MOCVD生长Al_(0.48)Gao_(0.52)N/Al_(0.54)Ga_(0.36)N多量子阱的结构和光学特性

采用金属有机物化学气相淀积(MOCVD)技术,在蓝宝石衬底上生长了Al_(0.48)Gao_(0.52)N/Al_(0.54)Ga_(0.36)N多量子阱(MQWs)结构.通过双晶X射线衍射(DCXRD)、原子力显微镜(AFM)和阴极荧光(CL)等测试技术,分别对样品的结构和光学特性进行了表征.在DCXRD图谱中,可以观察到明显的MQWs衍射卫星峰,通过拟和,MQWs结构中阱和垒的厚度分别为2.1和9.4 nm,Al组分分别为0.48和0.54.在AFM表面形貌图上,可以观察到清晰的台阶流,表明MQWs获得了二维生长;与此同时,MQWs结构存在一些裂缝,主要原因为AlGaNMQWs结构和下层GaN层间存在很大的应力.CL测试表明,AlGaN MQWs结构的发光波长为295 nm,处于深紫外波段,同时观察到处于蓝光、绿光波段的缺陷发光.

In_(0.53)Ga_(0.47)As/In_(0.52)Al_(0.48)As量子阱中的正磁电阻效应

在低温强磁场条件下,对In_(0.53)Ga_(0.47)As/In_(0.52)Al_(0.48)As量子阱中的二维电子气进行了磁输运测试.在低磁场范围内观察到正磁电阻效应,在高磁场下这一正磁电阻趋于饱和,分析表明这一现象与二维电子气中的电子占据两个子带有关.在考虑了两个子带之间的散射效应后,通过分析低磁场下的正磁电阻,得到了每个子带电子的迁移率,结果表明第二子带电子的迁移率高于第一子带电子的迁移率.进一步分析表明,这主要是由两个子带之间的散射引起的.

两个子带占据的In_(0.53)Ga_(0.47)As/In_(0.52)Al_(0.48)As量子阱中填充因子的变化规律

研究了低温(1.5K)和强磁场(0-13T)条件下,InP基In_(0.53)Ga_(0.47)As/In_(0.52)A_(l0.48)As量子阱中电子占据两个子带时填充因子随磁场的变化规律.结果表明,在电子自旋分裂能远小于朗道能级展宽的情况下,如果两个子带分裂能是朗道分裂能的整数倍时,即⊿E_(21)=κ*ω_c(其中κ为整数),填充因子为偶数;当两个子带分裂能为朗道分裂能的半奇数倍时,即⊿E_(21)=(2κ+1*ω/2,填充因子出现奇数.

In_(0.53)Ga_(0.47)As/In_(0.52)Al_(0.48)As量子阱中双子带占据的二维电子气的输运特性

研究了不同沟道厚度的In_(0.53) Ga_(0.47)As/In_(0.52)Al_(0.48)As量子阱中双子带占据的二维电子气的输运特性.在考虑了两个子带电子之间的磁致子带间散射效应后,通过分析Shubnikov-de Haas振荡一阶微分的快速傅里叶变换结果,获得了每个子带电子的浓度、输运散射时间、量子散射时间以及子带之间的散射时间.结果表明,对于所研究的样品,第一子带电子受到的小角散射更强,这与第一子带电子受到了更强的电离杂质散射有关.

不同量子阱宽度的InP基In_(0.53)GaAs/In_(0.52)AlAs高电子迁移率晶体管材料二维电子气的性能研究

用Shubnikov-de Haas(SdH)振荡效应,研究了在1.4 K下不同量子阱宽度(10-35 nm)的InP基高电子迁移率晶体管材料的二维电子气特性.通过对纵向电阻SdH振荡的快速傅里叶变换分析,得到不同阱宽时量子阱中二维电子气各子带电子浓度和量子迁移率.研究发现,在Si掺杂浓度一定时,阱宽的改变对于量子阱中总的载流子浓度改变不大,但是随着阱宽的增加,阱中的电子从占据一个子带到占据两个子带,且第二子带上的载流子迁移率远大于第一子带迁移率.当量子阱宽度为20 nm时,处在第二子能级上的电子数与处在第一子能级上的电子数之比达到了最大值0.24.此时有最多的电子位于迁移率高的第二子能级,材料的迁移率也最大.此结果对于优化器件的设计有重要意义.

双δ掺杂In_(0.65)Ga_(0.35)As/In_(0.52)Al_(0.48)As赝型高迁移率晶体管材料子带电子特性研究

研究了基于InP基的In_(0.65)Ga_(0.35)As/In_(0.52)Al_(0.48)As赝型高迁移率晶体管材料中纵向磁电阻的Shubniko-de Haas (SdH)振荡效应和霍耳效应,通过对纵向磁电阻SdH振荡的快速傅里叶变换分析,获得了各子带电子的浓度,并因此求得了各子带能级相对于费米能级的位置.联立求解Schrodinger方程和Poisson方程,自洽计算了样品的导带形状、载流子浓度分布以及各子带能级和费米能级位置.理论计算和实验结果很好符合.实验和理论计算均表明,势垒层的掺杂电子几乎全部转移到了量子阱中,转移率在95%以上.

