Influência do tipo de ácido e tempo de envelhecimento na atividade fotocatalítica de filmes finos de TiO2

TiO2 thin films were prepared by the sol-gel method using different acids (HCl and HAc), with a parallel evaluation of the gel ageing effects on the film properties. After the thermal treatments, the resulting materials were characterized through gravimetric analysis, UV-VIS spectrophotometry (from which optical parameters such as band gap was derived), XRD, morphological surface analysis (AFM) and photocatalytic activity. The majority of the obtained thin films parameters were similar independent of the acid type and the ageing time of the gel. Nevertheless, a visible effect of the surface morphology properties on the films and their photocatalytic activity was observed.

Measuring Brand Equity and Analyzing Its Relationship with Key Marketing Mix Elements

The aim of this paper is to analyze the effect of price and advertising on brand equity. The dimensionality of brand equity is thoroughly examined, and the effect price, price deals, perceived advertising spending and advertising appeal have on the dimensions of brand equity are analyzed using multiple regression analysis as well as other supporting analyses. Price and advertising are found to be of great importance to brand equity. Arguably the most influential finding is the strong positive effect low prices – an integral brand element – have on the case company brand equity, even though a negative effect was hypothesized based on prior research. The results also support separating advertising appeal from perceived advertising spending, as well as linking service quality as part of the overall perceived quality in the context of service-intensive firms.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

Customer knowledge processing in key account management

The ability of the supplier firm to generate and utilise customer-specific knowledge has attracted increasing attention in the academic literature during the last decade. It has been argued the customer knowledge should treated as a strategic asset the same as any other intangible assets. Yet, at the same time it has been shown that the management of customer-specific knowledge is challenging in practice, and that many firms are better at acquiring customer knowledge than at making use of it. This study examines customer knowledge processing in the context of key account management in large industrial firms. This focus was chosen because key accounts are demanding and complex. It is not unusual for a single key account relationship to constitute a complex web of relationships between the supplier and the key account – thus easily leading to the dispersion of customer-specific knowledge in the supplier firm. Although the importance of customer-specific knowledge generation has been widely acknowledged in the literature, surprisingly little attention has been paid to the processes through which firms generate, disseminate and use such knowledge internally for enhancing the relationships with their major, strategically important key account customers. This thesis consists of two parts. The first part comprises a theoretical overview and draws together the main findings of the study, whereas the second part consists of five complementary empirical research papers based on survey data gathered from large industrial firms in Finland. The findings suggest that the management of customer knowledge generated about and form key accounts is a three-dimensional process consisting of acquisition, dissemination and utilization. It could be concluded from the results that customer-specific knowledge is a strategic asset because the supplier’s customer knowledge processing activities have a positive effect on supplier’s key account performance. Moreover, in examining the determinants of each phase separately the study identifies a number of intra-organisational factors that facilitate the process in supplier firms. The main contribution of the thesis lies in linking the concept of customer knowledge processing to the previous literature on key account management. Moreover, given than this literature is mainly conceptual or case-based, a further contribution is to examine its consequences and determinants based on quantitative empirical data.

Energiatiedon hallintajärjestelmän suorituskyvyn määrittäminen ja todentaminen

Sähkömarkkinoiden vapautumisen jälkeen energia-alalle on muodostunut entistä suurempi kysyntä kehittyneille energiatiedon hallintaaan erikoistuneille tietojärjestelmille. Uudet lakisäädökset sekä tulevaisuuden kokonaisvaltaiset tiedonkeruujärjestelmät, kuten älykkäät mittarit ja älykkäät sähköverkot, tuovat mukanaan entistä suuremman prosessoitavan tietovirran. Nykyaikaisen energiatietojärjestelmän on kyettävä vastaamaan haasteeseen ja palveltava asiakkaan vaatimuksia tehokkaasti prosessien suorituskyvyn kärsimättä. Tietojärjestelmän prosessien on oltava myös skaalautuvia, jotta tulevaisuuden lisääntyneet prosessointitarpeet ovat hallittavissa. Tässä työssä kuvataan nykyaikaisen energiatietojärjestelmän keskeiset energiatiedon hallintaan ja varastointiin liittyvät komponentit. Työssä esitellään myös älykkäiden mittareiden perusperiaate ja niiden tuomat edut energia-alalla. Lisäksi työssä kuvataan visioita tulevaisuuden älykkäiden sähköverkkojen toteutusmahdollisuuksista. Diplomityössä esitellään keskeisiä suorituskykyyn liittyviä kokonaisuuksia. Lisäksi työssä kuvataan keskeiset suorituskyvyn mittarit sekä suorituskykyvaatimukset. Järjestelmän suorituskyvyn arvioinnin toteuttamiseen on erilaisia menetelmiä, joista tässä työssä kuvataan yksi sen keskeisine periaatteineen. Suorituskyvyn analysointiin käytetään erilaisia tekniikoita, joista tässä diplomityössä esitellään tarkemmin järjestelmän mittaus. Työssä toteutetaan myös case-tutkimus, jossa analysoidaan mittaustiedon sisääntuontiin käytettävän prosessin kahta eri kehitysversiota ja näiden suorituskykyominaisuuksia. Kehitysversioiden vertailussa havaitaan, että uusi versio on selkeästi edellistä versiota nopeampi. Case-tutkimuksessa määritetään myös suorituskyvyn kannalta optimaalinen rinnakkaisprosessien määrä ja tutkitaan prosessin skaalautuvuutta. Tutkimuksessa todetaan, että uusi kehitysversio skaalautuu lineaarisesti.

