Effects of Government Ownership on Firm Performance: Evidence from Finnish Companies

Tutkimuksen tarkoituksena on selvittää, miten valtionomistajuus vaikuttaa yrityksen suorituskykyyn suomalaisissa pörssinoteeratuissa valtionyhtiöissä, joissa valtio toimii pää- tai osaomistajana. Suorituskykyä tutkitaan kandella eri menetelmällä. Ensin tutkitaan osaketuottoja Jensenin alfan avulla, jonka jälkeen suoritetaan tilinpäätöstunnuslukujen toimialavertailu. Tutkimuksen teoriaosuudessa esitetään yksityistämisen tuottamia etuja yrityksen taloudelliseen suorituskykyyn, sekä myöskin valtionomistajuuden tuottamia etuja. Lisäksi teoriaosuudessa käsitellään aikaisempien empiiristen tutkimusten tuloksia valtionomistajuuden vaikutuksista. Tämän tutkimuksen empiirisessä osiossa käytettävä data on saatu osakedatan osalta Datastreamista ja tilinpäätöstunnuslukujen osalta Balance Consulting Oy:ltä. Kokonaisosakedataa koskeva tutkimus Jensenin alfalla ei osoittanut valtionyhtiöiden toimivan tehottomasti, vaan osoitti yritysten kyenneen tuottamaan epänormaaleja tuottoja riskitasoonsa nähden. Vuositasolle pilkotun datan analysointi sen sijaan tuotti useita negatiivisia alfoja yrityksille eli merkkejä tehottomuudesta tiettyinä vuosina. Lisäksi tilinpäätöstunnuslukujen analysointi osoitti osan valtionyhtiöistä olleen pääosin omaa toimialaansa tehottomampia, kun taas osa kykenipäihittämään toimialansa.

Dynamic analysis of belt-drives using the absolute nodal coordinate formulation

Belt-drive systems have been and still are the most commonly used power transmission form in various applications of different scale and use. The peculiar features of the dynamics of the belt-drives include highly nonlinear deformation,large rigid body motion, a dynamical contact through a dry friction interface between the belt and pulleys with sticking and slipping zones, cyclic tension of the belt during the operation and creeping of the belt against the pulleys. The life of the belt-drive is critically related on these features, and therefore, amodel which can be used to study the correlations between the initial values and the responses of the belt-drives is a valuable source of information for the development process of the belt-drives. Traditionally, the finite element models of the belt-drives consist of a large number of elements thatmay lead to computational inefficiency. In this research, the beneficial features of the absolute nodal coordinate formulation are utilized in the modeling of the belt-drives in order to fulfill the following requirements for the successful and efficient analysis of the belt-drive systems: the exact modeling of the rigid body inertia during an arbitrary rigid body motion, the consideration of theeffect of the shear deformation, the exact description of the highly nonlinear deformations and a simple and realistic description of the contact. The use of distributed contact forces and high order beam and plate elements based on the absolute nodal coordinate formulation are applied to the modeling of the belt-drives in two- and three-dimensional cases. According to the numerical results, a realistic behavior of the belt-drives can be obtained with a significantly smaller number of elements and degrees of freedom in comparison to the previously published finite element models of belt-drives. The results of theexamples demonstrate the functionality and suitability of the absolute nodal coordinate formulation for the computationally efficient and realistic modeling ofbelt-drives. This study also introduces an approach to avoid the problems related to the use of the continuum mechanics approach in the definition of elastic forces on the absolute nodal coordinate formulation. This approach is applied to a new computationally efficient two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation. The proposed beam element uses a linear displacement field neglecting higher-order terms and a reduced number of nodal coordinates, which leads to fewer degrees of freedom in a finite element.

Osakeperusteinen palkitseminen: maksuttoman osakkeen hyödyntäminen kannustinjärjestelmissä