Observation of the resonant Raman behavior of individual single-walled carbon nanotubes

The different resonant Raman scattering process of single-walled carbon nanotubes (SWNTs) has been found between the Stokes and anti-Stokes sides of the radial breathing modes (RBMs), and this provides strong evidence that Raman spectra of some special diametric SWNTs are in resonance with their electronic transitions between the singularities in the one-dimensional electronic density of states in the valence and conduction bands, and other SWNTs axe beyond the resonant condition. Because of the coexistence of resonant and non-resonant Raman scattering processes for different diametric SWNTs, the relative intensity of each RBM does not reflect the proportion of a particular SWNT.

Summer monsoon intensity controls C-4/C-3 plant abundance during the last 35 ka in the Chinese Loess Plateau: Carbon isotope evidence from bulk organic matter and individual leaf waxes

IEECAS SKLLQG

Multi-strip MRPCs for FOPI

During the last years FOPI has developed a new ToF system as an upgrade of the existing detector based on Multi-strip Multi-gap Resistive Plate Chambers (MMRPCs). The intention is to increase the charged Kaon identification up to a laboratory momentum of 1 GeV/c and to enhance the azimuthal detector granularity. The new ToF barrel has an active area of 5 m(2) with 2400 individual strips (900 x 1.6 mm(2)) [A. Schuttauf, et al., Nucl. Phys. B 158 (2006) 52] which are read out on both sides by a custom designed electronics [M. Ciobanu, et al., IEEE Trans. Nucl. Sci. NS-54 (4) (2007) 1201; K. Koch, et al., IEEE Trans. Nucl. Sci. NS-52(3) (2005) 745]. To reach the envisaged goal a time resolution of 100 ps is needed, at a flight path of 1-1.3 m. Due to the rare production of the K- at SIS energies the efficiency of the MMRPCs has to be above 95%. We report on measurements with the detectors and electronics from the mass production line. For this purpose we used a proton beam at 2.0 and 1.25 GeV, at rates between 0.1 and 5 kHz/cm(2) to determine the timing, efficiency and rate capability of the MMRPCs

地理信息系统与基于个体的空间直观景观模型

In this paper,the development of Individual-based Spatial Explicit Landscape Model was outlined at first.Then several issues,pertaining to develop Individual-based Spatial Explicit Landscape Models,were discussed in details.And at last,the application perspectives of such models were illustrated,including animal movement,plant competition and landscape change.This study has relatively important significance guiding roles in developing Individual-based Spatial Explicit Landscape Model in our country and in landscape management.

Changes in individual plant traits and biomass allocation in alpine meadow with elevation variation on the Qinghai-Tibetan Plateau

Plant traits and individual plant biomass allocation of 57 perennial herbaceous species, belonging to three common functional groups (forbs, grasses and sedges) at subalpine (3700 m ASL), alpine (4300 m ASL) and subnival (>= 5000 m ASL) sites were examined to test the hypothesis that at high altitudes, plants reduce the proportion of aboveground parts and allocate more biomass to belowground parts, especially storage organs, as altitude increases, so as to geminate and resist environmental stress. However, results indicate that some divergence in biomass allocation exists among organs. With increasing altitude, the mean fractions of total biomass allocated to aboveground parts decreased. The mean fractions of total biomass allocation to storage organs at the subalpine site (7%+/- 2% S.E.) were distinct from those at the alpine (23%+/- 6%) and subnival (21%+/- 6%) sites, while the proportions of green leaves at all altitudes remained almost constant. At 4300 m and 5000 m, the mean fractions of flower stems decreased by 45% and 41%, respectively, while fine roots increased by 86% and 102%, respectively. Specific leaf areas and leaf areas of forbs and grasses deceased with rising elevation, while sedges showed opposite trends. For all three functional groups, leaf area ratio and leaf area root mass ratio decreased, while fine root biomass increased at higher altitudes. Biomass allocation patterns of alpine plants were characterized by a reduction in aboveground reproductive organs and enlargement of fine roots, while the proportion of leaves remained stable. It was beneficial for high altitude plants to compensate carbon gain and nutrient uptake under low temperature and limited nutrients by stabilizing biomass investment to photosynthetic structures and increasing the absorption surface area of fine roots. In contrast to forbs and grasses that had high mycorrhizal infection, sedges had higher single leaf area and more root fraction, especially fine roots.

Nanoelectrode ensembles based on semi-interpenetrating network of carbon nanotubes

A method for preparing nanoelectrode ensembles based on semi-interpenetrating network (SIN) of multi-walled carbon nanotubes (MWNTs) on gold electrode through phase-separation method is initially proposed. Individual nanoelectrode owns irregular three-dimensional MWNTs networks, which is denoted as SIN-MWNTs. On the as-prepared SIN-MWNTs nanoelectrode ensembles, the assembled MWNTs clusters in nanoscale serve as individual nanoelectrode and the electroinactive lipid networks located on the top of alkanethiol monolayer are used as a shielding layer. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), tapping-mode atomic force microscopy (TM-AFM) and scanning electron microscopy (SEM) were used to characterize the as-prepared SIN-MWNT nanoelectrode ensembles. Experimental results indicate that the well-defined nanoelectrode ensembles were prepared through self-assembly technology. Meantime, sigmoid curves in a wide scanning range can be obtained in CV experiments. This study may pave the way for the construction of truly nanoscopic nanoelectrode arrays by bottom-up strategy.