Litteratur och livskunskap : modersmålslärarens berättelse om undervisningen i årkurs 7-9

-

Manifestation of the pairing symmetry in the vortex core structure in iron-based superconductors

The superconducting gap is a basic character of a superconductor. While the cuprates and conventional phonon-mediated superconductors are characterized by distinct d- and s-wave pairing symmetries with nodal and nodeless gap distributions respectively, the superconducting gap distributions in iron-based superconductors are rather diversified. While nodeless gap distributions have been directly observed in Ba1–xKxFe2As2, BaFe2–xCoxAs2, LiFeAs, KxFe2–ySe2, and FeTe1–xSex, the signatures of a nodal superconducting gap have been reported in LaOFeP, LiFeP, FeSe, KFe2As2, BaFe2–xRuxAs2, and BaFe2(As1–xPx)2. Due to the multiplicity of the Fermi surface in these compounds s± and d pairing states can be both nodeless and nodal. A nontrivial orbital structure of the order parameter, in particular the presence of the gap nodes, leads to effects in which the disorder is much richer in dx2–y2-wave superconductors than in conventional materials. In contrast to the s-wave case, the Anderson theorem does not work, and nonmagnetic impurities exhibit a strong pair-breaking influence. In addition, a finite concentration of disorder produces a nonzero density of quasiparticle states at zero energy, which results in a considerable modification of the thermodynamic and transport properties at low temperatures. The influence of order parameter symmetry on the vortex core structure in iron-based pnictide and chalcogenide superconductors has been investigated in the framework of quasiclassical Eilenberger equations. The main results of the thesis are as follows. The vortex core characteristics, such as, cutoff parameter, ξh, and core size, ξ2, determined as the distance at which density of the vortex supercurrent reaches its maximum, are calculated in wide temperature, impurity scattering rate, and magnetic field ranges. The cutoff parameter, ξh(B; T; Г), determines the form factor of the flux-line lattice, which can be obtained in _SR, NMR, and SANS experiments. A comparison among the applied pairing symmetries is done. In contrast to s-wave systems, in dx2–y2-wave superconductors, ξh/ξc2 always increases with the scattering rate Г. Field dependence of the cutoff parameter affects strongly on the second moment of the magnetic field distributions, resulting in a significant difference with nonlocal London theory. It is found that normalized ξ2/ξc2(B/Bc2) dependence is increasing with pair-breaking impurity scattering (interband scattering for s±-wave and intraband impurity scattering for d-wave superconductors). Here, ξc2 is the Ginzburg-Landau coherence length determined from the upper critical field Bc2 = Φ0/2πξ2 c2, where Φ0 is a flux quantum. Two types of ξ2/ξc2 magnetic field dependences are obtained for s± superconductors. It has a minimum at low temperatures and small impurity scattering transforming in monotonously decreasing function at strong scattering and high temperatures. The second kind of this dependence has been also found for d-wave superconductors at intermediate and high temperatures. In contrast, impurity scattering results in decreasing of ξ2/ξc2(B/Bc2) dependence in s++ superconductors. A reasonable agreement between calculated ξh/ξc2 values and those obtained experimentally in nonstoichiometric BaFe2–xCoxAs2 (μSR) and stoichiometric LiFeAs (SANS) was found. The values of ξh/ξc2 are much less than one in case of the first compound and much more than one for the other compound. This is explained by different influence of two factors: the value of impurity scattering rate and pairing symmetry.

[Vittoria mio core = Voiton oot saava]

Soitinnus: lauluääni (tenori), orkesteri.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Fedora Commons as core repository of the EU legislation

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Integrating Use of Customer Information Throughout Multiple Sales Channels to Create Customer Competence

Customer knowledge management (CKM) practices enable organizations to create customer competence with systematic use of customer information that is integrated throughout the organization. Nonetheless, organizations are not able to fully exploit the vast amount of data available. Previous research on use of customer information is limited especially in a multichannel environment. The aim of this study was to identify the main obstacles for utilizing customer information efficiently across multiple sales channels. The study was conducted as a single case study in order to gain deeper understanding of the research problem. The empirical findings indicate that lack of CKM practices and a common goal are major challenges obstructing effective utilization of customer information. Furthermore, decentralized organizational structure and insufficient analytical skills create obstacles for information sharing and capabilities to process information and create new knowledge. The implications of the study suggest that in order to create customer competence organizations should shift their focus from technology to the organizational factors affecting use of information and implement CKM practices throughout the organization.

