Performance of coastal sea-defense infrastructure at El Jadida (Morocco) against tsunami threat: lessons learned from the Japanese 11 March 2011 tsunami

This paper seeks to investigate the effectiveness of sea-defense structures in preventing/reducing the tsunami overtopping as well as evaluating the resulting tsunami impact at El Jadida, Morocco. Different tsunami wave conditions are generated by considering various earthquake scenarios of magnitudes ranging from M-w = 8.0 to M-w = 8.6. These scenarios represent the main active earthquake faults in the SW Iberia margin and are consistent with two past events that generated tsunamis along the Atlantic coast of Morocco. The behavior of incident tsunami waves when interacting with coastal infrastructures is analyzed on the basis of numerical simulations of near-shore tsunami waves' propagation. Tsunami impact at the affected site is assessed through computing inundation and current velocity using a high-resolution digital terrain model that incorporates bathymetric, topographic and coastal structures data. Results, in terms of near-shore tsunami propagation snapshots, waves' interaction with coastal barriers, and spatial distributions of flow depths and speeds, are presented and discussed in light of what was observed during the 2011 Tohoku-oki tsunami. Predicted results show different levels of impact that different tsunami wave conditions could generate in the region. Existing coastal barriers around the El Jadida harbour succeeded in reflecting relatively small waves generated by some scenarios, but failed in preventing the overtopping caused by waves from others. Considering the scenario highly impacting the El Jadida coast, significant inundations are computed at the sandy beach and unprotected areas. The modeled dramatic tsunami impact in the region shows the need for additional tsunami standards not only for sea-defense structures but also for the coastal dwellings and houses to provide potential in-place evacuation.

Monte Carlo modeling and simulations of the High Definition (HD120) micro MLC and validation against measurements for a 6 MV beam

Purpose: The most recent Varian® micro multileaf collimator(MLC), the High Definition (HD120) MLC, was modeled using the BEAMNRCMonte Carlo code. This model was incorporated into a Varian medical linear accelerator, for a 6 MV beam, in static and dynamic mode. The model was validated by comparing simulated profiles with measurements. Methods: The Varian® Trilogy® (2300C/D) accelerator model was accurately implemented using the state-of-the-art Monte Carlo simulation program BEAMNRC and validated against off-axis and depth dose profiles measured using ionization chambers, by adjusting the energy and the full width at half maximum (FWHM) of the initial electron beam. The HD120 MLC was modeled by developing a new BEAMNRC component module (CM), designated HDMLC, adapting the available DYNVMLC CM and incorporating the specific characteristics of this new micro MLC. The leaf dimensions were provided by the manufacturer. The geometry was visualized by tracing particles through the CM and recording their position when a leaf boundary is crossed. The leaf material density and abutting air gap between leaves were adjusted in order to obtain a good agreement between the simulated leakage profiles and EBT2 film measurements performed in a solid water phantom. To validate the HDMLC implementation, additional MLC static patterns were also simulated and compared to additional measurements. Furthermore, the ability to simulate dynamic MLC fields was implemented in the HDMLC CM. The simulation results of these fields were compared with EBT2 film measurements performed in a solid water phantom. Results: Overall, the discrepancies, with and without MLC, between the opened field simulations and the measurements using ionization chambers in a water phantom, for the off-axis profiles are below 2% and in depth-dose profiles are below 2% after the maximum dose depth and below 4% in the build-up region. On the conditions of these simulations, this tungsten-based MLC has a density of 18.7 g cm− 3 and an overall leakage of about 1.1 ± 0.03%. The discrepancies between the film measured and simulated closed and blocked fields are below 2% and 8%, respectively. Other measurements were performed for alternated leaf patterns and the agreement is satisfactory (to within 4%). The dynamic mode for this MLC was implemented and the discrepancies between film measurements and simulations are within 4%. Conclusions: The Varian® Trilogy® (2300 C/D) linear accelerator including the HD120 MLC was successfully modeled and simulated using the Monte CarloBEAMNRC code by developing an independent CM, the HDMLC CM, either in static and dynamic modes.

Protection against oxidative stress through SUA7/TFIIB regulation in Saccharomyces cerevisiae

The general transcription factor TFIIB, encoded by SUA7 in Saccharomyces cerevisiae, is required for transcription activation but apparently of a specific subset of genes, for example, linked with mitochondrial activity and hence with oxidative environments. Therefore, studying SUA7/TFIIB as a potential target of oxidative stress is fundamental. We found that controlled SUA7 expression under oxidative conditions occurs at transcriptional and mRNA stability levels. Both regulatory events are associated with the transcription activator Yap1 in distinct ways: Yap1 affects SUA7 transcription up regulation in exponentially growing cells facing oxidative signals; the absence of this activator per se contributes to increase SUA7 mRNA stability. However, unlike SUA7 mRNA, TFIIB abundance is not altered on oxidative signals. The biological impact of this preferential regulation of SUA7 mRNA pool is revealed by the partial suppression of cellular oxidative sensitivity by SUA7 overexpression, and supported by the insights on the existence of a novel RNA-binding factor, acting as an oxidative sensor, which regulates mRNA stability. Taken together the results point out a primarily cellular commitment to guarantee SUA7 mRNA levels under oxidative environments.

