Clinical Use of EEG in the ICU: Technical Setting.

Neurophysiology is an essential tool for clinicians dealing with patients in the intensive care unit. Because of consciousness disorders, clinical examination is frequently limited. In this setting, neurophysiological examination provides valuable information about seizure detection, treatment guidance, and neurological outcome. However, to acquire reliable signals, some technical precautions need to be known. EEG is prone to artifacts, and the intensive care unit environment is rich in artifact sources (electrical devices including mechanical ventilation, dialysis, and sedative medications, and frequent noise, etc.). This review will discuss and summarize the current technical guidelines for EEG acquisition and also some practical pitfalls specific for the intensive care unit.

Stratégies de communication au service de la formation: quelques outils pratiques [Effective communication strategies to frame the trainer-trainee dialogue in the clinical setting].

Communication between trainer and trainee plays a central role in teaching and learning in the clinical environment. There are various strategies to frame the dialogue between trainee and trainer. These strategies allow trainers to be more effective in their supervision, which is important in our busy clinical environment. Communication strategies are well adapted to both in- and out-patient settings, to both under- and postgraduate contexts. This article presents three strategies that we think are particularly useful. They are meant to give feedback, to ask questions and to present a case.

Learning analytics in practice: setting up a laboratory for action research at the Universitat Oberta de Catalunya

Since its inception in 1994 as a purely online university, the Universitat Oberta de Catalunya(UOC) has been able to position itself among the main universities of the Catalan and Spanish university systems. Most of the students at the UOC (currently more than 60,000) are adults who have a profile that could hardly fit into the traditional university system, thus finding in the UOC an opportunity to start or continue their higher education grades, in a very innovative environment. The intensive use of ICT for both theteaching/learning processes and management allowsresearchers and practitioners to obtain data aboutwhat takes place in the UOC Virtual Campus, which is continuously being improved according to suchfindings.

Manipulador robótico con visión artificial

En los tiempos que corren la robótica forma uno de los pilares más importantes en la industria y una gran noticia para los ingenieros es la referente a las ventas de estos, ya que en 2013, unos 179.000 robots industriales se vendieron en todo el mundo, de nuevo un máximo histórico y un 12% más que en 2012 según datos de la IFR (International Federation of Robotics). Junto a esta noticia, la robótica colaborativa entra en juego en el momento que los robots y los seres humanos deben compartir el lugar de trabajo sin que nos veamos excluidos por las maquinas, por lo tanto lo que se intenta es que los robots mejoren la calidad del trabajo al hacerse cargo de los trabajos peligrosos, tediosos y sucios que no son posibles o seguros para los seres humanos. Otro concepto muy importante y directamente relacionado con lo anterior que está muy en boga y se escucha desde hace relativamente poco tiempo es el de la fabrica del futuro o “Factory Of The Future” la cual intenta que los operarios y los robots encuentren la sintonía en el entorno laboral y que los robots se consideren como maquinaria colaborativa y no como sustitutiva, considerándose como uno de los grandes nichos productivos en plena expansión. Dejando a un lado estos conceptos técnicos que nunca debemos olvidar si nuestra carrera profesional va enfocada en este ámbito industrial, el tema central de este proyecto está basado, como no podía ser de otro modo, en la robótica, que junto con la visión artificial, el resultado de esta fusión, ha dado un manipulador robótico al que se le ha dotado de cierta “inteligencia”. Se ha planteado un sencillo pero posible proceso de producción el cual es capaz de almacenar piezas de diferente forma y color de una forma autónoma solamente guiado por la imagen capturada con una webcam integrada en el equipo. El sistema consiste en una estructura soporte delimitada por una zona de trabajo en la cual se superponen unas piezas diseñadas al efecto las cuales deben ser almacenadas en su lugar correspondiente por el manipulador robótico. Dicho manipulador de cinemática paralela está basado en la tecnología de cables, comandado por cuatro motores que le dan tres grados de libertad (±X, ±Y, ±Z) donde el efector se encuentra suspendido sobre la zona de trabajo moviéndose de forma que es capaz de identificar las características de las piezas en situación, color y forma para ser almacenadas de una forma ordenada según unas premisas iníciales.

