Mechanical Testing of Indirect Composite Materials Directly Applied on Implant Abutments

Purpose: To test the strength to failure and fracture mode of three indirect composite materials directly applied onto Ti-6Al-4V implant abutments vs cemented standard porcelain-fused-to-metal (PFM) crowns. Materials and Methods: Sixty-four locking taper abutments were randomly allocated to four groups and were cleaned in ethanol in an ultrasonic bath for 5 min. After drying under ambient conditions, the abutments were grit blasted and a custom 4-cusp molar crown mold was utilized to produce identical crowns (n = 16 per group) of Tescera (Bisco), Ceramage (Shofu), and Diamond Crown (DRM) according to the manufacturer`s instructions. The porcelain-fused-to-metal crowns were fabricated by conventional means involving the construction and a wax pattern and casting of a metallic coping followed by sintering of increasing layers of porcelain. All crowns were loaded to failure by an indenter placed at one of the cusp tips at a 1 mm/min rate. Subsequently, fracture analysis was performed by means of stereomicroscopy and scanning electron microscopy. One-way ANOVA at 95% level of significance was utilized for statistical analysis. Results: The single load to failure (+/- SD) results were: Tescera (1130 +/- 239 N), Ceramage (1099 +/- 257 N), Diamond Crown (1155 +/- 284 N), and PFM (1081 +/- 243 N). Stereomicroscopy analysis showed two distinct failure modes, where the loaded cusp failed either with or without abutment/metallic coping exposure. SEM analysis of the fractures showed multiple crack propagation towards the cervical region of the crown below a region of plastic deformation at the indenter contact region. Conclusion: The three indirect composites and PFM systems fractured at loads higher than those typically associated with normal occlusal function. Although each material had a different composition and handling technique, no significant differences were found concerning their single load to fracture resistance among composite systems and PFM.

Olfaction in the Queensland fruit fly, Bactrocera tryoni. II: Response spectra and temporal encoding characteristics of the carbon dioxide receptors

Single-unit electrophysiology was used to record the nerve impulses from the carbon dioxide receptors of female Queensland fruit flies, Bactrocera tryoni. The receptors responded to stimulation in a phasic-tonic manner and also had a period of inhibition of the nerve impulses after the end of stimulation, at high stimulus intensities. The cell responding to carbon dioxide was presented with a range of environmental odorants and found to respond to methyl butyrate and 2-butanone. The coding characteristics of the carbon dioxide cell and the ability to detect other odorants are discussed, with particular reference to the known behavior of the fly.

A relação dos pais com o ensino pré-escolar: representações e envolvimento no jardim-de-infância dos seus filhos

Dissertação de Mestrado, Psicologia da Educação (Contextos Educativos), 12 de Novembro de 2010, Universidade dos Açores.

Species distribution models for conservation-oriented studies in Switzerland : filling data and tools gaps

