Avaliação do perfil de risco de cárie dentária em gestantes de Araraquara, Brasil

The knowledge of risk of carried during pregnant is essential for an appropriate treatment using educational and preventives actions to mother for a good care of their oral health and that of children. The main objective of present retrospective study was to identify the risk of caries of pregnants (aged 15-44, mean= 25 years) came to clinic of Preventive Odontology of Araraquara-UNSEP from 1999 to 2007, using 166 medical records obtained by the third pregraduate year students, following the pre-established guidelines. The information collected includes: classification of caries risk diagnosis, pregnancy trimester, carbohydrates ingestion (between or during foods), dental plaques (O'Leary's plaque control registry) and the number of teeth with caries. The statistical analysis used the Chi2 and ANOVA tests. Most of patients showed a 25 % or more of teeth surfaces with dental plaques (92.1 %) and carbohydrates consumption among foods (89.2 %). The mean (SD) of carried and restores teeth was of 7.9 (5.1) and 4.0 (3.4), respectively and the posterior teeth were the more involved by caries/restorations. As regards the diagnosis of caries risk, classification of high risk was observed in the 38.5 % of pregnants, moderate in the 47.6 %) and low in the 13.9 %. There was a statistically significant association (p= 0.001) between the carbohydrates consumption and the diagnosis of caries risk. The plaque's rate was similar in the different trimesters of pregnancy (f= 0.223; p= 0.803). The caries risk of most pregnant women was high or moderate and it was associated with the consumption of carbohydrates.

Metodologia para avaliação da deposição em pulverizações

O trabalho teve como objetivo o desenvolvimento de uma metodologia de avaliacao qualitativa e quantitativa, com o uso de substancia tracadoras, nos estudos de deposicao em pulverizacao, com a possibilidade de variacao da tensao superficial da calda. Plantas de citros foram pulverizadas com solucao tracadora composta pelo corante Azul Brilhante na concentracao de 0,15% em mistura com o Saturn Yellow tambem a 0,15%, suspenso com o lignosulfonato Vixilperse a 0,015%. A pulverizacao foi realizada com turboatomizador Jacto, na velocidade de deslocamento de 2,8 km/h e volume de calda de 1830 L/ha. A tensao superficial da solucaotracadora pulverizada foi ajustada para 72,6 mN/m, mesma da agua, e com a reducao para 36,5 mN/m. Para as avaliacoes dos depositos, dividiu-se a planta em 12 setores, partes baixa, media e alta, coletando-se amostras nas partes externa e interna e nas posicoes frontal e perpendicular a pulverizacao. Em cada posicao de coleta na planta foram retiradas duas amostras de folhas, uma constituida de 10 folhas para avaliar a distribuicao e o deposito total de ambas as superficies das folhas, e outra com 6 folhas para avaliar a relacao do deposito individual entre as superficies inferior (abaxial) e superior (adaxial) das folhas. O escorrimento de calda para o solo foi avaliado colocando-se placas de petri, distanciadas de 20 cm entre si e linearmente, sob a projecao da copa, nos setores frontal e perpendicular a pulverizacao. Para cada tensao superficial testada coletou-se amostras em 5 plantas, considerando-se cada planta uma repeticao. A avaliacao qualitativa foi feita atraves da visualizacao da distribuicao do deposito sob luz ultravioleta e a determinacao da quantidade depositada atraves da espectrofotometria. A metodologia desenvolvida mostrou-se adequada para avaliacao dos depositos de pulverizacoes no campo, com a solucao tracadora, pela possibilidade de avaliar qualitativa e quantitativa

Classificação de cônicas e quádricas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento e aplicação de microplumas para tratamento de politereftalato de etileno (PET)

Pós-graduação em Engenharia Mecânica - FEG

Avaliação da perda óssea alveolar em pacientes encaminhados à especialista em periodontia: estudo radiográfico