La construcción narrativa de la identidad en un contexto educativo intercultural = The narrative construction of identity in a intercultural educative setting

En este trabajo se expone e ilustra un modelo teórico para entender las funciones de la identidad, así como los mecanismospsicosociales asociados a su construcción: “Modelo Evolutivo y Funcional de la Identidad Mediada” (MEBIM). La identidad, mediada narrativamente, cumple una función personal orientada a la dirección de la propia vida, así como una función sociocultural vinculada a la búsqueda de reconocimiento de los derechos de los grupos sociales a los que uno se siente apegado. Se ilustran los factores asociados a la construcción de la identidad personal (sí mismos posibles, transiciones vitales, vínculo afectivo) y sociocultural (acción-transformación e identificación simbólica) a partir de 12 historias de vida realizadas con mestizos e indígenasde la Universidad Intercultural de Chiapas (México). Se sugiere que en contextos educativos formales, como la escuela o la Universidad, se deben propiciar narrativas personales y socioculturales con el objetivo de optimizar la identidad en un mundo a la vez globalizado y plural

Setting priorities in clinical and health services research: Properties of an adapted and updated method

Objectives: The objectives of this study is to review the set of criteria of the Institute of Medicine (IOM) for priority-setting in research with addition of new criteria if necessary, and to develop and evaluate the reliability and validity of the final priority score. Methods: Based on the evaluation of 199 research topics, forty-five experts identified additional criteria for priority-setting, rated their relevance, and ranked and weighted them in a three-round modified Delphi technique. A final priority score was developed and evaluated. Internal consistency, test–retest and inter-rater reliability were assessed. Correlation with experts’ overall qualitative topic ratings were assessed as an approximation to validity. Results: All seven original IOM criteria were considered relevant and two new criteria were added (“potential for translation into practice”, and “need for knowledge”). Final ranks and relative weights differed from those of the original IOM criteria: “research impact on health outcomes” was considered the most important criterion (4.23), as opposed to “burden of disease” (3.92). Cronbach’s alpha (0.75) and test–retest stability (interclass correlation coefficient = 0.66) for the final set of criteria were acceptable. The area under the receiver operating characteristic curve for overall assessment of priority was 0.66. Conclusions: A reliable instrument for prioritizing topics in clinical and health services research has been developed. Further evaluation of its validity and impact on selecting research topics is required

Salesperson's customer orientation in the personal selling process and in the use of personal selling techniques in the business-to-business setting

Selling is much maligned, often under-valued subject whose inadequate showing in business schools is in inverse proportion to the many job opportunities it offers and the importance of salespeople bringing incomes to companies. The purpose of this research is to increase the understanding of customer-oriented selling and examine the influence of customer-oriented philosophy on selling process, the applicability of selling techniques to this philosophy and the importance of them to salespeople. The empirical section of the study is two-fold. Firstly, the data of qualitative part was collected by conducting five thematic interviews among sales consultants and case company representatives. The findings of the study indicate that customer-oriented selling requires the activity of salespeople. In the customer-oriented personal selling process, salespeople invest time in the preplanning, the need analysis and the benefit demonstration stages. However, the findings propose that salespeople today must also have the basic capabilities for executing the traditional sales process, and the balance between traditional and consultative selling process will change as the duration of the relationship between the salesperson and customer increases. The study also proposes that selling techniques still belong to the customer-oriented selling process, although their roles might be modest. This thesis mapped 75 selling techniques and the quantitative part of the study explored what selling techniques are considered to be important by salespeople in direct selling industry when they make sales with new and existing customers. Response rate of the survey was 69.5%.

Determinants of credit default swap spread, the effect of the financial crisis in the us markets

The purpose of this study is to define what determinants affect the Credit spread. There are two theoretical frameworks to study this: structural models and reduced form models. Structural models indicate that the main determinants are company leverage, volatility and risk-free interest rate, and other market and firm-specific variables. The purpose is to determine which of these theoretical determinants can explain the CDS spread and also how these theoretical determinants are affected by the financial crisis in 2007. The data is collected from 30 companies in the US Markets, mainly S&P Large Cap. The sample time-frame is 31.1.2004 – 31.12.2009. Empirical studies indicate that structural models can explain the CDS spreads well. Also, there were significant differences between bear and bull markets. The main determinants explaining CDS spreads were leverage and volatility. The other determinants were significant, depending on the sample period. However, these other variables did not explain the spread consistently.

