Evaluation and implementation process for commercial elevator landing doors

Tason ovet voivat olla joko itsesuunniteltuja ja -tehtyjä, tai itse malli ja tuote voidaan ostaa myös yrityksen ulkoa. Tätä make-or-buy kysymystä pohdittaessa ilmenee monta tekijää, jotka vaikuttavat päätökseen. Jos yritys käsittää ostamisen parempana vaihtoehtona, tuote tarvitsee myösimplementointisuunnitelman. Tämän työn päätavoite oli luoda arviointi- ja implementointiprosessi kaupallisille hissin tason oville. Muut tavoitteet olivat: selvittää syyt tälle erikoiselle toiminnolle, löytää kaupallisten ovien käyttöön liittyvät edut ja haitat, sekä luoda kriteerit tason ovien arvioinnille. Lopputuloksena saatiin, että tämän prosessin suorittajan pitää sitoutua arviointi- ja implementointiprosessiin,ja että myös virtuaalitehdas tarvitaan täydentämään arviointivaihetta. Mutta tärkein havainto oli, että tulevaisuuden ovistrategia ei ole vielä täysin päätetty ja siitä syystä yrityksen omat ovimallit pitäisi testata ja verrata niitä kaupallisiin ovimalleihin käyttämällä tämän työn arviointiprosessia.

A Legislator under Surveillance: The Creation and Implementation of Swiss Banking Legislation 1910-1934

This paper analyses how banking regulation was introduced in Switzerland - one of the world's most prominent financial centres - which remained in place until the beginning of the twenty-first century. It shows that the law adopted on 8 November 1934 is a perfect example of capture of the regulator by the regulated. Essentially a political response in the context of the economic crisis of the 1930s, it largely reflected the interests of banking circles by limiting the intervention of the State as much as possible. The introduction of the new legislation was facilitated by the temporary weakness of Swiss banking circles, as they depended on the State to delay or prevent the collapse of many major credit institutions. They did not manage to derail the law as they had two decades earlier when they scuppered the federal bill on banks drawn up between 1914 and 1916. But this time they were better organized and more united, and intervened all the more effectively in the legislative process itself. The 1934 law is thus distinctive in that it made no structural changes to the architecture of the financial centre but merely codified its practices through flexible legislation meant to reassure the public. The law was aimed less at controlling banking activity than at keeping - thanks to skilfully calibrated political concessions - the State from having to intervene more directly in the internal management of banks or in the fixing of interest rates and the export of capital.

Strategy Formulation and Implementation Case of High Tech Instruments

The strategy process is a method for strategy formulation and implementation. The strategy process is commonly used especially within bigger companies. It is important to link the strategy formulation and implementation. The objective of this thesis has been to find out improvement areas for the case company’s strategy process. The theoretical framework based on literature emphasizes on strategy process as a method for strategy formulation and implementation. The theoretical framework, several mainly ad hoc interviews and author’s observation were used as tools to analyze the case company’s strategy process. The hierarchy in between the various corporate levels provides the foundation to formulate and implement the strategies. These strategies include the corporate and strategic business area level strategies. The recommendations to improve the case company’s strategy process were formulated at corporate and strategic business area levels. These recommendations were formulated based on research and experience gained throughout the work. The role of strategic projects to implement the strategies more efficiently and organizational control over distribution were found as potential improvement areas. The resource allocation prioritizing towards the most important strategic projects was also an important improvement area.

Genomics of clinal variation in Drosophila: disentangling the interactions of selection and demography.

Clines in phenotypes and genotype frequencies across environmental gradients are commonly taken as evidence for spatially varying selection. Classical examples include the latitudinal clines in various species of Drosophila, which often occur in parallel fashion on multiple continents. Today, genomewide analysis of such clinal systems provides a fantastic opportunity for unravelling the genetics of adaptation, yet major challenges remain. A well-known but often neglected problem is that demographic processes can also generate clinality, independent of or coincident with selection. A closely related issue is how to identify true genic targets of clinal selection. In this issue of Molecular Ecology, three studies illustrate these challenges and how they might be met. Bergland et al. report evidence suggesting that the well-known parallel latitudinal clines in North American and Australian D. melanogaster are confounded by admixture from Africa and Europe, highlighting the importance of distinguishing demographic from adaptive clines. In a companion study, Machado et al. provide the first genomic comparison of latitudinal differentiation in D. melanogaster and its sister species D. simulans. While D. simulans is less clinal than D. melanogaster, a significant fraction of clinal genes is shared between both species, suggesting the existence of convergent adaptation to clinaly varying selection pressures. Finally, by drawing on several independent sources of evidence, Bo?ičević et al. identify a functional network of eight clinal genes that are likely involved in cold adaptation. Together, these studies remind us that clinality does not necessarily imply selection and that separating adaptive signal from demographic noise requires great effort and care.

