Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis

Finland has large forest fuel resources. However, the use of forest fuels for energy production has been low, except for small-scale use in heating. According to national action plans and programs related to wood energy promotion, the utilization of such resources will be multiplied over the next few years. The most significant part of this growth will be based on the utilization of forest fuels, produced from logging residues of regeneration fellings, in industrial and municipal power and heating plants. Availability of logging residues was analyzed by means of resource and demand approaches in order to identify the most suitable regions with focus on increasing the forest fuel usage. The analysis included availability and supply cost comparisons between power plant sites and resource allocation in a least cost manner, and between a predefined power plant structure under demand and supply constraints. Spatial analysis of worksite factors and regional geographies were carried out using the GIS-model environment via geoprocessing and cartographic modeling tools. According to the results of analyses, the cost competitiveness of forest fuel supply should be improved in order to achieve the designed objectives in the near future. Availability and supply costs of forest fuels varied spatially and were very sensitive to worksite factors and transport distances. According to the site-specific analysis the supply potential between differentlocations can be multifold. However, due to technical and economical reasons ofthe fuel supply and dense power plant infrastructure, the supply potential is limited at plant level. Therefore, the potential and supply cost calculations aredepending on site-specific matters, where regional characteristics of resourcesand infrastructure should be taken into consideration, for example by using a GIS-modeling approach constructed in this study.

Toimintolaskennan sovellettavuus koulutusorganisaation ohjauksessa Case: Päijät-Hämeen koulutuskonserni

Oppilaitoksiin kohdistuvaa lainsäädäntöä on muutettu siten, että omistajayhteisöjen vastuuta on huomattavasti lisätty. Tämän vuoksi oppilaitosten omistajayhteisöt joutuvat etsimään uusia keinoja toimintansa ohjaamiseksi. Tällöin tukeudutaan teollisuuden ohjausjärjestelmiin, joiden toimivuutta oppilaitosten ohjauksessa ei tunneta. Tämän työn tavoitteena on tutkia toimintolaskennan soveltuvuutta koulutusorganisaation ohjaukseen. Toimintolaskentaa käytetään nykyisin hyvin yleisesti teollisuudessa. Myös jotkut nonprofit-organisaatiot ovat ottaneet sen käyttöön. Tutkimus on kohdennettu Päijät-Hämeen koulutuskonserniin, jossa tutkittiin Opetushallituksen kustannuslaskentajärjestelmän sopivuutta toiminnan ohjaukseen. Tutkimuksen tuloksena voidaan todeta, että Opetushallituksen kustannuslaskentajärjestelmä voi olla toimintolaskentajärjestelmän pohjana, koska se kuvaa hyvin oppilaitosten toimintaa ja on helppo käyttää. Se soveltuu kohtuullisesti myös tasapainotetun mittariston osaksi.

Cost information in engineering design -Potentials and limitations of activity-based costing

The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.

Activity-based life cycle costing model for cost estimation and monitoring – Case: manned and autonomous dry bulk carrier

Recent developments in automation, robotics and artificial intelligence have given a push to a wider usage of these technologies in recent years, and nowadays, driverless transport systems are already state-of-the-art on certain legs of transportation. This has given a push for the maritime industry to join the advancement. The case organisation, AAWA initiative, is a joint industry-academia research consortium with the objective of developing readiness for the first commercial autonomous solutions, exploiting state-of-the-art autonomous and remote technology. The initiative develops both autonomous and remote operation technology for navigation, machinery, and all on-board operating systems. The aim of this study is to develop a model with which to estimate and forecast the operational costs, and thus enable comparisons between manned and autonomous cargo vessels. The building process of the model is also described and discussed. Furthermore, the model’s aim is to track and identify the critical success factors of the chosen ship design, and to enable monitoring and tracking of the incurred operational costs as the life cycle of the vessel progresses. The study adopts the constructive research approach, as the aim is to develop a construct to meet the needs of a case organisation. Data has been collected through discussions and meeting with consortium members and researchers, as well as through written and internal communications material. The model itself is built using activity-based life cycle costing, which enables both realistic cost estimation and forecasting, as well as the identification of critical success factors due to the process-orientation adopted from activity-based costing and the statistical nature of Monte Carlo simulation techniques. As the model was able to meet the multiple aims set for it, and the case organisation was satisfied with it, it could be argued that activity-based life cycle costing is the method with which to conduct cost estimation and forecasting in the case of autonomous cargo vessels. The model was able to perform the cost analysis and forecasting, as well as to trace the critical success factors. Later on, it also enabled, albeit hypothetically, monitoring and tracking of the incurred costs. By collecting costs this way, it was argued that the activity-based LCC model is able facilitate learning from and continuous improvement of the autonomous vessel. As with the building process of the model, an individual approach was chosen, while still using the implementation and model building steps presented in existing literature. This was due to two factors: the nature of the model and – perhaps even more importantly – the nature of the case organisation. Furthermore, the loosely organised network structure means that knowing the case organisation and its aims is of great importance when conducting a constructive research.