Tuotteen käytönaikaisen asiakastarvetiedon hyödyntäminen tuotekehitysprojekteissa

Diplomityö on tehty osana Sinfonet-tutkimusprojektia, ja sen tavoitteena on laatia uusi toimintamalli asiakaslähtöisen tuotekehitystoiminnan tehostamiseksi. Toimintamallin vaatimuksena oli asiakastarvetiedon kerääminen koko tuotteen elinkaaren käyttövaiheen ajalta, ja rinnakkainen prosessi asiakastarpeiden analysointiin sekä hyödyntämiseen. Työssä yhdistetään asiakastarpeiden kartoittamiseen, analysointiin ja hyödyntämiseen käytettävät menetelmät yhdeksi systemaattiseksi kokonaisuudeksi, jota Laroxin henkilöstö voi tehokkaasti käyttää työssään. Menetelmä laatittiin teoriaosuudessa havaittujen viitekehysten ja Laroxin avainhenkilöiden kanssa suoritettujen haastattelujen pohjalta. On ehdottoman tärkeätä, että toimintamallin käyttö ja siitä saavutettavat hyödyt saadaan perusteltua yrityksen henkilöstölle. Toimintamallissa asiakastarpeiden kartoitusmenetelmiksi valittiin AVAIN-ryhmähaastattelu sekä puolistrukturoitu haastattelu, ja analysointimenetelmiksi tulkintataulukko sekä QFD (Quality Function Deployment). Tarpeiden dokumentointiin valittiin tietokannaksi Laroxin käytössä jo valmiiksi oleva wiki-pohjainen Live-järjestelmä. Uusi toimintamalli ja siinä mukana olevat prosessit kuvataan diplomityössä yksityiskohtaisesti tietovirtakaaviona.

Key performance indicators for supplier and assortement evaluation

Tutkimuksen tavoite oli selvittää suorituskyvyn mittaamista, mittareita ja niiden suunnittelua tukku- ja jakeluliiketoiminnassa. Kriittisten menestystekijöiden mittarit auttavat yritystä kohti yhteistä päämäärää. Kriittisten menestystekijöiden mittarit ovat usein yhdistetty strategiseen suunnitteluun ja implementointiin ja niillä on yhtäläisyyksiä monien strategisten työkalujen kun Balanced scorecardin kanssa. Tutkimus ongelma voidaan esittää kysymyksen muodossa. •Mitkä ovat Oriola KD:n pitkänaikavälin tavoitteita tukevat kriittisten menestystekijöiden mittarit (KPIs) toimittajan ja tuotevalikoiman mittaamisessa? Tutkimus on jaettu kirjalliseen ja empiiriseen osaan. Kirjallisuus katsaus käsittelee aikaisempaa tutkimusta strategian, toimitusketjun hallinnan, toimittajan arvioinnin ja erilaisten suorituskyvyn mittaamisjärjestelmien osalta. Empiirinen osuus etenee nykytila-analyysista ehdotettuihin kriittisten menestystekijöiden mittareihin, jotka ovat kehitetty kirjallisuudesta löydetyn mallin avulla. Tutkimuksen lopputuloksena ovat case yrityksen tarpeisiin kehitetyt kriittisten menestystekijöiden mittarit toimittajan ja tuotevalikoiman arvioinnissa.

