Waste Management in Commercial Activity: State-of-the-Art and the Potential Innovation in the Urban Areas of Hanoi, Vietnam

As the rapid development of the society as well as the lifestyle, the generation of commercial waste is getting more complicated to control. The situation of packaging waste and food waste – the main fractions of commercial waste in different countries in Europe and Asia is analyzed in order to evaluate and suggest necessary improvements for the existing waste management system in the city of Hanoi, Vietnam. From all waste generation sources of the city, a total amount of approximately 4000 tons of mixed waste is transported to the composting facility and the disposal site, which emits a huge amount of 1,6Mt of GHG emission to the environment. Recycling activity is taking place spontaneously by the informal pickers, leads to the difficulty in managing the whole system and uncertainty of the overall data. With a relative calculation, resulting in only approximately 0,17Mt CO2 equivalent emission, incinerator is suggested to be the solution of the problem with overloaded landfill and raising energy demand within the inhabitants.

Motives, Challenges and Success Factors in the Business Partner Network

Tässä työssä käsitellään niitä motiiveja, haasteita ja menestystekijöitä, jotka vaikuttavat lisäarvoatuottavassa liiketoimintaverkostossa. Työssä on selvitetty sitä, miten partneriverkostot syntyvät sekä mitkä seikat vaikuttavat siihen jatkuuko yhteistyö vai ei. Motiiveja partneruuteen on tutkittu kirjallisuudesta sekä analysoimalla työssä esitettyä tapausta. Tässä työssä käydään keskustelua myös partneruuden elinkaaresta, jota ei ole käsitellyssä kirjallisuudessa tuotu esille. Työssä esitettyä tapausta arvioitiin lähettämällä siihen liittyneille henkilöille kysely. Kyselyiden lähettämisen jälkeen järjestettiin haastattelu kyselyyn vastanneiden kanssa. Lopputulokset perustuvat pitkälti haastateltujen henkilöiden kanssa käytyihin keskusteluihin. Kävi ilmi, että arvoa tuottavan partneriverkoston yksi tärkeimpiä tavoitteita on saavuttaa jatkuvuutta liiketoiminnallaan. Ainoastaan pitkäaikaisella partneruudella voidaan saavuttaa merkittäviä etuja markkinoilla. Siksi on tärkeätä, jo partnerin valinnassa, kiinnittää huomiota partneruuden jatkuvuuteen pitkällä tähtäimellä. Liiketoimintaverkostossa partneruudesta syntyvät tuotot ja niiden jakaminen on tärkein yksittäinen osaalue. Oleellista partneruuden jatkuvuudelle pitkällä tähtäimellä on jo partneria valittaessa se, että kyetään arvioimaan miten partneruudesta syntyvät tuotot jaetaan tasapuolisesti ja onko partneruudesta syntyvälle liiketoiminnalle jatkuvuutta. Jotta partneriverkostolle asetetut tavoitteet voitaisiin saavuttaa, on tärkeää suunnitella partneriverkoston hallintaa myös operatiivisella tasolla. Lisäksi tärkeää on jakaa verkostolle asetetut yhteiset tavoitteet organisaatioiden sisällä. Jos ylemmänja operatiivisen tason johdon yhteistyö on riittämätöntä, se vaikeuttaa oleellisesti asetettujen tavoitteiden saavuttamista. Tiedon jakaminen aikaisessa vaiheessa sitouttaa eri sidosryhmät paremmin yhteisiin tavoitteisiin.

