettua laatutyökalua, Six Sigmaa. Työn päätavoitteena on luoda uudet toimintamallit kehitettäville prosesseille. Kirjallisuuden lisäksi työ perustuu kirjoittajan kokemuksiin ja havaintoihin projektitiimin jäsenenä. Prosessien kehittämistä tarkastellaan myös muutoksenhallinnan näkökulmasta. Tämä on alue, jota ei saisi koskaan jättää huomiotta kehityshankkeissa. Kehitettäessä liiketoimintaprosesseja muutoksenhallinta on menestyksen kannalta ensisijaisen tärkeää. Muutoksenhallintaa tutkitaan työssä sekä organisaation että yksilön kannalta. Tässä työssä esitellään lisäksi maailmanlaajuisesti tunnettu ja käytetty laatutyökalu, Six Sigma. Six Sigmaa on käytetty myös työn lopussa tarkasteltavassa case-osuudessa. Case-osuudessa prosesseja tutkitaan aina nykytilasta uusiin toimintamalleihin saakka. Prosesseja ja niiden suorituskykyä analysoidaan yhtäjaksoisesti kehitysprojektien edetessä.

Fluid dynamical prediction of changed v1-flow at energies available at the CERN Large Hadron Collider

Substantial collective flow is observed in collisions between lead nuclei at Large Hadron Collider (LHC) as evidenced by the azimuthal correlations in the transverse momentum distributions of the produced particles. Our calculations indicate that the global v1-flow, which at RHIC peaked at negative rapidities (named third flow component or antiflow), now at LHC is going to turn toward forward rapidities (to the same side and direction as the projectile residue). Potentially this can provide a sensitive barometer to estimate the pressure and transport properties of the quark-gluon plasma. Our calculations also take into account the initial state center-of-mass rapidity fluctuations, and demonstrate that these are crucial for v1 simulations. In order to better study the transverse momentum flow dependence we suggest a new"symmetrized" vS1(pt) function, and we also propose a new method to disentangle global v1 flow from the contribution generated by the random fluctuations in the initial state. This will enhance the possibilities of studying the collective Global v1 flow both at the STAR Beam Energy Scan program and at LHC.

New method for measuring longitudinal fuctuations and directed flow in ultrarelativistic heavy ion reactions

It has been shown in recent ALICE@LHC measurements that the odd flow harmonics, in particular, a directed flow v1, occurred to be weak and dominated by random fluctuations. In this work we propose a new method, which makes the measurements more sensitive to the flow patterns showing global collective symmetries. We demonstrate how the longitudinal center of mass rapidity fluctuations can be identified, and then the collective flow analysis can be performed in the event-by-event center of mass frame. Such a method can be very effective in separating the flow patterns originating from random fluctuations, and the flow patterns originating from the global symmetry of the initial state.

Improving Evaluation and Development Capability in Verification and Validation

Validation and verification operations encounter various challenges in product development process. Requirements for increasing the development cycle pace set new requests for component development process. Verification and validation usually represent the largest activities, up to 40 50 % of R&D resources utilized. This research studies validation and verification as part of case company's component development process. The target is to define framework that can be used in improvement of the validation and verification capability evaluation and development in display module development projects. Validation and verification definition and background is studied in this research. Additionally, theories such as project management, system, organisational learning and causality is studied. Framework and key findings of this research are presented. Feedback system according of the framework is defined and implemented to the case company. This research is divided to the theory and empirical parts. Theory part is conducted in literature review. Empirical part is done in case study. Constructive methode and design research methode are used in this research A framework for capability evaluation and development was defined and developed as result of this research. Key findings of this study were that double loop learning approach with validation and verification V+ model enables defining a feedback reporting solution. Additional results, some minor changes in validation and verification process were proposed. There are a few concerns expressed on the results on validity and reliability of this study. The most important one was the selected research method and the selected model itself. The final state can be normative, the researcher may set study results before the actual study and in the initial state, the researcher may describe expectations for the study. Finally reliability of this study, and validity of this work are studied.

