Public and Private Sector Decision Makers Within the Rail Baltica Growth Corridor

Transport volumes have increased and will continue to increase in European Union. Even though the growth has not been equal between different transport modes. Most of the growth has been faced on road transport. European Union aims to balance the unbalanced market shares between the modes by gaining and supporting the competitiveness of railway and waterway transport. In EU railway transportation is seen as solution to increase safety in traffic and decrease the environmental impacts of transportation. The aim of this research is to figure out how it is possible to decrease the environmental impacts by the technology already in use. Main focus of this research is in intermodality and combining the road and railway transportation. This study aims also to figure out demands and expectations towards new Rail Baltica railway route connecting Tallinn and Berlin. The research is conducted by performing a literature review about decreasing environmental impacts and combining road and rail transport. Another viewpoint is taken from the possible effects of tourism to the passenger transport on rails. Knowledge gained by literature review is deepened by additional internet questionnaire study and expert interview study. In decreasing the environmental impacts of transportation electric trains are definitely the best option providing that the electricity is generated from renewable or carbon dioxide free sources. Decrease of environmental impacts has been reached also with acceptance of larger road transport vehicles. According to interviewed passenger transport experts, the whole route from Tallinn to Berlin may not be convenient to be used in passenger transport, just because the route is too long.. In EU freight is transported mainly with semi-trailer combinations, and that is why it could be logical if huckepack trains would be used on Rail Baltica. Huckepack train allows semi-trailers to be transported on rails with time efficient loading-unloading process. Overall, Rail Baltica project is experienced as a future-oriented one and new railway alignment is seen as great alternative option for transport modes using fossil fuels.

Towards a contextual understanding of B2B salespeople's selling competencies – An exploratory study among purchasing decision-makers of internationally-oriented technology firms

ABSTRACT Towards a contextual understanding of B2B salespeople’s selling competencies − an exploratory study among purchasing decision-makers of internationally-oriented technology firms The characteristics of modern selling can be classified as follows: customer retention and loyalty targets, database and knowledge management, customer relationship management, marketing activities, problem solving and system selling, and satisfying needs and creating value. For salespeople to be successful in this environment, they need a wide range of competencies. Salespeople’s selling skills are well documented in seller side literature through quantitative methods, but the knowledge, skills and competencies from the buyer’s perspective are under-researched. The existing research on selling competencies should be broadened and updated through a qualitative research perspective due to the dynamic nature and the contextual dependence of selling competencies. The purpose of the study is to increase understanding of the professional salesperson’s selling competencies from the industrial purchasing decision- makers’ viewpoint within the relationship selling context. In this study, competencies are defined as sales-related knowledge and skills. The scope of the study includes goods, materials and services managed by a company’s purchasing function and used by an organization on a daily basis. The abductive approach and ‘systematic combining’ have been applied as a research strategy. In this research, data were generated through semi- structured, person-to-person interviews and open-ended questions. The study was conducted among purchasing decision-makers in the technology industry in Finland. The branches consisted of the electronics and electro-technical industries and the mechanical engineering and metals industries. A total of 30 companies and one purchasing decision-maker from each company were purposively chosen for the sampling. The sample covers different company sizes based on their revenues, their differing structures – varying from public to family companies –that represent domestic and international ownerships. Before analyzing the data, they were organized by the purchasing orientations of the buyers: the buying, procurement or supply management orientation. Thematic analysis was chosen as the analysis method. After analyzing the data, the results were contrasted with the theory. There was a continuous interaction between the empirical data and the theory. Based on the findings, a total of 19 major knowledge and skills were identified from the buyers’ perspective. The specific knowledge and skills from the viewpoint of customers’ prevalent purchasing orientations were divided into two categories, generic and contextual. The generic knowledge and skills apply to all purchasing orientations, and the contextual knowledge and skills depend on customers’ prevalent purchasing orientations. Generic knowledge and skills relate to price setting, negotiation, communication and interaction skills, while contextual ones relate to knowledge brokering, ability to present solutions and relationship skills. Buying-oriented buyers value salespeople who are ‘action oriented experts, however at a bit of an arm’s length’, procurement buyers value salespeople who are ‘experts deeply dedicated to the customer and fostering the relationship’ and supply management buyers value salespeople who are ‘corporate-oriented experts’. In addition, the buyer’s perceptions on knowledge and selling skills differ from the seller’s ones. The buyer side emphasizes managing the subject matter, consisting of the expertise, understanding the customers’ business and needs, creating a customized solution and creating value, reliability and an ability to build long-term relationships, while the seller side emphasizes communica- tion, interaction and salesmanship skills. The study integrates the selling skills of the current three-component model− technical knowledge, salesmanship skills, interpersonal skills− and relationship skills and purchasing orientations, into a selling competency model. The findings deepen and update the content of these knowledges and skills in the B2B setting and create new insights into them from the buyer’s perspective, and thus the study increases contextual understanding of selling competencies. It generates new knowledge of the salesperson’s competencies for the relationship selling and personal selling and sales management literature. It also adds knowledge of the buying orientations to the buying behavior literature. The findings challenge sales management to perceive salespeople’s selling skills both from a contingency and competence perspective. The study has several managerial implications: it increases understanding of what the critical selling knowledge and skills from the buyer’s point of view are, understanding of how salespeople effectively implement the relationship marketing concept, sales management’s knowledge of how to manage the sales process more effectively and efficiently, and the knowledge of how sales management should develop a salesperson’s selling competencies when managing and developing the sales force. Keywords: selling competencies, knowledge, selling skills, relationship skills, purchasing orientations, B2B selling, abductive approach, technology firms

