Comparative performance of the stable isotope signatures of carbon, nitrogen and oxygen in assessing early vigour and grain yield in durum wheat

The present paper studied the performance of the stable isotope signatures of carbon (δ13C), nitrogen (δ15N) and oxygen (δ18O) in plants when used to assess early vigour and grain yield (GY) in durum wheat growing under mild and moderate Mediterranean stress conditions. A collection of 114 recombinant inbred lines was grown under rainfed (RF) and supplementary irrigation (IR) conditions. Broad sense heritabilities (H2) for GY and harvest index (HI) were higher under RF conditions than under IR. Broad sense heritabilities for δ13C were always above 0·60, regardless of the plant part studied, with similar values for IR and RF trials. Some of the largest genetic correlations with GY were those shown by the δ13C content of the flag leaf blade and mature grains. Under both water treatments, mature grains showed the highest negative correlations between δ13C and GY across genotypes. Flag leaf δ13C was negatively correlated with GY only under RF conditions. The δ13C in seedlings was negatively correlated, under IR conditions only, with GY but also with early vigour. The sources of variation in early vigour were studied by stepwise analysis using the stable isotope signatures measured in seedlings. The δ13C was able to explain almost 0·20 of this variation under RF, but up to 0·30 under IR. In addition, nitrogen concentration in seedlings accounted for another 0·05 of variation, increasing the amount explained to 0·35. The sources of variation in GY were also studied through stable isotope signatures and biomass of different plant parts: δ13C was always the first parameter to appear in the models for both water conditions, explaining c. 0·20 of the variation. The second parameter (δ15N or N concentration of grain, or biomass at maturity) depended on the water conditions and the plant tissue being analysed. Oxygen isotope composition (δ18O) was only able to explain a small amount of the variation in GY. In this regard, despite the known and previously described value of δ13C as a tool in breeding, δ15N is confirmed as an additional tool in the present study. Oxygen isotope composition does not seem to offer any potential, at least under the conditions of the present study.

Production Cycle Optimization: Defining the Market Potential for a New Planning Tool

An optimization tool has been developed to help companies to optimize their production cycles and thus improve their overall supply chain management processes. The application combines the functionality that traditional APS (Advanced Planning System) and ARP (Automatic Replenishment Program) systems provide into one optimization run. A qualitative study was organized to investigate opportunities to expand the product’s market base. Twelve personal interviews were conducted and the results were collected in industry specific production planning analyses. Five process industries were analyzed to identify the product’s suitability to each industry sector and the most important product development areas. Based on the research the paper and the plastic film industries remain the most potential industry sectors at this point. To be successful in other industry sectors some product enhancements would be required, including capabilities to optimize multiple sequential and parallel production cycles, handle sequencing of complex finishing operations and to include master planning capabilities to support overall supply chain optimization. In product sales and marketing processes the key to success is to find and reach the people who are involved directly with the problems that the optimization tool can help to solve.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

Developing a Comprehensive Model for Marketing Planning — Combining the Major Approaches

Mix marketing and relationships marketing are two major approaches that often form a basis for organizational marketing planning. The superiority of these approaches has been debated for long without any rational conclusion. Lately there have been studies indicating that both of the major approaches are many times used side by side in marketing planning. There have been also studies suggesting that even combining the mix marketing and relationship marketing approaches might be possible. The aim of this thesis is to provide knowledge about the usage of mix marketing and relationship marketing approaches in organizations and possibilities in combining the approaches. Also a settlement of strengths, weaknesses and risks of combining is intended to provide. The objectives were met through the literature and a case study research. In the case study, interviews were conducted in order to gain a deeper knowledge about marketing planning in various organizations. Based on this study, the combining of the major marketing approaches will be possible and even recommended when keeping in mind few aspects which might cause some troubles in the combining process.

The relationship between first-order capabilities and online innovations. A comparative case study on the publishing sector.

The objective of this thesis was to study the relationship between firstorder capabilities and online innovations. First-order capabilities can be divided into market and technology capabilities, and they play an important role in the production of innovations. The study was carried out in publishing industry, where many changes have taken place in the online environment during the last few years. In the empirical research, four companies were studied, two magazine publishers and two newspaper publishers. The analysis was done in two phases; first every case was analyzed alone and then the cases were compared in cross-case analysis. The most important finding was the positive impact of market capability to the production of online innovations. The study also increased understanding about the relationship between market and technology capabilities and online innovations in general.