The aim of this study was to evaluate the mean of alveolar bone loss (%) in radiographies of patients referred to specialist for periodontal treatment. Full mouth series of periapical radiographies (paralelism technique) were used. A total of 9808 proximal surfaces in 4804 teeth of 213 patients (90 males and 123 females), mean age, 44.3 years, were assessed. The alveolar bone loss was measured in relation to root lenght expressed as an average similar to Schei 's technique (1959) without the use of ruler. The references used were the distances cement-enamel juntion (CEJ) - alveolar crest (AC) and CEJ- dental apex taken with a digimatic caliper. The results showed that the mean values of alveolar bone loss (%ABL) was 22.39%. Men showed higher mean values of %ABL than women; the %ABL increased with the age, but the difference among age groups was no statistical significant (p>0.05); the mean values of %ABL of distal surfaces was higher than mesial surfaces (p<0.01), ríght quadrants exhibited higher %ABL values than left quadrants (p<0.01); maxillary sites showed mean values of %ABL higher than mandibular sites; the highest mean values of %ABL was found in molar group, followed by incisor groups, and premolar group; the canine group exhibited lower mean values of %ABL; the differences among the groups was considered statitistically significant (p<0.01). lt was suggested the usage of this technique in the dentistry offices and radiological services for the patient 's documentation and assortment and for later comparison about alveolar bone level

Wettability behavior of nanotubular TiO2 intended for biomedical applications

Nanotubes have been subject of studies with regard to their ability to promote differentiation of several cells lines. Nanotubes have been used to increase the roughness of the implant surfaces and to improve bone tissue integration on dental implant. In this study TiO2 nanotube layer prepared by anodic oxidation was evaluated. Nanotube formation was carried out using Glycerol-H2O DI(50-50 v/v)+NH4F(0,5 a 1,5% and 10-30V) for 1-3 hours at 37ºC. After nanostructure formation the topography of surface was observed using field-emission-scanning-microscope (FE-SEM). Contact angle was evaluated on the anodized and non-anodized surfaces using a water contact angle goniometer in sessile drop mode with 5 μL drops. In the case of nanotube formation and no treatment surface were presented 39,1° and 75,9°, respectively. The contact angle describing the wettability of the surface is enhanced, more hydrophilic, on the nanotube surfaces, which can be advantageous for enhancing protein adsorption and cell adhesion.

Biossegurança na clínica de radiologia odontológica

In the practice of dental radiology, although there was no production of aerosols, there is the contamination of equipment and surfaces by contact with blood and saliva. This is making necessary the adoption infection control procedures to protect patients and staff. The objective of this paper is to present the procedures of prevention during the radiographic examination and radiographic processing in the darkroom. The proposed recommendations for the area of Dental Radiology include efficient cleaning and protection of equipment and surfaces, personal protective measures and to avoid contamination of the darkroom. These recommendations are obtained by simple procedures as cover films and radiological equipment with plastic barriers.

Superfícies projetadas: uma simbiose dos processos criativo e executivo

This study aims to recognize the Surface Design as specialty hybrid and clarify the relationship between surface and design through projetual creative act and technical. The study shows that there projetual hybridity in the design of the Surface Design and the same occurs in two distinct stages: the creative phase , where the inherent design specialties together for their training , and executive process in which the diversity of technical information and construction procedures to assist the integration of design with other productive areas . Identify the products presented its projected surface condition , based on concepts checked the state of the art Surface Design was an action that enabled the verification of functional, aesthetic and symbolic object concepts . To evaluate this condition are presented six case studies to verify the levels of cooperation and implementation of the specialties of Design in objects that are highlighted by presenting different surfaces. Among the products are: DKR chair, bench Pai João, bench R540, Híbridos table, Facetas table and bench Xique-xique.

Evaluación higiénico sanitaria en queserías industriales y artesanales de Canarias

[ES] El objetivo general de realizar una evaluación higiénico-sanitaria en queserías industriales y artesanales de Canarias, se consideró de gran interés realizar un estudio de los principales establecimientos lácteos en los que a través de diversas encuestas (APPCC, LD, producción, HAS, test de manipuladores) y mediante la aplicación de controles microbiológicos (de superficies y productos), se permitiera valorar a través de la identificación de los principales riesgos y/o peligros, la calidad higio-sanitaria de estos productos.