Heat Transfer Analysis of the EPR Core Catcher Test Facility Volley

Uusi EPR-reaktorikonsepti on suunniteltu selviytymään tapauksista, joissa reaktorinsydän sulaa ja sula puhkaisee paineastian. Suojarakennuksen sisälle on suunniteltu alue, jolle sula passiivisesti kerätään, pidätetään ja jäähdytetään. Alueelle laaditaan valurautaelementeistä ns.sydänsieppari, joka tulvitetaan vedellä. Sydänsulan tuottama jälkilämpö siirtyyveteen, mistä se poistetaan suojarakennuksen jälkilämmönpoistojärjestelmän kautta. Suuri osa lämmöstä poistuu sydänsulasta sen yläpuolella olevaan veteen, mutta lämmönsiirron tehostamiseksi myös sydänsiepparin alapuolelle on sijoitettu vedellä täytettävät jäähdytyskanavat. Jotta sydänsiepparin toiminta voitaisiin todentaa, on Lappeenrannan Teknillisellä Yliopistolla rakennettu Volley-koelaitteisto tätä tarkoitusta varten. Koelaitteisto koostuu kahdesta täysimittaisesta valuraudasta tehdystä jäähdytyskanavasta. Sydänsulan tuottamaa jälkilämpöä simuloidaan koelaitteistossa sähkövastuksilla. Tässä työssä kuvataan simulaatioiden suorittaminen ja vertaillaan saatuja arvoja mittaustuloksiin. Työ keskittyy sydänsiepparista jäähdytyskanaviin tapahtuvan lämmönsiirron teoriaan jamekanismeihin. Työssä esitetään kolme erilaista korrelaatiota lämmönsiirtokertoimille allaskiehumisen tapauksessa. Nämä korrelaatiot soveltuvat erityisesti tapauksiin, joissa vain muutamia mittausparametreja on tiedossa. Työn toinen osa onVolley 04 -kokeiden simulointi. Ensin käytettyä simulointitapaa on kelpoistettuvertaamalla tuloksia Volley 04 ja 05 -kokeisiin, joissa koetta voitiin jatkaa tasapainotilaan ja joissa jäähdytteen käyttäytyminen jäähdytyskanavassa on tallennettu myös videokameralla. Näiden simulaatioiden tulokset ovat hyvin samanlaisiakuin mittaustulokset. Korkeammilla lämmitystehoilla kokeissa esiintyi vesi-iskuja, jotka rikkoivat videoinnin mahdollistavia ikkunoita. Tämän johdosta osassa Volley 04 -kokeita ikkunat peitettiin metallilevyillä. Joitakin kokeita jouduttiin keskeyttämään laitteiston suurten lämpöjännitysten johdosta. Tällaisten testien simulaatiot eivät ole yksinkertaisia suorittaa. Veden pinnan korkeudesta ei ole visuaalista havaintoa. Myöskään jäähdytteen tasapainotilanlämpötiloista ei ole tarkkaa tietoa, mutta joitakin oletuksia voidaan tehdä samoilla parametreilla tehtyjen Volley 05 -kokeiden perusteella. Mittaustulokset Volley 04 ja 05 -kokeista, jotka on videoitu ja voitu ajaa tasapainotilaan saakka, antoivat simulaatioiden kanssa hyvin samankaltaisia lämpötilojen arvoja. Keskeytettyjen kokeiden ekstrapolointi tasapainotilaan ei onnistunut kovin hyvin. Kokeet jouduttiin keskeyttämään niin paljon ennen termohydraulista tasapainoa, ettei tasapainotilan reunaehtoja voitu ennustaa. Videonauhoituksen puuttuessa ei veden pinnan korkeudesta saatu lisätietoa. Tuloksista voidaan lähinnä esittää arvioita siitä, mitä suuruusluokkaa mittapisteiden lämpötilat tulevat olemaan. Nämä lämpötilat ovat kuitenkin selvästi alle sydänsiepparissa käytettävän valuraudan sulamislämpötilan. Joten simulaatioiden perusteella voidaan sanoa, etteivät jäähdytyskanavien rakenteet sula, mikäli niissä on pienikin jäähdytevirtaus, eikä useampia kuin muutama vierekkäinen kanava ole täysin kuivana.

