4-Organochalcogenoyl-1H-1,2,3-triazoles: synthesis and functionalization by a nickel-catalyzed Negishi cross-coupling reaction

A general method for the synthesis of triazoles containing selenium and tellurium was accomplished via a CuCAAC reaction between organic azides and a terminal triple bond, generated by in situ deprotection of the silyl group. The reaction tolerates alkyl and arylazides, with alkyl and aryl substituents directly bonded to the chalcogen atom. The products were readily functionalized by a nickel-catalyzed Negishi cross-coupling reaction, furnishing the aryl-heteroaryl products at the 4-position in good yields. (C) 2012 Elsevier Ltd. All rights reserved.

Coupling Between GABA(A)-R Ligand-Binding Activity and Membrane Organization in beta-Cyclodextrin-Treated Synaptosomal Membranes from Bovine Brain Cortex: New Insights from EPR Experiments

Correlations between GABA(A) receptor (GABA(A)-R) activity and molecular organization of synaptosomal membranes (SM) were studied along the protocol for cholesterol (Cho) extraction with beta-cyclodextrin (beta-CD). The mere pre-incubation (PI) at 37A degrees C accompanying the beta-CD treatment was an underlying source of perturbations increasing [H-3]-FNZ maximal binding (70%) and K (d) (38%), plus a stiffening of SMs' hydrocarbon core region. The latter was inferred from an increased compressibility modulus (K) of SM-derived Langmuir films, a blue-shifted DPH fluorescence emission spectrum and the hysteresis in DPH fluorescence anisotropy (A (DPH)) in SMs submitted to a heating-cooling cycle (4-37-4A degrees C) with A (DPH,heating) < A (DPH,cooling). Compared with PI samples, the beta-CD treatment reduced B (max) by 5% which correlated with a 45%-decrement in the relative Cho content of SM, a decrease in K and in the order parameter in the EPR spectrum of a lipid spin probe labeled at C5 (5-SASL), and significantly increased A (TMA-DPH). PI, but not beta-CD treatment, could affect the binding affinity. EPR spectra of 5-SASL complexes with beta-CD-, SM-partitioned, and free in solution showed that, contrary to what is usually assumed, beta-CD is not completely eliminated from the system through centrifugation washings. It was concluded that beta-CD treatment involves effects of at least three different types of events affecting membrane organization: (a) effect of PI on membrane annealing, (b) effect of residual beta-CD on SM organization, and (c) Cho depletion. Consequently, molecular stiffness increases within the membrane core and decreases near the polar head groups, leading to a net increase in GABA(A)-R density, relative to untreated samples.

Efficient plasmonic coupling between Er3+:(Ag/Au) in tellurite glasses

We report a systematic study of the localized surface plasmon resonance effects on the photoluminescence of Er3+-doped tellurite glasses containing Silver or Gold nanoparticles. The Silver and Gold nanoparticles are obtained by means of reduction of Ag ions (Ag+ -> Ag-0) or Au ions (Au3+ -> Au-0) during the melting process followed by the formation of nanoparticles by heat treatment of the glasses. Absorption and photoluminescence spectra reveal particular features of the interaction between the metallic nanoparticles and Er3+ ions. The photoluminescence enhancement observed is due to dipole coupling of Silver nanoparticles with the I-4(13/2) -> I-4(15/2) Er3+ transition and Gold nanoparticles with the H-2(11/2)-> I-4(13/2) (805 nm) and S-4(3/2) -> I-4(13/2) (840 nm) Er3+ transitions. Such process is achieved via an efficient coupling yielding an energy transfer from the nanoparticles to the Er3+ ions, which is confirmed from the theoretical spectra calculated through the decay rate. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

Computation of (3)J(HH) coupling constants with a combination of density functional theory and semiempirical calculations. Application to complex molecules

This work evaluates the efficiency of economic levels of theory for the prediction of (3)J(HH) spin-spin coupling constants, to be used when robust electronic structure methods are prohibitive. To that purpose, DFT methods like mPW1PW91. B3LYP and PBEPBE were used to obtain coupling constants for a test set whose coupling constants are well known. Satisfactory results were obtained in most of cases, with the mPW1PW91/6-31G(d,p)//B3LYP/6-31G(d,p) leading the set. In a second step. B3LYP was replaced by the semiempirical methods PM6 and RM1 in the geometry optimizations. Coupling constants calculated with these latter structures were at least as good as the ones obtained by pure DFT methods. This is a promising result, because some of the main objectives of computational chemistry - low computational cost and time, allied to high performance and precision - were attained together. (C) 2012 Elsevier B.V. All rights reserved.

