Letters from the War of Ecosystems – An Analysis of Independent Software Vendors in Mobile Application Marketplaces

The recent emergence of a new generation of mobile application marketplaces has changed the business in the mobile ecosystems. The marketplaces have gathered over a million applications by hundreds of thousands of application developers and publishers. Thus, software ecosystems—consisting of developers, consumers and the orchestrator—have emerged as a part of the mobile ecosystem. This dissertation addresses the new challenges faced by mobile application developers in the new ecosystems through empirical methods. By using the theories of two-sided markets and business ecosystems as the basis, the thesis assesses monetization and value creation in the market as well as the impact of electronic Word-of-Mouth (eWOM) and developer multihoming— i. e. contributing for more than one platform—in the ecosystems. The data for the study was collected with web crawling from the three biggest marketplaces: Apple App Store, Google Play and Windows Phone Store. The dissertation consists of six individual articles. The results of the studies show a gap in monetization among the studied applications, while a majority of applications are produced by small or micro-enterprises. The study finds only weak support for the impact of eWOM on the sales of an application in the studied ecosystem. Finally, the study reveals a clear difference in the multi-homing rates between the top application developers and the rest. This has, as discussed in the thesis, an impact on the future market analyses—it seems that the smart device market can sustain several parallel application marketplaces.

Essays on Innovativeness and its Evaluation in Small and Medium-sized Enterprises

Tutkimus koostuu neljästä artikkelista, jotka käsittelevät suomalaisten pienten ja keskisuurten teollisuusyritysten (PKT-yritysten) innovatiivisuutta, sen attribuutteja (ominaispiirteitä) sekä indikaattoreita. Tutkimuksessa tarkastellaan sekä kirjallisuudessa esitettyjä että PKT-johtajien ja PKT-yritystenkehityshankkeiden rahoituspäätöksiin osallistuvien yritystutkijoiden haastatteluissa esittämiä innovatiivisuuden määritelmiä. Innovatiivisuusindikaattoreista tarkastellaan PKT-yritysten kehittämishankkeille sovellettavia rahoitus- ja arviointikriteerejä sekä yritysten ulkopuolisten rahoittajien että PKT-johtajien näkökulmasta. Erityistä huomiota kohdistetaan sovellettuihin laadullisiin ja ei-numeerisiin innovatiivisuuden arviointikriteereihin. Sekä kirjallisuudessa että kymmenen yritystutkijan ja kuuden esimerkkiyrityksen johtajan haastatteluissa innovaation uutuus yhdistetään innovatiivisuuteen. Muita tärkeitä innovatiivisuuteen liitettyjä ominaisuuksia olivat markkinat, muista yrityksistä erottuminen ja yksilöiden luovuus. Ihmisläheiset ja yksilöihin liittyvät näkökulmat korostuvat yritystutkijoiden ja PKT-johtajien innovatiivisuuden määritelmissä, kun taas kirjallisuudessa annetaan enemmän painoa ympäristölle, tuotteille ja markkinoille. Yritystutkijat pitivät yritykseen ja sen johtajaan liittyviä tekijöitä tärkeinä rahoitettavien kehittämishankkeiden panosten arviointikriteereinä. Tuotteiden kaupallinen menestys oli rahoittajan kannalta tärkein tulostekijä. Tarkastelluissa esimerkkiyrityksissä kehityshankkeista päättäminen ja hankkeiden arviointi on toisaalta intuitiivista ja saattaa olla tiedostamatontakin, koska yritysten kehittämistoiminta on vähäistä. Pienyritysten johtajat korostavat arvioinnissa rahallisiamittareita, vaikka sekä numeerisia että laadullisia kriteereitä sovelletaan. Todennäköisin syy tälle on pienyritysten rajalliset taloudelliset voimavarat. Toinen mahdollinen syy rahoituksellisten tekijöiden painottamiseen on, että tämän päivän ihannejohtaja ymmärretään analyyttiseksi ja mm.rahavirtoja valvovaksi. Kuitenkin innovatiiviset yritysjohtajat pitävät innovaatioiden luomista yhtenä elämän hauskoista puolista. Innovatiiviset esimerkkiyritykset ovat tulevaisuuteen ja kasvuun suuntautuneita strategisella tasolla. Operationaalisella tasolla ne tuottavat keksintöjä ja innovaatioita. Patentteja tarkastelluilla yrityksillä on kuitenkin vähän. Sekä innovatiiviset että vähemmän innovatiiviset esimerkkiyritykset ovat voimakkaasti asiakassuuntautuneita ja erikoistuneita tiettyihin tuotteisiin ja asiakkaisiin. Asiakkaiden tarpeita tyydytetään kehittämällä niitä vastaavia tuotteita. Tästä johtuu, että valtaosa yritysten kehittämistoiminnasta kohdistuu tuotteisiin tai tuotantoon.