The Boundaries of a Firm in the Pulp and Paper Industry: Complementarities of the Resource-Based View and Transaction Cost Economics

Tämän tutkimuksen tarkoituksena on tutkia sellu- ja paperiteollisuuden toimintojen luonnetta sekä miten yrityksen rajapinnat ovat muodostuneet ko. teollisuudenalalla. Tutkimus on eksploratiivinen ja luonteeltaan kvalitatiivinen. Tutkimuksen aineisto kerättiin yrityksissä tehdyillä teemahaastatteluilla. Sellu- ja paperitehtaan toimintojen analysoinnissa käytetään resurssiperusteista näkemystä ja transaktiokustannusteoriaa. Tutkimuksen yritysten rakennetta voidaan pitää varsin konservatiivisena. Teoreettinen kehys pystyi selittämään varsinaisen tuotannon järjestämistä varsin hyvin. Tukitoiminnoissa löytyi ristiriitoja teorian ja todellisuuden välillä. Tuotantotoiminnot kannattaa pitää yrityksen sisällä, koska ne täyttävät VRIN-attribuutit ja niihin liittyy korkeita transaktiokustannuksia. Suurin osa tukitoiminnoista voidaan luokitella triviaaleiksi. Joitain tukitoimintoja voidaan kuitenkin luokitella strategisesti tärkeiksi, ja voidaan päätellä, että ne pitäisi pitää yrityksen sisällä. Tässä suhteessa tulokset olivat kuitenkin ristiriitaisia, ja lisätutkimuksia tarvittaisiin lopullisten johtopäätösten tekemiseen.

From the Resource-Base to Firm Boundaries in the Electricity Network Business - Case Lappeenrannan Energia Oy

Tutkielman tavoitteena oli selvittääcase -yrityksen resurssi- ja kyvykkyyspohjaa resurssiperustaisen näkemyksen mukaan, sekä yrityksen rajoja transaktiokustannusteorian mukaan. Tutkimusongelmia lähestyttiin kirjallisuuskatsauksella, puoli-strukturoiduilla teemahaastatteluilla, sekä kyselylomakkeilla. Tutkielman päätuloksiksi voidaan Tukea löydetty resurssikuilu, resurssien ja kyvykkyyksien tutkinta, sekä kyselylomakkeiden rakentaminen ja käyttö. Tutkielman paljastamasta kuilusta voidaan erottaa kolme päähaastetta; ikääntyvät sähköverkot, ikääntyvä henkilökunta ja liiketoimintaosaamisen puute. Lisäksi resurssien ja kyvykkyyksien tutkinta nosti esille organisaation rutiineja ja prosesseja, ja kyselylomakkeet osoittautuivat varsin toimiviksi tutkimuksen kontekstissa. Yhteenvetona voidaan todeta, että sähköverkkoliiketoiminta ja case yritys ovat suuren rakennemuutoksen alla, joka tuo mukanaan suuria haasteita myös lähitulevaisuudessa.

The Dynamics of Force Fluctuations in Shear Granular Flows

Tämän työn tavoitteena oli tutkia rakeisen materiaalin kinematiikkaa ja rakentaa koelaitteisto rakeisen materiaalin leikkausjännitysvirtauksien tutkimiseen. Kokeellisessa osassa on keskitytty sisäisiin voimaheilahteluihin ja niiden ymmärtämiseen. Teoriaosassa on käyty läpi rakeisen materiaalin yleisiä ominaisuuksia ja lisäksi on esitetty kaksi eri tapaa mallintaa fysikaalisien ominaisuuksien heilahteluja rakeisessa materiaalissa. Nämä kaksi esitettyä mallinnusmenetelmää ovat skalaarinen q-malli ja simulointi. Skalaarinen q-malli määrittelee jokaiseen yksittäiseen rakeeseen kohdistuvan jännityksen, rakeen ollessa osa 2- tai 3-dimensionaalista asetelmaa. Tämän mallin perusidea on kuvata jännityksien epähomogeenisuutta, joka johtuu rakeiden satunnaisasettelusta. Simulointimallinnus perustuu event-driven algoritmiin, missä systeemin dynamiikkaa kuvataan yksittäisillä partikkelien törmäyksillä. Törmäyksien vaiheet ratkaistiin käyttämällä liikemääräyhtälöitä ja restituution määritelmää. Teoriaosuudessa käytiin vielä pieniltä osin läpi syitä jännitysheilahteluihin ja rakeisen materiaalin lukkiintumiseen. Tutkimuslaitteistolla tutkittiin rakeisen materiaalin käyttäytymistä rengasmaisessa leikkausjännitysvirtauksessa. Tutkimusosuuden päätavoitteena oli mitata partikkelien kosketuksista ja törmäyksistä johtuvia hetkellisiä voimaheilahteluja rengastilavuuden pohjalta. Rakeisena materiaalina tutkimuksessa käytettiin teräskuulia. Jännityssignaali ajan funktiona osoittaa suurta heilahtelua, joka voi olla jopa kertalukua keskiarvosta suurempaa. Tällainen suuren amplitudin omaava heilahtelu on merkittävä haittapuoli yleisesti rakeisissa materiaaleissa käytettyjen jatkuvuusmallien kanssa. Tällainen heilahtelu tekee käytetyt jatkuvuusmallit epäpäteviksi. Yleisellä tasolla jännityksien todennäköisyysjakauma on yhtäpitävä skalaarisen q-mallin tuloksien kanssa. Molemmissa tapauksissa todennäköisyysjakaumalla on eksponentiaalinen muoto.