SUMMARYSpecies distribution models (SDMs) represent nowadays an essential tool in the research fields of ecology and conservation biology. By combining observations of species occurrence or abundance with information on the environmental characteristic of the observation sites, they can provide information on the ecology of species, predict their distributions across the landscape or extrapolate them to other spatial or time frames. The advent of SDMs, supported by geographic information systems (GIS), new developments in statistical models and constantly increasing computational capacities, has revolutionized the way ecologists can comprehend species distributions in their environment. SDMs have brought the tool that allows describing species realized niches across a multivariate environmental space and predict their spatial distribution. Predictions, in the form of probabilistic maps showing the potential distribution of the species, are an irreplaceable mean to inform every single unit of a territory about its biodiversity potential. SDMs and the corresponding spatial predictions can be used to plan conservation actions for particular species, to design field surveys, to assess the risks related to the spread of invasive species, to select reserve locations and design reserve networks, and ultimately, to forecast distributional changes according to scenarios of climate and/or land use change.By assessing the effect of several factors on model performance and on the accuracy of spatial predictions, this thesis aims at improving techniques and data available for distribution modelling and at providing the best possible information to conservation managers to support their decisions and action plans for the conservation of biodiversity in Switzerland and beyond. Several monitoring programs have been put in place from the national to the global scale, and different sources of data now exist and start to be available to researchers who want to model species distribution. However, because of the lack of means, data are often not gathered at an appropriate resolution, are sampled only over limited areas, are not spatially explicit or do not provide a sound biological information. A typical example of this is data on 'habitat' (sensu biota). Even though this is essential information for an effective conservation planning, it often has to be approximated from land use, the closest available information. Moreover, data are often not sampled according to an established sampling design, which can lead to biased samples and consequently to spurious modelling results. Understanding the sources of variability linked to the different phases of the modelling process and their importance is crucial in order to evaluate the final distribution maps that are to be used for conservation purposes.The research presented in this thesis was essentially conducted within the framework of the Landspot Project, a project supported by the Swiss National Science Foundation. The main goal of the project was to assess the possible contribution of pre-modelled 'habitat' units to model the distribution of animal species, in particular butterfly species, across Switzerland. While pursuing this goal, different aspects of data quality, sampling design and modelling process were addressed and improved, and implications for conservation discussed. The main 'habitat' units considered in this thesis are grassland and forest communities of natural and anthropogenic origin as defined in the typology of habitats for Switzerland. These communities are mainly defined at the phytosociological level of the alliance. For the time being, no comprehensive map of such communities is available at the national scale and at fine resolution. As a first step, it was therefore necessary to create distribution models and maps for these communities across Switzerland and thus to gather and collect the necessary data. In order to reach this first objective, several new developments were necessary such as the definition of expert models, the classification of the Swiss territory in environmental domains, the design of an environmentally stratified sampling of the target vegetation units across Switzerland, the development of a database integrating a decision-support system assisting in the classification of the relevés, and the downscaling of the land use/cover data from 100 m to 25 m resolution.The main contributions of this thesis to the discipline of species distribution modelling (SDM) are assembled in four main scientific papers. In the first, published in Journal of Riogeography different issues related to the modelling process itself are investigated. First is assessed the effect of five different stepwise selection methods on model performance, stability and parsimony, using data of the forest inventory of State of Vaud. In the same paper are also assessed: the effect of weighting absences to ensure a prevalence of 0.5 prior to model calibration; the effect of limiting absences beyond the environmental envelope defined by presences; four different methods for incorporating spatial autocorrelation; and finally, the effect of integrating predictor interactions. Results allowed to specifically enhance the GRASP tool (Generalized Regression Analysis and Spatial Predictions) that now incorporates new selection methods and the possibility of dealing with interactions among predictors as well as spatial autocorrelation. The contribution of different sources of remotely sensed information to species distribution models was also assessed. The second paper (to be submitted) explores the combined effects of sample size and data post-stratification on the accuracy of models using data on grassland distribution across Switzerland collected within the framework of the Landspot project and supplemented with other important vegetation databases. For the stratification of the data, different spatial frameworks were compared. In particular, environmental stratification by Swiss Environmental Domains was compared to geographical stratification either by biogeographic regions or political states (cantons). The third paper (to be submitted) assesses the contribution of pre- modelled vegetation communities to the modelling of fauna. It is a two-steps approach that combines the disciplines of community ecology and spatial ecology and integrates their corresponding concepts of habitat. First are modelled vegetation communities per se and then these 'habitat' units are used in order to model animal species habitat. A case study is presented with grassland communities and butterfly species. Different ways of integrating vegetation information in the models of butterfly distribution were also evaluated. Finally, a glimpse to climate change is given in the fourth paper, recently published in Ecological Modelling. This paper proposes a conceptual framework for analysing range shifts, namely a catalogue of the possible patterns of change in the distribution of a species along elevational or other environmental gradients and an improved quantitative methodology to identify and objectively describe these patterns. The methodology was developed using data from the Swiss national common breeding bird survey and the article presents results concerning the observed shifts in the elevational distribution of breeding birds in Switzerland.The overall objective of this thesis is to improve species distribution models as potential inputs for different conservation tools (e.g. red lists, ecological networks, risk assessment of the spread of invasive species, vulnerability assessment in the context of climate change). While no conservation issues or tools are directly tested in this thesis, the importance of the proposed improvements made in species distribution modelling is discussed in the context of the selection of reserve networks.RESUMELes modèles de distribution d'espèces (SDMs) représentent aujourd'hui un outil essentiel dans les domaines de recherche de l'écologie et de la biologie de la conservation. En combinant les observations de la présence des espèces ou de leur abondance avec des informations sur les caractéristiques environnementales des sites d'observation, ces modèles peuvent fournir des informations sur l'écologie des espèces, prédire leur distribution à travers