Communicating Cost Information to Design Engineers using an Activity-based Costing Method

This paper analyzes the possibilities of integrating cost information and engineering design. Special emphasis is on finding the potential of using the activity-based costing (ABC) method when formulating cost information for the needs of design engineers. This paper suggests that ABC is more useful than the traditional job order costing, but the negative issue is the fact that ABC models become easily too complicated, i.e. expensive to build and maintain, and difficult to use. For engineering design the most suitable elements of ABC are recognizing activities of the company, constructing acitivity chains, identifying resources, activity and cost drivers, as wellas calculating accurate product costs. ABC systems including numerous cost drivers can become complex. Therefore, a comprehensive ABC based cost information system for the use of design engineers should be considered criticaly. Combining the suitable ideas of ABC with engineering oriented thinking could give competentresults.

Working capital management in the small and medium-sized enterprises Case: Project-based business environment in Flowrox Oy

This Master´s thesis illustrates how growing a business ties up the company´s working capital and what the cost of committed capital. In order to manage a company´s working capital in rapid business growth phase, the thesis suggests that by monitoring and managing the operating and cash conversion cycles of customers´ projects, a company can find ways to secure the required amount of capital. The research method of this thesis was based on literature reviews and case study research. The theoretical review presents the concepts of working capital and provides the background for understanding how to improve working capital management. The company in subject is a global small and medium-sized enterprise that manufactures pumps and valves for demanding process conditions. The company is expanding, which creates lots of challenges. This thesis concentrates to the company´s working capital management and its efficiency through the supply chain and value chain perspective. The main elements of working capital management are inventory management, accounts receivable management and accounts payable management. Prepayments also play a significant role, particularly in project-based businesses. Developing companies´ working capital management requires knowledge from different kind of key operations´ in the company, like purchasing, production, sales, logistics and financing. The perspective to develop and describe working capital management is an operational. After literature reviews the thesis present pilot projects that formed the basis of a model to monitor working capital in the case company. Based on analysis and pilot projects, the thesis introduces a rough model for monitoring capital commitments in short time period. With the model the company can more efficiently monitor and manage their customer projects.

Validation and Selection of Transportation Cost Drivers with Advanced Methods

In today's logistics environment, there is a tremendous need for accurate cost information and cost allocation. Companies searching for the proper solution often come across with activity-based costing (ABC) or one of its variations which utilizes cost drivers to allocate the costs of activities to cost objects. In order to allocate the costs accurately and reliably, the selection of appropriate cost drivers is essential in order to get the benefits of the costing system. The purpose of this study is to validate the transportation cost drivers of a Finnish wholesaler company and ultimately select the best possible driver alternatives for the company. The use of cost driver combinations as an alternative is also studied. The study is conducted as a part of case company's applied ABC-project using the statistical research as the main research method supported by a theoretical, literature based method. The main research tools featured in the study include simple and multiple regression analyses, which together with the literature and observations based practicality analysis forms the basis for the advanced methods. The results suggest that the most appropriate cost driver alternatives are the delivery drops and internal delivery weight. The possibility of using cost driver combinations is not suggested as their use doesn't provide substantially better results while increasing the measurement costs, complexity and load of use at the same time. The use of internal freight cost drivers is also questionable as the results indicate weakening trend in the cost allocation capabilities towards the end of the period. Therefore more research towards internal freight cost drivers should be conducted before taking them in use.