Creating a research network for a successful e-portfolio design and implementation

The presence of e-portfolios in educational centres, companies and administrations has emergedstrongly during the last years by creating very different practices coming from different objectives and purposes. This situation has led researchers and practitioners to design and implement e-portfolios with little reference to previous knowledge of them; consequently, developments are disparate with many of the processes and dimensions used both in development and use being unnecessary complex. In order to minimize the inconveniences, unify these developmental processes and improve the resultsof implementation and use of e-portfolios, it seemed necessary to create a network of researchers, teachers and trainers coming from different universities and institutions of different kinds who are interested in the investigation and the practice of e-portfolios in Spain. Therefore, The Network on e-portfoliowas created in 2006, funded by the Spanish Ministry of Education and led by the UniversitatOberta de Catalunya. Besides the goals associatedwith the creation of this network and which wewanted to share with other European researchers and experts of other continents, we will also present in this paper some data concerned with the first study carried out on the use of e-portfolios in our country that shows where we are and which trends are the most important for the near future.

A Sparse Bayesian Approach for Joint Feature Selection and Classifier Learning

Peer-reviewed

Design and implementation of a multipurpose reactor for scale-up studies

In the theoretical part, the different polymerisation catalysts are introduced and the phenomena related to mixing in the stirred tank reactor are presented. Also the advantages and challenges related to scale-up are discussed. The aim of the applied part was to design and implement an intermediate-sized reactor useful for scale-up studies. The reactor setting was tested making one batch of Ziegler–Natta polypropylene catalyst. The catalyst preparation with a designed equipment setting succeeded and the catalyst was analysed. The analyses of the catalyst were done, because the properties of the catalyst were compared to the normal properties of Ziegler–Natta polypropylene catalyst. The total titanium content of the catalyst was slightly higher than in normal Ziegler–Natta polypropylene catalyst, but the magnesium and aluminium content of the catalyst were in the normal level. By adjusting the siphonation tube and adding one washing step the titanium content of the catalyst could be decreased. The particle size of the catalyst was small, but the activity was in a normal range. The size of the catalyst particles could be increased by decreasing the stirring speed. During the test run, it was noticed that some improvements for the designed equipment setting could be done. For example more valves for the chemical feed line need to be added to ensure inert conditions during the catalyst preparation. Also nitrogen for the reactor needs to separate from other nitrogen line. With this change the pressure in the reactor can be kept as desired during the catalyst preparation. The proposals for improvements are presented in the applied part. After these improvements are done, the equipment setting is ready for start-up. The computational fluid dynamics model for the designed reactor was provided by cooperation with Lappeenranta University of Technology. The experiments showed that for adequate mixing with one impeller, stirring speed of 600 rpm is needed. The computational fluid dynamics model with two impellers showed that there was no difference in the mixing efficiency if the upper impeller were pumping downwards or upwards.

Toiminnanohjausjärjestelmän implementointiprosessin ongelmat

Työn tavoitteena on kirjallisuutta tutkien etsiä toiminnanohjausjärjestelmän implementointiprosessissa esiintyviä ongelmia ja niiden ratkaisuja. Löydetyt ongelmat liittyvät suurelta osin yrityksen johtoon, projektipäällikköön ja -ryhmään, ohjelmistoon sekä loppukäyttäjiin. Suurimmat ongelmat koskevat muutoskäyttäytymistä, projektin johtamista eri muodoissa, ohjelmiston valintaa sekä työntekijöiden kouluttamista. Työn sisältönä on kirjallisuuskatsaus ongelmista ja menestystekijöistä implementointiprosessissa sekä erilaisten ratkaisu- ja toimintamallien esittäminen ongelmien ratkaisemiseksi. Lopputuloksena on opas, jonka avulla implementointiprosessi voidaan viedä menestyksekkäästi loppuun asti.