Matka serkamolaiseen teatteriin : kohti sanatonta kerrontaa

A travelogue to serkamoan theater deals, just like its name implies, with the molding process of one theater opinion. It has been influenced by both Aristotle's poetry and Bertold Brecht's epic theater. Side by side with theater goes dance, whose development the thesis also considers briefly. Of today's theater makers, Päivi Ketonen (playback theater), Juha Hurme and Nigel Charnock (dance theater) have had a definitive impact on the Serkamoan theater view. Their relation to theater and dance is clarified in the interviews conducted by the writer, which can be found in their entirety among the appendices of this thesis. Serkamoan theater has also been influenced by the writer's studies in Portuguese theater school in 2004. In Portugal the writer had a chance to work a theater piece in a new cultural environment where, for example, a novel and paintings were used as inspiration. The strongest legacy from Portugal however was the desire to do theater that can be understood without words. Serkamoan theater considers the combinations of theater and dance in performing arts, agreeing with, among others, Pina Bausch's footsteps. Serkamoan theater ladles its inspiration from theater, dance, human being, human body and movement. It is theater that cannot be understood through intellect but through the heart.

New directions in Stochastic Multicriteria Acceptability Analysis

Decisions taken in modern organizations are often multi-dimensional, involving multiple decision makers and several criteria measured on different scales. Multiple Criteria Decision Making (MCDM) methods are designed to analyze and to give recommendations in this kind of situations. Among the numerous MCDM methods, two large families of methods are the multi-attribute utility theory based methods and the outranking methods. Traditionally both method families require exact values for technical parameters and criteria measurements, as well as for preferences expressed as weights. Often it is hard, if not impossible, to obtain exact values. Stochastic Multicriteria Acceptability Analysis (SMAA) is a family of methods designed to help in this type of situations where exact values are not available. Different variants of SMAA allow handling all types of MCDM problems. They support defining the model through uncertain, imprecise, or completely missing values. The methods are based on simulation that is applied to obtain descriptive indices characterizing the problem. In this thesis we present new advances in the SMAA methodology. We present and analyze algorithms for the SMAA-2 method and its extension to handle ordinal preferences. We then present an application of SMAA-2 to an area where MCDM models have not been applied before: planning elevator groups for high-rise buildings. Following this, we introduce two new methods to the family: SMAA-TRI that extends ELECTRE TRI for sorting problems with uncertain parameter values, and SMAA-III that extends ELECTRE III in a similar way. An efficient software implementing these two methods has been developed in conjunction with this work, and is briefly presented in this thesis. The thesis is closed with a comprehensive survey of SMAA methodology including a definition of a unified framework.