Running coupling and pomeron loop effects on inclusive and diffractive DIS cross sections

Within the framework of a (1 + 1)-dimensional model which mimics high-energy QCD, we study the behavior of the cross sections for inclusive and diffractive deep inelastic gamma*h scattering cross sections. We analyze the cases of both fixed and running coupling within the mean-field approximation, in which the evolution of the scattering amplitude is described by the Balitsky-Kovchegov equation, and also through the pomeron loop equations, which include in the evolution the gluon number fluctuations. In the diffractive case, similarly to the inclusive one, suppression of the diffusive scaling, as a consequence of the inclusion of the running of the coupling, is observed.

Novel cross-coupling reactions between organotellurides and Grignard reagents employing a MnCl2/CuI catalytic system

We present a general protocol for the cross-coupling reaction of Grignard reagents and organic tellurides. Aryl Grignard reagents react stereospecifically with vinyl tellurides in the presence of a catalytic amount of manganese (II) chloride and copper (I) iodide to produce good yields of the corresponding cross-coupling products. (C) 2012 Published by Elsevier Ltd.

Detailed H-1 and C-13 NMR structural assignment and relative stereochemistry determination for three new and one known semi-synthetic sesquiterpene lactones

In this work is described a complete H-1 and C-13 NMR analysis for a group of four sesquiterpene lactones, three previously unknown. The unequivocal assignments were achieved by H-1 NMR, C-13{H-1} NMR, gCOSY. gHMQC, gHMBC and NOESY experiments and no ambiguities were left behind. All hydrogen coupling constants were measured, clarifying all hydrogen signals multiplicities. (C) 2011 Elsevier B.V. All rights reserved.

QCD sum rules for the 'Z POT + IND C' (3900) state.

We use the QCD sum rules to study the recently observed charmonium-like structure Z+ c (3900) as a tetraquark state. We evaluate the three-point function and extract the coupling constants of the Z+ c J/ψ π+, Z+ c ηc ρ+ and Z+ c D+ ¯D∗0 vertices and the corresponding decay widths in these channels. The results obtained are in good agreement with the experimental data and supports to the tetraquark picture of this state.

Studies on Transformations of H-Phosphonates into DNA Analogues Containing P-S or P-C Bonds

In this thesis, mechanistic and synthetic studies on transformations of H-phosphonates into DNA analogues containing P-S or P-C bonds are described. Configurational stability of dinucleoside H-phosphonates and the stereochemical course of their sulfurisation in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) were investigated. In light of these studies, the reported stereoselective sulfurisation of dinucleoside H-phosphonates and benzoylphosphonates in the presence of DBU was proved to be incorrect. Efficient protocols for the synthesis of new nucleotide analogues with non-ionic C-phosphonate internucleotide linkages were developed. The synthesis of dinucleoside 2-pyridylphosphonates was successfully performed by a DBU-promoted reaction of H-phosphonate diesters with N-methoxypyridinium salts. The thio analogues, 2-pyridyl- and 4-pyridyl phosphonothioate diesters, could be obtained by modifying the reactions developed for their oxo counterparts. Dinucleoside 3-pyridylphosphonates were prepared via a palladium(0)-catalysed cross coupling strategy that could be extended also to the synthesis of nucleotide analogues with metal-complexing properties, i.e. terpyridyl- and bipyridylphosphonate derivatives. Oligonucleotides modified with pyridylphosphonate internucleotide linkages have been prepared and preliminary studies on their hybridisation properties and resistance towards enzymatic degradation were performed. Finally, nucleotidic units for the incorporation of pyridylphosphonate groups at the 5’-terminus of oligonucleotides were designed. Condensations of such units with a suitably protected nucleoside afforded after oxidation the expected dinucleoside (3’-5’)-phosphates with pyridylphosphonate monoester functions at the 5’-ends.

Optimised polyolefin branch quantification by 13 C NMR spectroscopy

Quantitative branch determination in polyolefins by solid- and melt-state 13C NMR has been investigated. Both methods were optimised toward sensitivity per unit time. While solid-state NMR was shown to give quick albeit only qualitative results, melt-state NMR allowed highly time efficient accurate branch quantification. Comparison of spectra obtained using spectrometers operating at 300, 500 and 700 MHz 1H Larmor frequency, with 4 and 7~mm MAS probeheads, showed that the best sensitivity was achieved at 500 MHz using a 7 mm 13C-1H optimised high temperature probehead. For materials available in large quantities, static melt-state NMR, using large diameter detection coils and high coil filling at 300 MHz, was shown to produce comparable results to melt-state MAS measurements in less time. While the use of J-coupling mediated polarisation transfer techniques was shown to be possible, direct polarisation via single-pulse excitation proved to be more suitable for branch quantification in the melt-state. Artificial line broadening, introduced by FID truncation, was able to be reduced by the use of π pulse-train heteronuclear dipolar decoupling. This decoupling method, when combined with an extended duty-cycle, allowed for significant improvement in resolution. Standard setup, processing and analysis techniques were developed to minimise systematic errors contributing to the measured branch contents. The final optimised melt-state MAS NMR method was shown to allow time efficient quantification of comonomer content and distribution in both polyethylene- and polypropylene-co-α-olefins. The sensitivity of the technique was demonstrated by quantifying branch concentrations of 8 branches per 100,000 CH2 for an industrial ‘linear’ polyethylene in only 13 hours. Even lower degrees of 3–8 long-chain branches per 100,000 carbons were able to be estimated in just 24 hours for a series of γ-irradiated polypropylene homopolymers.