International Growth Strategies of Small and Medium-Sized Enterprises in Infocom Sector

Tutkimuksen päätavoite on selvitää infocom-toimialan pk-yritysten kansainväliset kasvustrategiat. Aluksi on tarkasteltu kasvua edesauttaneita ja hidastaneita tekijöitä, jotka muodostavat pohjan kansainvälisen kasvun suunnittelulle. Näiden pohjalta on aikaisemmin esitettyihin teoriamalleihin ja yritysten kansainvälistymisen asteeseen yhdistettynä määritelty infocom-toimialan pk-yrityksten kansainväliset kasvustrategiavaihtoehdot. Tutkimuksen tarkasteluun on vaikuttanut born global-ilmiö, jonka pääpiirre on nopea kansainvälistyminen yrityksen aikaisessa kehitysvaiheessa. Työn empiirisessä osassa on havainnollistettu teoriassa käsiteltyjä kansainväliseen kasvuun liittyviä tekijöitä. Empiirisessä osassa on käytetty sekä kvantitatiivisia että kvalitatiivisia menetelmiä. Kvantitatiivinen survey tutkimus on pohjautunut aineistoon, joka on kerätty vuosina 1999-2000 Telecom Business Research Centerissä Lappeenrannassa. Kvalitatiivisessa case-tutkimuksessa on haastateltu infocom-toimialan pk-yrityksiä. Nopeasti kehittyvän infocom-toimialan pk-yrityksille kansainvälistyminen on haaste ja tärkein menestyksen edellytys. Pk-yritysten kasvuresurssit ovat rajalliset, mutta lisääntyvän verkostoitumisen myötä on yritysten välisestä yhteistyöstä saavutettu etuja, jotka ovat mahdollistaneet kansainvälisen kasvun. Markkinoiden muutosnopeus on suuri ja siksi strategisen suunnittelun aikaväli lyhenee. Kansainvälisiä kasvustrategioita muodostettaessa yritykset joutuvat samanaikaisesti turvautumaan useampaan eri kasvustrategiaan, joiden yhdistelmänä yritysten merkittävimmäksi kasvustrategiaksi muodostuvat hybridit kasvustrategiat.

Nature experiences to the enterprises-Case Etela-Savo

This thesis examines the experience travelling and incentive travelling in the area of Etela-Savo. The incentive travels have become more popular in the recent years. The enterprises and companies have started to reward their staff for efficiency by giving them experience travels instead of money rewards. The staff needs refreshing because of the development of work technology and because of physical and mental demands of the work. Short experience travels with activities give motivation and refresh the staff. There were two target groups in this thesis: entrepreneurs which produce the experiences and the staffs which have proved them. With the help of these target groups experience products, activities and travelling possibilities were studied and also how the experiences had been felt and where they had been acquired from. There are theoretical and empirical parts in this thesis. The research methodology was mainly idiographical and also qualitative and quantitative research methods were used. The empirical information was collected with the help of a questionnaire and a theme interview. The result of the study was that the area's travelling attractions, which are the nature, hundreds of lakes, large forests and the beautiful landscape give good possibilities to experience travelling and incentive travelling. The experience must contain a physical, social and mental element. A good experience activity must also contain some actions in the nature, light physical exercise and a possibility to the customer to take part in action. The experience feeling was felt as an unique happening and enjoyment, which will help the customers managing in their work, removing stress and developing team working skills. The experience was caused by the contrast between work/everyday life and the happening, and by succeeding in the activity in addition they felt a very strong community spirit in the experience feeling. Women received the experience feeling much more strongly than men. There were also differences in feelings between ages.