Tuotekustannuslaskennan kehittäminen leipomoyrityksessä

Tutkimus käsittelee tuotekustannuslaskennan kehittämistä VAASAN Oy:ssä, joka on yksi johtavista leipomoyrityksistä Suomessa ja Baltiassa. Työn tavoitteena on kehittää tuotekustannuslaskentaa paremmin päätöksentekoa tukevaksi. Kehitystyössä otettiin huomioon laskentamallin joustavuuden säilyminen. Kehitystarpeet selvitettiin tuotekustannuslaskennan nykytilaanalyysillä sekä käyttäjäryhmien tietotarvekartoituksella. Kehityksen ohjaamiseen sovellettiin kustannustiedon laadukkuuden teorioita sekä riskienhallinnan työkalua. Lähtökohtana oli varsin hajautetusti toteutettu tuotekustannuslaskenta, minkä luotettavuuden ongelma tiedostettiin. Työn päätteeksi tuotekustannuslaskenta keskitetään. Keskittämisen tuoma tilaisuus halutaan käyttää mahdollisimman tehokkaasti hyödyksi kustannuslaskennan kehittämisessä. Ennen keskittämistä tulee tuotekustannuslaskenta johdonmukaistaa eri leipomoiden välillä. Tässä työssä kartoitettiin kehityskohteet sekä esitetään toimintamalli tai –ehdotus tärkeimpien kehityskohteiden ratkaisemiseksi. Tärkeimmät kehityskohteet löydettiin jäsentämällä ja priorisoimalla kehityskohteet. Tuotekustannuslaskentaa kehitettiin paremmin päätöksentekoa tukevaksi, johdonmukaisemmaksi, luotettavammaksi sekä sen käytettävyyttä kehitettiin.

Universal Quantum Cloning

After introducing the no-cloning theorem and the most common forms of approximate quantum cloning, universal quantum cloning is considered in detail. The connections it has with universal NOT-gate, quantum cryptography and state estimation are presented and briefly discussed. The state estimation connection is used to show that the amount of extractable classical information and total Bloch vector length are conserved in universal quantum cloning. The 1  2 qubit cloner is also shown to obey a complementarity relation between local and nonlocal information. These are interpreted to be a consequence of the conservation of total information in cloning. Finally, the performance of the 1  M cloning network discovered by Bužek, Hillery and Knight is studied in the presence of decoherence using the Barenco et al. approach where random phase fluctuations are attached to 2-qubit gates. The expression for average fidelity is calculated for three cases and it is found to depend on the optimal fidelity and the average of the phase fluctuations in a specific way. It is conjectured to be the form of the average fidelity in the general case. While the cloning network is found to be rather robust, it is nevertheless argued that the scalability of the quantum network implementation is poor by studying the effect of decoherence during the preparation of the initial state of the cloning machine in the 1 ! 2 case and observing that the loss in average fidelity can be large. This affirms the result by Maruyama and Knight, who reached the same conclusion in a slightly different manner.

Determination of anaerobic threshold in rats using the lactate minimum test

The break point of the curve of blood lactate vs exercise load has been called anaerobic threshold (AT) and is considered to be an important indicator of endurance exercise capacity in human subjects. There are few studies of AT determination in animals. We describe a protocol for AT determination by the "lactate minimum test" in rats during swimming exercise. The test is based on the premise that during an incremental exercise test, and after a bout of maximal exercise, blood lactate decreases to a minimum and then increases again. This minimum value indicates the intensity of the AT. Adult male (90 days) Wistar rats adapted to swimming for 2 weeks were used. The initial state of lactic acidosis was obtained by making the animals jump into the water and swim while carrying a load equivalent to 50% of body weight for 6 min (30-s exercise interrupted by a 30-s rest). After a 9-min rest, blood was collected and the incremental swimming test was started. The test consisted of swimming while supporting loads of 4.5, 5.0, 5.5, 6.0 and 7.0% of body weight. Each exercise load lasted 5 min and was followed by a 30-s rest during which blood samples were taken. The blood lactate minimum was determined from a zero-gradient tangent to a spline function fitting the blood lactate vs workload curve. AT was estimated to be 4.95 ± 0.10% of body weight while interpolated blood lactate was 7.17 ± 0.16 mmol/l. These results suggest the application of AT determination in animal studies concerning metabolism during exercise.

Initialization of Continuous Nonlinear Models Using Extended Kalman Filter

The two main objectives of Bayesian inference are to estimate parameters and states. In this thesis, we are interested in how this can be done in the framework of state-space models when there is a complete or partial lack of knowledge of the initial state of a continuous nonlinear dynamical system. In literature, similar problems have been referred to as diffuse initialization problems. This is achieved first by extending the previously developed diffuse initialization Kalman filtering techniques for discrete systems to continuous systems. The second objective is to estimate parameters using MCMC methods with a likelihood function obtained from the diffuse filtering. These methods are tried on the data collected from the 1995 Ebola outbreak in Kikwit, DRC in order to estimate the parameters of the system.

Studies on the interaction of two level atoms with quantized electromagnetic field