le paysage ou l'extrapoler dans l'espace et le temps. Le déploiement des SDMs, soutenu par les systèmes d'information géographique (SIG), les nouveaux développements dans les modèles statistiques, ainsi que la constante augmentation des capacités de calcul, a révolutionné la façon dont les écologistes peuvent comprendre la distribution des espèces dans leur environnement. Les SDMs ont apporté l'outil qui permet de décrire la niche réalisée des espèces dans un espace environnemental multivarié et prédire leur distribution spatiale. Les prédictions, sous forme de carte probabilistes montrant la distribution potentielle de l'espèce, sont un moyen irremplaçable d'informer chaque unité du territoire de sa biodiversité potentielle. Les SDMs et les prédictions spatiales correspondantes peuvent être utilisés pour planifier des mesures de conservation pour des espèces particulières, pour concevoir des plans d'échantillonnage, pour évaluer les risques liés à la propagation d'espèces envahissantes, pour choisir l'emplacement de réserves et les mettre en réseau, et finalement, pour prévoir les changements de répartition en fonction de scénarios de changement climatique et/ou d'utilisation du sol. En évaluant l'effet de plusieurs facteurs sur la performance des modèles et sur la précision des prédictions spatiales, cette thèse vise à améliorer les techniques et les données disponibles pour la modélisation de la distribution des espèces et à fournir la meilleure information possible aux gestionnaires pour appuyer leurs décisions et leurs plans d'action pour la conservation de la biodiversité en Suisse et au-delà. Plusieurs programmes de surveillance ont été mis en place de l'échelle nationale à l'échelle globale, et différentes sources de données sont désormais disponibles pour les chercheurs qui veulent modéliser la distribution des espèces. Toutefois, en raison du manque de moyens, les données sont souvent collectées à une résolution inappropriée, sont échantillonnées sur des zones limitées, ne sont pas spatialement explicites ou ne fournissent pas une information écologique suffisante. Un exemple typique est fourni par les données sur 'l'habitat' (sensu biota). Même s'il s'agit d'une information essentielle pour des mesures de conservation efficaces, elle est souvent approximée par l'utilisation du sol, l'information qui s'en approche le plus. En outre, les données ne sont souvent pas échantillonnées selon un plan d'échantillonnage établi, ce qui biaise les échantillons et par conséquent les résultats de la modélisation. Comprendre les sources de variabilité liées aux différentes phases du processus de modélisation s'avère crucial afin d'évaluer l'utilisation des cartes de distribution prédites à des fins de conservation.La recherche présentée dans cette thèse a été essentiellement menée dans le cadre du projet Landspot, un projet soutenu par le Fond National Suisse pour la Recherche. L'objectif principal de ce projet était d'évaluer la contribution d'unités 'd'habitat' pré-modélisées pour modéliser la répartition des espèces animales, notamment de papillons, à travers la Suisse. Tout en poursuivant cet objectif, différents aspects touchant à la qualité des données, au plan d'échantillonnage et au processus de modélisation sont abordés et améliorés, et leurs implications pour la conservation des espèces discutées. Les principaux 'habitats' considérés dans cette thèse sont des communautés de prairie et de forêt d'origine naturelle et anthropique telles que définies dans la typologie des habitats de Suisse. Ces communautés sont principalement définies au niveau phytosociologique de l'alliance. Pour l'instant aucune carte de la distribution de ces communautés n'est disponible à l'échelle nationale et à résolution fine. Dans un premier temps, il a donc été nécessaire de créer des modèles de distribution de ces communautés à travers la Suisse et par conséquent de recueillir les données nécessaires. Afin d'atteindre ce premier objectif, plusieurs nouveaux développements ont été nécessaires, tels que la définition de modèles experts, la classification du territoire suisse en domaines environnementaux, la conception d'un échantillonnage environnementalement stratifié des unités de végétation cibles dans toute la Suisse, la création d'une base de données intégrant un système d'aide à la décision pour la classification des relevés, et le « downscaling » des données de couverture du sol de 100 m à 25 m de résolution. Les principales contributions de cette thèse à la discipline de la modélisation de la distribution d'espèces (SDM) sont rassemblées dans quatre articles scientifiques. Dans le premier article, publié dans le Journal of Biogeography, différentes questions liées au processus de modélisation sont étudiées en utilisant les données de l'inventaire forestier de l'Etat de Vaud. Tout d'abord sont évalués les effets de cinq méthodes de sélection pas-à-pas sur la performance, la stabilité et la parcimonie des modèles. Dans le même article sont également évalués: l'effet de la pondération des absences afin d'assurer une prévalence de 0.5 lors de la calibration du modèle; l'effet de limiter les absences au-delà de l'enveloppe définie par les présences; quatre méthodes différentes pour l'intégration de l'autocorrélation spatiale; et enfin, l'effet de l'intégration d'interactions entre facteurs. Les résultats présentés dans cet article ont permis d'améliorer l'outil GRASP qui intègre désonnais de nouvelles méthodes de sélection et la possibilité de traiter les interactions entre variables explicatives, ainsi que l'autocorrélation spatiale. La contribution de différentes sources de données issues de la télédétection a également été évaluée. Le deuxième article (en voie de soumission) explore les effets combinés de la taille de l'échantillon et de la post-stratification sur le la précision des modèles. Les données utilisées ici sont celles concernant la répartition des prairies de Suisse recueillies dans le cadre du projet Landspot et complétées par d'autres sources. Pour la stratification des données, différents cadres spatiaux ont été comparés. En particulier, la stratification environnementale par les domaines environnementaux de Suisse a été comparée à la stratification géographique par les régions biogéographiques ou par les cantons. Le troisième article (en voie de soumission) évalue la contribution de communautés végétales pré-modélisées à la modélisation de la faune. C'est une approche en deux étapes qui combine les disciplines de l'écologie des communautés et de l'écologie spatiale en intégrant leurs concepts de 'habitat' respectifs. Les communautés végétales sont modélisées d'abord, puis ces unités de 'habitat' sont utilisées pour modéliser les espèces animales. Une étude de cas est présentée avec des communautés prairiales et des espèces de papillons. Différentes façons d'intégrer l'information sur la végétation dans les modèles de répartition des papillons sont évaluées. Enfin, un clin d'oeil aux changements climatiques dans le dernier article, publié dans Ecological Modelling. Cet article propose un cadre conceptuel pour l'analyse des changements dans la distribution des espèces qui comprend notamment un catalogue des différentes formes possibles de changement le long d'un gradient d'élévation ou autre gradient environnemental, et une méthode quantitative améliorée pour identifier et décrire ces déplacements. Cette méthodologie a été développée en utilisant des données issues du monitoring des oiseaux nicheurs répandus et l'article présente les résultats concernant les déplacements observés dans la distribution altitudinale des oiseaux nicheurs en Suisse.L'objectif général de cette thèse est d'améliorer les modèles de distribution des espèces en tant que source d'information possible pour les différents outils de conservation (par exemple, listes rouges, réseaux écologiques, évaluation des risques de propagation d'espèces envahissantes, évaluation de la vulnérabilité des espèces dans le contexte de changement climatique). Bien que ces questions de conservation ne soient pas directement testées dans cette thèse, l'importance des améliorations proposées pour la modélisation de la distribution des espèces est discutée à la fin de ce travail dans le contexte de la sélection de réseaux de réserves.