Corporate Social and Regional Responsibility - The View of Small and Medium-sized Enterprises

The objective of this research was to understand and describe what corpo-rate social and regional responsibility is in SMEs and define the meaning of these concepts to the community and region. Corporate social respon-sibility (CSR) creates a basis for regional responsibility. Regional respon-sibility is a new concept and this research examines it from SMEs’ view-point. This is a theoretical research and the aim is to create a theoretical framework of SMEs’ corporate social and regional responsibility. This framework supports the future research on the subject. The research results show that CSR of SMEs is practical, informal and dependent on the scarce resources of SMEs. CSR is a complex and deep concept and SMEs have their own way of interpreting it. It can be stated that CSR-practises in SMEs are closely connected to employment, envi-ronment, community and supply chain. The challenge is to find motivation to socially and regionally responsible behaviour in SMEs. Benefiting from responsible behaviour and the attitude of SME’s owner-manager are the key reasons for SMEs to involve in CSR and regional responsibility. The benefits of this involvement are for example improved image, reputation and market position. CSR can also be used in SMEs as risk management tool and in cost reduction. This study indicates also that creation of strate-gic partnerships, local government participation, a proper legal system and financial support are the basic issues which support CSR of SMEs. This research showed that regional responsibility of SMEs includes active participation in regional strategy processes, L&RED initiatives and regional philanthropy. For SMEs regional responsibility means good relationships with the community and other related stakeholders, involvement in L&RED initiatives and acting responsibly towards the operating environment. In SMEs’ case this means that they need to understand the benefits of this kind of involvement in order to take action and participate. As regional responsibility includes the relationships between firm and the community, it can be stated that regional responsibility extends CSR’s view of stakeholders and emphasises both, the regional stakeholders and public-private partnerships. Community engagement and responsible be-haviour towards community can be seen as a part of SMEs’ social and regional responsibility. This study indicates that social and regional re-sponsibility of SMEs have a significant influence on the community and region where they are located. Better local and regional relationships with regional and community actors are the positive impacts of social and re-gional responsibility of SMEs. Socially and regionally responsible behav-iour creates a more positive environment and deepens the involvement of SMEs to community and L&RED initiatives.

Russian Enterprise Restructuring - the Effect of Privatisation and Market Liberalisation on the Performance of Large Enterprises

The fundamental question in the transitional economies of the former Eastern Europe and Soviet Union has been whether privatisation and market liberalisation have had an effect on the performance of former state-owned enterprises. This study examines the effect of privatisation, capital market discipline, price liberalisation and international price exposure on the restructuring of large Russian enterprises. The performance indicators are sales, profitability, labour productivity and stock market valuations. The results do not show performance differences between state-owned and privatised enterprises. On the other hand, the expansion of the de novo private sector has been strong. New enterprises have significantly higher sales growth, profitability and labour productivity. However, the results indicate a diminishing effect of ownership. The international stock market listing has a significant positive effect on profitability, while the effect of domestic stock market listing is insignificant. The international price exposure has a significant positive increasing effect on profitability and labour productivity. International enterprises have higher profitability only when operating on price liberalised markets, however. The main results of the study are strong evidence on the positive effects of international linkages on the enterprise restructuring and the higher than expected role of new enterprises in the Russian economy.