Neuropeptide Y at the cellular level – Studies on PreproNPY L7P Polymorphism and the Mitochondrial Form of NPY

Neuropeptide Y (NPY) is a widely expressed neurotransmitter in the central and peripheral nervous systems. Thymidine 1128 to cytocine substitution in the signal sequence of the preproNPY results in a single amino acid change where leucine is changed to proline. This L7P change leads to a conformational change of the signal sequence which can have an effect on the intracellular processing of NPY. The L7P polymorphism was originally associated with higher total and LDL cholesterol levels in obese subjects. It has also been associated with several other physiological and pathophysiological responses such as atherosclerosis and T2 diabetes. However, the changes on the cellular level due to the preproNPY signal sequence L7P polymorphism were not known. The aims of the current thesis were to study the effects of the [p.L7]+[p.L7] and the [p.L7]+[p.P7] genotypes in primary cultured and genotyped human umbilical vein endothelial cells (HUVEC), in neuroblastoma (SK-N-BE(2)) cells and in fibroblast (CHO-K1) cells. Also, the putative effects of the L7P polymorphism on proliferation, apoptosis and LDL and nitric oxide metabolism were investigated. In the course of the studies a fragment of NPY targeted to mitochondria was found. With the putative mitochondrial NPY fragment the aim was to study the translational preferences and the mobility of the protein. The intracellular distribution of NPY between the [p.L7]+[p.L7] and the [p.L7]+[p.P7] genotypes was found to be different. NPY immunoreactivity was prominent in the [p.L7]+[p.P7] cells while the proNPY immunoreactivity was prominent in the [p.L7]+[p.L7] genotype cells. In the proliferation experiments there was a difference in the [p.L7]+[p.L7] genotype cells between early and late passage (aged) cells; the proliferation was raised in the aged cells. NPY increased the growth of the cells with the [p.L7]+[p.P7] genotype. Apoptosis did not seem to differ between the genotypes, but in the aged cells with the [p.L7]+[p.L7] genotype, LDL uptake was found to be elevated. Furthermore, the genotype seemed to have a strong effect on the nitric oxide metabolism. The results indicated that the mobility of NPY protein inside the cells was increased within the P7 containing constructs. The existence of the mitochondria targeted NPY fragment was verified, and translational preferences were proved to be due to the origin of the cells. Cell of neuronal origin preferred the translation of mature NPY (NPY1-36) when compared to the non neuronal cells that translated both, NPY and the mitochondrial fragment of NPY. The mobility of the mitochondrial fragment was found to be minimal. The functionality of the mitochondrial NPY fragment remains to be investigated. L7P polymorphism in the preproNPY causes a series of intracellular changes. These changes may contribute to the state of cellular senescence, vascular tone and lead to endothelial dysfunction and even to increased susceptibility to diseases, like atherosclerosis and T2 diabetes.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

