Public-private partnership in marine litter waste management

Marine litter is an international environmental problem that causes considerable costs to coastal communities and the fishing industry. Several international and national treaties and regulations have provisions to marine litter and forbid disposal of waste into the sea. However, none of these regulations state a responsibility for public authorities to recover marine litter from the sea, like they do for marine litter that washes up on public beaches. In a financial evaluation of a value chain for marine litter incineration it was found out that the total costs of waste incineration are approximately 100 ─ 200 % higher than waste fees offered by waste contractors of ports. The high costs of incineration are derived from the high calorific value of marine litter and therefore a high incineration cost for the waste, and long distances between ports that are taking part in a project for marine litter recovery from the sea and an Energy-from-Waste (EfW) facility. This study provides a possible solution to diverting marine litter from landfills to more environmentally sustainable EfW use by using a public-private partnership (PPP) framework. PPP would seem to fit as a suitable cooperative approach for answering problems of current marine litter disposal in theory. In the end it is up to the potential partners of this proposed PPP to decide whether the benefits of cooperation justify the required efforts.

Dynamic Ownership in Family Business System – A Portfolio Business Approach

Family businesses are among the longest-lived most prevalent institutions in the world and they are an important source of economic development and growth. Ownership is a key to the business life of the firm and also one main key in family business definition. There is only a little portfolio entrepreneurship or portfolio business research within family business context. The absence of empirical evidence on the long-term relationship between family ownership and portfolio development presents an important gap in the family business literature. This study deals with the family business ownership changes and the development of portfolios in the family business and it is positioned in to the conversation of family business, growth, ownership, management and strategy. This study contributes and expands the existing body of theory on family business and ownership. From the theoretical point of view this study combines insights from the fields of portfolio entrepreneurship, ownership, and family business and integrate them. This crossfertilization produces interesting empirical and theoretical findings that can constitute a basis for solid contributions to the understanding of ownership dynamics and portfolio entrepreneurship in family firms. The research strategy chosen for this study represents longitudinal, qualitative, hermeneutic, and deductive approaches.The empirical part of study is using a case study approach with embedded design, that is, multiple levels of analysis within a single study. The study consists of two cases and it begins with a pilot case which will form a preunderstanding on the phenomenon. Pilot case develops the methodology approach to build in the main case and the main case will deepen the understanding of the phenomenon. This study develops and tests a research method of family business portfolio development focusing on investigating how ownership changes are influencing to the family business structures over time. This study reveals the linkages between dimensions of ownership and how they give rise to portfolio business development within the context of the family business. The empirical results of the study suggest that family business ownership is dynamic and owners are using ownership as a tool for creating business portfolios.

ESTABLISH & DEPLOY DOWNSTREAM MARKETING CAPABILITIES: a case study research following the framework implementation journey

According to many academic researches, the development of marketing capabilities can enhance organizational performance. Similarly, downstream marketing capabilities have an important role in accomplishment the organizational goals. Particularly the downstream marketing capabilities identified in this research are the Marketing Communication, Selling, Marketing implementation, and Market information management. These four capabilities are summarized under the following abilities. First, the ability to manage customers’ opinion regarding the offered value from the organization. Second, the ability of the organization to obtain orders from new and established customers. Third, the ability of aligning and translate the marketing strategy into an operating action plan along with the deployment of the organizational resources. Forth, the continuous process of gathering and managing information about the markets. Moreover, the literature review of this research shed light on the elements that compose the downstream marketing capabilities. Specifically, this research examined the downstream processes and the required information required to control these processes based on the American Productivity and Quality Center’s Process Classification Framework. Furthermore, the literature review examined some of the technological tools that are used in marketing processes, and also some managerial implication regarding the management of the downstream marketing employees. Along with the investigation of downstream marketing capabilities, the literature review investigated the utilization and the benefits of Component Business Model and Process Classification Framework, as they are defined by the organizations that developed them. Besides this initial study, the research presents how the examined organization is using the two frameworks together by cross-referring them. Finally, the research presents the optimal deployment of the collected downstream capabilities elements in the current organizational structure. The optimal deployment has been grounded on the information collected from the literature review but also from internal documentation, provided from the examined organization. By comparing the optimal deployment and the current condition on the organization, the research exhibits some points for improvement, but also some of the projects that are currently in progress inside the organization and eventually will provide solutions to these downsides.