Kustannuslaskennan kehittäminen työkoneyrityksessä

Yrityksen tärkein taloudellinen tehtävä on sen omistajien voiton maksimointi. Oikea ja tarkoituksenmukainen laskentajärjestelmä voi osaltaan olla apuna tuon tavoitteen saavuttamisessa. Tässä tutkimuksessa pureuduttiin erään työkoneyrityksen laskentajärjestelmän uudistamiseen. Tutkimuksen päätavoitteena oli kehittää työkoneyrityksen kustannuslaskenta konekohtaiseksi toimintolaskentaa hyväksikäyttäen sekä alatavoitteena selvittää antaisivatko tulokset aihetta mallin kokonaisvaltaiseen käyttöönottoon yrityksessä. Teoriaosan alatavoitteena oli tarkastella eri laskentajärjestelmiä yleisesti sekä toimintolaskentaa syvällisemmin. Tutkimus toteutettiin päätöksentekometodologisella tutkimusotteella ja oli luonteeltaan tapaustutkimus. Tuloksina saatiin selville kahdelle erikokoiselle työkoneelle tarkka tuntikustannus. Kävi myös ilmi, että konetyön tilaajalle suoritettavan palvelun täysipainoiseen suorittamiseen vaadittavat, vaikkakin varsinaiseen konetyöhön kuulumattomat, lisätoiminnot voivat muodostua konetyön suorittajalle kuviteltua kalliimmiksi.

Kokorunkoaseman kautta tehtyjen tilauserien analysointi ja ohjaus sahateollisuudessa

Tutkimuksessa analysoitiin erään sahateollisuusyrityksen sahatavarakauppoja, joihin katkottiin tukkeja yrityksen kokorunkoasemalla. Tavoite oli kaksijakoinen: ensinnäkin analysoida runkoaseman toimintaa ja laskea katkonnan kokonais-, sekä kuutiokohtaisia kustannuksia eri runkomäärillä. Toiseksi pyrittiin luomaan tilauseräkohtainen kustannuslaskentamalli sellaisille sahatavarakaupoille, joihin kuuluu pituusehtoja. Kustannuslaskentamallissa sovellettiin lähinnä toimintolaskennan tapaa siltä osin, kuin sitä voitiin divergoivaan valmistusprosessiin soveltaa. Teoreettisen tutkimuksen pääpaino on hinnoittelussa, koska laskentamallin tarkoitus on avustaa myyntiä hintapäätöksiä tehdessä. Hinnoittelusta käsitellään eri hinnoittelustrategiat, -menetelmät, sekä mitä yrityksen tulee ottaa huomioon hinnoittelussa sellaisissa tilanteissa, kun markkinatilanteet vaihtelevat. Teoriaosuudessa käsitellään myös erilaisia kustannuslaskentatapoja, joista pääpaino annetaan toimintolaskennalle. Lopuksi on analysoitu laskentamallista saatavia hyötyjä, sekä sitä mihin sitä voidaan parhaiten käyttää. Vastaavasti arvioitiin millaisia puutteita laskentamallista löytyy, mitä kehittämisen kohteita siinä voisi olla.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Tietoteknisten palveluiden tuottaminen strategisena kumppanuutena - case Rajavartiolaitos

Tutkimuksen tarkoituksena on selvittää laajennettujen transaktiokustannustarkastelun avulla tietoteknisten palveluiden hankintaa strategisena kumppanuutena. Tutkimus kuvaa empiirisen esimerkkitapauksen kautta ulkoistuksen kokonaisvaikuttavuutta eli kumppanuuden hyötyjä ja haittoja asiakkaan kannalta tilanteessa, jossa julkisen sektorin tehtävien uudelleenorganisoinnissa ei ole käytettävissä tehokkaita markkinoita. Kumppanuuden kokonaisvaikuttavuuden elementtien merkitys asiakkaalle on asiakkaan ja palveluntuottajan näkökulmista erilaisia. Asiakas pitää transaktiokustannuksia ja byrokratiahyötyjä tärkeinä. Toimittaja taas koros-taa transaktiohyötyjä ja byrokratiakustannuksia.

Elinkaaripohjaiseen ABC-analyysiin perustuva päätöksenteontukijärjestelmä

Yritysten vaihto-omaisuudenhallinnasta löytyy usein selviä puutteita. Yksi selkeä syy tähän on perinteisen ABC-analyysin riittämättömyys, joka pohjautuu puhtaasti historiatietoihin. ABC-analyysia oikein tulkitsemalla, voi siitä kuitenkin saada erinomaisen työkalun varastonhallintaan. Tämä edellyttää tuotteen elinkaarenvaiheen huomioimista. Tätä elinkaarenvaiheet huomioivaa ABC-analyysia kutsutaan elinkaaripohjaiseksi ABC-analyysiksi. Koska nykyisissä toiminnanohjausjärjestelmissä ei kuitenkaan ole mahdollista luokitella tuotteita tämän uuden menetelmän mukaisesti, syntyy tarve tukijärjestelmälle. Tukijärjestelmän tarkoituksena on sekä luokitella tuotteet elinkaaripohjaisen ABC-analyysin avulla että antaa tuotteille varastonohjaussuositukset Salmivuori Consulting Oy:n käyttämän ohjausmenetelmän mukaisesti. Varastotasojen määrittämistä helpottamaan luotiin järjestelmän yhteyteen vielä erillinen ohjaustyökalu. Lisäksi työssä on havainnollistettu keskimääräistä varaston arvoa sekä puutekustannuksia minimoivien varastotasojen valintaa case-esimerkin avulla. Järjestelmän luomien tuoteluokkien sekä varastonohjaussuositusten avulla, päätöksentekijällä on mahdollisuudet tehostaa yrityksen vaihto-omaisuudenhallintaa.