Diagnóstico energético da indústria de placas de borracha e optimização do sector de pintura

Cada vez mais a indústria tem vindo a sofrer algumas mudanças no seu processo produtivo. Hoje, mais que nunca, é preciso garantir que as instalações produtivas sejam o mais eficiente possível, procurando a racionalização de energia com um decrescimento dos custos. Deste modo o objectivo desta dissertação é o diagnóstico energético da fábrica de placas de borracha e a optimização do sector da pintura na empresa Monteiro Ribas. A realização de um diagnóstico energético, para a detecção de desperdícios de energia tem sido amplamente utilizada. A optimização irá prospectar potenciais de mudanças e aplicação de tecnologias de eficiência energética. Pretende-se deste modo travar o consumo energético sem que seja afectada a produção, já que a empresa é considerada consumidora intensiva de energia. Na empresa Monteiro Ribas há consumo de gás natural, de vapor e de energia eléctrica, sendo o vapor a forma de energia mais consumida, seguida da energia eléctrica e por fim, do gás natural nas proporções de 55%, 41% e 4%, respectivamente. A optimização feita permitiu estudar a influência de algumas variáveis, nos consumos anuais da energia, e assim apresentar propostas de melhoria. Uma das propostas analisadas foi a possibilidade de efectuar um isolamento térmico a algumas válvulas. Este isolamento conduziria a uma poupança de 79.263,4 kWh/ano. Propôs-se também a implementação de balastros electrónicos, que conduziria a uma diminuição em energia eléctrica de 29.509,92 kWh/ano. Relativamente às máquinas utilizadas no sector da pintura, verificou-se ser a estufa IRK 6, um dos equipamentos de grande consumo energético. Então analisou-se a influência da velocidade de circulação das placas de borracha através desta máquina, bem como a alteração da respectiva potência, pela diminuição do número de cassetes incorporados nesta estufa.

Indústria de curtumes: energia e desenvolvimento

Este trabalho, numa fase inicial, teve como pilar fundamental, a optimização energética de uma indústria de curtumes, mais concretamente da empresa Dias Ruivo. Pretendia-se avaliar todos os gastos de energia apresentados pela empresa, com o intuito de verificar se haveria possibilidade de diminuir a factura da electricidade e os custos associados, mantendo a qualidade dos produtos finais. Ainda se pretendia averiguar a viabilidade de reutilização de alguns desperdícios permitindo diminuir a quantidade de energia necessária para o aquecimento de algumas correntes de água. Por último, após os dados recolhidos, sugeriram-se medidas de melhoria, que possibilitariam que a empresa utilizasse os seus recursos de forma optimizada, não apresentando assim gastos desnecessários. Começando pela análise da factura de electricidade, verificou-se que nos anos de 2010 e 2011, a empresa apresentou um consumo de energia de 120 e 128 tep/ano, respectivamente. Determinaram-se igualmente os respectivos indicadores constatando-se que o valor médio para a intensidade carbónica foi de 900 e 1148 kg CO2/tep e para o consumo específico obteve-se 0,131 e 0,152 kgep/ft2, respectivamente. Numa segunda fase, tendo em conta a constante aposta da empresa na inovação de artigos em couro e o facto de estar envolvida num projecto mobilizador de ciência e tecnologia com esse fim, o trabalho incidiu no desenvolvimento de um produto inovador designado por floater que deve ser macio e mais leve que os produtos normais. Com base na aplicação de proteases apropriadas, desenvolveu-se um produto que, ainda na fase de ensaios de bancada e piloto, satisfaz no que respeita à macieza e leveza, sendo que se conseguiu um valor de 67 g/ft2 contra um valor de 75g/ft2 do padrão.

A gestão pública e a auditoria: perspectiva dos gestores sobre a importância, as funções e o papel da auditoria

Mestrado em Auditoria

Reflexão sobre o programa preliminar de reabilitação do salão paroquial e zonas contíguas do complexo paroquial da igreja matriz de Nossa Senhora da Conceição da Amadora

Projecto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Edificações

Stability of the tree-level vacuum in two Higgs doublet models against charge or CP spontaneous violation

We show that in two Higgs doublet models at tree-level the potential minimum preserving electric charge and CP symmetries, when it exists, is the global one. Furthermore, we derived a very simple condition, involving only the coefficients of the quartic terms of the potential, that guarantees spontaneous CP breaking. (C) 2004 Elsevier B.V. All rights reserved.