Distributed ControlArchitecture of Power Electronics Building-Block-Based Frequency Converters

The increasing power demand and emerging applications drive the design of electrical power converters into modularization. Despite the wide use of modularized power stage structures, the control schemes that are used are often traditional, in other words, centralized. The flexibility and re-usability of these controllers are typically poor. With a dedicated distributed control scheme, the flexibility and re-usability of the system parts, building blocks, can be increased. Only a few distributed control schemes have been introduced for this purpose, but their breakthrough has not yet taken place. A demand for the further development offlexible control schemes for building-block-based applications clearly exists. The control topology, communication, synchronization, and functionality allocationaspects of building-block-based converters are studied in this doctoral thesis. A distributed control scheme that can be easily adapted to building-block-based power converter designs is developed. The example applications are a parallel and series connection of building blocks. The building block that is used in the implementations of both the applications is a commercial off-the-shelf two-level three-phase frequency converter with a custom-designed controller card. The major challenge with the parallel connection of power stages is the synchronization of the building blocks. The effect of synchronization accuracy on the system performance is studied. The functionality allocation and control scheme design are challenging in the seriesconnected multilevel converters, mainly because of the large number of modules. Various multilevel modulation schemes are analyzed with respect to the implementation, and this information is used to develop a flexible control scheme for modular multilevel inverters.

Developing the service offering of an industrial company

The purpose of this thesis was to determine, what kind of service offering the case company should provide to its customers in the Australian market. For this, a model for analysing the competitive environment was developed. In the model, three players were considered: customers, competitors and the case company. Benchmarking was used in identifying competitors’ offerings currently available in the market. Experts inside the case company were consulted for determining the customer need. The competitors’ offerings were analysed on the basis of Pekkarinen et al.’s (2009) framework, dividing the offerings to services supporting the supplier’s product (SSP), supporting the client (SSC), supporting the client’s network (SSN), supporting mutual actions (SSM) and benefit and risk sharing elements. After this, they were compared to the competitive environment in order to identify areas where the case company can differentiate itself from its competitors in the Australian market. On the basis of the company’s key success factors, and the Finnish service concept currently in use, some additional offerings were suggested for the case company in order to further outperform its competitors in the market. Finally, on the basis of the suggested offerings and competitors’ offerings, a service concept was suggested for the case company to introduce in the Australian market.

Innovations of ageing and societal transition : Dynamics of change of the socio-technical regime of ageing