Tutkielman tavoitteena on selvittää osakeyhtiön palkitsemisjärjestelmiin liittyviä kysymyksiä päämies–agenttisuhteiden ja osakeyhtiöoikeudellisten periaatteiden kautta. Tutkielmassa selvitetään, kuinka maksuttomia osakkeita voidaan hyödyntää julkisen osakeyhtiön palkitsemisjärjestelmissä ja mitä haasteita ja mahdollisuuksia niiden käyttöön liittyy. Tutkimusmetodi työssä on lainopillinen ja aihetta lähestytään luontevasti kauppatieteellisen ja oikeustieteellisen näkökulman yhdistävän oikeustaloustieteen kautta. Ensisijaisena aineistona tutkielmassa käytetään voimassaolevaa lainsäädäntöä valmisteluaineistoineen ja näkökulmaa syvennetään aiemmin voimassa olleen lainsäädännön tarkastelulla. Toissijaisena aineistona tutkielmassa käytetään sekä eri asiantuntijoiden oikeudellista kirjallisuutta että palkitsemisen asiantuntijoiden laatimaa kirjallisuutta Suomesta ja muista länsimaista. Teoreettista työtä on syvennetty asiantuntijahaastattelulla ja yhtiöiden sijoittajatiedosta saatavalla informaatiolla. Merkittävin osakeyhtiön johdon ja yhtiön välisen suhteen tehokkuutta alentava seikka on päämies–agenttisuhteen valvontaongelma. Tämä liittyy päämies - agenttisuhteeseen, joka ilmenee negatiivisesti yhtiön ja yhtiön johdon intressien ristiriitatilanteissa. Valvontaongelma voi aiheuttaa ylimääräisiä transaktiokustannuksia ja tämä näkyy yhtiön toiminnan tehokkuuden laskemisena. Päämies–agenttisuhteen ratkaisuna lainsäädäntö ja erilaiset valvonnan keinot ovat tehottomia ja nykyisen yhtiöoikeudellisen ajattelun vastaisia. Tehokkaimmin valvontaongelma saadaan ratkaistua erilaisin kannustimin tapahtuvalla johdon ohjauksella. Osakesidonnainen palkitseminen on suosituin johdon ja yhtiön intressien yhdistämisen keino. Osakesidonnainen palkitseminen on parhaimmillaan eri osapuolien näkökulmasta sitouttavaa ja kannustavaa mutta osakepalkitsemisen käyttöön liittyy myös riskejä. Eräs keskeisistä yhtiöoikeudellisista periaatteista on yhdenvertaisuus, jota saatetaan loukata eri palkitsemisjärjestelmiä käytettäessä. Varojen jakoon ja järjestelmien rahoitukseen liittyy niin ikään riskejä, jotka saattavat vaarantaa järjestelmän onnistumisen. Liian avokätiset palkkiojärjestelmät taas saattavat aiheuttaa yhtiön eri sidosryhmien piirissä tyytymättömyyttä joka taas alentaa järjestelmän tehokkuutta. Yhtiön johto vastaa yhtiön strategian toteutumisesta ja linjaa Corporate Governance käytännön mukaisesti johdon palkitsemisen tavat. Yhtiön johto on kuitenkin päätöksistään vastuussa yhtiön residuaalioikeuden omaaville päämiehille, eli osakkeenomistajille. Vaikka yhtiön johto vastaa viime kädessä yhtiön toiminnasta, sen on huomioitava toiminnassaan yhtiön toiminnan tarkoitus ja sitä kautta yksittäisen osakkeenomistajan etu. Vaikka osakeyhtiössä toteutettaisiin enemmistöomistajan valitsemaa toimintalinjaa, osakeyhtiön yhdenvertaisuusperiaate korostaa juuri vähemmistöosakkeenomistajan asemaa. Johdon fidusiaaristen velvoitteiden voidaankin nähdä korostuvan johdon suhteessa vähemmistöosakkeenomistajaan. Tämä on huomioitava myös palkitsemisjärjestelmissä. Johdon palkitsemisjärjestelmien suunnittelussa ja toteutuksessa on suunnattava keskeinen huomio sen tavoitteiden toteutumiseen, eli yksittäisen osakkeenomistajan omistuksen arvon kasvattamiseen pidemmällä aikavälillä, pitäen huolta osakeyhtiön kantavista periaatteista.

Testing the Random Walk Hypothesis on the Baltic Stock Markets

The purpose of the thesis is to analyze whether the returns of general stock market indices of Estonia, Latvia and Lithuania follow the random walk hypothesis (RWH), and in addition, whether they are consistent with the weak-form efficiency criterion. Also the existence of the day-of-the-week anomaly is examined in the same regional markets. The data consists of daily closing quotes of the OMX Tallinn, Riga and Vilnius total return indices for the sample period from January 3, 2000 to August 28, 2009. Moreover, the full sample period is also divided into two sub-periods. The RWH is tested by applying three quantitative methods (i.e. the Augmented Dickey-Fuller unit root test, serial correlation test and non-parametric runs test). Ordinary Least Squares (OLS) regression with dummy variables is employed to detect the day-of-the-week anomalies. The random walk hypothesis (RWH) is rejected in the Estonian and Lithuanian stock markets. The Latvian stock market exhibits more efficient behaviour, although some evidence of inefficiency is also found, mostly during the first sub-period from 2000 to 2004. Day-of-the-week anomalies are detected on every stock market examined, though no longer during the later sub-period.