Generic and professional caring in a Chinese setting: an ethnopraphic study

The objective of the present study is to describe the cultural care practices, meanings, values and beliefs which form the basis of caring in a Chinese context. The research has its starting point in a caring science perspective and a qualitative research approach with interpretative ethnography as methodological guideline. The theoretical perspective is formed by elements of the theory of caritative caring, developed by Eriksson, and the theory of Culture Care Diversity and Universality, developed by Leininger. Previous research of suffering, culture and caring is described and also a presentation of actual transcultural nursing research as well as a presentation of the social structure dimensions of Chinese culture is included in the theoretical background. The empirical part includes patients and relatives, nurses and Hu Gongs as informants. The data collected are analysed based on Geertz’s idea of forming “thick descriptions” through examining the “what, how and why” of people’s actions. The findings show that the family has a prominent position in Chinese caring practices. The patient plays an unobtrusive role and a mutual dependence between the patient and the family members is evident. The professional nursing care is an extended act which includes the family in the caring relationship. The care practices of the Chinese nurse are characterized by great professional nursing skills. Suffering is described by the informants as being caused by disease, pain and social circumstances. “Social suffering” is described as worse than physical or mental suffering. Culturally competent and congruent care is a prerequisite for avoiding cultural pain, imposition and blindness when caring for the suffering human being. The findings of the present study necessitate a broadening in caring theory to include the family in the caring relationship. A further conclusion is that a broadening in our perception and understanding of culture would promote the delivery of culturally competent and congruent care. Suffering need to be seen as enclosed in cultural patterns of how it is expressed, interpreted, understood and relieved. Care and caring need to be seen as embedded in culture and the care practices values and beliefs have to be congruent with the cultural patterns where the care is provided.

Studies in offset ink setting

The offset printing process is complex and involves the meeting of two essentially complex materials, printing ink and paper, upon which the final product is formed. It can therefore be expected that a multitude of chemical and physical interactions and mechanisms take place at the ink-paper interface. Interactions between ink and paper are of interest to both the papermakers and ink producers, as they wish to achieve better quality in the final product. The objective of this work is to clarify the combined influence of paper coating structure, printing ink and fountain solution on ink setting and the problems related to ink setting. A further aim is to identify the mechanisms that influence ink setting problems, and to be able to counteract them by changing properties of the coating layer or by changing the properties of the ink. The work carried out for this thesis included use of many techniques ranging from standard paper and printability tests to advanced optical techniques for detection of ink filaments during ink levelling. Modern imaging methods were applied for assessment of ink filament remain sizes and distribution of ink components inside pigment coating layers. Gravimetric filtration method and assessment of print rub using Ink-Surface-Interaction-Tester (ISIT) were utilized to study the influence of ink properties on ink setting. The chemical interactions were observed with the help of modified thin layer chromatography and contact angle measurements using both conventional and high speed imaging. The results of the papers in this thesis link the press operational parameters to filament sizes and show the influence of these parameters to filament size distribution. The relative importance between the press operation parameters was shown to vary. The size distribution of filaments is important in predicting the ink setting behaviour, which was highlighted by the dynamic gloss and ink setting studies. Prediction of ink setting behaviour was also further improved by use of separate permeability factors for different ink types in connection to filtration equations. The roles of ink components were studied in connection to ink absorption and mechanism of print rub. Total solids content and ratio of linseed oil to mineral oil were found to determine the degree of print rub on coated papers. Wax addition improved print rub resistance, but would not decrease print rub as much as lowering the total solids content in the ink. Linseed oil was shown to absorb into pigment coating pores by mechanism of adsorption to pore walls, which highlights the need for sufficient pore surface area for improved chromatographic separation of ink components. These results should help press operators, suppliers of printing presses, papermakers and suppliers to papermakers, to better understand the material and operating conditions of the press as it relates to various print quality issues. Even though paper is in competition with electronic media, high quality printed products are still in demand. The results should provide useful information for this segment of the industry.