The Present State and a Development Plan of Cost Accounting in Batch Production of Wind Turbine Gears

The aim of this master’s thesis was to document the present state and to create a development plan for Moventas Wind’s cost accounting. The current cost accounting system was evaluated and most fundamental problems were chosen as areas of focus in development work. The development plan includes both short- and long-term development proposals for problems identified. This report presents two alternative models for product costing. Benchmarking of cost accounting practices and modern cost accounting theories were used in development of cost accounting. It was found that the current cost accounting system functions quite well and the adjustments in unit cost rate calculation have only a minor influence on costs of goods sold. An OEE-based standard cycle concept was also developed and it was found that the implementation of this new system is worthwhile in the long-term.

Overvoltage Mitigation Techniques in Wind Power Generators

Advancements in power electronic semiconductor switching devices have lead to significantly faster switching times. In motor and generator applications, the fast switching times of pulse width modulated (PWM) inverters lead to overvoltages caused by voltage reflections with shorter and shorter cables. These excessive overvoltages may lead to a failure of the electrical machine in a matter of months. In this thesis, the causes behind the overvoltage phenomenon as well as its different mitigation techniques are studied. The most suitable techniques for mitigating the overvoltage phenomenon in wind power generator applications are chosen based on both simulations and actual measurements performed on a prototype. An RC filter at the terminals of the electrical machine and an inverter output filter designed to reduce the rise and fall times of voltage pulses are presented as a solution to the overvoltage problem. The performance and losses of both filter types are analysed.

Tuotannonohjauksen kehittäminen piensarjatuotannossa

Tämä diplomityö käsittelee teollisen yrityksen tuotannonohjauksen kehittämistä piensarjatuotannossa. Työn kohteena on ABB Oy:n Tuulivoimageneraattorit-tulosyksikkö, joka valmistaa vakiotuotteita asiakasohjautuvasti. Työssä esitellään aluksi tuotannon ja tuotannonohjauksen teoriaa. Lävitse käydään perusasioiden kuten määritelmien, tavoitteiden ja tehtävien lisäksi tuotannonohjausprosessia sekä tuotannonohjauksen tietotekniikkaa. Teorian jälkeisessä empiriaosuudessa esitellään työssä kehitettyjä keinoja tuotannonohjauksen parantamiseksi. Tutkimus on toteutettu teoreettisen ja empiirisen tutkimustyön avulla. Teoreettiseen tutkimustyöhön sisältyi suomalaisiin ja ulkomaalaisiin kirjallisuuslähteisiin perehtyminen. Empiirinen tutkimustyö suoritettiin itsenäisen ongelman ratkaisutyön avulla. Tämä sisälsi kehittämiskohteiden analysoinnin, tarkempien kehittämistarpeiden määrityksen sekä kokeilujen kautta tapahtuneen kehittämistyön. Tutkimuksen päätavoitteena oli selvittää, miten tuotannonohjauksen kehittämisellä voidaan parantaa kohteena olevan tulosyksikön tuottavuutta ja kannattavuutta. Päätavoitteen pohjalta muodostettiin kuusi osatavoitetta: toimitusvarmuuden parantaminen, kapasiteetin kuormitusasteen nostaminen, kapasiteetin suunnittelun kehittäminen, läpäisyaikojen lyhentäminen, uuden ERP-järjestelmän vaatimusmäärittely sekä tuotannonohjausprosessin määrittäminen. Työssä rakennettiin neljään ensiksi mainittuun osatavoitteeseen tietotekniset sovellukset, jotka mahdollistavat osatavoitteiden suunnittelun ja ohjaamisen. Sovelluksia varten kullekin tuotteelle määriteltiin esimerkiksi työnvaiheketjut läpäisyaikoineen, kuormitusryhmät, kuormitusryhmien kapasiteetit, tuotteiden kuormittavuudet sekä kriittiset työvälineet. Työ osoitti, että tietotekniikka auttaa suuresti tuotannonohjauksessa. Lisääntynyt läpinäkyvyys, parantunut tiedonkulku, simulointimahdollisuudet sekä graafinen esitystapa helpottavat erilaisten suunnitelmien teossa ja parantavat siten päätöksenteon laatua. Tietotekniikan hyväksikäytön pohjana toimii tuotannon perus- ja tapahtumatietojen kurinalainen päivitys. Tämän vuoksi tietojärjestelmistä kannattaa rakentaa mahdollisimman yksinkertaisia.

