Tipo de bebidas consumidas por los estudiantes universitarios

Fundamentos: Existe una gran diferencia entre el consumo de agua y las bebidas que contiene agua (bebidas carbonatadas, azucaradas, zumos o bebidas alcohólicas). El consumo de estas bebidas está relacionado con el desarrollo de enfermedades crónicas (obesidad, diabetes tipo 2, hipertensión arterial o dislipemias). El objetivo es determinar la frecuencia de consumo de bebidas de los estudiantes de la Universidad de Alicante. Métodos: Estudio transversal descriptivo. Población 26.273 estudiantes. Se seleccionaron 396 mediante muestreo aleatorio simple. Se utilizó un cuestionario frecuencia consumo para estimar la ingesta individual. Variables: bebidas (n=12) y frecuencia de consumo (n=4). Resultados: El 29,6% de hombres y el 13,0% de mujeres consumen bebidas carbonatadas con azúcar a diario (p-valor<0,001). El consumo diario de vino es nulo. El 41,4% de la población consume cerveza y destilados semanalmente. El 76,1% de hombres y el 58,7% de mujeres, consumen alcohol como mínimo una vez a la semana, p-valor=0,001. Conclusiones: Los resultados plantean la necesidad de estudios epidemiológicos que orienten el desarrollo de políticas nutricionales dirigidas a reducir el consumo de bebidas azucaradas y alcohólicas entre la población joven. Mediante un trabajo conjunto entre las autoridades gubernamentales, medios de comunicación, industria alimentaria y la sociedad en general.

Optimisation of analytical methods for the characterisation of oranges, clementines and citrus hybrids cultivated in Spain on the basis of their composition in ascorbic acid, citric acid and major sugars

Three HPLC methods were optimised for the determination of citric acid, succinic acid and ascorbic acid using a photodiode array detector and fructose, glucose and sucrose using a refractive index in twenty eight citrus juices. The analysis was completed in <16 min. Two different harvests were taken into account for this study. For the season 2011, ascorbic acid content was comprised between 19.4 and 59 mg vitamin C/100 mL; meanwhile for the season 2012, the content was slightly higher for most of the samples ranging from 33.5 to 85.3 mg vitamin C/100 mL. Moreover, the citric acid content in orange juices ranged between 9.7 and 15.1 g L−1, while for clementines the content was clearly lower (i.e. from 3.5 to 8.4 g L−1). However, clementines showed the highest sucrose content with values near to 6 g/100 mL. Finally, a cluster analysis was applied to establish a classification of the citrus species.

A promoção dos bons hábitos alimentares nos alunos do 1.º e do 2.º ciclo do ensino básico

Relatório de estágio apresentado para a obtenção do grau de mestre em Ensino do 1º e do 2º ciclo do ensino básico

Cozinha a baixa temperatura:

A dissertação “Cozinha a Baixa Temperatura: Aplicação ao caso da Confeção de Carne de Novilho” inicia-se pelo enquadramento histórico e respetiva conceptualização. São enumerados e explicados os intervenientes e procedimentos na Cozinha a Baixa Temperatura-Cozinha em Vácuo. Enquanto estudo, a cozinha a baixa temperatura foi alvo de críticas positivas no que confere aos benefícios nutricionais, à maximização das potencialidades do produto (conservação, textura, sabor, entre outros…), ao incremento das vantagens organizacionais e económicas (gestão de cozinhas/restaurantes); alertando para o fato de que um incorreto embalamento comprometerá as vantagens da técnica em estudo, ou seja são enumerados ainda todos os requisitos necessários a uma correta e eficaz cozinha em vácuo. Os diferentes tipos de cozinha a vácuo são igualmente abordados (indireta e dupla cozedura), bem como a influência da relação existente entre o tempo e a temperatura e as consequentes modificações químicas e fisiológicas. No intuito de introduzir uma vertente prática e enquanto projeto pessoal e profissional foi desenvolvida uma máquina para cozinhar a baixa temperatura (roner). Neste âmbito foram enumerados os materiais utilizados e explicado o seu funcionamento. Porque conceber um roner implica testá-lo, foi então decidido utilizar carne de vitela (capitação 100gr) durante 1 hora com temperaturas entre os 54 ºC e os 70 ºC. Foram realizados testes de textura em todas as amostras de carne recorrendo ao texturómetro TA XT Plus e respetivo software para o tratamento dos resultados. Em suma, analisando os resultados obtidos, a relação tempo e temperatura origina modificações químicas e fisiológicas na carne, ou seja uma carne a 54 ºC aporta uma menor gelatinização do colagénio originando uma carne menos macia, de tom rosa avermelhado, onde se dá uma menor contração das fibras musculares e que consequentemente origina uma menor quantidade de sucos expelidos da carne; já o contrário acontece numa confeção a 60 ºC, em que se verifica um tom rosa uniforme onde acontece uma maior contração das fibras musculares originando uma maior quantidade de sucos expelidos pela carne. Os resultados dos ensaios instrumentais de textura mostraram que a carne confecionada a 60 ºC se apresentou menos firme e menos dura, e portanto mais macia.