A Comparative Study of the Effectiveness of a Prefabricated Appliance and a Stabilization Appliance in the Treatment of Myofascial pain and Headache

The aim of this thesis was to evaluate the short- and long-term effectiveness of a prefabricated occlusal appliance (R) on patients with myofascial pain and headache by comparing it with the treatment of the stabilization appliance (S). Another aim was to evaluate the effect of appliance treatment on stress-related salivary parameters like cortisol and IgA, as well as on flow rate values in these patients. Sixty-five patients diagnosed with myofascial temporomandibular disorder (TMD) pain, of whom 94% suffered concomitantly from headache, at two centres for Stomatognathic Physiology, one in Sweden and one in Finland, were included in this randomized controlled trial using Research Diagnostic Criteria for TMD (RDC/TMD), with history questionnaires and clinical examinations performed at baseline and at 6- and 10-weeks, and 6- and 12-month follow-ups. Patients were randomly assigned either to the R or the S group. Treatment outcome was measured according to IMMPACT (Initiative on Methods, Measurements, and Pain Assessment in Clinical Trials), i.e. four chronic pain outcome domains: pain intensity, overall improvement, physical and emotional functioning. Changes in frequency and intensity of headache were recorded. Thirty-nine patients participated in the saliva study. Salivary analyses were performed at 6 and 10 weeks. The results revealed no differences between groups at baseline. At all follow-ups, all four outcome measures, as well as frequency and intensity of headache, showed statistically significant within-group improvement compared to baseline, without significant differences between groups. No treatment-induced changes in saliva parameters could be registered. In conclusion, the effectiveness of the prefabricated appliance seemed to be similar to that of the stabilization appliance in alleviating myofascial pain, and frequency and intensity of headache, in the short as well as the long term. However, no changes in salivary parameters were observed during treatment.

Researching Manufacturing Planning and Control system and Master Scheduling in a manufacturing firm.

The objective of this thesis is to research Manufacturing Planning and Control (MPC) system and Master Scheduling (MS) in a manufacturing firm. The study is conducted at Ensto Finland Corporation, which operates on a field of electrical systems and supplies. The paper consists of theoretical and empirical parts. The empirical part is based on weekly operating at Ensto and includes inter-firm material analysis, learning and meetings. Master Scheduling is an important module of an MPC system, since it is beneficial on transforming strategic production plans based on demand forecasting into operational schedules. Furthermore, capacity planning tools can remarkably contribute to production planning: by Rough-Cut Capacity Planning (RCCP) tool, a MS plan can be critically analyzed in terms of available key resources in real manufacturing environment. Currently, there are remarkable inefficiencies when it comes to Ensto’s practices: the system is not able to take into consideration seasonal demand and react on market changes on time; This can cause significant lost sales. However, these inefficiencies could be eliminated through the appropriate utilization of MS and RCCP tools. To utilize MS and RCCP tools in Ensto’s production environment, further testing in real production environment is required. Moreover, data accuracy, appropriate commitment to adapting and learning the new tools, and continuous developing of functions closely related to MS, such as sales forecasting, need to be ensured.

A comparative study of four tree species used in riparian forest restoration along Uruguay River, Brazil

Silvicultural and ecological knowledge about tree species is basic to restoration planning, particularly in high diversity regions. Here we present a comparison of four native tree species from the middle Uruguay River basin, Brazil-Argentine frontier: Heliocarpus americanus L. (Malvaceae), Maclura tinctoria (L.) D. Don ex Steud. (Moraceae), Schinus terebinthifolius Raddi (Anacardiaceae) and Cordia trichotoma (Vell.) Arrab. ex Steud. (Boraginaceae). We obtained data on initial growth, light interception, litterfall and litter mineral contents. H. americanus presented the greatest height and the lowest value of height/crown width ratio. H. americanus and M. tinctoria presented the highest light interception rate (>94 %) and highest litterfall (879 ± 151 and 792 ± 164 g·m-2·year-1, respectively). For the set of species, the lowest litterfall occurred between July and September. H. americanus presented the highest K concentration (1.13%) in the litter, while C. trichotoma had the highest values of Ca and Mg (6.35 and 2.02 %, respectively). S. terebinthifolius had the lowest light interception rate and litter mineral content.

