Effects of stock splits on stock returns: An event study of Finnish companies

Tämän kandidaatintyön tavoitteena on tutkia osakkeen nimellisarvon jakamisen vaikutusta osakkeen markkina-arvoon Suomessa vuosina 1996-2007. Ilmiötä tarkastellaan tapahtumatutkimusmenetelmän avulla ja lopullinen tutkittavien osakesplittien määrä on 38. Tutkimuksessa ei löydetty epänormaaleja tuottoja splittien julkistushetkellä, joten tämän aineiston mukaan sijoittajat eivät pitäneet sitä johdolta tulevana positiivisena signaalina. Sitä vastoin tutkimuksessa löydettiin positiivinen kurssimuutos niiden osakkeiden kohdalla, jolloin pörssiyhtiö ilmoitti splitin ohella myös osingonjaostaan.

Analysis of companies' software as a service adoption intention factors

The goal of this study is to develop managerial recommendations for international vendors and system integrators, which offer Software as a Service for enterprise information systems on the Russian market. Those recommendations can be used to develop marketing, sales, new product and service level agreement strategies. For those reasons factors affecting SaaS adoption were determined and their influence on intention to adoption was examined.

Knowledge modeling for innovative companies: case of business incubator

The paper presents a study which is aimed at building a knowledge model for a case company – business incubator “Ingria” (St. Petersburg, Russia). The business incubator is one of its kind organization in St. Petersburg, and one of the few in Russia, providing services for innovative entrepreneurial companies at an international level. Business incubation impact is deeply researched from the point of view of knowledge engineering. The paper also provides a broad analysis of various knowledge engineering tools used for visualization of knowledge, as well as knowledge modeling techniques.

Intellectual capital management in international and Russian software companies

The importance of the company’s intellectual capital (IC) increased during the last decades due to knowledge-based economy development. Despite the clear understanding of the IC importance, researchers agree on the fact that many difficulties in management of intangibles still exist from the both theoretical and practical points of view. The goal of the study is to conduct a comparison of IC management approaches used in international and Russian software companies. To carry out a proper comparison and identify similarities and differences, software firms are explored from the point of view of IC, and then be compared in the context of international and Russian sectors. At the end of the study, current IC management findings in international and Russian software companies are presented, and comparison of IC management is done. It was investigated from the comparison that international and Russian software companies have similarities and few principal differences in several IC management areas. The comparison of IC management approaches between international and Russian software companies provide helpful information to both, researchers and practitioners.

Innovation and Internationalisation in Russian Companies: Challenges and Opportunities for Open Innovation and Cooperation

Increasing globalisation and intensified cross-border cooperation, together with significant technological breakthroughs, create a fascinating gap for the research of the relationship between internationalisation and innovation on national, regional and company levels in Russia. The intensified international trade between countries and regions benefited from favourable institutional conditions, and facilitated the technology transfer and the development of innovations on the national level. This study approaches the same question from the company perspective; if certain companies are more innovative than other domestic companies, will they start internationalisation more easily or get involved in cooperation with international stakeholders? When companies operate in international markets, how do they obtain knowledge? Moreover, would this new knowledge from the foreign market help then to increase innovativeness, competitiveness and develop operations in domestic/local and foreign markets? Considering the role of foreign direct investments (FDI), the research in hand tries to find out the role of companies with FDI on the other players on the home market. Do foreigners bring new technology, innovation to the country? Is there spillover effect observed and how local companies can benefit from them? This dissertation studies the internationalisation and innovation in Russian companies, both from the outward internationalisation and inward internationalisation perspectives. Russian companies developed quickly during the transition period, after the dissolution of the Soviet Union. The common background of these companies, the effects of the change of ownership, and some managerial difficulties make them more sensitive to competitions issues, and in this context, the opportunities brought by the developing innovations are seen in companies and on the governmental level.