Warranttihaarojen tuotot ja markkinoiden tehokkuus Nokian osavuosikatsausten yhteydessä vuosina 2002-2009

Työssä pyrittiin löytämään indikaatioita markkinoiden epätehokkuudesta ja arbitraasimahdollisuuksia Suomen warranttimarkkinoilla muodostamalla osavuosikatsausten ympärille erilaisia aikaikkunoita at-the-money warranttihaaroilla. Kohde-etuutena käytettiin Nokian osaketta. Tilastollista merkitsevyyttä testattiin haarojen päivittäisistä logaritmisista tuotoista muodostetulla jakaumalla ja Excelin prosenttijärjestys() -funktiolla. Työn pohjana käytettiin McKentzien, Thomsenin ja Phelanin (2007) työtä, jossa löydettiin teurassikafutuurimarkkinoilta tilastollisesti merkitseviä tuottoja straddle-haaroilla markkinakatsausten aikana. Työssä ei löydetty tilastollisesti merkitseviä tuottoja tai tappioita pääasialli-sella merkitsevyyden mittausmenetelmällä, mutta kahdensuuntaista t-jakauman jakaumaa käyttämällä kyllä.

Monitoring of centrifugal pump operation by a frequency converter

Centrifugal pumps are widely used in industrial and municipal applications, and they are an important end-use application of electric energy. However, in many cases centrifugal pumps operate with a significantly lower energy efficiency than they actually could, which typically has an increasing effect on the pump energy consumption and the resulting energy costs. Typical reasons for this are the incorrect dimensioning of the pumping system components and inefficiency of the applied pump control method. Besides the increase in energy costs, an inefficient operation may increase the risk of a pump failure and thereby the maintenance costs. In the worst case, a pump failure may lead to a process shutdown accruing additional costs. Nowadays, centrifugal pumps are often controlled by adjusting their rotational speed, which affects the resulting flow rate and output pressure of the pumped fluid. Typically, the speed control is realised with a frequency converter that allows the control of the rotational speed of an induction motor. Since a frequency converter can estimate the motor rotational speed and shaft torque without external measurement sensors on the motor shaft, it also allows the development and use of sensorless methods for the estimation of the pump operation. Still today, the monitoring of pump operation is based on additional measurements and visual check-ups, which may not be applicable to determine the energy efficiency of the pump operation. This doctoral thesis concentrates on the methods that allow the use of a frequency converter as a monitoring and analysis device for a centrifugal pump. Firstly, the determination of energy-efficiency- and reliability-based limits for the recommendable operating region of a variable-speed-driven centrifugal pump is discussed with a case study for the laboratory pumping system. Then, three model-based estimation methods for the pump operating location are studied, and their accuracy is determined by laboratory tests. In addition, a novel method to detect the occurrence of cavitation or flow recirculation in a centrifugal pump by a frequency converter is introduced. Its sensitivity compared with known cavitation detection methods is evaluated, and its applicability is verified by laboratory measurements for three different pumps and by using two different frequency converters. The main focus of this thesis is on the radial flow end-suction centrifugal pumps, but the studied methods can also be feasible with mixed and axial flow centrifugal pumps, if allowed by their characteristics.

The analysis and mitigation of risks in FMCG supply chain: the case of British American Tobacco Eastern Europe

This work investigates the Bullwhip Effect, which is one of the most important phenomena in contemporary supply chain management. The author uses most recent theoretical apparatus to analyze operational activities of a leading FMCG company British American Tobacco Eastern Europe. This paper investigates and describes the process in BAT supply chain management and considers the impact of the Bullwhip Effect together with the potential risks threatening company's operations. Emergence of the Bullwhip Effect leads to supply chain inefficiency. This paper contains methodological supply chain risk mitigation recommendations, description of a real case study and an analytical study of internal and external supply chain processes

Markkina- ja sääntelyhäiriöt taloudellisen tehottomuuden aiheuttajina

Tutkielmassa käsitellään markkina- ja sääntelyhäiriötä ja keskitytään selittämään, millä tavoin nämä häiriöt aiheuttavat taloudellista tehottomuutta. Lisäksi työssä osoitetaan markkina- ja sääntelyhäiriöiden välinen yhteys ja selitetään, kuinka markkina- ja sääntelyhäiriöiden ilmenemistä voitaisiin vähentää.

Combination of pulsed corona discharge with TiO2 photocatalysis: verification of hypothesis

The oxidation potential of pulsed corona discharge concerning aqueous impurities is limited in respect to certain refractory compounds. This may be enhanced in combination of the discharge with catalysis/photocatalysis as developed in homogeneous gas-phase reactions. The objective of the work consists of testing the hypothesis of oxidation potential enhancement in combination of the discharge with TiO2 photocatalysis applied to aqueous solutions of refractory oxalate. Meglumine acridone acetate was included for meeting the practical needs. The experimental research was undertaken into oxidation of aqueous solutions under conditions of various target pollutant concentrations, pH and the pulse repetition rate with plain electrodes and the electrodes with TiO2 attached to their surface. The results showed no positive influence of the photocatalyst, the pollutants were oxidized with the rate identical within the accuracy of measurements. The possible explanation for the observed inefficiency may include low UV irradiance, screening effect of water and generally low oxidation rate in photocatalytic reactions. Further studies might include combination of electric discharge with ozone decomposition/radical formation catalysts.