Design and Implementation of MUPE Server Context Tool for Eclipse IDE

The development of software tools begun as the first computers were built. The current generation of development environments offers a common interface to access multiple software tools and often also provide a possibility to build custom tools as extensions to the existing development environment. Eclipse is an open source development environment that offers good starting point for developing custom extensions. This thesis presents a software tool to aid the development of context-aware applications on Multi-User Publishing Environment (MUPE) platform. The tool is implemented as an Eclipse plug-in. The tool allows developer to include external server side contexts to their MUPE applications. The tool allows additional context sources to be added through the Eclipse's extension point mechanism. The thesis describes how the tool was designed and implemented. The implementation consists of tool core component part and an additional context source extension part. Tool core component is responsible for the actual context addition and also provides the needed user interface elements to the Eclipse workbench. Context source component provides the needed context source related information to the core component. As part of the work an update site feature was also implemented for distributing the tool through Eclipse update mechanism.

The Progress and Challenges of the e-Government Initiatives and Implementation in the Kurdistan Region of Iraq

The Electronic Government (e-Government) means delivering the services and information to the citizens and businesses through the use of Information and Communication Technology (ICT) in order to enable them to interact more effectively with the government, and to increase the quality of the services. As many other governments in the developed and developing countries, the Kurdistan Regional Government (KRG) has embarked on the e-Government initiatives. This study revealed that there are various challenges which affect the e-Government in the Kurdistan Region of Iraq (KRI), but also a lot of e-Government progress has happened. In addition, based on the United Nations’ e-Government maturity level benchmarking, the e-Government in the KRI is at the interactive stage. In this study the services that the citizens want from the government in order to implement an appropriate e-Government were also identified.

Design and implementation of robot gripper interface

This thesis presents a design for an asynchronous interface to Robotiq adaptive gripper s-model. Designed interface is a communication layer that works on top of modbus layer. The design contains function definitions, finite state machine and exceptions. The design was not fully implemented but enough was so that it can be used. The implementation was done with c++ in linux environment. Additionally to the implementation a simple demo program was made to show the interface is used. Also grippers closing speed and force were measured. There is also a brief introduction into robotics and robot grasping.

Automatic system identification and optimization of centrifugal pump operation

Centrifugal pumps are a notable end-consumer of electrical energy. Typical application of a centrifugal pump is the filling or emptying of a reservoir tank, where the pump is often operated at a constant speed until the process is completed. Installing a frequency converter to control the motor substitutes the traditional fixed-speed pumping system, allows the optimization of rotational speed profile for the pumping tasks and enables the estimation of rotational speed and shaft torque of an induction motor without any additional measurements from the motor shaft. Utilization of variable-speed operation provides the possibility to decrease the overall energy consumption of the pumping task. The static head of the pumping process may change during the pumping task. In such systems, the minimum rotational speed changes during reservoir filling or emptying, and the minimum energy consumption can’t be achieved with a fixed rotational speed. This thesis presents embedded algorithms to automatically identify, optimize and monitor pumping processes between supply and destination reservoirs, and evaluates the changing static head –based optimization method.

Design and implementation of a production synchronization extension for Microsoft Dynamics AX

In a just-in-time, assemble-to-order production environments the scheduling of material requirements and production tasks - even though difficult - is of paramount importance. Different enterprise resource planning solutions with master scheduling functionality have been created to ease this problem and work as expected unless there is a problem in the material flow. This case-based candidate’s thesis introduces a tool for Microsoft Dynamics AX multisite environment, that can be used by site managers and production coordinators to get an overview of the current open sales order base and prioritize production in the event of material shortouts to avoid part-deliveries.