Umbilical cord blood transplantation from unrelated donors in patients with Philadelphia chromosome-positive acute lymphoblastic leukemia.

There are very few disease-specific studies focusing on outcomes of umbilical cord blood transplantation for Philadelphia chromosome-positive acute lymphoblastic leukemia. We report the outcome of 45 patients with Philadelphia chromosome-positive acute lymphoblastic leukemia who underwent myeloablative single unit cord blood transplantation from unrelated donors within the GETH/GITMO cooperative group. Conditioning regimens were based on combinations of thiotepa, busulfan, cyclophospamide or fludarabine, and antithymocyte globulin. At the time of transplantation, 35 patients (78%) were in first complete remission, four (8%) in second complete remission and six (14%) in third or subsequent response. The cumulative incidence of myeloid engraftment was 96% at a median time of 20 days and significantly better for patients receiving higher doses of CD34(+) cells. The incidence of acute grade II-IV graft-versus-host disease was 31%, while that of overall chronic graft-versus-host disease was 53%. Treatment-related mortality was 17% at day +100 and 31% at 5 years. The 5-year relapse, event-free survival and overall survival rates were 31%, 36% and 44%, respectively. Although the event-free and overall survival rates in patients without BCR/ABL transcripts detectable at time of transplant were better than those in whom BCR/ABL transcripts were detected (46% versus 24% and 60% versus 30%, respectively) these differences were not statistically significant in the univariate analysis (P=0.07). These results demonstrate that umbilical cord blood transplantation from unrelated donors can be a curative treatment for a substantial number of patients with Philadelphia chromosome-positive acute lymphoblastic leukemia.