Ecology of marine bacteroidetes: a genomics approach

Institut de Ciències del Mar (ICM-CSIC). Doctorado en oceanografía. Con mención de Calidad de la ANECA

Las terrazas del rio Miño en el tramo Chantada-As Neves (límite de Galicia Portugal)

[ES] La cartografía geomorfológica es especialmente difícil en áreas con depósitos escasos, poco significativos y de cronología incierta,con formas multiedad y multiorigen. Tal es el caso de Galicia. Este trabajo es un intento de reconstruir la historia geomorfológica de Galicia durante el Cenozoico en un área especialmente relevante por su situación geodinámica. Se ha hecho un inventario exhaustivo de los niveles de terrazas erosivas y de acumulación en un tramo específico, por sus características morfológicas del curso principal del río Miño. Se presentan aquí los sistemas de terrazas entre Chantada y As Neves y se relacionan con las tres superficies de corrosión química (etched surfaces) más relevantes en la zona: R800, R600 y R400. Se analiza también su relación con el perfil longitudinal del río. Utilizando los únicos criterios existentes (continuidad topográfica y altitud), se propone para el sector estudiado un modelo evolutivo esencialmente determinado por la incisión fluvial asociada a la colisión entre la Placa Euroasiática y la Ibérica durante el Paleógeno y que geomorfológicamente se inicia a partir de la formación del aplanamiento R600, equivalente en Galicia a la Superficie Fundamental Peninsular.

Las terrazas del río Sil en el tramo Carucedo-Os Peares, SE de Galicia

[ES] Se describen los sistemas de terrazas del Río Sil desde el Bierzo hasta la confluencia con el Miño. En este tramo el río se encaja profundamente sobre las principales superficies de erosión del SE gallego (R400, R600, R800, RlOOO y R1200). Junto a los niveles de terraza con depósitos se observa la presencia de superficies terraza y aplanamientos de mayor extensión, siempre asociados al encajamiento fluvial. Se analiza la morfometría y los perfiles longitudinales de la red; así como la distribución de las terrazas y aplanamientos incluidos en el encajamiento. Se reconocen algunos cambios en la evolución de la red simultáneos a la sedimentación de las fosas terciarias (Monforte de Lemos, Quiroga, A Rúa-O Barco). La antigüedad de la red y un descenso generalizado en el nivel de base del Sistema Miño-Sil, podría justificar estos acontecimientos. Sin embargo, existen indicios de cierto control tectónico. Por último se propone un modelo evolutivo del tramo estudiado, para la etapa posterior a la formación del aplanamiento RlOOO.

Análisis del coste económico del uso de la superficie de césped sintético por futbolista en campos de fútbol públicos. Estudio de casos

[ES]El presente artículo ahonda en el análisis de la realidad acerca de los costes de reponer y utilizar superficies deportivas de césped artificial, centrando sus indagaciones en el caso del fútbol, deporte mayoritario en cuanto a participación en España. La metodología empleada en el análisis se basa en un estudio de casos, buscando esclarecer principalmente, el coste de un único uso por jugador y por equipo en un campo de fútbol de césped artificial. En el estudio que nos ocupa, hemos basado la investigación en dos espacios deportivos completamente opuestos en cuanto a su ocupación, al objeto de conocer el importe económico a satisfacer por cada usuario o equipo. El estudio posee unos objetivos muy concretos que se centran en procesar el análisis y conseguir datos reveladores de la realidad de las superficies sintéticas de fútbol, así como determinar y validar unos indicadores que son la base del estudio.

Uso de métodos ensemble para la predicción de la radiación solar

[EN]Se propone un modelo de radiación solar adaptativo como una nueva herramienta para la generación de mapas de radiación solar. Este introduce mejoras a los modelos existentes como la adaptación de la malla a la orografía y al albedo. Esta estrategia adaptativa nos permite generar un código eficiente que reduce el coste computacional para una precisión dada. La radiación global es obtenida como suma de sus tres componentes, la directa, la difusa y la reflejada, sobre una región de estudio bajo condiciones de cielo limpio. En este sentido, las superficies inclinadas tendrán un tratamiento diferente de las horizontales y se tendrá en cuenta el efecto de las zonas en sombra…

Multiscale variability in the North Atlantic Ocean

Programa de doctorado, Oceanografía ; 2004-2006