Plasmonic nanotips for on-chip nanoscale confinement of light

We demonstrate the on-chip nanoscale focusing of surface plasmons in metallic nanotip coupled to the silicon waveguide. Strong field enhancement is observed at the apex of the tip. Enhancing light matter interactions is discussed. © 2011 Optical Society of America.

On-chip focusing of light by Metallic Nanotip

We investigate numerically and experimentally the on-chip nanoscale focusing of surface plasmon polaritons (SPPs) in metallic nanotip coupled to the silicon waveguide. Strong field enhancement is observed at the apex of the tip. © 2010 Optical Society of America.

Mechanism on Effect of Surface Plasmons Coupling with InGaN/GaN Quantum Wells: Enhancement and Suppression of Photoluminescence Intensity

The photoluminescence (PL) intensity enhancement and suppression mechanism on surface plasmons (SPs) coupling with InGaN/GaN quantum wells (QWs) have been systematically studied. The SP-QW coupling behaviors in the areas of GaN cap layer coated with silver thin film were compared at different temperatures and excitation powers. It is found that the internal quantum efficiency (IQE) of the light emitting diodes (LEDs) varies with temperature and excitation power, which in turn results in anomalous emission enhancement and suppression tendency related to SP-QW coupling. The observation is explained by the balance between the extraction efficiency of SPs and the IQE of LEDs

Investigations on V-defects in quaternary AlInGaN epilayers

The characteristics of V-defects in quaternary AlInGaN epilayers and their correlation with fluctuations of the In distribution are investigated. The geometric size of the V-defects is found to depend on the In composition of the alloy. The V-defects are nucleated within the AlInGaN layer and associated with threading dislocations. Line scan cathodoluminescence (CL) shows a redshift of the emission peak and an increase of the half width of the CL spectra as the electron beam approaches the apex of the V-defect. The total redshift decreases with decreasing In mole fraction in the alloy samples. Although the strain reduction may partially contribute to the CL redshift, indium segregation is suggested to be responsible for the V-defect formation and has a main influence on the respective optical properties. (C) 2004 American Institute Of Physics.

Cathodoluminescence and Raman research of V-shape inverted pyramid in HVPE grown GaN film

Thick GaN films with high quality have been grown on (0001) sapphire substrate in a home-made vertical HVPE reactor. Micron-size hexagonal pits with inverted pyramid shape appear on the film surface, which have six triangular {10-11} facets. These I {10-11} facets show strong luminescence emission and are characteristic of doped n-type materials. Broad red emission is suppressed in {10-11} facets and is only found at the flat region out of the pit, which is related with the decreasing defects on {10-11} facets. Low CL emission intensity is observed at the apex of V-shape pits due to the enhanced nonradiative recombination. Raman spectra show that there are higher carrier concentration and low strain in the pit in comparison to the flat region out of the pit. The strain relaxation may be the main mechanism of the V-shape pits formation on the GaN film surface. (c) 2006 Elsevier B.V. All rights reserved.

Effect of Si overgrowth on the structural and luminescence properties of Ge islands on Si(100)

The effect of Si overgrowth on the structural and luminescence properties of strained Ge layer grown on Si(1 0 0) is studied. Capping Si leads to the dissolution of Ge island apex and reduced island height. The structural changes in island shape, especially in chemical composition during Si overgrowth have a large effect on the PL properties. The integrated PL intensity of Ge layer increases and there are large blue shifts in peak energies after capping Si. The PL spectra from buried Ge layer are consistent with type-II band alignment in SiGe/Si. We show that the PL properties from buried Ge layer may be tailored by modifying the cap layer growth conditions as well as post-growth annealing. (C) 1999 Elsevier Science B.V. All rights reserved.