Suomen ja Viron tehtaiden välisen uistinliiketoiminnan suorituskyvyn ja kannattavuuden kasvattaminen

Tämän tutkimuksen tavoitteena oli selvittää Päijät-Hämeessä toimivan uistimia valmistavan tehdasyksikön sekä saman konsernin Virossa toimivan tehdasyksikön välisen uistinliiketoiminnan kannattavuuden ja suorituskyvyn mahdollinen kasvattaminen. Konsernilla on käytössään kannattavan kasvun strategia, johon tämäkin yksi liiketoiminnan kehittämishankekin omalta osaltaan myös tähtää. Kannattavuutta tarkasteltiin tehtaiden välisen päätoimialan ja sen tuottavuuden ja suorituskyvyn näkökulmasta. Työssä on lähdetty rakentamaan tehtaiden väliselle uistinliiketoiminnalle uudenlaista mittaristoa operationaalisen johdon käyttöön. Suorituskykymittaristossa otetaan huomioon suunnittelutiimin avulla määritellyt avainmittarien osa-alueet ja niiden kehittäminen tulevaisuudessa. Työ käsittelee myös hieman toimipisteissä tapahtuvan muutosten hallitsemista sekä kehittävän ilmapiirin kasvattamista. Tässä tutkimuksessa havaittiin, että suorituskyvyn mittaamisesta oli hyötyä niin operationaaliselle toimipaikkakohtaiselle johdolle kuin tuotannon työntekijällekin. Tehtaiden välisestä suorituskyvystä saatiin vertailevaa tietoa, jota voidaan käyttää hyödyksi tulevaisuudessa. Tulevaisuudessa tästä järjestelmästä saatava tieto helpottaa tuotantolaitoksissa tapahtuvaa työvaiheiden kokonaisvaltaista prosessointia josta kuitenkin pitkällä tähtäimellä suurimmat kustannussäästöt tulevat yritykselle.

Computational modeling for irrigated agriculture planning. Part II: risk analysis

Techniques of evaluation of risks coming from inherent uncertainties to the agricultural activity should accompany planning studies. The risk analysis should be carried out by risk simulation using techniques as the Monte Carlo method. This study was carried out to develop a computer program so-called P-RISCO for the application of risky simulations on linear programming models, to apply to a case study, as well to test the results comparatively to the @RISK program. In the risk analysis it was observed that the average of the output variable total net present value, U, was considerably lower than the maximum U value obtained from the linear programming model. It was also verified that the enterprise will be front to expressive risk of shortage of water in the month of April, what doesn't happen for the cropping pattern obtained by the minimization of the irrigation requirement in the months of April in the four years. The scenario analysis indicated that the sale price of the passion fruit crop exercises expressive influence on the financial performance of the enterprise. In the comparative analysis it was verified the equivalence of P-RISCO and @RISK programs in the execution of the risk simulation for the considered scenario.

Strike hard, strike sure - Operation Musketeer : British military planning during the Suez Crisis, 1956

Operation Musketeer, a combined joint Anglo-French operation aimed at regaining control of the Suez Canal in 1956, has received much attention from scholars. The most common approach to the crisis has been to examine the political dimension. The political events that led Prime Minister Anthony Eden’s cabinet to decide to use military force against the wishes of their superior American ally and in the face of American economic pressure and a Soviet threat to attack Paris and London with rockets have been analysed thoroughly. This is particularly the case because the ceasefire and eventual withdrawal were an indisputable defeat of British policy in the Middle East. The military operation not only ruined Prime Minister Eden’s career, but it also diminished the prestige of Britain. It was the beginning of the end, some claim. The British Empire would never be the same. As the consequences of using force are generally considered more important than the military operations themselves, very little attention has been paid to the military planning of Operation Musketeer. The difference between the number of publications on Operation Corporate of the Falklands War and Operation Musketeer is striking. Not only has there been little previous research on the military aspects of Musketeer, the conclusions drawn in the existing works have not reached a consensus. Some historians, such as Correlli Barnett, compare Musketeer to the utter failures of the Tudor landings and Gallipoli. Among significant politicians, Winston Churchill, who had retired from the prime ministership only a year before the Suez Crisis, described the operation as “the most ill-conceived and ill-executed imaginable”. Colin McInnes, a well-known author on British defence policy, represents the middle view when he describes the execution as “far from failure”. Finally, some, like Julian Thompson, the Commander of 3 Commando Brigade during the Falklands War, rate the military action itself as being successful. The interpretation of how successful the handling of the Suez Crisis was from the military point of view depends very much on the approach taken and the areas emphasised in the subject. Frequently, military operations are analysed in isolation from other events. The action of a country’s armed forces is separated from the wider context and evaluated without a solid point of comparison. Political consequences are often used as validated criteria, and complicated factors contributing to military performance are ignored. The lack of comprehensive research on the military action has left room for an analysis concentrating on the military side of the crisis.