Analysis of Satellite Data for Forest Segmentation

In this work we study the classification of forest types using mathematics based image analysis on satellite data. We are interested in improving classification of forest segments when a combination of information from two or more different satellites is used. The experimental part is based on real satellite data originating from Canada. This thesis gives summary of the mathematics basics of the image analysis and supervised learning , methods that are used in the classification algorithm. Three data sets and four feature sets were investigated in this thesis. The considered feature sets were 1) histograms (quantiles) 2) variance 3) skewness and 4) kurtosis. Good overall performances were achieved when a combination of ASTERBAND and RADARSAT2 data sets was used.

Comparing service contract prices of outsourcing partner

The main objective of this Master’s thesis is to find out which one of the two pricing models is the most cost-effective. In this thesis there are two companies that have made an outsourcing contract, in which they have a possibility to choose between two different pricing models. The first model is so called FTE (Full Time Employee) -based. The total cost will be based on the amount of outsourced person-workyears. The second pricing model is the transaction-based, in which the price will be formed according to the amount of transactions. Changing the pricing model from FTE-based to the transaction-based will also incur other costs. It is very important that these other costs are also taken into consideration, so that it is possible to determine the total costs of the pricing models. These other costs are direct costs, indirect costs and performance related costs of outsourcing. Activity based-costing (ABC) was used in order to find out the trues indirect costs of the outsourced processes. Performance related costs are related to quality, so Pareto-analysis was used to analyse the costs. Based on all of that, a framework for service related cost analysis was developed. Quality costs were almost impossible to quantify, so quality had to be taken into consideration in a qualitative way. Furthermore, considering only the indirect and direct costs in a quantitative way and quality costs in a qualitative way, it was possible to find a conditional solution for the research question.

Toimintaprosessin kehittäminen sairaalaympäristössä teollisuustalouden menetelmin

Työn tavoitteena on tutkia reaaliaikaisen sanelunpurun vaikuttavuutta ja kannattavuutta. Reaaliaikaisen sanelunpurun vaikuttavuuden tarkastelun pohjana käytetään teollisuustalouden puolella tunnettuja ja yrityksissä laajasti käytössä olevia ajatusmalleja, kuten Leania ja Six Sigmaa. Lean –ajattelu perustuu läpimenoajan nopeuttamiseen, hukkaa ja ei lisäarvoa luovien vaiheiden eliminoimisella. Six Sigma keskittyy taas laatuun, jolloin tuote ja palveluvirheitä karsitaan. Lisäksi teoriaosassa käsitellään palveluiden ulkoistamista, tietosuojaa ja palkkakustannusten rakennetta. Empiriaosassa kuvataan kirurgianpoliklinikan ja leikkausosaston prosesseja. Prosesseissa keskitytään nykytilan sekä reaaliaikaisen sanelunpurun vaikutuksiin. Prosessien kuvaamisella saadaan tietoa toiminnan ongelmista ja kehittämiskohteista. Henkilökunnan haastatteluin selvitettiin sanelujonon vaikutuksia sekä kokemuksia ulkoistamisesta. Kustannusanalyysin avulla selvitettiin ulkoistamisen kannattavuutta reaaliaikaisessa sanelunpurussa. Työn tuloksena saatiin vaikuttavuus tarkastelu reaaliaikaisesta sanelunpurusta sekä ulkoistamisen kannattavuudesta. Prosessien kuvaaminen osoittaa, että useissa prosessin eri vaiheissa sanelujen puuttuminen aiheuttaa kustannuksia ja vaikuttaa henkilökunnan työhön. Kustannusanalyysin pohjalta sanelunpurun ulkoistaminen todettiin kannattavaksi. Jatkossa sanelunpurun ulkoistamisessa tulee kiinnittää huomiota siihen, mitkä osat sanelunpurkuprosessista halutaan ulkoistaa. Sähköisten järjestelmien kehittyminen vaikuttaa osaltaan tähän päätökseen. Lisäksi suoritepohjaisen hinnoittelun kehittäminen on tärkeä osa sanelunpurkuprosessin tehokkuutta.