Liiketoimintamalli teollisuuden ylijäämälämmön hyödyntämisestä kaukolämpöverkoissa

Tässä työssä tarkastellaan teollisuuden ylijäämälämmön hyödyntämistä kaukolämpöverkoissa liiketoimintamallin näkökulmasta. Työn tilaaja on YIT Teollisuus Oy, joka haluaa osaltaan olla mukana ratkaisemassa ilmastonmuutoksesta ja hiilidioksidipäästöjen vähentämistarpeista aiheutuvia yhteiskunnan kehitystarpeita. Energiatehokkuuden parantaminen on yksi nopeimmista keinoista vähentää päästöjä. Teollisuuden energiatehokkuutta voidaan parantaa ottamalla talteen sähköntuotannossa ja tuotantoprosesseissa syntyvää ylijäämälämpöä. Aikaisempien tutkimusten perusteella tiedetään, että Suomessa syntyy vuosittain noin 4–6 TWh ylijäämälämpöä, joka voitaisiin hyödyntää jo olemassa olevien kaukolämpöverkkojen välityksellä rakennusten lämmittämiseen. Kuitenkin vuonna 2008 teollisuus myi ylijäämälämpöä kaukolämpöverkkoihin yhteensä vain 770 GWh, mikä vastaa noin 2,5 prosenttia kokonaiskaukolämmön tarpeesta. Tämän työn tuloksena syntyi liiketoimintamalli, joka esittelee ne palvelut, jotka YIT tuottaa asiakkailleen tilanteissa, joissa teollisuudessa syntyvää ylijäämälämpöä hyödynnetään kaukolämpöverkoissa. Jotta liiketoimintamalli toimisi käytännössä, on siitä oltava hyötyä kaikille osapuolille. Asiakkaan on siis voitava kattaa palvelusta ja sen rahoituksesta syntyvät kustannukset myydyn ylijäämälämmön tuotolla (teollisuuslaitos) tai säästyneistä energian hankintakustannuksista (kaukolämpöyhtiö). Eniten ylijäämälämmön käytöstä voivat hyötyä kaukolämpöyhtiöt, joiden tuotannosta korkeintaan pieni osa tulee yhteistuotannosta ja joilla uusiutuvien energialähteiden osuus on vähäinen. Lisäksi kaukolämpöverkon koon vuotuisena kulutuksena mitattuna on oltava riittävän suuri ja kaukolämmön hinnan suhteellisen korkea. Myös alueen ennustettu väestönkasvu ja uudet suunnitteilla olevat asuinalueet saattavat parantaa ylijäämälämmön hyödyntämisen houkuttelevuutta. YIT:n näkökulmasta ylijäämälämmön talteenottoprojektit ovat hyvä lisä sen nykyiseen palvelutarjontaan. Myös yhteiskunnallisella tasolla aihe on merkittävä. Vaikka nykytietämyksen mukaan energian käytön tehostaminen ja päästöttömän tuotannon lisääminen ovat molemmat yhtä merkittäviä keinoja ilmastotavoitteiden saavuttamisen kannalta, panostetaan Suomessa tällä hetkellä lähinnä tuotannon tukemiseen. Lähivuosien poliittiset ratkaisut vaikuttavatkin vahvasti siihen, kuinka paljon tulevaisuudessa ylijäämälämpöä hyödynnetään rakennusten lämmittämisessä.

Forest Biomass Resources and Technological Prospects for the Production of Second-generation Biofuels in Finland by 2020

Introduction of second-generation biofuels is an essential factor for meeting the EU’s 2020 targets for renewable energy in the transport sector and enabling the more ambitious targets for 2030. Finland’s forest industry is strongly involved in the development and commercialising of second-generation biofuel production technologies. The goal of this paper is to provide a quantified insight into Finnish prospects for reaching the 2020 national renewable energy targets and concurrently becoming a large-scale producer of forest biomass based second-generation biofuels feeding the increasing demand in European markets. The focus of the paper is on assessing the potential for utilising forest biomass for liquid biofuels up to 2020. In addition, technological issues related to the production of second-generation biofuels were reviewed. Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood based biofuels. In 2020, biofuel production from domestic forest biomass in Finland may reach nearly a million ton (40 PJ). With the existing biofuel production capacity (20 PJ/yr) and national biofuel consumption target (25 PJ) taken into account, the potential net export of biofuels from Finland in 2020 would be 35 PJ, corresponding to 2–3% of European demand. Commercialisation of second-generation biofuel production technologies, high utilisation of the sustainable harvesting potential of Finnish forest biomass, and allocation of a significant proportion of the pulpwood harvesting potential for energy purposes are prerequisites for this scenario. Large-scale import of raw biomass would enable remarkably greater biofuel production than is described in this paper.