Evaluation of Different Methods to Calculate Heavy-Truck VMT, Final Report, December 2004

Reliable estimates of heavy-truck volumes are important in a number of transportation applications. Estimates of truck volumes are necessary for pavement design and pavement management. Truck volumes are important in traffic safety. The number of trucks on the road also influences roadway capacity and traffic operations. Additionally, heavy vehicles pollute at higher rates than passenger vehicles. Consequently, reliable estimates of heavy-truck vehicle miles traveled (VMT) are important in creating accurate inventories of on-road emissions. This research evaluated three different methods to calculate heavy-truck annual average daily traffic (AADT) which can subsequently be used to estimate vehicle miles traveled (VMT). Traffic data from continuous count stations provided by the Iowa DOT were used to estimate AADT for two different truck groups (single-unit and multi-unit) using the three methods. The first method developed monthly and daily expansion factors for each truck group. The second and third methods created general expansion factors for all vehicles. Accuracy of the three methods was compared using n-fold cross-validation. In n-fold cross-validation, data are split into n partitions, and data from the nth partition are used to validate the remaining data. A comparison of the accuracy of the three methods was made using the estimates of prediction error obtained from cross-validation. The prediction error was determined by averaging the squared error between the estimated AADT and the actual AADT. Overall, the prediction error was the lowest for the method that developed expansion factors separately for the different truck groups for both single- and multi-unit trucks. This indicates that use of expansion factors specific to heavy trucks results in better estimates of AADT, and, subsequently, VMT, than using aggregate expansion factors and applying a percentage of trucks. Monthly, daily, and weekly traffic patterns were also evaluated. Significant variation exists in the temporal and seasonal patterns of heavy trucks as compared to passenger vehicles. This suggests that the use of aggregate expansion factors fails to adequately describe truck travel patterns.

Contrasting patterns of insecticide resistance and knockdown resistance (kdr) in Aedes aegypti populations from Jacarezinho (Brazil) after a Dengue Outbreak

ABSTRACT After a dengue outbreak, the knowledge on the extent, distribution and mechanisms of insecticide resistance is essential for successful insecticide-based dengue control interventions. Therefore, we evaluated the potential changes to insecticide resistance in natural Aedes aegypti populations to Organophosphates (OP) and Pyrethroids (PY) after chemical vector control interventions. After a Dengue outbreak in 2010, A. aegypti mosquitoes from the urban area of Jacarezinho (Paraná, Brazil) were collected in 2011 and 2012. Insecticide resistance to OP Temephos was assessed in 2011 and 2012 by dose–response bioassays adopting WHO-based protocols. Additionally, in both sampling, PY resistance was also investigated by the Val1016Ile mutation genotyping. In 2011, a random collection of mosquitoes was carried out; while in 2012, the urban area was divided into four regions where mosquitoes were sampled randomly. Bioassays conducted with larvae in 2011 (82 ± 10%; RR95 = 3.6) and 2012 (95 ± 3%; RR95 = 2.5) indicated an incipient altered susceptibility to Temephos. On the other hand, the Val1016IIe mutation analysis in 2011, presented frequencies of the 1016Ilekdr allele equal to 80%. Nevertheless, in 2012, when the urban area of Jacarezinho was analyzed as a single unit, the frequency of the mutant allele was 70%. Additionally, the distribution analysis of the Val1016Ile mutation in 2012 showed the mutant allele frequencies ≥60% in all regions. These outcomes indicated the necessity of developing alternative strategies such as insecticide rotations for delaying the evolution of resistance.

Illusory contours: a window onto the neurophysiology of constructing perception.

Seeing seems effortless, despite the need to segregate and integrate visual information that varies in quality, quantity, and location. The extent to which seeing passively recapitulates the external world is challenged by phenomena such as illusory contours, an example of visual completion whereby borders are perceived despite their physical absence in the image. Instead, visual completion and seeing are increasingly conceived as active processes, dependent on information exchange across neural populations. How this is instantiated in the brain remains controversial. Divergent models emanate from single-unit and population-level electrophysiology, neuroimaging, and neurostimulation studies. We reconcile discrepant findings from different methods and disciplines, and underscore the importance of taking into account spatiotemporal brain dynamics in generating models of brain function and perception.

