Preparation and characterization of monolithic columns for capillary electrochromatography with weak electroosmotic flow

Monolithic columns of capillary electrochromatography (CEC) with weak electroosmotic flow (EOF) have been prepared by in situ polymerization of butyl methacrylate and ethylene dimethacrylate, without any charged groups in the reaction mixture. The reproducibility of such columns has been proved good no matter whether they are prepared in the same batch or in different batches. In the case of BMA-EDMA monoliths, besides the traditional ternary mixture - 1-propanol, 1,4-butanediol, and water, binary porogenic solvents with only alcohols have also been adopted. Compared with ternary porogenic solvents, the design with binary ones allows for fine control of the pore diameter and the formation of the specific surface of the monolithic polymers. The composition of porogenic reagents has also been shown to have an effect on EOF in the column systems. In addition, the Joule heat effect in such columns has been studied by varying the inner diameter of columns. Through the separation of acidic compounds, monolithic columns with low EOF have shown potential in the analysis of charged samples.

Separation of peptides on mixed mode of reversed-phase and ion-exchange capillary electrochromatography with a monolithic column

The mixed mode of reversed phase (RP) and strong canon-exchange (SCX) capillary electrochromatography (CEC) based on a monolithic capillary column has been developed. The capillary monolithic column was prepared by in situ copolymerization of 2-(sulfooxy)ethyl methacrylate (SEMA) and ethylene dimethacrylate (EDMA) in the presence of porogens. The sulfate group provided by the monomer SEMA on the monolithic bed is used for the generation of the electroosmotic flow (EOF) from the anode to the cathode, but at the same time serves as a SCX stationary phase. A mixed-mode (RP/SCX) mechanism for separation of peptides was observed in the monolithic column, comprising hydrophobic and electrostatic interaction as well as electrophoretic migration at a low pH value of mobile phase. A column efficiency of more than 280000 plates/m for the unretained compound has been obtained on the prepared monoliths. The relative standard deviations observed for to and retention factors of peptides were about 0.32% and less than 0.71% for ten consecutive runs, respectively. Effects of mobile phase compositions on the EOF of the monolithic column and on the separation of peptides were investigated. The selectivity on separation of peptides in the monolithic capillary column could be easily manipulated by varying the mobile phase composition.

Abnormal phenomenon of the dependence of the retention factors for uncharged species on applied voltage in capillary electrochromatography

Polymethacrylate-based monolithic columns were prepared for capillary electrochromatography (CEC) by in situ copolymerization of butyl methacrylate (BMA), 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), and ethylene dimethacrylate (EDMA) in the presence of a porogen in fused-silica capillaries of 100 mum I.D. The abnormal phenomenon that retention factors for neutral species decreases with applied voltage in CEC was observed. Capillary electrophoresis (CE) instruments usually require a period of time to increase voltage from 0 kV to desired value, which is called as ramp time. Such ramp time and any error in the determination of dead time should be taken into account during the accurate calculation of retention factors. After the correction of the retention factors, the plots of the corrected factors for alkylbenzene versus applied voltage were made, the absolute value of the plot slopes are less than 1.8 X 10(-4), Which indicates that the corrected retention times for neutral species do not show any dependence on applied voltage. Further, the plots of the corrected retention times for acidic and basic compounds versus the reciprocal of applied voltage were drawn, where the target compounds were eluted in neutral form. The very nice linearity of the plots was obtained. The linear correlation coefficients are over 0.999. Here, the slopes of the plots represent