Purchasing and supply management capabilities in Finnish medium-sized enterprises

Purchasing and supply management (PSM) has become increasingly important for companies to survive in current highly competitive market. Increased outsourcing has extended the role of PSM, making external resource management and supplier relationships critical success factors in business. However, the recent research has mainly concentrated on large enterprises. Therefore the PSM issues related to medium-sized enterprises represent a significant research area. The thesis aims to explore the status and role of PSM in Finnish medium-sized firms, understand how strategic companies consider PSM to be, clarify what are the competence requirements for PSM professionals, and increase the understanding of PSM capabilities needed from the points view of individual competence and organisational capabilities. The study uses data that was collected in 2007 from purchasing executives at the director/CEO level representing a sample of 94 Finnish firms. 54 % of the respondent enterprises had a supply strategy. The total supply cost was on average 60 % of firms' turnover. Centralisation of PSM and outsourcing of logistics will increase in Finnish medium-sized enterprises. The findings point out that Finnish medium-sized enterprises had strategical features of PSM. However, Finnish firms have not concentrated on making strategies that relate to PSM. The elements that explain the existence of a supply strategy could be found in this study. It can be concluded from this study that there is an advantageous base for the development of strategic PSM, because nearly all the enterprises were of the opinion that PSM capabilities have an effect on business success. When reviewing the organisational capabilities, the five most important development elements were supplier relationships, both operational and strategic processes, time management, and personnel's competence. Training in internationalisation, strategic management, and communication could help to improve competences of PSM personnel.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

Alternative Energy Conversion Systems for a Micro Scale Wind Turbine

This Master's thesis deals with a Micro Scale Wind Wind Turbine application. The thesis consists of nine chapters. The first chapter is an introduction to the philosophy of a small scale wind turbine application. The second defines concepts, and lists the requirements. The third presents the whole application for an On-Grid , and for an Off-Grid arrangement, with main concentration on lighting, heating, and energy storage. The fourth deals with the Inverter's technology, which are used for the conversion of the produced power. The fifth chapter presents the available storage technology and it's possibilities. The sixth deals with the system, and the technological means used for the implementation. The seventh presents the PLC device, which was used as the controller for the management of the whole application. The eighth deals with the concept and the control application philosophy that the PLC involves. And the final chapter presents conclusions and ideas for further considerations.

The Current Situation of Sewage Sludge and Manure Treatment in Livestock Enterprises in the Leningrad Region

The problem concerning livestock waste handling in the Leningrad region has been subjected to a number of research works. However, the requirements for use of manure and sewage sludge as well as for treatment processes are not certain. So, this problem remains relevant and, therefore, further investigation ought to be made. Currently a large amount of sewage sludge and manure is generated in the Leningrad region. These livestock wastes have to be obligatory treated. The most common methods for treatment in the region, such as anaerobic digestion, composting and aging as well as the most potential methods are described in the thesis. The most potential methods for the Leningrad region are anaerobic digestion, composting and combustion. Each method has strengths and weaknesses, which are also considered in the paper. Aging was not considered as potential treatment method because it does not meet the sanitary and epidemiological requirements. Furthermore, the work gives an overview and comparison of Finnish and Russian legislative and normative acts concerning livestock wastes handling. On the whole the requirements of the Russian Federation concerning sewage sludge and manure are not much different from the Finnish ones.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Mental Health of Expatriates in Finnish Enterprises in Brazil