ELEKTRONIIKKATEHTAAN PAIKALLISESTIVALMISTETTUJEN KOMPONENTTIEN HANKINTAKETJUN KEHITTÄMINEN

Varastojen vähentämiseksi ehdotetaan usein eräkokojen pienentämistä. Tämä sopii sellaiseen toimintaympäristöön, jossa voidaan ostaa nimikkeitä oman valmistuksen ja myynnin tahdissa. Kun kiihkeärytmisessä elektroniikkabisneksessä alihankkijoilta ja varustetoimittajilta sitovasti tilataan hyvin lyhyellä toimitusajalla, ei oston eräkokojen pienentäminen kevennä materiaalivirtaa. Täytyy ottaa löysät pois hankintaketjun toimitusajoista. Monessa toimitusketjussa jalostava työ vaatii vain murto-osan toimitusajasta, ja loppuaika kuluu varastoissa odotteluun, kuljettamiseen ja moninkertaiseen tarkastamiseen. Hukka-ajan leikkaamisen ohessa haetaan muita kustannussäästöjä. Korkeiden työvoimakustannusten rasittama teollisuus on pyrkinyt teknisillä ratkaisuilla korvaamaan palkkatyövoiman erilaisilla mekaanisilla järjestelmillä. Pisimmällä ollaan pienerä- ja yksittäisvalmistusta harjoittavissa konepajoissa, joissa on investoitu FM-järjestelmiin. Diplomityössä on esitetty kaksi nivoutuvaa tutkimusprojektia, joista ensimmäinen keskittyy miehittämättömän käytön kehittämiseen ja toinen keventää hankintaketjun materiaalivirtaa. Ensin esiteltävä projekti on elektroniikkateollisuudelle uusi aluevaltaus. Siksi asiassa on jouduttu tekemään runsaasti perustutkimusta ja etenemään etappi kerrallaan. Projektin tuloksena on saatu aikaan automaattinen, joustava kuljetin, joka yksinään pystyy toimimaan ilman työvoimaa niin pitkään kunnes sen akut pitää ladata. Joustavan kuljettimen sisältävän järjestelmän muita elementtejä ei projektissa nostettu samalle miehittämättömän käytön tasolle, vaan ensin päätettiin hankkia kokemuksia kuljettimen toiminnasta. Toinen projekti syventää yhteistyötä yrityksen alihankkijan kanssa. Alihankkija on yksi harvojen Suomesta hankittavien komponenttien toimittaja. Siksi on pidetty tärkeänä tiivistää toimitusaikaa lähemmäs yrityksen sitovan tilauskannan pituutta. Tutkittavaksi valittiin mahdollisuus siirtää alihankkijan tuotantolaite yrityksen välittömään läheisyyteen, jolloin yrityksen tuotanto voisi tilata komponenttierän alihankkijan koneelta, kun se lähtötilanteessa tilataan komponenttivarastosta. Ennusteen perusteella tilattaisiin vain raaka-aine, mutta arvoa lisäävä työ tehtäisiin vain ja ainoastaan tilauksen mukaisesti.

Integroitujen laitekaappien tuotannon tehostaminen elektroniikkateollisuudessa

Laitekaappien integrointi koostuu moduulien sekä kaapeleiden liittämisestä mallikohtaisiksi kokonaisuuksiksi. Tämä kokoonpanoprosessi on tilausohjautuva ja tehdään mallikohtaisesti yksittäiskokoonpanona. Mallien integrointityön vaikeus ja kokoonpanoaika vaihtelevat voimakkaasti. Tämä yhdistettynä työvoiman vaihtuvuuteen luo haastavan ympäristön kehittää tuotantoa sekä laadun että kapasiteetin näkökulmasta. Työssä on selvitetty voidaanko näitä kehittää jakamalla tuotantoprosessi pienempiin vaiheisiin, jotka ovat helpompi tasapainottaa ja oppia. Kokoomalinjan soveltaminen tilausohjautuvaan tuotantoon vaatii perinteiseen tahdistettuun kokoomalinjaan nähden suurempien poikkeavuuksien sallimista. Toisistaan merkittävästi poikkeavien työaikojen ja laajan mallivariaation vuoksi linjaa ei pystytä hallitsemaan niin järjestelmällisesti kuin tasapituisilla työvaiheilla. Tehokkaan tuotannon aikaansaaminen tällaiselle linjalle vaatii mahdollisuutta työjärjestyksen suunnitteluun ja sen simulointiin. Tässä työssä on pyritty arvioimaan simuloinnin avulla kokoomalinjan toimivuutta stokastisen kysynnän vallitessa. Malli on luotu hyväksikäyttäen tuotteiden valmistusaikoja, jotka on jaettu mallikohtaisesti kaikkiin mahdollisiin työtehtäviin. Nämä tehtävät on pyritty tasapainottamaan eri työpisteiden tehtäviksi. Tasapainotuksen tavoitteena on ollut minimoida tuotteiden työtehtävien keston voimakasta hajontaa, jota mallien kysynnän satunnaisuus voimistaa. Simulointien perusteella on luotu yksinkertaistettu sääntö työjärjestyksen muodostamiselle. Mallinnuksessa on pyritty maksimoimaan tuotannon tehokkuus minimoiden sekä keskeneräisen tuotannon määrää että läpimenoaikaa. Tehokkaimman vaihtoehdon löydyttyä on arvioitu kokoomalinjan soveltuvuutta laitekaappien integrointiin.