The Use of Nervous System Drugs and the Risk of Fractures in Old Adults

Hermostoon vaikuttavien lääkkeiden käyttö on yleistä iäkkäässä väestössä. Erityisen yleistä käyttö on pitkäaikaisessa laitoshoidossa asuvilla iäkkäillä. Hermostoon vaikuttavien lääkkeiden haittavaikutuksia on tutkittu paljon, ja useat hermostoon vaikuttavat lääkeaineryhmät on tunnistettu murtumien riskitekijöiksi. Aikaisemmin ei ole kuitenkaan tutkittu usean hermostoon vaikuttavan lääkkeen yhteiskäytön yhteyksiä murtuman riskiin 65 vuotta täyttäneillä. Väitöskirjatutkimuksessa havaittiin, että usean hermostoon vaikuttavan lääkeaineen yhtäaikainen käyttö oli hyvin yleistä Porin kaupunginsairaalan viidellä pitkäaikaisen laitoshoidon osastolla (n = 154) vuosien 2004 ja 2005 vaihteessa. Kolmasosa tutkituista käytti säännöllisesti kolmea tai useampaa hermostoon vaikuttavaa lääkettä samanaikaisesti. Kun huomioitiin myös tarvittaessa otettavat lääkkeet, vastaava luku oli 53 %. Tutkimuksessa havaittiin myös viitteitä lääkkeiden epäasianmukaisesta käytöstä, kun potilaiden käyttämiä lääkkeitä verrattiin heidän kognitiiviseen ja fyysiseen suorituskyynsä sekä asetettuihin diagnooseihin. Liedon kunnassa 1990-luvulla toteutettuun väestöpohjaiseen Liedon Iäkkäät -seurantatutkimukseen osallistui 1177 lietolaista 65 vuotta täyttänyttä. Lääkitystietoja sekä seuranta-aikana tapahtuneita murtumia analysoimalla havaittiin, että kahden tai useamman bentsodiatsepiinin sekä kahden tai useamman psykoosilääkkeen käyttö oli yhteydessä murtuman riskiin 65 vuotta täyttäneillä miehillä. Opioidin ja psykoosilääkkeen yhteiskäyttö sekä opioidin ja bentsodiatsepiinin yhteiskäyttö oli yhteydessä iäkkäiden miesten murtuman riskiin. Naisilla vastaavia tilastollisesti merkitseviä yhteyksiä ei havaittu. Väitöskirjatutkimuksen uusin osa-aineisto perustui Porissa vuosina 2009–2010 toteutetun Satauni-tutkimuksen aineistoon. Tutkimuksessa osoitettiin 89 potilaan aineistossa, että hallittu, yhden kuukauden aikana lääkärin ja hoitajan tuella toteutettu bentsodiatsepiinivieroitus paransi merkitsevästi 55 vuotta täyttäneiden naisten käden puristusvoimaa kuuden kuukauden seuranta-aikana. Vastaavaa yhteyttä ei havaittu miehillä. Bentsodiatsepiinivieroituksella ei ollut yhteyttä osallistujien tasapainotestin tulosten paranemiseen kuuden kuukauden seurantaaikana. Murtumilla on vakavia seurauksia sekä yksilötasolla että yhteiskunnallisesti iäkkäässä väestössä. Murtumien ehkäisy on hyvin tärkeää. Siinä tulee kiinnittää huomiota potilaan käyttämään lääkitykseen ja arvioida erityisesti usean hermostoon vaikuttavan lääkkeen yhteiskäytön tarpeellisuutta.

PDM system functions and utilizations analysis to improve efficiency of sheet metal product design and manufacturing

This study will concentrate on Product Data Management (PDM) systems, and sheet metal design features and classification. In this thesis, PDM is seen as an individual system which handles all product-related data and information. The meaning of relevant data is to take the manufacturing process further with fewer errors. The features of sheet metals are giving more information and value to the designed models. The possibility of implementing PDM and sheet metal features recognition are the core of this study. Their integration should make the design process faster and manufacturing-friendly products easier to design. The triangulation method is the basis for this research. The sections of this triangle are: scientific literature review, interview using the Delphi method and the author’s experience and observations. The main key findings of this study are: (1) the area of focus in triangle (the triangle of three different point of views: business, information exchange and technical) depends on the person’s background and their role in the company, (2) the classification in the PDM system (and also in the CAD system) should be done using the materials, tools and machines that are in use in the company and (3) the design process has to be more effective because of the increase of industrial production, sheet metal blank production and the designer’s time spent on actual design and (4) because Design For Manufacture (DFM) integration can be done with CAD-programs, DFM integration with the PDM system should also be possible.