Ryhmätyömenetelmät logistiikan strategisessa päätöksenteossa

Työ käsittelee strategisen päätöksenteon menetelmiä sekä ryhmien päätöksentekoprosessin tukemista ja organisointia. Lähtökohtana työssä oli tarve kehittää konkreettisia menetelmiä ja tekniikoitalogistiikan strategisten päätöksentekoryhmien toiminnan tukemiseksi. Päätavoitteena työssä oli selvittää, mitkä ovat päätöksentekoryhmien suurimmat ongelmat jahaasteet päätöksentekoprosessin eri vaiheissa. Tämän pohjalta tavoitteena oli ideoida, kuinka päätöksentekoryhmiä ja niiden toimintaa noissa haasteissa voidaanparhaiten tukea erilaisten apumenetelmien ja tekniikoiden avulla. Kirjallisuuskatsauksessa perehdytään strategisten päätösten luokittelutapoihin, päätöksentekoprosessin luonteeseen, ryhmätyöskentelyn merkitykseen päätöksenteossa sekä erilaisiin ryhmäpäätöksentekotekniikoihin. Näiden pohjalta työssä on mietitty, missä asioissa ja päätöksentekoprosessin vaiheissa ryhmät kaipaavat eniten tukea ja mihin olemassa olevilla tekniikoilla ja menetelmillä ei ole pystytty täysin vastaamaan. Näihin avoimiin alueisiin työssä on pyritty kehittämään menetelmiä ja tekniikoita. Menetelmät antavat tukea erityisesti päätöksentekoprosessin vaiheistamiseen, oikeiden asioiden esille nostamiseen sekä keskustelun ja ryhmän muun toiminnan organisointiin. Työssä on esitelty myös muutama mielenkiintoinen ja lupaavajatkotutkimuskohde aihealueelta.

Hinnoittelu yrityksen kannattavuuden kehittämisessä

Diplomityössä tutkittiin hinnoittelun merkitystä yrityksen kannattavuuden kehittämisessä. Työn teoriaosassa selvitettiin pöytätutkimuksena hinnoittelun ja kannattavuuden keskeiset tekijät Lifetime Oy:n liiketoiminnan kannalta. Kilpailukykyisen liiketoiminnan kehittämiseksi suoritettiin markkinatutkimuskysely 1857 yrityksen päättäjälle. Saatujen tulosten perusteella(N=132) Lifetime Oy:n Liiketoimintamallit jaoteltiin (B-to-C), (SOT), ja (B-to-B) Liiketoimintamalleihin, brandeihin, kanaviin, ja asiakassegmentteihin. Diplomityön empiriaosuuden muodostivat markkinointitutkimussekä kauppakeskushankkeet Lifetime Value ShopTM 2007 Edition, ja pieniomenaTM.com, sekä näihin liittyvien brandien ja segmenttikohtaisten hinnoittelustrategioiden luominen.