Permanent Magnet Synchronous Machine for Parallel Hybrid Vehicle

The aim of this thesis is to describe hybrid drive design problems, the advantages and difficulties related to the drive. A review of possible hybrid constructions, benefits of parallel, series and series-parallel hybrids is done. In the thesis analytical and finite element calculations of permanent magnet synchronous machines with embedded magnets were done. The finite element calculations were done using Cedrat’s Flux 2D software. This machine is planned to be used as a motor-generator in a low power parallel hybrid vehicle. The boundary conditions for the design were found from Lucas-TVS Ltd., India. Design Requirements, briefly: • The system DC voltage level is 120 V, which implies Uphase = 49 V (RMS) in a three phase system. • The power output of 10 kW at base speed 1500 rpm (Torque of 65 Nm) is desired. • The maximum outer diameter should not be more than 250 mm, and the maximum core length should not exceed 40 mm. The main difficulties which the author met were the dimensional restrictions. After having designed and analyzed several possible constructions they were compared and the final design selected. Dimensioned and detailed design is performed. Effects of different parameters, such as the number of poles, number of turns and magnetic geometry are discussed. The best modification offers considerable reduction of volume.

Key factors to inoculate Botrytis cinerea in tomato plants

Studies addressing the biological control of Botrytis cinerea have been unsuccessful because of fails in inoculating tomato plants with the pathogen. With the aim of establishing a methodology for inoculation into stems, experiments were designed to assess: i. the aggressiveness of pathogen isolates; ii. the age at which tomato plants should be inoculated; iii. the susceptibility of tissues at different stem heights; iv. the need for a moist chamber after inoculation; and v. the effectiveness of gelatin regarding inoculum adhesion. Infection with an isolate from tomato plants that was previously inoculated into petioles and then re-isolated was successful. An isolate from strawberry plants was also aggressive, although less than that from tomato plants. Tomato plants close to flowering, at 65 days after sowing, and younger, middle and apical stem portions were more susceptible. There was positive correlation between lesion length and sporulation and between lesion length and broken stems. Lesion length and the percentage of sporulation sites were reduced by using a moist chamber and were not affected by adding gelatin to the inoculum suspension. This methodology has been adopted in studies of B. cinerea in tomato plants showing reproducible results. The obtained results may assist researchers who study the gray mold.

Mobile learning and video experience in delivering digital content

In recent years, the worldwide distribution of smartphone devices has been growing rapidly. Mobile technologies are evolving fast, a situation which provides new possibilities for mobile learning applications. Along with new delivery methods, this development enables new concepts for learning. This study focuses on the effectiveness and experience of a mobile learning video promoting the key features of a specific device. Through relevant learning theories, mobile technologies and empirical findings, the thesis presents the key elements for a mobile learning video that are essential for effective learning. This study also explores how previous experience with mobile services and knowledge of a mobile handset relate to final learning results. Moreover, this study discusses the optimal delivery mechanisms for a mobile video. The target group for the study consists of twenty employees of a Sanoma Company. The main findings show that the individual experience of learning and the actual learning results may differ and that the design for certain video elements, such as sound and the presentation of technical features, can have an impact on the experience and effectiveness of a mobile learning video. Moreover, a video delivery method based on cloud technologies and HTML5 is suggested to be used in parallel with standalone applications.

Active inverter output filtering methods

Frequency converters are widely used in the industry to enable better controllability and efficiency of variable speed AC motor drives. Despite these advantages, certain challenges concerning the inverter and motor interfacing have been present for decades. As insulated gate bipolar transistors entered the market, the inverter output voltage transition rate significantly increased compared with their predecessors. Inverters operate based on pulse width modulation of the output voltage, and the steep voltage edge fed by the inverter produces a motor terminal overvoltage. The overvoltage causes extra stress to the motor insulation, which may lead to a prematuremotor failure. The overvoltage is not generated by the inverter alone, but also by the sum effect of the motor cable length and the impedance mismatch between the cable and the motor. Many solutions have been shown to limit the overvoltage, and the mainstream products focus on passive filters. This doctoral thesis studies an alternative methodology for motor overvoltage reduction. The focus is on minimization of the passive filter dimensions, physical and electrical, or better yet, on operation without any filter. This is achieved by additional inverter control and modulation. The studied methods are implemented on different inverter topologies, varying in nominal voltage and current.For two-level inverters, the studied method is termed active du/dt. It consists of a small output LC filter, which is controlled by an independent modulator. The overvoltage is limited by a reduced voltage transition rate. For multilevel inverters, an overvoltage mitigation method operating without a passive filter, called edge modulation, is implemented. The method uses the capability of the inverter to produce two switching operations in the same direction to cancel the oscillating voltages of opposite phases. For parallel inverters, two methods are studied. They are both intended for two-level inverters, but the first uses individual motor cables from each inverter while the other topology applies output inductors. The overvoltage is reduced by interleaving the switching operations to produce a similar oscillation accumulation as with the edge modulation. The implementation of these methods is discussed in detail, and the necessary modifications to the control system of the inverter are presented. Each method is experimentally verified by operating industrial frequency converters with the modified control. All the methods are found feasible, and they provide sufficient overvoltage protection. The limitations and challenges brought about by the methods are discussed.