Mode-coupling theory: generalizations, high dimensions and microscopic dynamics

This work contains several applications of the mode-coupling theory (MCT) and is separated into three parts. In the first part we investigate the liquid-glass transition of hard spheres for dimensions d→∞ analytically and numerically up to d=800 in the framework of MCT. We find that the critical packing fraction ϕc(d) scales as d²2^(-d), which is larger than the Kauzmann packing fraction ϕK(d) found by a small-cage expansion by Parisi and Zamponi [J. Stat. Mech.: Theory Exp. 2006, P03017 (2006)]. The scaling of the critical packing fraction is different from the relation ϕc(d)∼d2^(-d) found earlier by Kirkpatrick and Wolynes [Phys. Rev. A 35, 3072 (1987)]. This is due to the fact that the k dependence of the critical collective and self nonergodicity parameters fc(k;d) and fcs(k;d) was assumed to be Gaussian in the previous theories. We show that in MCT this is not the case. Instead fc(k;d) and fcs(k;d), which become identical in the limit d→∞, converge to a non-Gaussian master function on the scale k∼d^(3/2). We find that the numerically determined value for the exponent parameter λ and therefore also the critical exponents a and b depend on the dimension d, even at the largest evaluated dimension d=800. In the second part we compare the results of a molecular-dynamics simulation of liquid Lennard-Jones argon far away from the glass transition [D. Levesque, L. Verlet, and J. Kurkijärvi, Phys. Rev. A 7, 1690 (1973)] with MCT. We show that the agreement between theory and computer simulation can be improved by taking binary collisions into account [L. Sjögren, Phys. Rev. A 22, 2866 (1980)]. We find that an empiric prefactor of the memory function of the original MCT equations leads to similar results. In the third part we derive the equations for a mode-coupling theory for the spherical components of the stress tensor. Unfortunately it turns out that they are too complex to be solved numerically.

Synthese von Sialyl-Lewis-X-Mimetika durch stereoselektive ortho-C-Glycosylierung von Phenolen

Ziel der Arbeit war es, Sialyl-LewisX-Mimetika auf Basis ortho-C-glycosylierter Phenole als Inhibitoren für die Selektin-Ligand-Wechselwirkungen zu synthetisieren. Dazu wurde zunächst die Stereoselektivität der ortho-C-Mannosylierung untersucht. Dabei wurde gezeigt, dass bei der Umsetzung von Phenolen mit dem benzylgeschützten Mannosyl-trichloracetimidat in Gegenwart von TMSOTf selektiv das β-C-Mannosid erhalten wurde. Gleichzeitig konnte anhand der NMR-spektroskopischen Untersuchungen nachgewiesen werden, dass die in der Literatur beschriebenen α-C-Mannoside von Phenolen tatsächlich β-konfiguriert sind. Wenn Naphthole als Glycosylakzeptoren verwendet wurden, konnten durch Modifikation des Promotors auch die für die Synthese der Mimetika benötigten α-C-Mannoside erhalten werden, wobei ZnCl2 als Promotor die besten Ergebnisse lieferte. Allerdings zeigten die synthetisierten α-C-Mannoside und α-C-Galactoside eine Inversion des Pyranoseringes und lagen in der ungewöhnlichen 1C4-Konformation vor.rnAnschließend konnte auf diese Weise das durch Docking-Studien gefundene Mimetikum (2S)-3-Cyclohexyl-2-[7-hydroxy-8-(α-D-mannosyl)naphthalin-2-yloxy]propionsäure syntheti-siert werden. Es besaß jedoch in Zelladhäsionstests keine ausreichende Aktivität bei der Inhibierung der Selektin-Ligand-Wechselwirkung. Bei den ursprünglichen Dockingstudien war allerdings von der gewohnten 4C1-Konformation ausgegangen worden. Spätere NMR-Experimente und DFT-Berechnungen zeigten, dass das Mimetikum tatsächlich in der 1C4-Konformation vorlag und es deshalb nicht aktiv war. Die synthetisierten Stereo- und Regioisomere zeigten in Zelladhäsionstests ebenfalls keine Aktivität.rnVersuche, die α-1-C-Mannosylnaphthole zu den benötigten 1-C-2-O-Diglycosyl-naphthalinen umzusetzen waren nicht erfolgreich, da die phenolische OH-Gruppe sterisch zu sehr abgeschirmt war, um unter milden Reaktionsbedingungen glycosyliert zu werden, bzw. die α-1-C-Mannosylnaphthaline unter drastischeren Reaktionsbedingungen nicht stabil waren. Daher wurde 1-(2′,3′,4′,6′-Tetra-O-benzyl-β-D-galactopyranosyl)-2-naphthol mit 2,3,4,6-Tetra-O-acetyl-α-D-mannopyranosyl-trichloracetimidat in Gegenwart von TMSOTf zum ersten synthetischen 1-C-2-O-Diglycosyl-phenol umgesetzt. Nach Abspaltung der Schutzgruppen sollte das erhaltene 1-Galactosyl-2-O-mannosyl-naphthalin enzymatisch zum Sialyl-LewisX-Mimetikum verlängert werden. Es wurde vom Enzym jedoch nicht als Substrat erkannt. Versuche zur chemischen Anbindung des Säurebausteins stehen noch aus.rn