Asiakasohjautuvan hitsaavan tilauskonepajan keinoja suhdannevaihteluiden vaikutuksen tasaamiseksi

Tämän diplomityön tarkoituksena on löytää hitsaavan asiakasohjautuvan tilauskonepajan käyttöön keinoja, joiden avulla on mahdollista tasata suhdannevaihteluiden vaikutusta yrityksen toimintaan. Korkea- ja matalasuhdanteen välistä eroa pyritään yksittäisen yrityksen osalta kaventamaan, vähentämään laskusuhdanteen vaikutuksia yritykseen ja parantamaan yrityksen valmiuksia noususuhdanteeseen siirryttäessä. Tämän työn tarkoituksen saavuttamiseksi tarkastelussa on keskitytty yrityksen tuottavuuteen, kannattavuuteen ja kustannustehokkuuteen. Tarkastelu on rajattu yksittäis- ja piensarjatuotantoon ja siinä tyypillisimmin käytössä oleviin kaarihitsausmenetelmiin. Teoreettinen tarkastelu on perustunut kirjallisuuteen ja oman työuran aikaisiin havaintoihin. Tarkastelua on täydennetty kolmen yrityksen toimitusjohtajan avoimella haastattelulla. Soveltuvina keinoina on löydetty asiakasohjautuvalle tilauskonepajalle yleisesti soveltuvia toimenpiteitä ja erikseen asiakasohjautuvan tilauskonepajan hitsaukseen soveltuvia toimenpiteitä. Löydetyillä yleisillä toimenpiteillä vaikutetaan erityisesti tuotannon sitoman pääoman määrään, toimitusvarmuuteen ja asiakassuhteen muotoon sekä niissä tapahtuviin muutoksiin. Hitsaukseen liittyvillä toimenpiteillä vaikutetaan pääasiassa tekijöihin, joiden avulla hitsaustyön määrää tuotteen valmistuksessa voidaan vähentää, tuotteen hitsaustyöhön kuluvaa aikaa voidaan pienentää ja hitsaustyötä voidaan helpottaa ja keventää.

Laskentasovelluksen kehittäminen modulaariselle vesiputkikattilalle

Modulaarisella vesiputkikattilalla tarkoitetaan täysin konepajalla valmistettavissa olevaa kattilaa, joka voidaan kuljettaa yhtenä tai muutamana suurena moduulina työmaalle. Tässä diplomityössä käsiteltiin modulaarisen vesiputkikattilan laskentasovelluksen ke-hittämistä KPA Unicon Oy:lle. Työn tavoitteena oli tarkastella modulaarisen vesiputkikattilan lämpöteknistä mitoitusta ja suunnittelua sekä kehittää laskentasovellus, jonka avulla voidaan arvioida kattilan mittoja ja painoa. Laskentasovellus laadittiin Microsoftin Excel-alustalle, josta se on myöhemmin mahdollista siirtää muille ohjelma-alustoille. Laskentasovelluksessa hyödynnetään lämmönsiirron ja virtaustekniikan laskentayhtälöitä sekä -menetelmiä. Sovellukseen valitut laskentayhtälöt sekä -menetelmät ovat yleisesti hyväksyttyjä ja käytännössä testattuja. Diplomityön tuloksena valmistui laskentasovellus, joka kykenee modulaarisen vesiputkikattilan lämpötekniseen mitoittamiseen. Sovelluksen avulla voidaan mitoittaa kattilan tulipesä, tulistimet, höyrystinpinnat sekä ekonomaiseri. Laskentasovellusta on tarkoitus hyödyntää yrityksen tarjousvaiheen projekteissa sekä mahdollisesti kattiloiden esisuunnittelussa. Laskentasovelluksen laatimista varten ei ollut mahdollista hyödyntää toiminnassa olevien kattiloiden prosessitietoja, koska ensimmäiset tämän tyyppiset kattilat ovat asenteilla. Sen sijaan sovelluksen antamia laskentatuloksia verrattiin toisen mitoitusohjelman antamiin tuloksiin, joiden perusteella laskentasovelluksen voidaan olettaa antavan oikeita tuloksia.