Development of sales invoicing process in industrial services

The objective of this Master’s thesis is to find ways to streamline the invoicing process of the case company. In order to streamline the process, the bottlenecks and development areas of the present invoicing process needs to be identified. The bottlenecks are based on interviews made to personnel. The thesis also offers solutions to overcome the identified bottlenecks. The problem is the slowness of the invoicing process which should get rid off. The slow invoicing process causes delays in obtaining payments. There are many reasons for the slowness and inefficiency of the invoicing process. One of the biggest reasons is that the information systems are not deployed entirely. It causes additional work for everyone. Practices with the customers affect also to the smooth flow of invoicing. The contracts determine when the customer can be invoiced but also work approvals, missing work orders and customer’s own invoicing basis slow the process. The fastest and cheapest solution is to deploy the systems better and do things correctly. Thus duplicated work would decrease and resources would be saved. The work allocation should be modified and the practices with customer should be influenced too. In the future the meaning of IT should be highlighted and new devices exploited.

Crowdfunding as a new funding alternative for early stage start-ups

Attracting outside capital is a common problem for start-up companies. Capital markets define the funding options for companies and firms which suffer the most from these capital market imperfections are small start-up companies. Therefore it is important to study any new funding model which can offer a new solution to this inefficiency of capital markets. This study explains the traditional funding models for start-ups such as founders, friends & family, banks, business angels and venture capitalist. After giving background to traditional start-up funding this study delves into crowfunding (CF) and introduces it as a new funding method. The objective of the thesis is to answer one broad research question: Why and how should start-up companies use CF as an alternative funding method? To properly delve into this, this question has the following sub-questions: What kind of funding alternatives do start-up companies have? What are the pros and cons of CF compared to other funding options? How can start-ups benefit from CF? This study gives background on the rise of CF and the reasons why this new model is needed. Author will explain the different components of CF such as platforms, crowdfunders and projects. Also benefits and challenges of the crowdfunding model are investigated. As a new funding model CF has had to clear out many obstacles from its way. These are, for example, legal and regulatory issues as well education of crowd investors to understand this new investment option. . Start-up entrepreneurs can gain valuable insight from this study. The author has attempted to form best practices and guidelines of how to operate in the CF environment. This study was conducted by performing expert interviews, collecting data from previous studies and performing a content analysis of successful crowdfunding cases. Main findings from the study were that CF has huge potential in funding entrepreneurial projects. It is still a niche way for funding but growing rapidly. CF is earning its place among traditional funding options and has potential to fund projects which otherwise would struggle to find funding. With CF entrepreneur can tap into geographically diverse audience. It is a powerful validation tool for products and ideas and has the power to bring democratic elements to entrepreneurial funding.

PHC Production Management System Based on RFID

At present, in large precast concrete enterprises, the management over precast concrete component has been chaotic. Most enterprises take labor-intensive manual input method, which is time consuming and laborious, and error-prone. Some other slightly better enterprises choose to manage through bar-code or printing serial number manually. However, on one hand, this is also labor-intensive, on the other hand, this method is limited by external environment, making the serial number blur or even lost, and also causes a big problem on production traceability and quality accountability. Therefore, to realize the enterprise’s own rapid development and cater to the needs of the time, to achieve the automated production management has been a big problem for a modern enterprise. In order to solve the problem, inefficiency in production and traceability of the products, this thesis try to introduce RFID technology into the production of PHC tubular pile. By designing a production management system of precast concrete components, the enterprise will achieve the control of the entire production process, and realize the informatization of enterprise production management. RFID technology has been widely used in many fields like entrance control, charge management, logistics and so on. RFID technology will adopt passive RFID tag, which is waterproof, shockproof, anti-interference, so it’s suitable for the actual working environment. The tag will be bound to the precast component steel cage (the structure of the PHC tubular pile before the concrete placement), which means each PHC tubular pile will have a unique ID number. Then according to the production procedure, the precast component will be performed with a series of actions, put the steel cage into the mold, mold clamping, pouring concrete (feed), stretching, centrifugalizing, maintenance, mold removing, welding splice. In every session of the procedure, the information of the precast components can be read through a RFID reader. Using a portable smart device connected to the database, the user can check, inquire and management the production information conveniently. Also, the system can trace the production parameter and the person in charge, realize the traceability of the information. This system can overcome the disadvantages in precast components manufacturers, like inefficiency, error-prone, time consuming, labor intensity, low information relevance and so on. This system can help to improve the production management efficiency, and can produce a good economic and social benefits, so, this system has a certain practical value.