Logistisen päätösprosessinanalysointi

Työn tavoitteena oli teoriakäsitteistön avulla tutkia ja analysoida erästä päätösprosessia. Alussa on selvitetty laajemmin teoriota, jotka liittyvät ongelman käsitteeseen, ongelmanratkaisuun, päätöksentekoon ja päätöksentekijöihin sekä päätöksentekoprosessien erilaisiin prosessimalleihin. Lopussa näitä teorioita on verrattu tositilanteen ongelmaan ja siihen liittyvään päätöksentekoprosessiin. Ihmiset kohtaavat ongelmatilanteita päivittäin niin työssä kuin henkilökohtaisessakin elämässä. Näiden kaikkien ongelmien ratkaisemiseen liittyy aina päätöksiä.Eri kirjoittajat ovat määritelleet erilaisia päätöksentekoprosessin malleja päätösprosessien vaiheista. Mallien sisällöt vaihtelevat sisällöltään ja vaiheiden lukumääriltään. Myös vaiheiden merkitysten korostamisessa on eroja. Käytännössä näiden päätösprosessimallien ongelmana on niiden vaatima aika. Kun aika on rajallinen, epävarmuus on suuri ja ympäristö on nopeasti muuttuva,kasvaa päätöksentekijän kokemuksen, tiedon ja osaamisen merkitys. Nämä mallit eivät yksiselitteisesti sovi jokaiseen tilanteeseen, vaan niitä mukauttamalla ja yhdistelemällä voidaan löytää kuhunkin tilanteeseen sopiva malli.

Investointiprosessin arviointi ja kehittäminen: tuotannollisten hankkeiden kannattavuus

Työn päätavoitteena on tutkia investointiprosessin toimivuutta. Työssä selvitetään, mitä lisätietoja päätöksentekijät tarvitsevat investointien valinnassa. Työssä tarkastellaan investointien kannattavuuden arviointia, projektien valintaa ja valintaan vaikuttavia tekijöitä. Myös investoinnin toteutuksen jälkeistä tarkkailua tutkitaan. Työ on tehty kohdeyrityksen eri tehtaiden investointikäytäntöjen yhdistämisen avuksi. Työssä tarkastellaan yrityksennykyisiä käytäntöjä ohjeiden, haastattelujen ja tapaustutkimuksen kautta. Tutkimuksen tuloksena selvisi, että investointien arviointikäytäntöjä olisi kehitettävä. Vain suurilta investointiprojekteilta vaaditaan tarkat suunnitelmat ja laskelmat. Nykyisen takaisinmaksuajan menetelmän rinnalle tulisi ottaa käyttöön rahan aika-arvon huomioon ottava menetelmä, kuten sisäisen koron menetelmä. Riskienhallinnassa olisi vielä otettava huomioon kustannuksiin ja markkinoiden muutosherkkyyteen liittyvät riskit. Kun suunnittelu saadaan kuntoon, seuraavana tärkeänä kehittämiskohteena olisi investoinnin jälkeisen tarkkailun lisääminen investointiprosessiin.

Kaivoskoneiden kustannusseurannan ja -raportoinnin kehittäminen

Työn tavoitteena oli kehittää kaivoskoneita valmistavalle yritykselle raportointimalli uusittujen tuotteiden kustannusten seuraamiseksi. Raporttien toivottiin olevan tarvelähtöisiä, sisällöltään luotettavia, vaivattomia päivittää sekä helposti saatavissa. Tutkimuksen toisena tavoitteena oli kartoittaa kohdeyrityksen tuotekohtaisenkustannusseurannan nykytilaa ja sen kehityskohteita. Tutkimuksen aineistoa kerättiin strukturoimattomilla haastatteluilla, yrityksen dokumentteihin tutustumalla, havainnoinnilla, keskusteluilla sekä benchmarking-menetelmällä. Luonteeltaan tutkimus oli konstruktiivinen eli sen tavoitteena oli luoda uusi ratkaisumalliongelmalliseksi koettuun tilanteeseen. Tutkimuksen tuloksena syntyi pitkälle automatisoitu kustannusraportointimalli, joka sisältää kaksi tuotekohtaista kustannusraporttityyppiä. Raportit ovat ns. on-line -raportteja eli käyttäjien on mahdollisuus lukea niitä yrityksen intranetin kautta haluamanaan aikana. Prototyyppiraportit laadittiin erään nykyisen tuoterakenteen mukaisen koneen tiedoilla.Raporttien avulla voidaan tehokkaasti seurata konekohtaisia kustannuksia ja tunnistaa ne tekijät joihin vaikuttamalla voidaan saavuttaa asetetut tavoitekustannukset. Mallissa määriteltiin myös raporttien käyttäjät, jakelu, vastuut ja päivitykset. Todellinen hyöty raportointimallista saadaan siinä vaiheessa, kun sen avulla voidaan seurata uuden tuoterakenteen kustannuksia. Tutkimuksen perusteella annettiin lisäksi suosituksia kohdeyrityksen kustannusseurannan kehittämiseksi tulevaisuudessa.