Polyphenolic cells and their interrelation with cotyledon cells in seven species of Theobroma (Sterculiaceae)

The amount of cotyledon polyphenolic cells varies extensively within the Theobroma species. The polyphenolic compounds of these cells play a protective role and furthermore have an important function in the development of chocolate flavour. The morphology of the polyphenolic cells of the mesophyll is described and the development of these idioblasts in Theobroma cacao L., T. subincanum Mart., T. obovatum Klotzsch ex Bernoulli, T. grandiflorum (Willd. ex Spreng.) K. Schum., T. microcarpum Mart., T. bicolor Bonpl. and T. speciosum Willd. ex Spreng analysed. The total polyphenolic content in the seeds as determined by spectrophotometry showed a variation of about forty times. The alive, transparent polyphenolic cells are scattered throughout the cotiledonary mesophyll. However the polyphenolic cells of T. cacao and T. grandiflorum are also aligned perpendicularly with respect to the mesophyll borders and, in addition, both species display polyphenolic cells with a natural translucent purple colour. All the species analysed contained polyphenolic cells scattered throughout the parenchymal cells and also in a lengthwise association with vascular bundles. In T. bicolor and T. speciosum, the species with the lowest polyphenolic contents, these cells were mostly located around the vascular bundles. Using Scanning Electron Microscopy, the polyphenolic cells demonstrated a complex cytoarchitecture, and after fixing with glutaraldhyde, the polyphenolic secretion was shown to remain as a single unit or was organized into round droplets. Transmission Electron Microscopy displayed immature plastids from young mesophyll cells containing eletron-dense deposits similar to phenolic substances, suggesting that Theobroma plastids are involved in the synthesis of phenolics.

Behavioral correlates of the activity of serotonergic and non-serotonergic neurons in caudal raphe nuclei

We investigated the behavioral correlates of the activity of serotonergic and non-serotonergic neurons in the nucleus raphe pallidus (NRP) and nucleus raphe obscurus (NRO) of unanesthetized and unrestrained cats. The animals were implanted with electrodes for recording single unit activity, parietal oscillographic activity, and splenius, digastric and masseter electromyographic activities. They were tested along the waking-sleep cycle, during sensory stimulation and during drinking behavior. The discharge of the serotonergic neurons decreased progressively from quiet waking to slow wave sleep and to fast wave sleep. Ten different patterns of relative discharge across the three states were observed for the non-serotonergic neurons. Several non-serotonergic neurons showed cyclic discharge fluctuations related to respiration during one, two or all three states. While serotonergic neurons were usually unresponsive to the sensory stimuli used, many non-serotonergic neurons responded to these stimuli. Several non-serotonergic neurons showed a phasic relationship with splenius muscle activity during auditory stimulation. One serotonergic neuron showed a tonic relationship with digastric muscle activity during drinking behavior. A few non-serotonergic neurons exhibited a tonic relationship with digastric and/or masseter muscle activity during this behavior. Many non-serotonergic neurons exhibited a phasic relationship with these muscle activities, also during this behavior. These results suggest that the serotonergic neurons in the NRP and NRO constitute a relatively homogeneous population from a functional point of view, while the non-serotonergic neurons form groups with considerable functional specificity. The data support the idea that the NRP and NRO are implicated in the control of somatic motor output.

GABA-induced inactivation of Cebus apella V2 neurons: effects on orientation tuning and direction selectivity

We investigated the GABA-induced inactivation of V2 neurons and terminals on the receptive field properties of this area in an anesthetized and paralyzedCebus apella monkey. Extracellular single-unit activity was recorded using tungsten microelectrodes in a monkey before and after pressure-injection of a 0.25 or 0.5 M GABA solution. The visual stimulus consisted of a bar moving in 8 possible directions. In total, 24 V2 neurons were studied before and after blocker injections in 4 experimental sessions following GABA injection into area V2. A group of 10 neurons were studied over a short period. An additional 6 neurons were investigated over a long period after the GABA injection. A third group of 8 neurons were studied over a very long period. Overall, these 24 neurons displayed an early (1-20 min) significant general decrease in excitability with concomitant changes in orientation or direction selectivity. GABA inactivation in area V2 produced robust inhibition in 80% and a significant change in directional selectivity in 60% of the neurons examined. These GABA projections are capable of modulating not only levels of spontaneous and driven activity of V2 neurons but also receptive field properties such as direction selectivity.