Protein A immobilized monolithic capillary column for affinity chromatography

Monolithic capillary columns for affinity chromatography were prepared by an in situ polymerization procedure using glycidyl methacrylate (GMA) as a monomer and trimethylolpropane trimethacrylate (TRIM) and ethylene dimethacrylate (EDMA) as cross-linkers, respectively. Scanning electron microscopy was applied to characterize the morphology of the end of monolithic capillary and mercury intrusion porosimetry to characterize the polymer rod prepared within the confines of a stainless steel column with 50 mm x 4.6 mm i.d. under the same polymerization condition. Obvious differences in the porous properties between the TRIM- and EDMA-based monoliths could be observed. Moreover, the mechanical stability of these two monolithic capillary columns was compared by testing the reproducibility of the column performance. The rod prepared with GMA and TRIM proved to be mechanically more stable than that prepared with GMA and EDMA. Protein A was immobilized on the monolithic rod for affinity chromatography and the experiments were performed on a capillary electrophoresis instrument, using its pressure system as the driving force. Non-specific adsorption was not observed on the TRIM-based affinity column, as proved with bovine serum albumin (BSA) as a test protein. The affinity column prepared with GMA and TRIM was then applied to determine the hIgG concentration in human serum. The correlative coefficient of the calibration curve reached 0.9942. The amount of adsorbed hIgG was unaffected by the flow rate of the loading buffer, which makes this method suitable for fast determination of biomacromolecules in microliter samples. (C) 2002 Elsevier Science B.V All rights reserved.

Hydrazide-functionalized hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) spheres for immobilization of enzyme

Hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)(HEMA-co-EDMA) spheres were prepared by emulsifier-free emulsion polymerization, swelling, seed emulsion polymerization and extraction. Then the spheres activated with 2,4,6-trichloro-1,3,5-triazine were functioned with adipohydrazide (AH). After periodate oxidation of its carbohydrate moieties, horseradish peroxidase was immobilized on the hydrazide-functionalized hollow porous poly(HEMA-co-EDMA) spheres. The amount of immobilized enzyme was up to 43.4 mu g of enzyme/g of support. Moreover, the immobilized horseradish peroxidase exhibited high activity and good stability.

Phenylurea herbicides-selective polymer prepared by molecular imprinting using N-(4-isopropylphenyl)-N'-butyleneurea as dummy template

A phenylurea herbicides-selective molecularly imprinted polymer (MIP) was prepared using N-(4-isopropylphenyl)-N'-butyleneurea as a dummy template and toluene as a porogen. The experimental results showed that the optimum molar ratio of template, functional monomer (MAA) and cross-linker (EDMA) was 1:8:20. Scatchard analysis showed that two classes of binding sites were formed in the imprinted polymer with dissociation constants of 26.81 mu L mol l(-1) and 1.428 mmol l(-1). The affinity and selectivity of MIP for phenylurea herbicides were studied. Among the 14 phenylurea herbicides tested, the MIP prepared showed obviously high affinity and selectivity for 10 chemicals (monuron, diuron, isoproturon, fenuron, chlortoluron, difenoxuron, metoxuron, neburon, buturon and fluometuron) with dichloromethane containing 10% hexane as mobile phase while non-imprinted polymer showed very low affinity for all the phenylurea herbicides tested. The experimental and calculated results also indicated that the size and property of the group at the N' position of phenylurea molecules have great influence on the affinity of MIP for them and the recognition site is mainly located at the N' position of phenylurea herbicides. (c) 2005 Elsevier B.V. All rights reserved.

Rapid protein identification using monolithic enzymatic microreactor and LC-ESI-MS/MS

A monolithic enzymatic microreactor was prepared in a fused-silica capillary by in situ polymerization of acrylamide, glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of a binary porogenic mixture of dodecanol and cyclohexanol, followed by ammonia solution treatment, glutaraldehyde activation and trypsin modification. The choice of acrylamide as co-monomer was found useful to improve the efficiency of trypsin modification, thus, to increase the enzyme activity. The optimized microreactor offered very low back pressure, enabling the fast digestion of proteins flowing through the reactor. The performance of the monolithic microreactor was demonstrated with the digestion of cytochrome c at high flow rate. The digests were then characterized by CE and HPLC-MS/MS with the sequence coverage of 57.7%. The digestion efficiency was found over 230 times as high as that of the conventional method. in addition, for the first time, protein digestion carried out in a mixture of water and ACN was compared with the conventional aqueous reaction using MS/MS detection, and the former solution was found more compatible and more efficient for protein digestion.