The present study described about the interaction of a two level atom and squeezed field with time varying frequency. By applying a sinusoidal variation in the frequency of the field, the randomness in population inversion is reduced and the collapses and periodic revivals are regained. Quantum optics is an emerging field in physics which mainly deals with the interaction of atoms with quantised electromagnetic fields. Jaynes-Cummings Model (JCM) is a key model among them, which describes the interaction between a two level atom and a single mode radiation field. Here the study begins with a brief history of light, atom and their interactions. Also discussed the interaction between atoms and electromagnetic fields. The study suggest a method to manipulate the population inversion due to interaction and control the randomness in it, by applying a time dependence on the frequency of the interacting squeezed field.The change in behaviour of the population inversion due to the presence of a phase factor in the applied frequency variation is explained here.This study also describes the interaction between two level atom and electromagnetic field in nonlinear Kerr medium. It deals with atomic and field state evolution in a coupled cavity system. Our results suggest a new method to control and manipulate the population of states in two level atom radiation interaction,which is very essential for quantum information processing.We have also studied the variation of atomic population inversion with time, when a two level atom interacts with light field, where the light field has a sinusoidal frequency variation with a constant phase. In both coherent field and squeezed field cases, the population inversion variation is completely different from the phase zero frequency modulation case. It is observed that in the presence of a non zero phase φ, the population inversion oscillates sinusoidally.Also the collapses and revivals gradually disappears when φ increases from 0 to π/2. When φ = π/2 the evolution of population inversion is identical to the case when a two level atom interacts with a Fock state. Thus, by applying a phase shifted frequency modulation one can induce sinusoidal oscillations of atomic inversion in linear medium, those normally observed in Kerr medium. We noticed that the entanglement between the atom and field can be controlled by varying the period of the field frequency fluctuations. The system has been solved numerically and the behaviour of it for different initial conditions and different susceptibility values are analysed. It is observed that, for weak cavity coupling the effect of susceptibility is minimal. In cases of strong cavity coupling, susceptibility factor modifies the nature in which the probability oscillates with time. Effect of susceptibility on probability of states is closely related to the initial state of the system.

CD-Systems of Restarting Automata

Die vorliegende Arbeit behandelt Restartautomaten und Erweiterungen von Restartautomaten. Restartautomaten sind ein Werkzeug zum Erkennen formaler Sprachen. Sie sind motiviert durch die linguistische Methode der Analyse durch Reduktion und wurden 1995 von Jancar, Mráz, Plátek und Vogel eingeführt. Restartautomaten bestehen aus einer endlichen Kontrolle, einem Lese/Schreibfenster fester Größe und einem flexiblen Band. Anfänglich enthält dieses sowohl die Eingabe als auch Bandbegrenzungssymbole. Die Berechnung eines Restartautomaten läuft in so genannten Zyklen ab. Diese beginnen am linken Rand im Startzustand, in ihnen wird eine lokale Ersetzung auf dem Band durchgeführt und sie enden mit einem Neustart, bei dem das Lese/Schreibfenster wieder an den linken Rand bewegt wird und der Startzustand wieder eingenommen wird. Die vorliegende Arbeit beschäftigt sich hauptsächlich mit zwei Erweiterungen der Restartautomaten: CD-Systeme von Restartautomaten und nichtvergessende Restartautomaten. Nichtvergessende Restartautomaten können einen Zyklus in einem beliebigen Zustand beenden und CD-Systeme von Restartautomaten bestehen aus einer Menge von Restartautomaten, die zusammen die Eingabe verarbeiten. Dabei wird ihre Zusammenarbeit durch einen Operationsmodus, ähnlich wie bei CD-Grammatik Systemen, geregelt. Für beide Erweiterungen zeigt sich, dass die deterministischen Modelle mächtiger sind als deterministische Standardrestartautomaten. Es wird gezeigt, dass CD-Systeme von Restartautomaten in vielen Fällen durch nichtvergessende Restartautomaten simuliert werden können und andererseits lassen sich auch nichtvergessende Restartautomaten durch CD-Systeme von Restartautomaten simulieren. Des Weiteren werden Restartautomaten und nichtvergessende Restartautomaten untersucht, die nichtdeterministisch sind, aber keine Fehler machen. Es zeigt sich, dass diese Automaten durch deterministische (nichtvergessende) Restartautomaten simuliert werden können, wenn sie direkt nach der Ersetzung einen neuen Zyklus beginnen, oder ihr Fenster nach links und rechts bewegen können. Außerdem gilt, dass alle (nichtvergessenden) Restartautomaten, die zwar Fehler machen dürfen, diese aber nach endlich vielen Zyklen erkennen, durch (nichtvergessende) Restartautomaten simuliert werden können, die keine Fehler machen. Ein weiteres wichtiges Resultat besagt, dass die deterministischen monotonen nichtvergessenden Restartautomaten mit Hilfssymbolen, die direkt nach dem Ersetzungsschritt den Zyklus beenden, genau die deterministischen kontextfreien Sprachen erkennen, wohingegen die deterministischen monotonen nichtvergessenden Restartautomaten mit Hilfssymbolen ohne diese Einschränkung echt mehr, nämlich die links-rechts regulären Sprachen, erkennen. Damit werden zum ersten Mal Restartautomaten mit Hilfssymbolen, die direkt nach dem Ersetzungsschritt ihren Zyklus beenden, von Restartautomaten desselben Typs ohne diese Einschränkung getrennt. Besonders erwähnenswert ist hierbei, dass beide Automatentypen wohlbekannte Sprachklassen beschreiben.