Introduction to Molecular Analysis of Ectomycorrhizal Communities

A number of methods are available for those researchers considering the addition of molecular analyses of ectomycorrhizal (EcM) fungi to their research projects and weighing the various approaches they might take. Analyzing natural EcM fungal communities has traditionally been a highly skilled, time-consuming process relying heavily on exacting morphological characterization of EcM root tips. Increasingly powerful molecular methods for analyzing EcM communities make this area of research available to a much wider range of researchers. Ecologists can gain from the body of work characterizing EcM while avoiding the requirement for exceptional expertise by carefully combining elements of traditional methods with the more recent molecular approaches. A cursory morphological analysis can yield a traditional quantification of EcM fungi based on tip numbers, a unit with functional and historical significance. Ectomycorrhizal root DNA extracts may then be analyzed with molecular methods widely used for characterizing microbiota. These range from methods applicable only to the simple mixes resulting from careful morphotyping, to community-oriented methods that identify many types in mixed samples as well as provide an estimate of their relative abundances. Extramatrical hyphae in bulk soil can also be more effectively studied, extending characterization of EcM fungal communities beyond the rhizoplane. The trend toward techniques permitting larger sample sets without prohibitive labor and time requirements will also permit us to more frequently address the issues of spatial and temporal variability and better characterize the roles of EcM fungi at multiple scales.

Active site structure of NO decomposition on perovskite(-like) oxides: An investigation from experiment and density functional theory

Active site structure for NO decomposition carried out on perovskite-like oxides were discussed based on the N-2 yield measured from LaSrNi1-x,AlxO4 with different B-site cations and from La2-ySryCuO4 with different crystal phases. Results show that the active site contains two oxygen vacancies, two transition metals, and one lattice-oxygen, with the oxygen vacancy locating on the apex of MO6 octahedron, and the lattice oxygen locating between the two transition metals (i.e., M-O-M plane). Density functional theory (DFT) analysis to the structure shows that this new active site is the most active structure for NO adsorbing, and hence, for NO decomposition. The similar trend of the relative energies that are required for the formation of oxygen vacancies with f form (calculated from DFT), the amount of oxygen vacancies, and the activities (N-2 yield) certifies this result further.

A two-dimensional molybdenum (V) phosphate with covalently bonded transition metal coordination complexes: hydrothermal synthesis and structure characterization of Na-2[{Mn(phen)(2)(H2O)}{Mn(phen)(2)}(3){Mn (Mo12O24)-O-V (HPO4)(6)(PO4)(2)(OH)(6)}] center dot 4H(2)O (phen=1,10-phenanthroline)

An organic-inorganic hybrid molybdenum phosphate, Na-2[{Mn(phen)(2)(H2O)} {Mn(phen)(2)}(3){(MnMo12O24)-O-v (HPO4)(6)(PO4)(2) (OH)(6)}] . 4H(2)O (phen=1,10-phenanthroline), involving molybdenum present in V oxidation state and covalently bonded transition metal coordination complexes, has been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. Deep brown-red crystals are formed in the triclinic system, space group P (1) over bar, a=16.581(l)Angstrom, b=18.354(1)Angstrom, c=24.485(2)Angstrom, alpha=80.589(l)degrees, beta=71.279(1)degrees, gamma=67.084(1)degrees, V=6493.8(8)Angstrom(3), Z=2, lambda(MoKalpha)=0.71073Angstrom (R(F)=0.0686 for 29,053 reflections). Data were collected on a Bruker Smart Apex CCD diffractometer at 293 K in the range of 1.76 < theta < 28.06degrees using omega-2theta scans technique. The structure of the title compound may be considered to be based on {Mo6O12(HPO4)(3)(PO4)(OH)(3)} units bonded together with {Mn(phen)(2)} subunits into a two-dimensional network. Two types of tunnels are observed in the solid of the title compound.