Sales and Operations Planning Implementation

The master’s thesis focused on implementing a sales and operations planning process. The main objectives were to create planning methods and tools for the implementation. The ultimate goal of the process, beyond this master’s thesis, is to balance the supply of products with customer demand, with optimized profitability. The theoretical part focused on giving a thorough view on the sales and operations planning process. The basis for a monthly planning cycle was identified. Methods, tools, and metrics for demand forecasting and operations planning were also introduced. Based on the theoretical part, a method for forecasting, a forecast spreadsheet, and a forecast accuracy metric were designed. A spreadsheet tool and methods were also designed for the monthly planning of production volumes, capacity, and inventory. The implementation progress was reviewed for two product families for three months. The sales and operations planning process was able to successfully identify a demand peak for the product families. Suggestions for the future of sales and operations planning were also made.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

Production Cycle Optimization: Defining the Market Potential for a New Planning Tool

An optimization tool has been developed to help companies to optimize their production cycles and thus improve their overall supply chain management processes. The application combines the functionality that traditional APS (Advanced Planning System) and ARP (Automatic Replenishment Program) systems provide into one optimization run. A qualitative study was organized to investigate opportunities to expand the product’s market base. Twelve personal interviews were conducted and the results were collected in industry specific production planning analyses. Five process industries were analyzed to identify the product’s suitability to each industry sector and the most important product development areas. Based on the research the paper and the plastic film industries remain the most potential industry sectors at this point. To be successful in other industry sectors some product enhancements would be required, including capabilities to optimize multiple sequential and parallel production cycles, handle sequencing of complex finishing operations and to include master planning capabilities to support overall supply chain optimization. In product sales and marketing processes the key to success is to find and reach the people who are involved directly with the problems that the optimization tool can help to solve.

Optimization of wind blade design including its energetic characteristics

The goal of the Master’s thesis is to develop and to analyze the optimization method for finding a geometry shape of classical horizontal wind turbine blades based on set of criteria. The thesis develops a technique that allows the designer to determine the weight of such factors as power coefficient, sound pressure level and the cost function in the overall process of blade shape optimization. The optimization technique applies the Desirability function. It was never used before in that kind of technical problems, and in this sense it can claim to originality of research. To do the analysis and the optimization processes more convenient the software application was developed.

Developing a Comprehensive Model for Marketing Planning — Combining the Major Approaches

Mix marketing and relationships marketing are two major approaches that often form a basis for organizational marketing planning. The superiority of these approaches has been debated for long without any rational conclusion. Lately there have been studies indicating that both of the major approaches are many times used side by side in marketing planning. There have been also studies suggesting that even combining the mix marketing and relationship marketing approaches might be possible. The aim of this thesis is to provide knowledge about the usage of mix marketing and relationship marketing approaches in organizations and possibilities in combining the approaches. Also a settlement of strengths, weaknesses and risks of combining is intended to provide. The objectives were met through the literature and a case study research. In the case study, interviews were conducted in order to gain a deeper knowledge about marketing planning in various organizations. Based on this study, the combining of the major marketing approaches will be possible and even recommended when keeping in mind few aspects which might cause some troubles in the combining process.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Doubly fed induction generator versus direct drive permanent magnet synchronous generator in wind power applications

The objective of this master's thesis is to compare two different generator systems for wind turbines. It is the doubly fed induction generator system with three stage gearbox and the direct drive permanent magnet generator system. The comparison of generator systems is based on annual energy production for a given wind climate. For comparison a 3 MW, 15 rpm wind turbine is used. Modelling of a turbine rotor, gearbox and converters were done. Design of two generators was done and their performance was examined.

Researching Manufacturing Planning and Control system and Master Scheduling in a manufacturing firm.

The objective of this thesis is to research Manufacturing Planning and Control (MPC) system and Master Scheduling (MS) in a manufacturing firm. The study is conducted at Ensto Finland Corporation, which operates on a field of electrical systems and supplies. The paper consists of theoretical and empirical parts. The empirical part is based on weekly operating at Ensto and includes inter-firm material analysis, learning and meetings. Master Scheduling is an important module of an MPC system, since it is beneficial on transforming strategic production plans based on demand forecasting into operational schedules. Furthermore, capacity planning tools can remarkably contribute to production planning: by Rough-Cut Capacity Planning (RCCP) tool, a MS plan can be critically analyzed in terms of available key resources in real manufacturing environment. Currently, there are remarkable inefficiencies when it comes to Ensto’s practices: the system is not able to take into consideration seasonal demand and react on market changes on time; This can cause significant lost sales. However, these inefficiencies could be eliminated through the appropriate utilization of MS and RCCP tools. To utilize MS and RCCP tools in Ensto’s production environment, further testing in real production environment is required. Moreover, data accuracy, appropriate commitment to adapting and learning the new tools, and continuous developing of functions closely related to MS, such as sales forecasting, need to be ensured.

