A Wavelength Tunable DBR Laser Integrated with an Electro Absorption Modulator by a Combined Method of SAG and QWI

We report a wavelength tunable electro-absorption modulated DBR laser based on a combined method of SAG and QWI. The threshold current is 37mA and the output power at 100mA gain current is 3.5mW. When coupled to a single-mode fiber with a coupling efficiency of 15% ,more than a 20dB extinction ratio is observed over the change of EAM bias from 0 to -2V. The 4.4nm continuous wavelength tuning range covers 6 channels on a 100GHz grid for WDM telecommunications.

An Electroabsorption Modulator Monolithically Integrated with a Semiconductor Optical Amplifier and a Dual-Waveguide Spot-Size Converter

A semiconductor optical amplifier and electroabsorption modulator monolithically integrated with a spotsize converter input and output is fabricated by means of selective area growth,quantum well intermixing,and asymmetric twin waveguide technology. A 1550-1600nm lossless operation with a high DC extinction ratio of 25dB and more than 10GHz 3dB bandwidth are successfully achieved. The output beam divergence angles of the device in the horizontal and vertical directions are as small as 7.3°× 18.0°, respectively, resulting in a 3.0dB coupling loss with a cleaved single-mode optical fiber.

1.55μm Laser Diode Monolithically Integrated with Spot-Size Converter Using Conventional Process

A novel 1.55μm laser diode with spot-size converter is designed and fabricated using conventional photolithography and chemical wet etching process.For the laser diode,a ridge double-core structure is employed.For the spot-size converter,a buried ridge double-core structure is incorporated.The laterally tapered active core is designed and optically combined with the thin and wide passive core to control the size of mode.The laser diode threshold current is measured to be 40mA together with high slop efficiency of 0.35W/A.The beam divergence angles in the horizontal and vertical directions are as small as 14.89°×18.18°,respectively,resulting in low-coupling losses with a cleaved optical fiber (3dB loss).

Novel electroabsorption modulator monolithically integrated with spot-size converter

A novel 1.55-μm spot-size converter integrated electroabsorption modulator was designed with conventional photolithography and chemical wet etching process. A ridge double-core structure was employed for the modulator, and a buried ridge double-core structure was incorporated for the spot-size converter. The passive waveguide was optically combined with a laterally tapered active waveguide to control the mode size. The figure of merit is 4.1667 dB/V(/100 μm) and the beam divergence angles in the horizontal and vertical directions were as small as 11.2 deg. and 13.0 deg., respectively.

Narrow-beam divergence 1.55μm laser diodes with integrated self-aligned spotsize conVerter

This paper describes the high performance of narrow-beam divergence spot size converter (SSC) integrated separately confined heterostructure (SCH) LD. The upper optical confinement layer (OCL) and the butt-coupled tapered thickness waveguide were regrown simultaneously, which not only offered the separated optimization of the active region and the integrated spotsize converter, but also reduced the difficulty of the butt-joint selective regrowth. The threshold current was as low as 5.4 mA, the output power at 55 mA was 10.1 mW, the vertical and horizontal far field divergence angles were as low as 9°and 15°, and the 1-dB misalignment tolerances were 3.6 and 3.4μm, respectively.

SOI thermo-optic modulator with fast response

Silicon-on-insulator (SOI) technology offers tremendous potential for integration of optoelectronic functionson a silicon wafer. In this letter, a 1 * 1 multimode interference (MMI) Mach-Zender interferometer(MZI) thermo-optic modulator fabricated by wet-etching method is demonstrated. The modulator has anextinction ratio of -11.0 dB, extra loss of -4.9 dB and power consumption of 420 mW. The response timeis less than 30μs.

SOI Waveguides Fabricated by Wet-Etching Method

SOI waveguides fabricated by wet-etching method are demonstrated. The single mode waveguide and 1×2 3dB BBI splitter are analyzed and designed by three dimensional beam propagation method to correct the error of effective index method and guided mode method. The devices are fabricated. Excellent performances, such as low propagation loss of -1.37dB/cm, low excess of -2.2dB, and good uniformity of 0.3dB, are achieved.

Spotsize Converter Integrated DFB Laser Diode Using Selective Area Growth of MOCVD

The characteristics of thickness enhancement factor and bandgap wavelength of selectively grown In-GaAsP are investigated. A high thickness enhancement factor of 2.9 is obtained. Spotsize converter integrated DFB lasers are fabricated by using the technique of SAG. The threshold current is as low as 10.8mA. The output power is 10m W at 60mA without coating and the SMSR is 35.8dB. The vertical far field angle (FWHM) is decreased from 34 °to 9 °. The tolerance of 1dBm misalignment is 3.4μm vertically.

On the Behavior of the Homogeneous Self-Dual Model for Conic Convex Optimization

There is a natural norm associated with a starting point of the homogeneous self-dual (HSD) embedding model for conic convex optimization. In this norm two measures of the HSD model’s behavior are precisely controlled independent of the problem instance: (i) the sizes of ε-optimal solutions, and (ii) the maximum distance of ε-optimal solutions to the boundary of the cone of the HSD variables. This norm is also useful in developing a stopping-rule theory for HSD-based interior-point methods such as SeDuMi. Under mild assumptions, we show that a standard stopping rule implicitly involves the sum of the sizes of the ε-optimal primal and dual solutions, as well as the size of the initial primal and dual infeasibility residuals. This theory suggests possible criteria for developing starting points for the homogeneous self-dual model that might improve the resulting solution time in practice

BRS Cometa: nova cultivar de feijoeiro comum com grão do tipo comercial carioca para a região do Distrito Federal.