Synthesen von C-glycosylierten Aminosäuren und Peptiden unter Einsatz speziell konstruierter Mikroreaktoren

Die chemische Synthese definierter Glycopeptidstrukturen bildet die Basis einiger vielversprechender Ansätze zur Therapie verschiedener Krankheiten. Die Entwicklung hochaffiner Selektininhibitoren könnte der Behandlung chronischer Entzündungen und zur Unterdrückung der Metastasierung von Tumoren dienen. Vollsynthetische Vakzine auf Basis glycosylierter MUC1-Partialstrukturen sollen das Immunsystem zur Bekämpfung von krankem Gewebe anregen und so perspektivisch eine Impfung gegen Krebs ermöglichen. Da die natürlich vorkommenden O-Glycoside in vivo eine begrenzte Stabilität besitzen, wurde eine Methode entwickelt, welche die modulare Herstellung von stabilen rnC-Glycosylaminosäuren als Mimetika der natürlichen Serin-, Threonin- und Tyrosin-Glycoside ermöglicht. Dazu wurden passend geschützte Kohlenhydrat-Lactone synthetisiert, die in einer mikrowellengestützten Petasis-Olefinierung unter Durchflussbedingungen in die entsprechenden exo-Glycale überführt wurden. Die Reaktionszeit konnte durch diese spezielle Reaktionsführung auf weniger als drei Minuten verringert werden, während konventionell mehrere Stunden benötigt werden. Die C-glycosidische Verknüpfung mit den entsprechenden Aminosäurebausteinen gelang durch eine Hydroborierungs-Suzuki-Kupplungs-Kaskade. Nach umfangreicher Optimierung der Reaktionsparameter ließ sich neben mehreren Monosacchariden auch ein exo-Glycal der Lactose erfolgreich in der Kupplung einsetzen. Nach verschiedenen Schutzgruppenmanipulationen wurden einige der synthetisierten Bausteine zur Synthese C-glycosylierter Partialstrukturen des Mucins MUC1 an der festen Phase herangezogen. In ELISA-Experimenten wurden die C-Glycosylpeptide von an Brustkrebsgewebe bindenden Antikörpern erkannt, die durch Vakzinierung mit ähnlichen Strukturen erhalten worden waren. Zur Synthese zweier Bausteine potenzieller Selektin-Inhibitoren wurde ein Mimetikum des in natürlichen Liganden vorkommenden Tetrasaccharides Sialyl-Lewisx synthetisiert. Bei diesem wurde die terminale Sialinsäure durch (S)-Cyclohexylmilchsäure ersetzt. Die bei der gewählten Syntheseroute notwendige regioselektive Öffnung eines Benzylidenacetals wurde in einem Mikroreaktor durchgeführt, wodurch eine einfache Reaktionsoptimierung mit geringen Substanzmengen möglich war. Die Reaktionszeit liegt mit unter 4 Minuten deutlich unter den üblichen Werten von einer bis mehreren Stunden. In einer Block-Glycosylierung konnte das Pseudotetrasaccharid sowohl an einen C-Lactosyl-Tyrosin-, als auch an einen C-Lactosyl-Serin-Akzeptor angefügt und somit die Synthese der Zielverbindungen abgeschlossen werden. Diese Bausteine können in Zukunft als Bestandteile synthetischer Glycopeptide zum Einsatz kommen, welche Mimetika der natürlichen Selektin-Liganden darstellen sollen.rn