Comparative analysis of different meat traceability systems using multiple criteria and a social network approach

The adoption of a proper traceability system is being incorporated into meat production practices as a method of gaining consumer confidence. The various partners operating in the chain of meat production can be considered a social network, and they have the common goal of generating a communication process that can ensure each characteristic of the product, including safety. This study aimed to select the most appropriate meat traceability system “from farm to fork” that could be applied to Brazilian beef and pork production for international trade. The research was done in three steps. The first used the analytical hierarchy process (AHP) for selecting the best on-farm livestock traceability. In the second step, the actors in the meat production chain were identified to build a framework and defined each role in the network. In the third step, the selection of the traceability system was done. Results indicated that with an electronic traceability system, it is possible to acquire better connections between the links in the chain and to provide the means for managing uncertainties by creating structures that facilitate information flow more efficiently.

The effectiveness of financial innovation support tools. Comparative study of Latvia and Finland

In the Innovation Union Scoreboard of 2011, Latvia ranked last amongst the EU countries in innovation performance. Even though there is sufficient scientific and technological basis, the results remain modest or low in most of the indicators concerning innovations. Several aspects influence the performance a national innovation system. In Latvia, the low effectiveness is often attributed to lack of financial support tools. As a comparison, Finland was chosen because of its well-established and documented innovation system. The aim of this study is to research the efficiency and effectiveness of the current financial innovation support tool system in Latvia from the point of view of an innovating company. It also attempts to analyze the support tool system of Latvia and compare to the relevant parts of the Finnish system. The study found that it is problematic for innovative companies in Latvia to receive the necessary funding especially for start-ups and SMEs due to the low number of grant programs, funds and lacking offer from banks, venture capital and business angels. To improve the situation, the Latvian government should restructure the funding mechanisms putting a bigger emphasis on innovative start-ups and SMEs. That would lay a foundation for future growth and boost research and scientific activities in Latvia.

THE ROLE OF INFORMATION TECHNOLOGY IN CREATING SUSTAINABILITY VALUE FOR FINANCIAL INSTITUTIONS IN 2020 : a scenario planning approach

The growing importance of global sustainability issues has been causing many changes to the financial services industry. Facts such as climate change, social development and the financial crisis in 2008 have been making banks reconsider the manner that they consider environmental, social and economic factors in their decision-making process. At the same time, information technology (IT) has been transforming the financial service industry and its fast development has casted doubts on the way it should be managed within an organization. This current changing environment brings a number of uncertainties to the future that cannot be addressed using traditional forecasting techniques. This research investigates how IT can bring value to sustainability in the financial service industry in 2020. Through the use of a scenario planning technique, we analyzed how trends in the current environment (considering the relation between sustainability, financial institutions an IT) can lead to four different future scenarios. Then, we discussed how IT can improve a bank’s sustainability performance, considering the limitations of each scenario.

Imaging of Tumour Microenvironment for the Planning of Oncological Therapies Using Positron Emission Tomography

Tumour cells differ from normal tissue cells in several important ways. These differences, like for example changed energy metabolism, result in altered microenvironment of malignant tumours. Non-invasive imaging of tumour microenvironment has been at the centre of intense research recently due to the important role that this changed environement plays in the development of malignant tumours and due to the role it plays in the treatment of these tumours. In this respect, perhaps the most important characteristics of the tumour microenvironment from this point of view are the lack of oxygen or hypoxia and changes in blood flow (BF). The purpose of this thesis was to investigate the processes of energy metabolism, BF and oxygenation in head and neck cancer and pancreatic tumours and to explore the possibilities of improving the methods for their quantification using positron emission tomography (PET). To this end [18F]EF5, a new PET tracer for detection of tumour hypoxia was investigated. Favourable uptake properties of the tracer were observed. In addition, it was established that the uptake of this tracer does not correlate with the uptake of existing tracers for the imaging of energy metabolism and BF, so the information about the presence of tissue hypoxia cannot therefore be obtained using tracers such as [18F]FDG or [15O]H2O. These results were complemented by the results of the follow-up study in which it was shown that the uptake of [18F]EF5 in head and neck tumours prior to treatment is also associated with the overall survival of the patients, indicating that tumour hypoxia is a negative prognostic factor and might be associated with therapeutic resistance. The influences of energy metabolism and BF on the survival of patients with pancreatic cancer were investigated in the second study. The results indicate that the best predictor of survival of patients with pancreatic cancer is the relationship between energy metabolism and BF. These results suggest that the cells with high metabolic activity in a hypoperfused tissue have the most aggressive phenotype.