Direct medical costs associated with schizophrenia relapses in health care services in the city of São Paulo

OBJECTIVE: To assess direct medical costs associated with schizophrenia relapses in mental health services. METHODS: The study was conducted in three health facilities in the city of São Paulo: a public state hospital; a Brazilian National Health System (SUS)-contracted hospital; and a community mental health center. Medical records of 90 patients with schizophrenia who received care in 2006 were reviewed. Information on inpatient expenditures was collected and used for cost estimates. RESULTS: Mean direct medical cost of schizophrenia relapses per patient was US$ 4,083.50 (R$ 8,167.58) in the public state hospital; US$ 2,302.76 (R$ 4,605.46) in the community mental health center; and US$ 1,198.50 (R$ 2,397.74) in the SUS-affiliated hospital. The main component was daily inpatient room rates (87% - 98%). Medication costs varied depending on the use of typical or atypical antipsychotic drugs. Atypical antipsychotic drugs were more often used in the community mental health center. CONCLUSIONS: Costs associated with schizophrenia relapses support investments in antipsychotic drugs and strategies to reduce disease relapse and the need for mental health inpatient services. Treating patients in a community mental health center was associated with medium costs and added the benefit of not depriving these patients from family life.

As guardas de segurança para proteção a motociclistas: características e graus de eficácia

Os acidentes envolvendo veículos de duas rodas, são um dos maiores problemas da segurança rodoviária atual, no âmbito Europeu. Um dos tipos de acidentes que pode causar danos mais graves aos ocupantes desses veículos é o embate com guardas de segurança. Em consequência disso, neste trabalho foram desenvolvidas opiniões, abonatórias ou não, ao uso de dispositivos de proteção para motociclistas acoplados nas guardas de segurança. Estas opiniões vão partir de dados estatísticos, de estudos e exemplos concretos de vários autores e publicações relacionados com esta temática, sendo que o tipo de dispositivo de proteção para motociclistas que vai estar mais em foco e sendo ele o mais habitual nas estradas portuguesas será a saia metálica. Estes dispositivos de segurança para motociclistas ainda não são de uso obrigatório nas guardas de segurança na maioria dos países do continente Europeu, segundo a norma europeia EN 1317, apesar deste tipo de proteção já estar normalizada segundo padrões de lesões biomecânicos na zona da cabeça, cervical e anca/abdómen descritos na norma EN 1317 UNE 135900 – 1:2003, em alguns países é descurado o uso destas proteções, por não serem obrigatórias e porque ainda se tornam mais dispendiosas que as guardas de segurança habituais (barreiras de metal simples). Este estudo serviu essencialmente para verificar se estes dispositivos salvaguardam ou não a vida dos utilizadores de duas rodas, pois, se pelo contrário, aumentam ainda o risco, ou de lesões mais gravosas ou mesmo de morte, aquando o embate com as mesmas, os gastos associados a este tipo de equipamentos serão totalmente inúteis e desnecessários.

Direct treatment costs of HIV/AIDS in Portugal

OBJECTIVE To analyze the direct medical costs of HIV/AIDS in Portugal from the perspective of the National Health Service. METHODS A retrospective analysis of medical records was conducted for 150 patients from five specialized centers in Portugal in 2008. Data on utilization of medical resources during 12 months and patients’ characteristics were collected. A unit cost was applied to each care component using official sources and accounting data from National Health Service hospitals. RESULTS The average cost of treatment was 14,277 €/patient/year. The main cost-driver was antiretroviral treatment (€ 9,598), followed by hospitalization costs (€ 1,323). Treatment costs increased with the severity of disease from € 11,901 (> 500 CD4 cells/µl) to € 23,351 (CD4 count ≤ 50 cells/ µl). Cost progression was mainly due to the increase in hospitalization costs, while antiretroviral treatment costs remained stable over disease stages. CONCLUSIONS The high burden related to antiretroviral treatment is counterbalanced by relatively low hospitalization costs, which, however, increase with severity of disease. The relatively modest progression of total costs highlights that alternative public health strategies that do not affect transmission of disease may only have a limited impact on expenditure, since treatment costs are largely dominated by constant antiretroviral treatment costs.

