Flow analysis-hydride generation-gas phase derivative molecular absorption spectrophotometric determination of antimony in antileishmanial drugs

In the present work, the development of a method based on the coupling of flow analysis (FA), hydride generation (HG), and derivative molecular absorption spectrophotometry (D-EAM) in gas phase (GP), is described in order to determine total antimony in antileishmanial products. Second derivative order (D²224nm) of the absorption spectrum (190 - 300 nm) is utilized as measurement criterion. Each one of the parameters involved in the development of the proposed method was examined and optimized. The utilization of the EAM in GP as detection system in a continuous mode instead of atomic absorption spectrometry represents the great potential of the analytic proposal.

Caldensinic acid, a benzoic acid derivative and others compounds from Piper carniconnectivum

A benzoic acid derivative - caldensinic acid; E-phytyl hexadecanoate; β-sitosterol and stigmasterol mixture and phaeophytin a were isolated from the aerial parts of Piper carniconnectivum. The structures of these compounds were established unambiguously by IR, MS, 1D and 2D NMR analysis.

UV derivative spectrophotometric method for determination of estradiol valerate in tablets

A derivative UV spectrophotometric method for determination of estradiol valerate in tablets was validated. The parameters specificity, linearity, precision, accuracy, limit of detection and limit of quantitation were studied according to validation guidelines. The first-order derivative spectra were obtained at N = 5, Δλ = 4.0 nm, and determinations were made at 270 nm. The method showed specificity and linearity in the concentration range of 0.20 to 0.40 mg mL-1. The intra and interday precision data demonstrated the method has good reproducibility. Accuracy was also evaluated and results were satisfactory. The proposed method was successfully applied to a pharmaceutical formulation.

Electrochemical study, on mercury, of a Meta-nitroarylamine derivative of nor-β-lapachone, an antitumor and trypanocidal compound

The electrochemistry of 2,2-dimethyl-(3H)-3-(N-3'-nitrophenylamino)naphtho[1,2- b]furan-4,5-dione ([Q]-PhNO2), on mercury was investigated. The first peak is consistent with a quasi-reversible one-electron reduction of the ortho-quinone, forming [Q•-]-PhNO2, while the second one, bielectronic, corresponds to the simultaneous reduction of the latter radical to a dianion and the nitro group to a nitro radical anion. The second order rate constant, k disp, for the decay of [Q•-]-PhNO2 is 15.188 x 10³ ± 827 mol"1 L s"1 and the t1/2 equals 0.06 s. E¹7Ic values for [Q]-PhNO2 and its precursor, nor-β-lapachone, are similar. The ease of semiquinone generation and its stability are parameters statistically relevant in the correlation biochemical/theoretical aspects.

Derivative spectrophotometric method for determination of acyclovir in polymeric nanoparticles

A derivative spectrophotometric method was validated for quantification of acyclovir in poly (n-butylcyanoacrylate) (PBCA) nanoparticles. Specificity, linearity, precision, accuracy, recovery, detection (LOD) and quantification (LOQ) limits were established for method validation. First-derivative at 295.2 nm eliminated interferences from nanoparticle ingredients and presented linearity for acyclovir concentrations ranging from 1.25 to 40.0 µg/mL (r = 0.9999). Precision and accuracy data demonstrated good reproducibility. Recovery ranged from 99.3 to 101.2. LOD was 0.08 µg/mL and LOQ, 0.25 µg/mL. Thus, the proposed method proved to be easy, low cost, and accurate, and therefore, an useful alternative to quantify acyclovir in nanoparticles.

Performance characteristics of high performance liquid chromatography, first order derivative UV spectrophotometry and bioassay for fluconazole determination in capsules

The bioassay, first order derivative UV spectrophotometry and chromatographic methods for assaying fluconazole capsules were compared. They have shown great advantages over the earlier published methods. Using the first order derivative, the UV spectrophotometry method does not suffer interference of excipients. Validation parameters such as linearity, precision, accuracy, limit of detection and limit of quantitation were determined. All methods were linear and reliable within acceptable limits for antibiotic pharmaceutical preparations being accurate, precise and reproducible. The application of each method as a routine analysis should be investigated considering cost, simplicity, equipment, solvents, speed, and application to large or small workloads.

Monitoring of praseodymium(III) ions in aqueous solutions, soil and sediment samples by a PVC membrane sensor based on a furan-triazole derivative

A furan-triazole derivative has been explored as an ionophore for preparation of a highly selective Pr(III) membrane sensor. The proposed sensor exhibits a Nernstian response for Pr(III) activity over a wide concentration range with a detection limit of 5.2×10-8 M. Its response is independent of pH of the solution in the range 3.0-8.8 and offers the advantages of fast response time. To investigate the analytical applicability of the sensor, it was applied successfully as an indicator electrode in potentiometric titration of Pr(III) solution and also in the direct and indirect determination of trace Pr(III) ions in some samples.