The purpose of this dissertation is to examine the dynamics of the socio-technical system in the field of ageing. The study stems from the notion that the ageing of the population as a powerful megatrend has wide societal effects, and is not just a matter for the social and health sector. The central topic in the study is change: not only the age structures and structures of society are changing, but also at the same time there is constant development, for instance, in technologies, infrastructures and cultural perceptions. The changing concept of innovation has widened the understanding of innovations related to ageing from medical and assistive technological innovations to service and social innovations, as well as systemic innovations at different levels, which means the intertwined and co-evolutionary change in technologies, structures, services and thinking models. By the same token, the perceptions of older people and old age are becoming more multi-faceted: old age is no longer equated to illnesses and decline, but visions of active ageing and a third age have emerged, which are framed by choices, opportunities, resources and consumption in later life. The research task in this study is to open up the processes and mechanisms of change in the field of ageing, which are studied as a complex, multi-level and interrelated socio-technical system. The question is about co-effective elements consisting of macro-level landscape changes, the existing socio-technical regime (the rule system, practices and structures) and bottom-up niche-innovations. Societal transitions do not account for the things inside the regime alone, or for the long-term changes in the landscape, nor for the radical innovations, but for the interplay between all these levels. The research problem is studied through five research articles, which offer micro-level case studies to macro-level phenomenon. Each of the articles focus on different aspects related to ageing and change, and utilise various datasets. The framework of this study leans on the studies of socio-technical systems and multi-level perspective on transitions mainly developed by Frank Geels. Essential factors in transition from one socio-technological regime to another are the co-evolutionary processes between landscape changes, regime level and experimental niches. Landscape level changes, like the ageing of the population, destabilise the regime in the forms of coming pressures. This destabilization offers windows for opportunity to niche-innovations outside or at fringe of the regime, which, through their breakthrough, accelerate the transition process. However, the change is not easy because of various kinds of lock-ins and inertia, which tend to maintain the stability of the regime. In this dissertation, a constructionist approach of society is applied leaning mainly to the ideas of Anthony Giddens’ theory of structuration, with the dual nature of structures. The change is taking place in the interplay between actors and structures: structures shape people’s practices, but at the same time these practices constitute and reproduce social systems. Technology and other material aspects, as part of socio-technical systems, and the use of them, also take part in the structuration process. The findings of the study point out that co-evolutionary and co-effective relationships between economic, cultural, technological and institutional fields, as well as relationships between landscape changes, changes in the local and regime-level practices and rule systems, are a very complex and multi-level dynamic socio-technical phenomenon. At the landscape level of ageing, which creates the pressures and triggers to the regime change, there are three remarkable megatrends: demographic change, changes in the global economy and the development of technologies. These exert pressures to the socio-technical regime, which as a rule system is experiencing changes in the form of new markets and consumer habits, new ways of perceiving ageing, new models of organising the health care and other services and as new ways of considering innovation and innovativeness. There are also inner dynamics in the relationships between these aspects within the regime. These are interrelated and coconstructed: the prevailing perceptions of ageing and innovation, for instance, reflect the ageing policies, innovation policies, societal structures, organising models, technology and scientific discussion, and vice versa. Technology is part of the inner dynamics of the sociotechnological regime. Physical properties of the artefacts set limitations and opportunities with regard to their functions and uses. The use of and discussion about technology, contributes producing and reproducing the perceptions of old age. For societal transition, micro-level changes are also needed, in form of niche-innovations, for instance new services, organisational models or new technologies, Regimes, as stabilitystriven systems, tend to generate incremental innovations, but radically new innovations are generated in experimental niches protected from ‘normal’ market selection. The windows of opportunity for radical novelties may be opened if the circumstances are favourable for instance by tensions in the socio-technical regime affected by landscape level changes. This dissertation indicates that a change is taking place, firstly, in the dynamic interactionbetween levels, as a result of purposive action and governance to some extent. Breaking the inertia and using the window of opportunity for change and innovation offered by dynamics between levels, presupposes the actors’ special capabilities and actions such as dynamic capabilities and distance management. Secondly, the change is taking place the socio-technological negotiations inside the regime: interaction between technological and social, which is embodied in the use of technology. The use of technology includes small-level contextual scripts that also participate in forming broader societal scripts (for instance defining old age at the society level), which in their turn affect the formation of policies for innovation and ageing. Thirdly, the change is taking place by the means of active formation of the multi-actor innovation networks, where the role of distance management is crucial to facilitate the communication between actors coming from different backgrounds as well as to help the niches born outside the regime to utilise the window of opportunity offered by regime destabilisation. This dissertation has both theoretical and practical contributions. This study participates in the discussion of action-oriented view on transition by opening up of the socio-technological, coevolutionary processes of the multi-faceted phenomenon of ageing, which has lacked systematic analyses. The focus of this study, however, is not on the large-scale coordination and governance, but rather on opening up the incremental elements and structuration processes, which contribute to the transition little by little, and which can be affected to. This increases the practical importance of this dissertation, by highlighting the importance of very tiny, everyday elements in the change processes in the long run.