Synthesis of caffeic acid and p-hydroxybenzoic acid molecularly imprinted polymers and their application for the selective extraction of polyphenols from olive mill waste waters

Using caffeic acid and p-hydroxybenzoic acid as templates, two molecularly imprinted polymers (MIPs) were prepared that were used for isolation of polyphenols from olive mill waste water samples (OMWWs) without previous pre-treatment. For the preparation of the caffeic acid MIPs 4-vinylpyridine, allylurea, allylaniline and methacrylic acid were tested as functional monomers, ethylene glycol dimethylacrylate (EDMA), pentaerythritol trimethylacrylate (PETRA) and divinylbenzene 80 (DVB80) as cross-linkers and tetrahydrofuran as porogen. For p-hydroxybenzoic acid 4-vinylpyridine, allylurea and allylaniline were tested as functional monomers, EDMA and PETRA as cross-linkers and acetonitrile as porogen. The performance of the synthesized polymers was evaluated against seven structurally related compounds by means of polymer-based HPLC. The two polymers that presented the most interesting properties were further evaluated by batch rebinding and from the derived isotherms their capacity and binding strength were determined. Using solid-phase extraction (SPE), their ability to recognize and bind the template molecule from an aqueous solution as well as the pH dependence of the binding strength were explored. After establishing the best SPE protocol, an aqueous model mixture of compounds and a raw OMWWs sample were loaded on the two best polymers. The result of the consecutive use of the two polymers on the same sample was explored. It was concluded that acidic conditions favour the recognition abilities of both polymers and that they can be used for a quick and efficient isolation of the polyphenol fraction directly from raw OMWW.