Posliinitehtaan tuotantostrategia

Fiskars konserniin kuuluvan Arabian posliinitehtaan tuotantostrategia on päivitetty edellisen kerran vuonna 2008. Tuolloin on määritelty ne tuoteryhmät jotka hankitaan ulkopuolisilta toimittajilta sekä ne tuoteryhmät jotka valmistetaan omalla tehtaalla. Tuotteiden yksikkökustannusten merkittävän nousun myötä, tuotantostrategiaa on tullut tarvetta muuttaa, kuitenkin niin että omalla tehtaalla on rooli sekä valmistusyksikkönä että osaamiskeskuksena. Diplomityössä tarkastellaan Arabian tehtaan tilannetta nykyisten valmistusteknologioiden, ydinosaamisen, nykyisen toimittajakentän ja kustannusrakenteiden kautta sekä kuvataan nykyisen tuotantostrategian haasteet. Teorian tarjoaman viitekehyksen ja Fiskars Operating Modelin suuntaviivoja noudattaen laaditaan tehtaalle uusi tuotantostrategia, jonka avulla määritellään tehtaalla valmistettavat tuoteryhmät, valmistusteknologiat ja tarvittavat investoinnit. Lisäksi määritellään tehtaalle rooli keraamisen osaamisen keskuksena ja vierailukohteena.

IT:n ja liiketoiminnan välisen palvelutason hallinta ulkoistetussa IT- palvelumallissa

Knowledge and competence are in important role in today’s demanding business environment where hard competition forces everyone to specialize and concentrate more to core competencies. Companies are outsourcing services, making processes more efficient and utilizing better their staff and available knowledge capital. It requires good strategic planning, process measuring and management and motivated staff, who is willing to continuously learn and absorb new information. This Thesis examines almost total IT service outsourcing to international service provider in situation where company previously had own IT. Work contains problematic situations during the change and suggestions how to improve services and understand the new model in a better way.

Nurse Competence of Graduating Nursing Students

The competence of graduating nursing students is an important issue in health care as it is related to professional standards, patient safety and the quality of nursing care. Many changes in health care lead to increased demand with respect to nurses’ competence as well the number of nurses. The purpose of this empirical study was to i) describe the nurse competence areas of nursing students in Europe, ii) evaluate the nurse competence of graduating nursing students, iii) identify factors related to the nurse competence, and to iv) assess the congruence between graduating nursing students’ self-assessments and their mentors’ assessments of students’ nurse competence. The study was carried out in two phases: descriptive phase and evaluation phase. The descriptive phase focused on describing the nurse competence areas of nursing students in Europe with the help of a literature review (n=10 empirical studies and n=4 additional documents). Thematic analysis was used as the analysis method. In the evaluation phase, the nurse competence with particular focus on nursing skills of graduating nursing students (n=154) was assessed. In addition, factors related to the nurse competence were examined. Also, the congruence between graduating nursing students’ self-assessments and their mentors’ assessments of students’ nurse competence was evaluated by comparing graduating nursing students’ self-assessments with the assessments by their mentors (n=42) in the final clinical placement in four university hospitals. Descriptive statistics and inferential statistics were used to analyse the data. Based on the results, the nurse competence of nursing students in Europe consists of nine main competence areas: (1) professional/ethical values and practice, (2) nursing skills and interventions, (3) communication and interpersonal skills, (4) knowledge and cognitive ability, (5) assessment and improving quality in nursing, (6) professional development, (7) leadership, management and teamwork, (8) teaching and supervision, and (9) research utilization. Graduating nursing students self-assessed their nurse competence as good. However, when graduating nursing students’ nurse competence was assessed by their mentors, the results were poorer. Readiness for practice based on nurse education, pedagogical atmosphere on the ward, supervisory relationship between student and mentor and being in paid work in health care at the moment of the study were the most significant factors related to the nurse competence. Conclusions: Nurse competence can be evaluated with a scale based on self-assessment, but other evaluation methods could be used alongside to ensure that nurse competence can be completed and evaluated critically. Practical implications are presented for nurse education and nursing practice. In future, longitudinal research is needed in order to understand the development of nurse competence during nurse education and the transition process from a nursing student to a professional nurse.