Simulation and optimization of IGCC technique for power generation and hydrogen production by using lignite Thar coal and cotton stalk

The purpose of this study was to simulate and to optimize integrated gasification for combine cycle (IGCC) for power generation and hydrogen (H2) production by using low grade Thar lignite coal and cotton stalk. Lignite coal is abundant of moisture and ash content, the idea of addition of cotton stalk is to increase the mass of combustible material per mass of feed use for the process, to reduce the consumption of coal and to increase the cotton stalk efficiently for IGCC process. Aspen plus software is used to simulate the process with different mass ratios of coal to cotton stalk and for optimization: process efficiencies, net power generation and H2 production etc. are considered while environmental hazard emissions are optimized to acceptance level. With the addition of cotton stalk in feed, process efficiencies started to decline along with the net power production. But for H2 production, it gave positive result at start but after 40% cotton stalk addition, H2 production also started to decline. It also affects negatively on environmental hazard emissions and mass of emissions/ net power production increases linearly with the addition of cotton stalk in feed mixture. In summation with the addition of cotton stalk, overall affects seemed to negative. But the effect is more negative after 40% cotton stalk addition so it is concluded that to get maximum process efficiencies and high production less amount of cotton stalk addition in feed is preferable and the maximum level of addition is estimated to 40%. Gasification temperature should keep lower around 1140 °C and prefer technique for studied feed in IGCC is fluidized bed (ash in dry form) rather than ash slagging gasifier

Stock Repurchase Authorizations - Finnish Companies

The aim of this study is to examine the abnormal market reaction caused by share repurchase authorizations. We study this abnormal reaction from five different angles. First four concentrate on average abnormal returns while the fifth concentrates on cumulative abnormal return. Data consists of 508 share repurchase authorization from Finnish stock market. Event study methodology is used to examine the stock price reaction and regression analysis is used to find correlation between actual buybacks and abnormal returns. The empirical results show that markets do usually react positively to share repurchase authorizations. There are some differences depending which of the five angles the abnormal returns are being examined. Statistically we can confirm that some authorization give positive reaction while others do not. Also we didn’t find a statistically significant positive correlation between actual buybacks and abnormal returns.

Worker motivation in crowdsourcing new product development

In the study the recently appeared technology of crowdsourcing and its implications to new product development activities. The goal of the research is to figure out the motivating factors used in crowdsourcing projects related to new product development. The study is based on the theoretical backgrounds of crowdsourcing; new product development, and motivation, which resulted in the framework for the crowdsourcing cases assessment and the list of possible motivating factors used for the analysis. The research is based on 16 crowdsourcing projects divided in 4 sets according to the stage of new product development at which they are directed. The motivating factors present in the projects were distinguished and explained. Further analysis allowed making conclusions showing which of the motivating factors are suitable for the crowdsourcing projects related to the particular stage of new product development. The results can be used for creation or assessment of crowdsourcing projects for the companies because the main factor of success for crowdsourcing is motivation, and the work is answering how to motivate the workers.

Private Home Care in Municipal Service Systems – A Case Study among Finnish and Swedish Municipalities

The aim of this study is to assess the current and future preconditions for conducting private business in municipal service systems for home care in Lahti and Hyvinkää in Finland, and in Uppsala and Huddinge in Sweden. This study also aims to assess the implications of quality related issues on the preconditions for conducting private business in the service systems in question. The theories and the research methodologies of the study are based on the Business Model Generation and the Business Model Canvas -concepts. Also a couple of frameworks on implications of quality are applied and integrated into the study. The study is completed as a case study – with structured and identical approaches for all four municipalities. The analyses and assessments of the study are primarily qualitative, but supported by simple quantitative methodologies. The data of the study consists primarily of publicly available information, and secondarily of answers provided by the case-municipalities to multiple choice questions. The results of the study show that the service systems for home care among the case-municipalities are, from perspective of private companies, diverse with local characteristics. Both the premises for conducting private business and the quality-issues are in many respects different in the Finnish and the Swedish case-municipalities. This is partly due to differences in the national service systems; the service voucher system versus the system of choice. Still, it appears that the current preconditions for conducting private business in the service systems for home care, including the implications of quality, would be more favorable in Uppsala and Huddinge than in Lahti and Hyvinkää. On the other hand, the service systems are subject to changes, and the most positive and significant development is here forecasted for a Finnish case-municipality (Lahti). Communication of quality is clearly more advanced in the Swedish case-municipalities. The results of this study can be utilized in several ways, for instance by private companies interested in entering into service systems for home care, either in some of the case-municipalities, or in some other Finnish or Swedish municipalities. Also municipalities can apply the analyses of the study when designing, developing or evaluating their own service systems for home care.