Varastonhallinnan välineet raaka-ainehankintojen apuna

Tarkoituksena on löytää tutkimuksen kohdeyritykselle toimintatapa raaka- ainehankinnoissa varastoon sitoutuneen pääoman minimoimiseksi tarkastelemalla varastoinnin tunnuslukuja ja syventääyrityksen näkemystä varaston hallinnan laskennallisista työkaluista. Tutkimus on suhtautumiseltaan kartoittava kvalitatiivinen tutkimus, jokaon metodologialtaan case-tutkimus. Teoriaosa on kirjoitettu perustuen aihetta käsitteleviin teoksiin sekä artikkeleihin ja empiriaosaan aineistoa on hankittu teema- ja avointen haastattelujen avulla. Hankinnan ollessa osa yrityksen tärkeimpiä toimintoja tulee kiinnittää huomiota erityisesti pääoman sitoutuneisuuteen. Transaktiomotiivien kauttahankinnan tasot hahmottuvat paremmin päätöksentekijöille. Täsmällisen päästrategiaa tukevan hankintastrategian luominen on ensisijaisen tärkeää, jotta varastonhallinnan osana laskettavia tunnuslukuja voidaan hyödyntää oikealla tavalla voiton maksimoimiseksi ja riittävän palvelutasonylläpitämiseksi. Palvelutason määrittelemiseksi hankintastrategiaa on terävöitettävä, koska maksimaalisen palvelutason ylläpitäminen on tehotonta.

Epävarmuuden haltuunotosta Venäjälle suuntautuvissa hankkeissa - tapaustutkimus

Tämä tutkimus tarkastelee epävarmuutta Venäjälle suuntautuvissa hankkeissa. Tutkimuksessa analysoidaan Venäjän liiketoimintaympäristöön liittyvää epävarmuutta. Tutkimusongelman muodostaa näiden epävarmuuksien haltuunotto Venäjälle suuntautuvissa investoinneissa. Tutkimuksen teoreettisena viitekehyksenä käytetään 1970-luvulta lähtien kehitettyä reaalioptiolähestymistapaa. Tutkimusmenetelmänä käytetään tapaustutkimusta, jossa esimerkkiyritysten tekemiä valintoja pohditaan reaalioptioviitekehyksen lävitse. Tutkimuksen empiirisessä osassa on haastateltu esimerkkiyritysten edustajia sekämuita venäjänkaupan ammattilaisia ja tiedusteltu heidän näkemyksiään markkinoiden kehityksestä ja erityispiirteistä. Reaalioptiolähestymistapaa käytetään apuvälineenä hankkeisiin sisältyvää epävarmuutta jäsenneltäessä ja päätöksentekijöiden kommunikaatiovälineenä päätöstilanteissa. Sen sijaan Venäjälle suuntautuvien hankkeiden (reaalioptioiden) matemaattinen arvottaminen on hankalaa liiketoimintaympäristön ominaispiirteiden vuoksi.