Agent-based management systems for many-core platforms : rigorous design and efficient implementation

Due to various advantages such as flexibility, scalability and updatability, software intensive systems are increasingly embedded in everyday life. The constantly growing number of functions executed by these systems requires a high level of performance from the underlying platform. The main approach to incrementing performance has been the increase of operating frequency of a chip. However, this has led to the problem of power dissipation, which has shifted the focus of research to parallel and distributed computing. Parallel many-core platforms can provide the required level of computational power along with low power consumption. On the one hand, this enables parallel execution of highly intensive applications. With their computational power, these platforms are likely to be used in various application domains: from home use electronics (e.g., video processing) to complex critical control systems. On the other hand, the utilization of the resources has to be efficient in terms of performance and power consumption. However, the high level of on-chip integration results in the increase of the probability of various faults and creation of hotspots leading to thermal problems. Additionally, radiation, which is frequent in space but becomes an issue also at the ground level, can cause transient faults. This can eventually induce a faulty execution of applications. Therefore, it is crucial to develop methods that enable efficient as well as resilient execution of applications. The main objective of the thesis is to propose an approach to design agentbased systems for many-core platforms in a rigorous manner. When designing such a system, we explore and integrate various dynamic reconfiguration mechanisms into agents functionality. The use of these mechanisms enhances resilience of the underlying platform whilst maintaining performance at an acceptable level. The design of the system proceeds according to a formal refinement approach which allows us to ensure correct behaviour of the system with respect to postulated properties. To enable analysis of the proposed system in terms of area overhead as well as performance, we explore an approach, where the developed rigorous models are transformed into a high-level implementation language. Specifically, we investigate methods for deriving fault-free implementations from these models into, e.g., a hardware description language, namely VHDL.

Competence foresight: linking the identification of HR competences and competence management alignment with business strategy

The objective of this study was to increase understanding of the link between the identification of required HR competences and competence management alignment with business strategy in a Finnish, global company employing over 8,000 people and about 100 HR professionals. This aim was approached by analyzing the data collected in focus group interviews using a grounded theory method and in parallel reviewing the literature of strategic human resource management, competence-based strategic management, strategy and foresight. The literature on competence management in different contexts dismisses in-depth discussions on the foresight process and individuals are often forgotten in strategic frameworks. However, corporate foresight helps in the detection of emerging opportunities for innovations and in the implementation of strategy. The empirical findings indicate a lack of strategic leadership and an alignment with HR and business. Accordingly, the most important HR competence areas identified were the need for increasing business understanding and enabling change. As a result, the study provided a holistic model for competence foresight, which introduces HR professionals as strategic change agents in the role of organizational futurists at the heart of the company: facilitating competence foresight and competence development on individual as well as organizational levels, resulting in an agile organization with increased business understanding, sensitive sensors and adaptive actions to enable change.

Informal learning and competence development during a management trainee program

The purpose of this research was to study how management trainee program participants experienced the program with respect to their learning and competence development. Additionally, the purpose was also to examine what the trainees learned and how the learning occurred. Furthermore, factors affecting learning in the workplace were examined. The theoretical framework of this research was formed utilizing individual competence and informal learning frameworks. Research was conducted as a single case study and data was gathered by thematic interviews. The results of this research indicate that the trainees experienced the program as a good method for learning the overall picture of the organization and its business. Regarding competence development, especially knowledge- and cognitive competence categories were developed during the program. The best learning outcomes were achieved through learning by doing, in co-operation with others, and learning from others. The results indicate that the planning of the program and its structure have a significant effect on learning. Furthermore, a sufficient level of challenge was experienced as being important for the quality of the learning as well.

The role of network competence and international business competence in multinational corporations: Subsidiary perspective

On-going process of globalization makes companies all over the world to go beyond the national markets and internationalize. Organizational form of multinational corporation (MNC) has capabilities for establishing the affiliate companies in several countries. Thus, the relocation of resources occurs and particularly, the cross-border transfer of knowledge which possesses the competitive advantage. However, differences in countries` business environments and cultures may constrain this capability. The research aim of this thesis is to investigate the role of subsidiary’s network competence (ability to build and manage the relationships with other local business units) and international business competence in relation to the benefits that MNC receives from a subsidiary. Additionally, subsidiary’s business adaptation, partnerships and knowledge transfer mechanism with parent company and external partners are investigated. This research, conducted in the Finnish-Russian context, consists of theoretical and empirical parts. The qualitative approach in the form of multiple case studies is employed. The empirical data incorporated primary and secondary data in the form of interviews collected in 2013 and 2015 years. Interviews were collected from four Finnish case companies in Saint-Petersburg and Kaluga region and five Russian partner companies. Results are drawn from two cases from Saint-Petersburg. The abductive research approach for the results analysis is adopted. The results indicate that both competencies lead to the subsidiary’s local embeddedness in the form of mutual business activities with local business partners and product adaptation for the local market needs. In addition to the monetary benefits in form of payments or turnover share, local embeddedness brings the knowledge of the local environment which is utilized by an MNC in the long-term planning. Another found tacit benefit is the access to the national market. This is strategically useful benefit not only for parent MNC but also for the subsidiary’s partners, i.e. international suppliers.