Aplysfistularine: a novel dibromotyrosine derivative isolated from Aplysina fistularis

The new dibromotyrosine derivative 3,5-dibromo-4-[3'dimethylamonium]propoxyphenyl]-N,N,N-trimethylethanamonium, here referred to as aplysfistularine (1), was isolated from the marine sponge Aplysina fistularis along with 2-(3,5-dibromo-4methoxyphenyl)-N,N,N-trimethylethanamonium (2), aplysterol (3) and 24,28-didehydroaplysterol (4). Their identification was performed by mass spectrometry, infrared, ¹H and 13C NMR, and by comparison with literature data. Compound 2 and the mixture of 3 and 4 were tested in vitro (inhibitory activity) with supercoiled DNA relaxation techniques, and showed inhibitory activity on human DNA topoisomerase II-α. Compound 1 was not tested due to paucity of the material.

Separation and preconcentration of copper in environmental samples on Amberlite XAD-8 resin after complexation with a carbothioamide derivative

A new solid phase extraction (SPE) method has been developed for the selective separation and preconcentration of Cu (II) ions in food and water samples prior to its flame atomic absorption spectrometry determination. The method is based on the adsorption of the Cu(II) - 2-{[4-Amino-3-(4-methylphenyl-5-oxo-4,5-dihydro-1H-1,2,4-triazol-1-yl]acetyl}-N-phenyl hydrazinecarbothioamide complex on Amberlite XAD-8 resin. The metal complex retained on the resin was eluted with 7.5 mL of 2.0 mol L-1 HCl in acetone. The optimum conditions for the SPE of Cu(II) ions were investigated, and the method was subsequently applied to sea water, stream water, rice, tea, and tobacco samples for the determination of Cu(II) levels.

Bioanalytical method for the quantification of the monastrol derivative anticancer candidate lasom 65 in pre-clinical pharmacokinetic investigations

A simple HPLC/UV method was developed for the determination of the anticancer candidate LaSOM 65 in rat plasma. Samples were cleaned by protein precipitation with acetonitrile (recovery > 95%), after which they were subjected to chromatography under the isocratic elution of an acetonitrile:water (45:55, ν/ν) solution with detection at 303 nm. The method was linear (r² > 0.98) over the concentration range (0.05-2 µg mL-1) with intra- and inter-day precision ranging from 9.6% to 13.6% and 4.3% to 5.4%, respectively. The accuracy of the method ranged from 85% to 113.6%, and it showed sufficient sensitivity to determine pharmacokinetic parameters of LaSOM 65 after intravenous administration to Wistar rats.

Fe3+-SELECTIVE ENHANCED FLUORESCENCE PROBE BASED ON A RHODAMINE DERIVATIVE

A novel Fe3+-selective and turn-on fluorescent probe 1 incorporating a rhodamine fluorophore and quinoline subunit was synthesized. Probe 1 displayed high selectivity for Fe3+ in CH3CN–H2O (95:5 v/v) in the presence of other relevant metal cations. Interaction with Fe3+ in 1:1 stoichiometry could trigger a significant fluorescence enhancement due to the formation of the ring-open form. The fluorescent response images were investigated by a novel Euclidean distance method based on red, green, and blue values. A linear relationship was observed between fluorescence intensity changes and Fe3+ concentrations from 7.3 × 10−7 to 3.6 × 10−5 mol L−1.

Herança da resistência à mancha-angular do feijoeiro e identificação de marcadores moleculares flanqueando o loco de resistência

A mancha-angular, cujo agente causal é o fungo Phaeoisariopsis griseola, é uma das principais doenças do feijoeiro comum (Phaseolus vulgaris). Os marcadores moleculares disponíveis ainda não são suficientes para monitorar todos os genes de resistência a essa doença. Por isso, objetivou-se neste trabalho estudar a herança da resistência aos patótipos 63.39 e 31.23 de P. griseola, em populações derivadas de 'Ouro Negro' (ON) e 'US Pinto 111' (PT), e identificar marcadores moleculares ligados a genes de resistência presentes nessas cultivares. Quando inoculadas com o patótipo 63.39, as plantas ON, F1 (ON x PT) e 3/4 da população F2 mostraram-se resistentes enquanto que PT e 1/4 da população F2 foram suscetíveis. Quando inoculadas com o patótipo 31.23, as plantas PT e 1/4 das famílias F2:3 foram resistentes e todas as demais, suscetíveis. Esses dados indicam que a resistência proveniente de ON é conferida por um gene dominante enquanto que a de PT, por um recessivo. Esses dois genes segregaram independentemente. Amostras de DNA das plantas F2 foram amplificadas pela técnica de RAPD (random amplified polymorphic DNA) de acordo com a estratégia de análise de bulks segregantes. Foram identificados os marcadores OPM02(460C) e OPAA19(600C,) respectivamente a 5,3 e 10 centimorgans (cM) do loco de resistência proveniente de ON. Eles flanqueiam este loco e, quando empregados simultaneamente, proporcionam uma eficiência de seleção de 97,4%. Não foram identificados marcadores para o loco de resistência proveniente de PT.