Developing Support for Scenario Process: A Scenario Study on Lappeenranta University of Technology from 2006 to 2016

Epävarmuus ei ole outoa enää julkishallinon alueellakaan. Globalisaation,tietotalous ja muut yksityissektoria ravistelleet ilmiöt ovat lisänneet mielenkiintoa erilaisiin tekniikoihin joilla voidaan lievittää epävarmuudesta aiheutuvia ongelmia. Tämä raportti kuvailee skenaariosuunnittelun käyttöä eräänä mahdollisuutena epävarmuuden hallintaan julkishallinnossa ja yksityissektorilla. Raportti sijoittuu samaan skenaariotutkimuksen jatkumoon edellisten LTY:ssä toteutettujen skenaariotutkimusten kanssa. tutkimus valottaa tutkimuksen ja käytännön työn nykytilaa helposti hyödynnettävässä muodossa. Rapostin kontribuutio on kuvata tutkimukseen perustuva tuettu skenaarioprosessi ja syntyneet skenaariot, keskittyen prosessin tukemiseen eri menetelmin.

International bioenergy trade- scenario study on international biomass market in 2020

The markets of biomass for energy are developing rapidly and becoming more international. A remarkable increase in the use of biomass for energy needs parallel and positive development in several areas, and there will be plenty of challenges to overcome. The main objective of the study was to clarify the alternative future scenarios for the international biomass market until the year 2020, and based on the scenario process, to identify underlying steps needed towards the vital working and sustainable biomass market for energy purposes. Two scenario processes were conducted for this study. The first was carried out with a group of Finnish experts and thesecond involved an international group. A heuristic, semi-structured approach, including the use of preliminary questionnaires as well as manual and computerised group support systems (GSS), was applied in the scenario processes.The scenario processes reinforced the picture of the future of international biomass and bioenergy markets as a complex and multi-layer subject. The scenarios estimated that the biomass market will develop and grow rapidly as well as diversify in the future. The results of the scenario process also opened up new discussion and provided new information and collective views of experts for the purposes of policy makers. An overall view resulting from this scenario analysis are the enormous opportunities relating to the utilisation of biomass as a resource for global energy use in the coming decades. The scenario analysis shows the key issues in the field: global economic growth including the growing need for energy, environmental forces in the global evolution, possibilities of technological development to solve global problems, capabilities of the international community to find solutions for global issues and the complex interdependencies of all these driving forces. The results of the scenario processes provide a starting point for further research analysing the technological and commercial aspects related the scenarios and foreseeing the scales and directions of biomass streams.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Applying the principles of life cycle assessment and costing in process modeling to examine profit-making capability

Static process simulation has traditionally been used to model complex processes for various purposes. However, the use of static processsimulators for the preparation of holistic examinations aiming at improving profit-making capability requires a lot of work because the production of results requires the assessment of the applicability of detailed data which may be irrelevant to the objective. The relevant data for the total assessment gets buried byirrelevant data. Furthermore, the models do not include an examination of the maintenance or risk management, and economic examination is often an extra property added to them which can be performed with a spreadsheet program. A process model applicable to holistic economic examinations has been developed in this work. The model is based on the life cycle profit philosophy developed by Hagberg and Henriksson in 1996. The construction of the model has utilized life cycle assessment and life cycle costing methodologies with a view to developing, above all, a model which would be applicable to the economic examinations of complete wholes and which would require the need for information focusing on aspects essential to the objectives. Life cycle assessment and costing differ from each other in terms of the modeling principles, but the features of bothmethodologies can be used in the development of economic process modeling. Methods applicable to the modeling of complex processes can be examined from the viewpoint of life cycle methodologies, because they involve the collection and management of large corpuses of information and the production of information for the needs of decision-makers as well. The results of the study shows that on the basis of the principles of life cycle modeling, a process model can be created which may be used to produce holistic efficiency examinations on the profit-making capability of the production line, with fewer resources thanwith traditional methods. The calculations of the model are based to the maximum extent on the information system of the factory, which means that the accuracyof the results can be improved by developing information systems so that they can provide the best information for this kind of examinations.