Expatriation has become increasingly common due to the global trade expansion. Many large companies base their production facilities in far-flung countries, where experts are sent from their own countries to launch the operations. Working in a foreign environment demands from so-called expatriates considerable adaptability. This study aimed to investigate if following expatriation mental health difficulties were experienced by the employees themselves or their family members. This study investigated by a questionnaire and interviews how expatriate employees in Finnish companies operating in different regions of Brazil and their families adjusted. Investigated employees were required to be at least 6 months in expatriation. Data were collected in Brazil during their stay at least 3 months after the arrival. The survey covered 121 expatriate employees, that operated in 17 different companies, from which 71 employees from 10 different companies responded to the questionnaire. All the employees from the two largest enterprises and their spouses were invited to focus groups; in total 43 persons (22 employees and 21 employees’ spouses) participated in a group or individual interviews. No significant mental health difficulties were found among the expatriate employees. Only a tenth of the expatriate employees reported strain. The experience of strain symptoms was found to be related to long working days, intense working rhythm and lack of friends. Work satisfaction seemed to be an important mediator in the coping process. While abroad, the expatriate employees were highly recognized for their work. Due to the immature organization of work they could often use their creative capacities to improve the work flow. The opportunity to see the effects of their own contribution with their own eyes to the development of the enterprise made them feel good. The association between the expatriate employees’ adjustment and that of their spouses’ was evident. The spouses’ situation was markedly different than that of the expatriate employees’ themselves. Expatriation changed the family members’ previous division of tasks considerably. The expatriate spouses had to change their roles more than the expatriate employees themselves; since most of them were highly educated women, who were leaded through an identity crisis due to at least temporary renunciation of own work and career.

Mikroyrittäjä ja yrityksen kasvu

Tämän tutkimuksen tarkoituksena on selvittää mitkä tekijät ovat mikroyrityksen kasvun edellytyksenä ja mitkä tekijät ovat kasvun esteinä. Tutkimuksen taustalla on mikroyritysten yleisesti vähäinen kasvuhalukkuus. Tässä tutkimuksessa yrittäjien kasvuaikomuksia tarkastellaan kasvun prosessimalliin tukeutuen ja mikroyritysten kasvuun vaikuttavia tekijöitä tarkastellaan Perrenin mikroyrityksen kasvuun vaikuttavien tekijöiden mallin avulla. Tutkimuksessa on käytetty kvalitatiivista tutkimusmenetelmää. Tutkimus on toteutettu haastattelututkimuksena, jossa on haastateltu mikroyrittäjiä Päijät-Hämeessä Lahden ja Hollolan alueilla. Tämän tutkimuksen mukaan mikroyritysten kasvuun vaikuttavat yrittäjän tahtotila ja kyky yrityksen kehittämiseen sekä yrittäjän riskinottokyky että suotuisat ympäristölliset olosuhteet. Näiden tekijöiden puuttuminen estää kasvun. Yrityksen kasvua estäviä muita tekijöitä ovat tutkimuksen mukaan mikroyritysten liiallinen paikallisuus, yhteistyön vähäisyys sekä yrittäjän liiallinen kietoutuminen liiketoimintaan että toiminnan liian vähäinen strateginen suunnittelu.

On Doing Successful ICT Business with Russian Manufacturing Enterprises

This Master’s thesis addresses different approaches using which a foreign IT company could enter Russian manufacturing industry with its enterprise information systems and IT services. In order to define the most suitable market entry approach, several aspects related to Russian manufacturing enterprises are studied. These aspects include challenges of doing ICT business with the previously mentioned enterprises, their perception of ICT role and their ICT preferences, as well as their buying behavior related to acquisition of information systems (IS). The study results show that there are several challenges that can be faced by a foreign IT vendor when starting conducting ICT business with Russian manufacturing enterprises. The results also show that Russian manufacturing industry is still rather immature in sense of business process automation, and its IT buying behavior is rather specific and complicated. The results suggest that an efficient way to approach these enterprises is through a network of trusted partners that consists of reliable Russian IS integrators and business consultants having established connections to Russian manufacturing companies and possessing the needed competence.

Challenges of business process automation for small and medium enterprises

The aim of the study was to examine problems that small and medium enterprises are facing during the implementation of business process automation projects. Study reveals problems from the point of view of companies who are implementing automation projects and from the point of view of IT-integrators who are specifying in IT solutions for small and medium companies.