The inflammatory role of angiogenic growth factors : a neutrophil perspective

De par sa présence dans tous les vaisseaux sanguins, l'endothélium joue un rôle clef dans le processus d’hémostase, tant par sa libération de facteurs anticoagulants que par ses changements protéiques qui permettent à l’organisme de déclencher la réparation tissulaire. La fonction anticoagulante de l’endothélium peut être mise en défaut en cas d’atteinte de son intégrité, entrainant la formation de thrombus, le rejet précoce de greffes ou encore l’induction de l’athérosclérose. L’intégrité de l’endothélium est donc capitale pour la prévention de nombreuses maladies cardiovasculaires. Chez l’adulte, les cellules endothéliales (CE), normalement quiescentes, sont rapidement activées en cas d’hypoxie ou d’inflammation, leur permettant ainsi d’amorcer le processus angiogénique comme suit: Tout d’abord, l’induction de l’hyperperméabilité vasculaire permet l’extravasation des protéines plasmatiques. Ensuite, la dégradation de la lame basale par des métalloprotéases permet aux CE de se détacher, de proliférer, de migrer et de s’organiser pour former l’ébauche du futur vaisseau. La dernière étape consiste en la maturation du vaisseau, c’est-à-dire son recouvrement par des cellules murales, telles que les cellules musculaires lisses et les péricytes. Ces processus sont régulés par de nombreux facteurs angiogéniques tels que les membres de la famille Notch, du vascular endothelial growth factor (VEGF), du fibroblast growth factor (FGF), des angiopoïétines, et des matrix metalloproteases (MMP). L’angiogenèse pathologique, soit une insuffisance ou un excès de vascularisation, est impliquée dans les blessures chroniques, les accidents cardiovasculaires, les pathologies coronariennes artérielles, les pathologies tumorales, l’arthrite rhumatoïde, la rétinopathie diabétique, l’athérosclérose, le psoriasis et l’asthme. Ces pathologies sont souvent issues d’une dérégulation de l’activité endothéliale, fréquemment observée conjointement à l’expression continue de molécules d’adhésion leucocytaires, à l’augmentation de la perméabilité vasculaire, et aux anomalies de la vasoréactivité. L’activation non-contrôlée de l’endothélium entraîne ainsi une inflammation chronique et la formation de structures vasculaires anarchiques. Les premiers leucocytes à répondre à l’appel inflammatoire sont les neutrophiles. Equippées d’une panoplie de produits antibactériens puissants mais aussi nocifs pour les tissus qui les entourent, ces cellules polylobées participent à chaque étape du processus inflammatoire, depuis l’induction de l’hyperperméabilité vasculaire jusqu’à la résolution. En effet, grâce à leurs récepteurs, les neutrophiles détectent et interprètent les signaux biochimiques présents dans la circulation et à la surface de l’endothélium, et libèrent aussi leurs propres médiateurs tels le VEGF, les MMP, et l’interleukine-8 (IL-8), dont les effets sont à la fois paracrines et autocrines. Existent-ils d’autres modulateurs typiques de la fonction endothéliale capables d’influencer le comportement des neutrophiles? En effet, notre laboratoire a démontré que chez l’humain, une stimulation directe aux angiopoïétines incitait les neutrophiles à adhérer aux CE, à migrer, à synthétiser et à relâcher l’IL-8, voire même à vivre plus longtemps. La présence du récepteur des angiopoïétines, Tie2, à la surface des neutrophiles laisse présager que la famille possèderait d’autres fonctions leucocytaires encore non-identifiées. Par ailleurs, dans un modèle classique de l’angiogenèse in vivo (matrigel), nous avons observé que sous l’effet du FGF1 et 2, les ébauches des nouveaux vaisseaux étaient parfois accompagnées d’une infiltration de cellules granulocytaires. Ainsi, en partant de ces observations, l’objectif de nos études (présentées ci-après) était d’approfondir nos connaissances sur la relation entre neutrophiles et facteurs angiogéniques, notamment les FGF et les angiopoïétines. Par tests in vitro, nous avons confirmé que les neutrophiles humains exprimaient plusieurs récepteurs du FGF (FGFR1-4) d’une façon hétérogène, et qu’ils migraient vers un gradient des ligands FGF1 et 2. Par ailleurs, nous nous sommes intéressés aux voies de signalisation inflammatoires activées par les ligands FGF1, FGF2, Ang1 et Ang2. Grâce à une stratégie génique ciblant 84 gènes inflammatoires, nous avons identifié plusieurs cibles d’intérêt touchées par Ang1, dont certains membres de la famille de l’IL-1, alors qu’aucun des gènes testés n’avait changé de façon significative sous l’effet des FGF ou d’Ang2. Suite à des cinétiques approfondies, nous avons démontré qu’Ang1 stimulait la transcription de l’ARN messager de l’IL-1β, et augmentait simultanément la quantité de protéine immature (pro-IL-1β; inactive) et clivée (IL-1β « mature »; active). En parallèle, Ang1 augmentait la sécrétion de l’antagoniste naturel de l’IL-1β, l’IL-1RA, sans pour autant stimuler la relâche de l’IL-1β. A l’instar des endotoxines bactériennes dont les effets liés à l’IL-1 dépendaient de la kinase p38, ceux d’Ang1 découlaient presque entièrement des voies de signalisation du p42/44.

Recerca i transferència tecnològica: Els grups de recerca de l'EPS es presenten

Tres grups de recerca de l'Escola Politècnica Superior, AMADE, EDMA i GITASP, expliquen algunes de les seves línies de recerca

M??s all?? de los contenidos, los procesos matem??ticos en Educaci??n Infantil

Resumen tomado de la publicaci??n

Apuntes te??ricos sobre el pensamiento matem??tico y multiplicativo en los primeros niveles

Resumen tomado de la publicaci??n

??Hay algo m??s que contar sobre las habilidades num??ricas de los beb??s y los ni??os?

Resumen tomado de la publicaci??n

Competencia matem??tica en ni??os de 4 a??os

Resumen basado en el de la publicaci??n

Narraci??n de un taller de resoluci??n de problemas aritm??ticos con ni??os de 4 a??os

Resumen basado en el de la publicaci??n