Resistência de cultivares de feijoeiro-comum à ferrugem e à mancha-angular em condições de casa de vegetação

Foram inoculadas 17 cultivares de feijoeiro-comum (Phaseolus vulgaris) recomendadas para plantio em Minas Gerais com cinco patótipos (6, 7, 9, 10 e 12) de Uromyces appendiculatus e cinco (63.55, 31.23, 63.39, 31.55 e 63.23) de Phaeoisariopsis griseola. Foi conduzido um ensaio separadamente para cada um dos patótipos dos dois patógenos, totalizando 10 ensaios. Nos ensaios de ferrugem foi avaliada a freqüência de infecção (FI) e estimado o tamanho médio das pústulas (TMP) e, nos ensaios de mancha-angular foram avaliados os sintomas utilizando uma escala de notas variando de 1 a 9. A maioria das cultivares se mostrou suscetível a pelo menos três dos cinco patótipos de ferrugem. As cultivares mais suscetíveis foram Roxo 90 e Meia Noite e a mais resistente foi a Ouro Negro, a qual apresentou proteção completa aos cinco patótipos testados. Com relação à mancha angular, além do Roxo 90, as cultivares Carioca MG, Pérola, Carioca 1030 e Aporé, extensivamente plantadas em Minas Gerais, foram altamente suscetíveis. As cultivares Ouro Negro e EMGOPA 201-Ouro apresentaram genes de resistência a diferentes patótipos e a combinação desses genes em uma nova cultivar resultaria em resistência a todos os patótipos testados.

Mapeamento de genes de resistência do feijoeiro à ferrugem, antracnose e mancha-angular usando marcadores RAPD

A organização de diferentes genes de resistência da cultivar Ouro Negro de feijoeiro-comum (Phaseolus vulgaris) à ferrugem, antracnose e mancha-angular foi estudada com o auxílio de marcadores moleculares. Uma população de 154 linhas endogâmicas recombinantes (RIL's) obtidas do cruzamento entre as cultivares Ouro Negro e Rudá foram inoculadas com sete raças fisiológicas de Uromyces appendiculatus, três de Colletotrichum lindemuthianum, e quatro de Phaeoisariopsis griseola. Amostras de DNA de cada uma das RIL's foram amplificadas via PCR utilizando 70 diferentes primers. A análise da segregação da resistência à ferrugem, antracnose e mancha-angular na população de 154 RIL's revelou diferentes modos de herança para a resistência a cada uma das raças fisiológicas. A análise de ligação genética revelou que os diferentes genes de resistência à ferrugem e à antracnose estão no mesmo grupo de ligação. Os genes de resistência à mancha-angular também foram mapeados juntos, porém em outro grupo de ligação. Verificou-se neste trabalho que a utilidade dos marcadores RAPD, previamente identificados como ligados a genes de resistência do feijoeiro a doenças foi restrita. Apenas cinco dos 38 marcadores moleculares testados foram validados na população de RIL's como ligados aos genes de resistência à ferrugem e à antracnose. Três novos marcadores (OBA16(669) e OBA16(583) a 10,4 cM em acoplamento e OAD9(3210) a 13,9 cM em repulsão) ligados ao bloco gênico de resistência da cultivar Ouro Negro à mancha-angular foram identificados.

Quantificação de componentes monocíclicos da mancha angular do feijoeiro

Foram realizados experimentos em ambiente controlado, em câmaras de crescimento, com duas cultivares de feijoeiro (Phaseolus vulgaris), Rosinha e Carioca, para a quantificação de componentes monocíclicos da mancha angular. Os componentes monocíclicos avaliados foram: período de incubação, severidade da doença e taxa de crescimento das lesões, sob as temperaturas de 6, 10, 14, 17, 21, 25, 29 e 33 ºC. Nenhum sintoma da mancha angular ocorreu em 6 e 33 ºC. A severidade da mancha angular foi elevada na faixa de temperatura entre 20 e 25 ºC e o período de incubação foi favorecido pela temperatura de 25 ºC, para as duas cultivares testadas. Esta temperatura também proporcionou a maior taxa de crescimento das lesões e estes dados foram ajustados, em função da temperatura por uma equação do primeiro grau. O efeito do período de molhamento foliar (5, 6, 12, 18, 24, 30, 36, 42, 48 e 54 h) na severidade da doença também foi avaliado. A severidade da mancha angular do feijoeiro aumentou com o aumento da duração do molhamento foliar até o máximo de 54 h. As variações de severidade da mancha angular do feijoeiro, em relação ao número de horas de molhamento foliar, foram explicadas pelo modelo de Richards. A função Beta-Richards explicou o efeito combinado da temperatura e da duração do molhamento foliar na severidade da mancha angular do feijoeiro para ambas as cultivares.