朝鲜淫羊藿中生物碱类新成分的分离提取及结构鉴定

淫羊藿系小檗科淫羊藿属植物 ,具有补肾壮阳、强筋骨、祛风湿之功效 .现代药理研究表明 ,它还具有防治骨质疏松和提高免疫功能等作用 .2 0 0 0年版中国药典收载了 5种淫羊藿属植物 ,朝鲜淫羊藿为其中一种 ,是长白山道地中药材之一 .朝鲜淫羊藿中化学成分的研究多集中在黄酮类化合物方面 [1～ 6 ] ,而对其生物碱类化合物的研究较少 [7,8] .本文对朝鲜淫羊藿中生物碱类化合物进行了研究 ,并发现了一种新的生物碱 (6-羟基 -1 1 ,1 2 -二甲氧基 -2 ,2 -二甲基 -1 ,8-二氧 -1 ,3 ,4,8-四氢 -2 H -7-氧杂 -2 -氮 -苯并 [c]菲 ) ,采用核磁共振波谱技术鉴定了该化合物的结构 ,并用电喷雾多级串联质谱对其结构的正确性进行了验证 .1　实验部分1 .1　仪器　APEX FT-ICRMS高分辨质谱仪 (德国 Bruker Daltonnics公司 ) ;FTS-7型红外光谱仪(美国 BIO-RAD公司 ) ;AV40 0核磁共振波谱仪 (德国 Bruker公司 ) ,以 CDCl3作溶剂及内标 ;X-4数字显示显微熔点仪 (北京泰克仪器有限公司 ) ;MSn在 ...

Fabrication of nanometer-sized electrodes and tips for scanning electrochemical microscopy

A novel method for fabrication of nanometer-sized electrodes and tips suitable for scanning electrochemical microscopy (SECM) is reported. A fine etched Pt wire is coated with polyimide, which was produced by polymerization on the Pt surface initiated by heat. This method can prepare electrodes with effective radii varying from a few to hundreds of nanometers. Scanning electron microscopy, cyclic voltammetry, and SECM were used to characterize these electrodes. Well-defined steady-state voltammograms could be obtained in aqueous or in 1,2-dichloroethane solutions. Ibis method produced the nanoelectrodes with exposed Pit on the apex, and they can also be employed as the nanotips for SECM investigations. Different sizes of Pt nanotips made by this method were employed to evaluate the kinetics of the redox reaction of Ru(NH3)6(3+) on the surface of a large Pt electrode by SECM, and the standard rate constant kappa (o) of this system was calculated from the best fit of the SECM approach curve. This result is similar to the values obtained by analysis of the obtained voltammetric data.

Two new species of Naticidae (Mollusca, Gastropoda) from the coast of China

Two new species of Naticidae (Mollusca, Gastropoda) collected from the coast of China are described: Cryptonaitca huanghaiensis sp. nov. and Sinum. vittatum sp. nov. The morphological characteristics between the new species were described and the related information was provided. The similarities and differenees between the new species and related species were also compared and discussed. The new species Cryptonaitea huanghaiensis differed from Cryptonaitca hirasei and Cryptonaitca andoi in outer shape, operculum and radula. The new species Sinum, vittatum is similar to Sinum, japonicum (Lischke, 1869), but the shell of the former is flat-elliptical in shape, spire very small, slightly convex. While the latter is flat-globular in shape, apex light brown in color, without a brown band on the body whorl. The comparison results revealed that Cryptonaitca huanghaiensis and Sinum vittatum were two new species from the coast of China. Specimens studied were obtained from collections in the Marine Biological Museum, Chinese Academy of Sciences.

碳纳米管探针的制作方法研究

碳纳米管的小直径、高纵横比、高强度和高弹性、优良的耐磨损性能以及独特的电学和化学特性,使其成为高分辨率原子力显微镜的理想探针针尖。本文根据制作工艺的特点,综述现有碳纳米管探针的代表性研究和制作方法:组装式和生长式。组装式是通过手工、电场或磁场的方式将制备好的碳纳米管粘附到常规硅探针的末端;而生长式是在常规硅探针末端或悬臂梁上定点催化生长出一定直径和长度的CNT。最后指出这些方法目前存在的主要问题。

Os motivos da não erupção dos terceiros molares

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

The atom pencil: serial writing in the sub-micrometre domain

The atom pencil we describe here is a versatile tool that writes arbitrary structures by atomic deposition in a serial lithographic process. This device consists of a transversely laser-cooled and collimated cesium atomic beam that passes through a 4-pole atom-flux concentrator and impinges on to micron- and sub-micron-sized apertures. The aperture translates above a fixed substrate and enables the writing of sharp features with sizes down to 280 nm. We have investigated the writing and clogging properties of an atom pencil tip fabricated from silicon oxide pyramids perforated at the tip apex with a sub-micron aperture.