Preparation of an extruded fish snack using twin screw extruder and the storage characteristics of the product

A value-added extruded fish product was prepared with corn flour (80%) and fish (sciaenid) powder (20%), using a twin-screw extruder. The effect of different parameters like moisture, temperature, fish powder concentration, speed of the extruder and die-diameter on expansion ratio and crisp texture were studied. The storage characteristics of the final product were studied using three different types of packaging under nitrogen flushing. The study revealed that aluminum foil is the best packaging material to keep the product acceptable for more than three months.

Preparation of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition

Tetrahedrally bonded amorphous carbon (ta-C) and nitrogen doped (ta-C:N) films were obtained at room temperature in a filtered cathodic vacuum arc (FCVA) system incorporating an off-plane double bend (S-bend) magnetic filter. The influence of the negative bias voltage applied to substrates (from -20 to -350 V) and the nitrogen background pressure (up to 10-3 Torr) on film properties was studied by scanning electron microscopy (SEM), electron energy loss spectroscopy (EELS), Raman spectroscopy, X-ray photoemission spectroscopy (XPS), secondary ion mass spectroscopy (SIMS) and X-ray reflectivity (XRR). The ta-C films showed sp3 fractions between 84% and 88%, and mass densities around 3.2 g/cm3 in the wide range of bias voltage studied. In contrast, the compressive stress showed a maximum value of 11 GPa for bias voltages around -90 V, whereas for lower and higher bias voltages the stress decreased to 6 GPa. As for the ta-C:N films grown at bias voltages below -200 V and with N contents up to 7%, it has been found that the N atoms were preferentially sp3 bonded to the carbon network with a reduction in stress below 8 GPa. Further increase in bias voltage or N content increased the sp2 fraction, leading to a reduction in film density to 2.7 g/cm3.

Studies on the preparation of fish silage. 1. Effect of quality of raw material and type of acid

An experiment was undertaken in which silver bellies (Leiognathus splendens) of different quality were used to produce silages using different concentrations of hydrochloric acid and formic acid. The quality and storage life of the various preparations are reported. Silages which keep for at least 30 days can be produced from silver belly held for 3 or 12 hours at 28°C by: 1) reducing the pH by addition of hydrochloric acid; 2) adding 0.5% formic acid and reducing the pH to 3.5 with hydrochloric acid; or 3) adding 2.5% formic acid.

Studies on the preparation of fish silage. 2. Rate of liquefaction in different parts of silver belly

An experiment was undertaken to determine from which part of silver belly (Leiognathus splendens) carcasses originate the autolytic enzymes responsible for liquefaction of silage. Findings show that it is important to leave head and viscera present in order to get a satisfactory liquefaction in silage prepared from silver belly using 3.5% formic acid. The storage life of silage produced from various parts of the fish carcasses is also discussed.

Studies on the preparation of fish silage. 3. Dried silage products

An investigation was undertaken on the production of dried products from silver belly (Leiognathus splendens) silage mixed with plant filter materials. Silages produced using hydrochloric acid and/or formic acid when mixed with rice bran or maize meal and dried, yielded powders having an acceptable appearance and a pleasant odour, which are suitable for use in compounded chicken feeds.

Studies on the preparation of fish silage. 4. Economics of production

Economic aspects of producing liquid and dried silage from silver belly (Leiognathus splendens) in Sri Lanka are considered. A discounted cash flow analysis for the production of a dried fish silage/rice bran product suitable for use in compounded poultry feeds shows that the internal rate of return for a 10-year project would be between 34-77% and for a 5-year project between 26-73%. Thus it is concluded that the project would be extremely profitable.