ESTABLISH & DEPLOY DOWNSTREAM MARKETING CAPABILITIES: a case study research following the framework implementation journey

According to many academic researches, the development of marketing capabilities can enhance organizational performance. Similarly, downstream marketing capabilities have an important role in accomplishment the organizational goals. Particularly the downstream marketing capabilities identified in this research are the Marketing Communication, Selling, Marketing implementation, and Market information management. These four capabilities are summarized under the following abilities. First, the ability to manage customers’ opinion regarding the offered value from the organization. Second, the ability of the organization to obtain orders from new and established customers. Third, the ability of aligning and translate the marketing strategy into an operating action plan along with the deployment of the organizational resources. Forth, the continuous process of gathering and managing information about the markets. Moreover, the literature review of this research shed light on the elements that compose the downstream marketing capabilities. Specifically, this research examined the downstream processes and the required information required to control these processes based on the American Productivity and Quality Center’s Process Classification Framework. Furthermore, the literature review examined some of the technological tools that are used in marketing processes, and also some managerial implication regarding the management of the downstream marketing employees. Along with the investigation of downstream marketing capabilities, the literature review investigated the utilization and the benefits of Component Business Model and Process Classification Framework, as they are defined by the organizations that developed them. Besides this initial study, the research presents how the examined organization is using the two frameworks together by cross-referring them. Finally, the research presents the optimal deployment of the collected downstream capabilities elements in the current organizational structure. The optimal deployment has been grounded on the information collected from the literature review but also from internal documentation, provided from the examined organization. By comparing the optimal deployment and the current condition on the organization, the research exhibits some points for improvement, but also some of the projects that are currently in progress inside the organization and eventually will provide solutions to these downsides.

Integrins on the move

Cancer is a leading cause of death worldwide accounting for 13% of all deaths in 2005. The spread of cancer and formation of metastases is the major cause of mortality among cancer patients. The spread of cancer is based on the cancer cell’s ability to break away from the surrounding tissue and to migrate into new areas in the body. The ability of cells to bind its surroundings and to move is controlled by the mechanical cell surface adhesion receptors called the integrins. Integrins have a critical role in cell adhesion, cell motility and tissue homeostasis. By communicating with ECM, integrins transmit signals from the surrounding environment inside the cell and modulate the function of many important signalling pathways involved in cell survival, development, gene expression, proliferation, motility and cytoskeletal organization. During cell migration integrin-matrix adhesions are formed in front of the cell while rear-adhesions are released during migration. Integrins are endocytosed from the plasma-membrane into the cytoplasm and partly recycled back to new adhesion sites in a process called integrin trafficking. Also, the cell cytoskeleton and protrusions are important in cell migration. Finger-like actin protrusions called filopodia display an interesting cancer relevant cooperation with integrins that is required for cell migration. The expression and function of integrins changes markedly as cells acquire carcinogenic properties. Changed integrin function is partly responsible for detachment of tumor cells from neighbouring cells and for providing enhanced invasive capabilities for tumor cells to disseminate. Similarly, the formation of filopodia is increased in cancer. High myosin-10 expression is related to poor outcome in breast cancer and increased cell migration. The proper function of myosin-10 induced filopodia needs association with β1 integrins. The importance of integrin trafficking and filopodia formation is becoming increasingly more recognized in cancer. This thesis focusses on the role of integrins, integrin trafficking and myosin-10 induced filopodia cancer cell migration.

The Use of Data Envelopment Analysis as Equity Portfolio Selection Criterion in the Finnish Stock Market

This thesis examines the application of data envelopment analysis as an equity portfolio selection criterion in the Finnish stock market during period 2001-2011. A sample of publicly traded firms in the Helsinki Stock Exchange is examined in this thesis. The sample covers the majority of the publicly traded firms in the Helsinki Stock Exchange. Data envelopment analysis is used to determine the efficiency of firms using a set of input and output financial parameters. The set of financial parameters consist of asset utilization, liquidity, capital structure, growth, valuation and profitability measures. The firms are divided into artificial industry categories, because of the industry-specific nature of the input and output parameters. Comparable portfolios are formed inside the industry category according to the efficiency scores given by the DEA and the performance of the portfolios is evaluated with several measures. The empirical evidence of this thesis suggests that with certain limitations, data envelopment analysis can successfully be used as portfolio selection criterion in the Finnish stock market when the portfolios are rebalanced at annual frequency according to the efficiency scores given by the data envelopment analysis. However, when the portfolios were rebalanced every two or three years, the results are mixed and inconclusive.