Hazard Risk Management in Large Nordic Companies' Operations in Russia

The objective of this research was to describe how Nordic companies manage hazard risks in their operations in Russia and how the local business environment is considered to affect the hazard risks. Research methods used in this research were literature review and expert interviews. Twelve Nordic industrial companies operating in different fields of industry were interviewed. Large Nordic companies typically guide risk management centralized from the parent company on behalf of the whole company group and the risk management standards and policies are integrated in all subsidiaries. Parent companies typically control hazard risk management in Russia by regular risk management reporting, auditing the Russian sites and by training local managers and employees to risk management work. Many companies have experienced several losses in the first years of operating in Russia before the risk management policies have been implemented in Russian subsidiaries. The companies have learned to take local characteristics better into account by experience and most companies are quite satisfied with their current risk management standards in Russia. The interviews indicate that companies experience especially the poor quality of infrastructure, some features in Russian organizational culture and high level of criminality to increase hazard risks in Russia. However, understanding these features and risks in the business environment makes the management of these risks possible. Risks related to infrastructure can be managed in advance by decreasing dependencies of infrastructure and considering the infrastructure quality already when planning the business operations. Also good local network is often considered critical in order to overcome the complications related to infrastructure. Russian personnel has typically different attitude towards risk management than Nordic personnel and neglecting safety and maintenance and concealing losses is more typical in Russia. By training and guiding the local personnel risk management and safety work and desired ways of actions these risks can be decreased. Criminality risks are often managed to certain extent by investing in security, increasing supervising and paying attention to reliability of the employees and other interest groups of the company.

Palveluliiketoimintamallin kehittäminen teolliselle laitetoimittajalle

Tässä tutkimuksessa käsitellään teollisuuden palveluliiketoimintaa. Yritykset ovat perinteisesti saavuttaneet kilpailuetua markkinoilla tuottamalla teknisesti innovatiivisia koneita ja laitteita, mutta viime vuosien aikana yritykset ovat havainneet tarpeen myös palveluliiketoiminnan kehitykselle. Kohdeyrityksenä on teollisuudelle korkealuokkaisia mittalaitteita kehittävä ja valmistava yritys. Tutkimuksen tarkoituksena oli kehittää uusi innovatiivinen vuokraukseen perustuva palveluliiketoimintamalli perinteisen hankinnan sijaan. Olennaisena osana uuteen palveluliiketoimintamalliin liittyi myös tuotteen elinkaarikustannusten selvittäminen ja laskeminen. Toisena tutkimuksen kohteena oli selvittää semi-kvalitatiivisen kyselytutkimuksen avulla, miten yrityksen asiakkaat ja henkilökunta näkevät palveluiden tuottamisen nykytilan ja mitä haasteita palveluliiketoimintaan siirtyminen aiheuttaa organisaatiolle. Työn teoriaosuudessa käsiteltiin palveluliiketoimintaa eri näkökulmista, palvelun laadun muodostumista sekä uuden liiketoimintamallin kehittämistä Osterwalderin Canvas mallin avulla. Lisäksi käsiteltiin elin-kaarilaskennan soveltamista palveluliiketoiminnassa sekä eri investointimalleja teollisiin palveluihin. Kyselytutkimuksen tulosten perusteella asiakkaiden ja yrityksen henkilökunnan näkemykset erosivat palvelun laadun ja prosessien nykytilasta. Asiakkaat arvostivat palvelut paremmalle tasolle kuin henkilökunta. Tulosten perusteella yrityksen olisi kohdennettava resursseja sisäisten prosessien parantamiseen ja kehitettävä organisaatiota enemmän palveluorientoituneeksi. Tuotteen elinkaarikustannukset onnistuttiin selvittämään hyvin ja niiden avulla pystyttiin luomaan sekä yritykselle kannattava että asiakkaille houkutteleva palveluliiketoimintamalli, jonka avulla yrityksen on mahdollista palvella asiakkaitaan entistä paremmin.