Standardisation of recipe for the preparation of lobster analogues

Lobster analogues were prepared with lobster base flavour (paste),h lobster cook water (whole lobster omogenate:water, 1:1 and 1:0.5) and lobster meat mince. In another experiment, different combinations of ginger-garlic paste and lobster base flavour, i.e., 1:3, 1:4, 1:6, 3:3, 3:4, 3:6, 5:3, 5:4 and 5:6 were added to the lobster analogue paste. It was observed that lobster analogues prepared with lobster base flavour (paste) are suitable organoleptically. The combination of ginger garlic paste and lobster base flavour in the ratio of 3:4 was found to be suitable organoleptically. Lobster analogues coloured with annatto seed colour at 1:2 (annatto seed:water) concentration had high values for the colour attribute as compared to orange-red synthetic colour, beetroot colour, caramel colour and paprika colour. It was observed that come-up-time to achieve a temperature of850°C was 28 minutes with a processing period of 11 minutes.

A method for the preparation of cooked-peeled-frozen prawns

Several consignments of cooked-peeled-frozen prawns exported from India were rejected last year due to high total plate count (TPC) at 30°C. The specified temperature of incubation for TPC in our country is 37°C. Hence the effect of incubation at 30 and 37°C on TPC was studied. It is seen that the count is higher on incubation at 30°C. A method for production of cooked-peeled-frozen prawns conforming to the specification for TPC at 30°C is standardized and is reported. It consists of recooking the cooked-peeled prawns followed by packing and freezing without further contamination. The method minimizes batch to batch or sample to sample variation in TPC.

Preparation of Masmin: an improved method

An improved method for the preparation of Masmin the traditional smoked tuna of the Lakshadweep is described.

Preparation of edible powder from Jawla (Acetes sp.) prawns

Four methods were employed for the preparation of prawn (Acetes) powder in this study. The analytical characteristics and bacteriological quality of the edible powders are presented for each method.

Beverage preparation from fish hydrolysate

A method for the preparation of energy food incorporating fish hydrolysates, sugar, cocoa, malt extract etc. is described. The product has good consumer appeal. The preparation does not impart any bitter taste of the hydrolysate to the final product irrespective of the type of fish used for preparing the hydrolysate. It freely mixes with hot or cold milk and the resulting drink is adjudged to be very palatable.

Preparation of smoke cured fillets from oil sardine

A method of preparation of smoke cured fillets of oil sardine is described. Various procedural steps like brining, smoking, packaging etc. have been described and the shelf life assessed. Sodium propionate treatment is recommended to enhance storage life; BHA to control rancidity; and thermal treatment to overcome the insect infestation. The product has good consumer appeal.

Preparation and storage behaviour of fish protein biscuits

This paper deals with the investigations carried out on the preparation and storage characteristics of protein enriched biscuits (sweet and salt), incorporated with partially de-odourised fish protein concentrate. The product contains more than 20% protein and has storage life exceeding 6 months at room temperature (21°C to 32°C), in 400 gauge polythene bags.

Preparation of mussel meat by drying

The paper describes a simple and cheap process for the preservation of mussel meat by drying. The method involves blanching the mussel meat shucked from purified live mussels in 5% boiling brine for 5 min followed by drying to moisture of 10 to 15%. The product stored in glass bottles or polythene bags suitably sealed, has a storage life of about six months after which the organoleptic qualities begin to deteriorate. No preservative is used at any stage of processing and the yield of the product is approximately 20%. The major type of spoilage during storage is brown discoloration. Spoilage due to insect infestation is also common unless packed properly.

Preparation and storage of cutlet from low-priced fish

Cutlets have been prepared from the minces of lizard fish (Saurida tumbil), threadfin bream (Nemipterus japonicus), jew fish (Johnius dussumieri) and miscellaneous fish. The storage characteristics of cutlet (both raw and flash fried) at 4°C, -8°C and -20°C were studied. Cutlets prepared from the minced lizard fish showed the highest acceptability. Flash fried cutlets were found to be superior in quality compared to raw cutlets. The raw cutlet had storage life of 6 days, 11 weeks and 19 weeks at 4°C, -8°C and -20°C respectively and flash fried cutlets had a shelf life of 22 weeks at -20°C.