Avaliação do potencial erosivo de três bebidas de consumo nacional, no esmalte humano: estudo in vitro

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Projeto de Investimento

Angola encontra-se em processo de restruturação e de desenvolvimento a nível económico e financeiro. A opção pelo investimento em Angola surgiu com as oportunidades de negócio que o país apresenta e também pela necessidade de descentralização do setor da restauração. Após efetuar uma pequena análise do mercado angolano, foi elaborado o projeto “Sweet Art” que está associado ao mercado da indústria alimentar e o mesmo orienta as respetivas propostas de valor para o conjunto de indivíduos e famílias que compram bens e serviços para o consumo próprio. O objetivo principal desse trabalho consiste na elaboração de um plano de negócios viável para a abertura de uma pastelaria em Angola, na província de Luanda - bairro do Talatona, com oferta de doces, salgados, gelados de frutos naturais e secos e também sumos e batidos naturais. Por sua vez, os seus objetivos específicos compreendem a: descrição da ideia; a composição de um plano estratégico, para um melhor estudo do meio envolvente; constituição de um plano operacional de marketing (marketing mix); o plano de operações; plano de pessoal; e um plano financeiro para analisar a sua viabilidade económica e financeira. Na primeira etapa do trabalho foi abordada a componente conceptual e, em seguida, foi apresentado o plano de negócios em si, que terá uma duração estimada de cinco anos, sendo que no terceiro ano se verifica o retorno do investimento. Após elaborado o plano de negócios foi possível concluir que o empreendimento Sweet Art é viável económica e financeiramente.

Consumers' taste reactions to three experimental blends of orange and grapefruit juice.

Mode of access: Internet.

Discrimination tests and preliminary preference ratings of frozen concentrates for lemonade.

Mode of access: Internet.

The influence of coating materials on some properties of alginate beads and survivability of microencapsulated probiotic bacteria

The probiotics, Lactobacillus acidophilus 547, Bifidobacterium bifidum ATCC 1994, and Lactobacillus casei 01, were encapsulated into uncoated calcium alginate beads and the same beads were coated with three types of material, chitosan, sodium alginate, and poly-L-lysine in combination with alginate. The thickness of the alginate beads increased with the addition of coating materials. No differences were detectable in the bead strength by texture analysis or in the thickness of the beads with different types of coating materials by transmission electron microscopy. The survivability of three probiotics in uncoated beads, coated beads, and as free cells (unencapsulated) was conducted in 0.6% bile salt solution and simulated gastric juice (pH 1.55) followed by incubation in simulated intestinal juice with and without 0.6% bile salt. Chitosan-coated alginate beads provided the best protection for L. acidophilus and L. casei in all treatments. However, B. bifidum did not survive the acidic conditions of gastric juice even when encapsulated in coated heads. (C) 2004 Elsevier Ltd. All rights reserved.

Effect of addition of maltodextrin on drying kinetics and stickiness of sugar and acid-rich foods during convective drying: experiments and modelling

The effect of addition of maltodextrin on drying kinetics of drops containing fructose, glucose, sucrose and citric acid individually and in mixtures was studied experimentally using single drop drying experiments and numerically by solving appropriate mass and heat transfer equations. The numerical predictions agreed with the experimental moisture and temperature histories within 5-6% average relative (absolute) errors and average differences of +/- 1degreesC, respectively. The stickiness of these drops was determined using the glass transition temperature (T-g) of the drops' surface layer as an indicator. The experimental stickiness histories followed the model predictions with reasonable accuracy. A safe drying (non-sticky) regime in a spray drying environment has been proposed, and used to estimate the optimum amount of addition of maltodextrin for successful spray drying of 120 micron diameter droplets of fruit juices. (C) 2003 Elsevier Ltd. All rights reserved.