ABSTRACT: During the years 2003 and 2004, four experiments were conducted in the winter season, under irrigation and in the raining season in the experimental area of the Embrapa Cerrados Research Center at Planaltina, Federal District. The objective was to identify cultivars that presented the following characteristics: resistance to diseases, high yield, resistance to lodging, desirable plant height and good market acceptance, to be indicated for cultivation in the Federal District. It was concluded that the cultivar BRS Cometa is indicated for this region, due to its high yield characteristics, resistance to diseases and lodging, excellent cooking qualities and erect type.

Are State legislatures responding to public opinion when allocating funds for tobacco control programs?

This study explored the factors associated with state-level allocations to tobacco-control programs. The primary research question was whether public sentiment regarding tobacco control was a significant factor in the states' 2001 budget decisions. In addition to public opinion, several additional political and economic measures were considered. Significant associations were found between our outcome, state-level tobacco-control funding per capita, and key variables of interest including public opinion, amount of tobacco settlement received, the party affiliation of the governor, the state's smoking rate, excise tax revenue received, and whether the state was a major producer of tobacco. The findings from this study supported our hypothesis that states with citizens who favor more restrictive indoor air policies allocate more to tobacco control. Effective public education to change public opinion and the cultural norms surrounding smoking may affect political decisions and, in turn, increase funding for crucial public health programs.

The effect of involuntary job loss on smoking intensity and relapse.

AIMS: To assess the impact of involuntary job loss due to plant closure or layoff on relapse to smoking and smoking intensity among older workers. DESIGN, PARTICIPANTS, SAMPLE: Data come from the Health and Retirement Study, a nationally representative survey of older Americans aged 51-61 in 1991 followed every 2 years beginning in 1992. The 3052 participants who were working at the initial wave and had any history of smoking comprise the main sample. METHODS: Primary outcomes are smoking relapse at wave 2 (1994) among baseline former smokers, and smoking quantity at wave 2 among baseline current smokers. As reported at the wave 2 follow-up, 6.8% of the sample experienced an involuntary job loss between waves 1 and 2. FINDINGS: Older workers have over two times greater odds of relapse subsequent to involuntary job loss than those who did not. Further, those who were current smokers prior to displacement that did not obtain new employment were found to be smoking more cigarettes, on average, post-job loss. CONCLUSIONS: The stress of job loss, along with other significant changes associated with leaving one's job, which would tend to increase cigarette consumption, must outweigh the financial hardship which would tend to reduce consumption. This highlights job loss as an important health risk factor for older smokers.

Health events and the smoking cessation of middle aged Americans.

This study investigates the effect of serious health events including new diagnoses of heart attacks, strokes, cancers, chronic lung disease, chronic heart failure, diabetes, and heart disease on future smoking status up to 6 years postevent. Data come from the Health and Retirement Study, a nationally representative longitudinal survey of Americans aged 51-61 in 1991, followed every 2 years from 1992 to 1998. Smoking status is evaluated at each of three follow-ups, (1994, 1996, and 1998) as a function of health events between each of the four waves. Acute and chronic health events are associated with much lower likelihood of smoking both in the wave immediately following the event and up to 6 years later. However, future events do not retrospectively predict past cessation. In sum, serious health events have substantial impacts on cessation rates of older smokers. Notably, these effects persist for as much as 6 years after a health event.

Reduction of quantity smoked predicts future cessation among older smokers.

AIM: To examine whether smokers who reduce their quantity of cigarettes smoked between two periods are more or less likely to quit subsequently. STUDY DESIGN: Data come from the Health and Retirement Study, a nationally representative survey of older Americans aged 51-61 in 1991 followed every 2 years from 1992 to 1998. The 2064 participants smoking at baseline and the first follow-up comprise the main sample. MEASUREMENTS: Smoking cessation by 1996 is examined as the primary outcome. A secondary outcome is relapse by 1998. Spontaneous changes in smoking quantity between the first two waves make up the key predictor variables. Control variables include gender, age, education, race, marital status, alcohol use, psychiatric problems, acute or chronic health problems and smoking quantity. FINDINGS: Large (over 50%) and even moderate (25-50%) reductions in quantity smoked between 1992 and 1994 predict prospectively increased likelihood of cessation in 1996 compared to no change in quantity (OR 2.96, P<0.001 and OR 1.61, P<0.01, respectively). Additionally, those who reduced and then quit were somewhat less likely to relapse by 1998 than those who did not reduce in the 2 years prior to quitting. CONCLUSIONS: Reducing successfully the quantity of cigarettes smoked appears to have a beneficial effect on future cessation likelihood, even after controlling for initial smoking level and other variables known to impact smoking cessation. These results indicate that the harm reduction strategy of reduced smoking warrants further study.