Harvesting and wood transport planning with SNAP III program (Scheduling and Network Analysis Program) in a pine plantation in Southeast Brazil

The objective of this study was to verify the potential of SNAP III (Scheduling and Network Analysis Program) as a support tool for harvesting and wood transport planning in Brazil harvesting subsystem definition and establishment of a compatible route were assessed. Initially, machine operational and production costs were determined in seven subsystems for the study area, and quality indexes, construction and maintenance costs of forest roads were obtained and used as SNAP III program input data. The results showed, that three categories of forest road occurrence were observed in the study area: main, secondary and tertiary which, based on quality index, allowed a medium vehicle speed of about 41, 30 and 24 km/hours and a construction cost of about US$ 5,084.30, US$ 2,275.28 and US$ 1,650.00/km, respectively. The SNAP III program used as a support tool for the planning, was found to have a high potential tool in the harvesting and wood transport planning. The program was capable of defining efficiently, the harvesting subsystem on technical and economical basis, the best wood transport route and the forest road to be used in each period of the horizon planning.

Warning system based on theoretical-experimental study of dispersion of soluble pollutants in rivers

Information about capacity of transport and dispersion of soluble pollutants in natural streams are important in the management of water resources, especially in planning preventive measures to minimize the problems caused by accidental or intentional waste, in public health and economic activities that depend on the use of water. Considering this importance, this study aimed to develop a warning system for rivers, based on experimental techniques using tracers and analytical equations of one-dimensional transport of soluble pollutants conservative, to subsidizing the decision-making in the management of water resources. The system was development in JAVA programming language and MySQL database can predict the travel time of pollutants clouds from a point of eviction and graphically displays the temporal distribution of concentrations of passage clouds, in a particular location, downstream from the point of its launch.

Future trends of Finnish cement based construction

The construction material sector, as a capital intensive industry, is highly vulnerable to rapid fluctuations in the economic cycles. In Finland this was witnessed especially during the late 2000s, as in 2007 and 2008 the demand for several construction materials exceeded their supply and right after this, in 2009 the demand collapsed fast as a result of an international recession. These factors brought about the need to study the future trends of the market place of the commissioning company, Finnsementti Oy. As reliable short term market forecasts for the sector are difficult to compose, the study concentrates primarily in examining and identifying the trends that are likely to affect the Finnish cement industry, and as an extension, the concrete industry in a frame of 10 to 15 years. The study’s scope comprehends also the examination of the domestic construction sector, as it represents the end user industry of both cement and concrete. These motives for the study produce the research problem, which is to conduct a trend analysis for cement based building in the Finnish market area in the 2020s. The theoretical frame for composing a trend analysis in the case of this study is twofold. This is due to the fact that both, the macro and micro environments of the examined industries are studied. The main methods used are the PESTE-model (macro) and Porter’s five forces model (micro). The study applies a qualitative approach and the data is gathered by interviewing a group of experts from the cement, concrete and construction industries. The result of the paper is an overall trend analysis for the Finnish cement based building sector, which is based on ‘sub trend analyses’ concerning four identified sub-sectors of the Finnish construction industry. The results are a combination of findings from these sub-sectors and the analyzed data that deals with the studied sector’s macro and micro environment. The conclusions provide an overall picture of the examined sectors’ potential future as a whole and by defined sub-sectors of the construction industry. The recognition of future trends in different areas of the construction industry can be applied as a means for an industry actor’s decision making and in estimating the types of construction that are likely to grow or decline. Finally, based on the analyzed data and conclusions, the commissioning company is provided with a brief SWOT analysis, that provides additional tools for decision making and planning processes regarding the future.

Developing customer need based services in personal security service industry

The purpose of this thesis is to examine how services can be developed and how the voice of the customer can be incorporated to the strategic planning of services. Furthermore, the objective is to investigate the methods of customer need analysis and service bundling. The data is collected from secondary and primary sources by reviewing the existing academic literature and by conducting in-depth interviews and surveys. The main findings of this research indicate that the service development in personal security service industry should be conducted through a formalized process and the process should begin with setting the strategic objectives. Moreover, the voice of the customer should be incorporated into all stages of the development process, especially into the front-end of the process. Furthermore, the information on customer needs should be gathered in a manner tailored for the purposes of service development.