Optimizing Customer Energy Invoice Calculation with Parallel Computation

Diplomityön tarkoituksena on optimoida asiakkaiden sähkölaskun laskeminen hajautetun laskennan avulla. Älykkäiden etäluettavien energiamittareiden tullessa jokaiseen kotitalouteen, energiayhtiöt velvoitetaan laskemaan asiakkaiden sähkölaskut tuntiperusteiseen mittaustietoon perustuen. Kasvava tiedonmäärä lisää myös tarvittavien laskutehtävien määrää. Työssä arvioidaan vaihtoehtoja hajautetun laskennan toteuttamiseksi ja luodaan tarkempi katsaus pilvilaskennan mahdollisuuksiin. Lisäksi ajettiin simulaatioita, joiden avulla arvioitiin rinnakkaislaskennan ja peräkkäislaskennan eroja. Sähkölaskujen oikeinlaskemisen tueksi kehitettiin mittauspuu-algoritmi.

Key performance indicators for successful metadata governance

Metadata in increasing levels of sophistication has been the most powerful concept used in management of unstructured information ever since the first librarian used the Dewey decimal system for library classifications. It remains to be seen, however, what the best approach is to implementing metadata to manage huge volumes of unstructured information in a large organization. Also, once implemented, how is it possible to track whether it is adding value to the company, and whether the implementation has been successful? Existing literature on metadata seems to either focus too much on technical and quality aspects or describe issues with respect to adoption for general information management initiatives. This research therefore, strives to contribute to these gaps: to give a consolidated framework for striving to understand the value added by implementing metadata. The basic methodology used is that of case study, which incorporates aspects of design science, surveys, and interviews in order to provide a holistic approach to quantitative and qualitative analysis of the case. The research identifies the various approaches to implementing metadata, particularly studying the one followed by the unit of analysis of case study, a large company in the Oil and Gas Sector. Of the three approaches identified, the selected company already follows an approach that appears to be superior. The researcher further explores its shortcomings, and proposes a slightly modified approach that can handle them. The research categorically and thoroughly (in context) identifies the top effectiveness criteria, and corresponding key performance indicators(KPIs) that can be measured to understand the level of advancement of the metadata management initiative in the company. In an effort to contrast and have a basis of comparison for the findings, the research also includes views from information managers dealing with core structured data stored in ERPs and other databases. In addition, the results include the basic criteria that can be used to evaluate metrics, in order to classify a metric as a KPI.

Dispersal and metacommunity dynamics in a soft-sediment benthic system : how well is the seafloor connected?

Connectivity depends on rates of dispersal between communities. For marine soft-sediment communities continued small-scale dispersal as post-larvae and as adults can be equally important in maintaining community composition, as initial recruitment of substrate by pelagic larvae. In this thesis post-larval dispersal strategies of benthic invertebrates, as well as mechanisms by which communities are connected were investigated. Such knowledge on dispersal is scarce, due to the difficulties in actually measuring dispersal directly in nature, and dispersal has not previously been quantified in the Baltic Sea. Different trap-types were used underwater to capture dispersing invertebrates at different sites, while in parallel measuring waves and currents. Local community composition was found to change predictably under varying rates of dispersal and physical connectivity (waves and currents). This response was, however, dependent on dispersal-related traits of taxa. Actively dispersing taxa will be relatively better at maintaining their position, as they are not as dependent on hydrodynamic conditions for dispersal and will be less prone to be passively transported by currents. Taxa also dispersed in relative proportions that were distinctly different from resident community composition and a significant proportion (40 %) of taxa were found to lack a planktonic larval life-stage. Community assembly was re-started in a large-scale manipulative field experiment over one year across several sites, which revealed how patterns of community composition (α-, β- and λ-diversity) change depending on rates of dispersal. Results also demonstrated that in response to small-scale disturbance, initial recruitment was by nearby-dominant species after which other species arrived from successively further away. At later assembly time, the number of coexisting species increased beyond what was expected purely by local niche requirements (species sorting), transferring regional differences in community composition (β-diversity) to the local scale (α-diversity, mass effect). Findings of this thesis complement more theoretical studies in metacommunity ecology by demonstrating that understanding how and when individuals disperse relative to underlying environmental heterogeneity is key to interpreting how patterns of diversity change across different spatial scales. Such information from nature is critical when predicting responses to, for example, different types of disturbances or management actions in conservation.