Erosive effects of common beverages on extracted premolar teeth

Background: Dental erosion is highly prevalent today, and acidic drinks are thought to be an important cause. The aim of the present investigation was to determine the erosive potential of a range of common beverages on extracted human teeth. Methods: The beverages were tested for their individual pHs using a pH meter. The clinical effects of the most erosive beverages were determined by the degree of etching and Vickers microhardness of enamel. Results: The results showed that many common beverages have pHs sufficiently low to cause enamel erosion. Lime juice concentrate (pH 2.1) had the lowest pH, followed by Coca-cola and Pepsi (both with pH 2.3) and Lucozade (pH 2.5). The erosive potential of these beverages was demonstrated by the deep etching of the enamel after five minutes. The Vickers Hardness of enamel was reduced by about 50 per cent is the case of lime juice (p < 0.001) and 24 per cent in the case of Coca-cola (p < 0.004). Addition of saliva to 50 per cent (v/v) of Coca-cola completely reversed the erosive effects on the enamel. Conclusion: Although only a few of the beverages with the lowest pHs were tested, the present study showed that the most acidic drinks had the greatest erosive effects on enamel. While saliva was protective against erosion, relatively large volumes were required to neutralize the acidity.

Measurement of glass-rubber transition temperature of skim milk powder by static mechanical test

Stickiness behavior of skim milk powder was investigated based on the mechanical property of the material during the glass-rubber transition. A thermally controlled device was developed for the static mechanical test. This device was attached to a texture analyzer, and skim milk powder, which was used as a model sample, was tested for its glass-rubber transition temperature (Tg-r) using static compression technique (creep test). Changes in compression probe distance as a function of temperature were recorded. Tg-r was determined, in the region where changes in the probe distance were observed, by using linear regression technique. The effect of sample quantity, compression force, and heating rate on the determination of Tg-r was investigated. All these parameters significantly influenced the Tg-r determination (p < 0.05). The Tg-r of skim milk powder measured by this novel technique was found closely correlated to its glass transition temperature (T-g) measured by DSC.

Optimization of co-current spray drying process of sugar-rich foods. Part I - Moisture and glass transition temperature profile during drying

A steady state mathematical model for co-current spray drying was developed for sugar-rich foods with the application of the glass transition temperature concept. Maltodextrin-sucrose solution was used as a sugar-rich food model. The model included mass, heat and momentum balances for a single droplet drying as well as temperature and humidity profile of the drying medium. A log-normal volume distribution of the droplets was generated at the exit of the rotary atomizer. This generation created a certain number of bins to form a system of non-linear first-order differential equations as a function of the axial distance of the drying chamber. The model was used to calculate the changes of droplet diameter, density, temperature, moisture content and velocity in association with the change of air properties along the axial distance. The difference between the outlet air temperature and the glass transition temperature of the final products (AT) was considered as an indicator of stickiness of the particles in spray drying process. The calculated and experimental AT values were close, indicating successful validation of the model. (c) 2004 Elsevier Ltd. All rights reserved.

Modeling dimensional shrinkage of shaped foods in fluidized bed drying

Three particular geometrical shapes of parallelepiped, cylinder and sphere were selected from cut beans (length : diameter = 1: 1, 2:1, 3: 1), potatoes (aspect ratio = 1:1, 2:1, 3:1) and peas, respectively. The dimensional shrinkage behavior was studied in a batch fluidized bed at three drying temperatures of 30, 40 and 50C. Relative humidity of hot air was kept at 15%. Dimensional shrinkage was plotted using a nondimensional moisture ratio and the shrinkage behavior of the selected foods was modeled with simple mathematical models.

Relating the stickiness property of foods undergoing drying and dried products to their surface energetics

Stickiness is a common problem encountered in food handling and processing, and also during consumption. Stickiness is observed as adhesion of the food to processing equipment surfaces or cohesion within the food particulate or mass. An important operation where this undesirable behavior of food is manifested is drying. This occurs particularly during drying of high-sugar and high-fat foods. To date, the stickiness of foods during drying or dried powder has been investigated in relation to their viscous and glass transition properties. The importance of contact surface energy of the equipment has been ignored in many analyses, despite the fact that some drying operations have reported using low-energy contact surfaces in drying equipment to avoid the problems caused by stickiness. This review discusses the fundamentals of adhesion and cohesion mechanisms and relates these phenomena to drying and dried products.