Trends in public health policies addressing violence against women

OBJECTIVE To analyze the content of policies and action plans within the public healthcare system that addresses the issue of violence against women.METHODS A descriptive and comparative study was conducted on the health policies and plans in Catalonia and Costa Rica from 2005 to 2011. It uses a qualitative methodology with documentary analysis. It is classified by topics that describe and interpret the contents. We considered dimensions, such as principles, strategies, concepts concerning violence against women, health trends, and evaluations.RESULTS Thirteen public policy documents were analyzed. In both countries’ contexts, we have provided an overview of violence against women as a problem whose roots are in gender inequality. The strategies of gender policies that address violence against women are cultural exchange and institutional action within the public healthcare system. The actions of the healthcare sector are expanded into specific plans. The priorities and specificity of actions in healthcare plans were the distinguishing features between the two countries.CONCLUSIONS The common features of the healthcare plans in both the counties include violence against women, use of protocols, detection tasks, care and recovery for women, and professional self-care. Catalonia does not consider healthcare actions with aggressors. Costa Rica has a lower specificity in conceptualization and protocol patterns, as well as a lack of updates concerning health standards in Catalonia.

Lifestyle factors, direct and indirect costs for a Brazilian airline company

OBJECTIVE To analyze lifestyle risk factors related to direct healthcare costs and the indirect costs due to sick leave among workers of an airline company in Brazil. METHODS In this longitudinal 12-month study of 2,201 employees of a Brazilian airline company, the costs of sick leave and healthcare were the primary outcomes of interest. Information on the independent variables, such as gender, age, educational level, type of work, stress, and lifestyle-related factors (body mass index, physical activity, and smoking), was collected using a questionnaire on enrolment in the study. Data on sick leave days were available from the company register, and data on healthcare costs were obtained from insurance records. Multivariate linear regression analysis was used to investigate the association between direct and indirect healthcare costs with sociodemographic, work, and lifestyle-related factors. RESULTS Over the 12-month study period, the average direct healthcare expenditure per worker was US$505.00 and the average indirect cost because of sick leave was US$249.00 per worker. Direct costs were more than twice the indirect costs and both were higher in women. Body mass index was a determinant of direct costs and smoking was a determinant of indirect costs. CONCLUSIONS Obesity and smoking among workers in a Brazilian airline company were associated with increased health costs. Therefore, promoting a healthy diet, physical activity, and anti-tobacco campaigns are important targets for health promotion in this study population.

Violence against metropolitan bus drivers and fare collectors in Brazil

OBJECTIVE To analyze the correlation between sociodemographic factors and working conditions of bus workers in a metropolitan area and violence against them.METHODS This cross-sectional study used a nonprobabilistic sample estimated according to the number of workers employed in bus companies located in three cities in the Belo Horizonte metropolitan region in 2012 (N = 17,470). Face-to-face interviews were conducted using a digital questionnaire. The factors associated with violence were analyzed in two stages using Poisson regression, according to each level. The magnitude of the association was evaluated using prevalence ratios with robust variance and a statistical significance of 5%, and 95% confidence intervals were obtained.RESULTS The study sample comprised 782 drivers and 691 fare collectors; 45.0% participants reported at least one act of violence in the workplace in the last 12 months, with passengers being predominantly responsible. The age of the bus workers was inversely associated with violence. Chronic diseases, sickness absenteeism, and working conditions were also associated with violence.CONCLUSIONS The findings on the correlation between violence and working conditions are essential for implementing prevention strategies by transportation service managers.

Polio inactivated vaccine costs into routine childhood immunization in Brazil

OBJECTIVE To analyze the costs of vaccination regimens for introducing inactivated polio vaccine in routine immunization in Brazil.METHODS A cost analysis was conducted for vaccines in five vaccination regimens, including inactivated polio vaccine, compared with the oral polio vaccine-only regimen. The costs of the vaccines were estimated for routine use and for the “National Immunization Days”, during when the oral polio vaccine is administered to children aged less than five years, independent of their vaccine status, and the strategic stock of inactivated polio vaccine. The presented estimated costs are of 2011.RESULTS The annual costs of the oral vaccine-only program (routine and two National Immunization Days) were estimated at US$19,873,170. The incremental costs of inclusion of the inactivated vaccine depended on the number of vaccine doses, presentation of the vaccine (bottles with single dose or ten doses), and number of “National Immunization Days” carried out. The cost of the regimen adopted with two doses of inactivated vaccine followed by three doses of oral vaccine and one “National Immunization Day” was estimated at US$29,653,539. The concomitant replacement of the DTPw/Hib and HepB vaccines with the pentavalent vaccine enabled the introduction of the inactivated polio without increasing the number of injections or number of visits needed to complete the vaccination.CONCLUSIONS The introduction of the inactivated vaccine increased the annual costs of the polio vaccines by 49.2% compared with the oral vaccine-only regimen. This increase represented 1.13% of the expenditure of the National Immunization Program on the purchase of vaccines in 2011.