Innovation Project Portfolio Management

Companies today are forced to innovate in order to remain within business. Such innovation projects undertaken by the companies are defined in this study as creative ideas which have been managed through “Stage-Gate” innovation process. This process is used to manage innovation projects as they proceed from being newly created to ready for launching/implementing. This has ensured that the companies manage the innovation project right. However, with so many new creative ideas the companies can come up within limited resources, the companies must rely on Innovation Project Portfolio Management (IPPM) to ensure that they are managing only the right innovation projects. Although, there are many tools and techniques available for use within Project Portfolio Management, there is still no consensus on which are the most effective and no standard framework has been established especially for IPPM. Thus, this study proposes a practical framework for which individual innovative organization can follow as a guideline to manage its innovation project portfolio. The study theoretically first addresses the key differences between project portfolio management of innovation projects and other traditional projects - one of which is the stage nature of innovation projects due to their unclear objectives from the beginning compare to clearly established objectives of traditional projects. Secondly, different tools and techniques which can be used are examined based on the three goals of IPPM: (1) Maximizing the Value of Innovation Project Portfolio: Financial Methods, Decision Trees, Scoring Models and Checklists; (2) Balancing Innovation Project Portfolio: Visual Representations; and (3) Aligning Innovation Project Portfolio with Strategy: Bottom-Up (Scoring Models with Strategic Criteria) and Top-Down (Strategic Buckets). Finally, the two approaches in which IPPM can be integrated with Stage-Gate innovation process are discussed: (1) Gates- Dominated; and (2) Portfolio Reviews-Dominated. Practically, this study investigates IPPM of a case organization, and through analysis of the case study results proposes a practical framework for case organization to improve its current management of innovation project portfolio. This framework is then generalized to propose a final practical framework or guideline for which an innovative organization can follow to manage its innovation project portfolio.

Key success factors and process for IT project portfolio management

The importance of Information Technology (IT) in the business environment is continuously growing. This stimulates the increase of size, complexity and number of IT projects and raises the need for IT Project Portfolio Management (IT PPM). While being actively discussed for the last few decades, IT PPM has a short history of practical implementation. This creates inconsistency in the views of different authors and provides an opportunity for additional research. As a first step, this research explores the existing studies and brings together the views of different authors on IT PPM. As a result, a high-level IT PPM Process Cycle and a set of Key Success Factors for IT PPM are proposed. IT PPM Process Cycle gives an overview of the main elements of IT PPM process, while the set of Key Success Factors provides a number of factors that should be considered during the implementation. As a second step, both theoretical deliverables are empirically tested by a case study and a survey conducted in a big multinational company. The case study is used to analyze process framework of the studied company towards the developed IT PPM Process Cycle. Subsequently, a survey was conducted among subject matter experts of the same company to evaluate the importance and relevance of the proposed Key Success Factors. Finally, this thesis concludes with findings made during the case study and provides an empirically tested selection of factors to be taken into account. These two deliverables can be used by both academics and practitioners to close the gaps in existing literature and assist in IT PPM implementation.

Promoting Customer Loyalty Through a Telecommunication Specific CRM Framework

The objective of this thesis is to find new methods to promote customer loyalty in the telecommunication industry. The study was made on the appointment of Tecnotree Corporation, which operates in a telecommunication software business. This thesis comprises of a theoretical section, which includes the presentation of relevant theoretical background and of an empirical section, which is mostly based on interviews and professional opinions. One of the most important aspects of customer relationship management (CRM) is building customer loyalty. Telecommunication markets are becoming saturated in an increasing number of markets. Customer acquisition is no longer a way to grow; companies need to hold on to their existing customers. Companies are always looking for new ways to avoid churning customers. These new methods are searched from recent studies and they are discussed with marketing professionals from operators. Current CRM lacks the ability to extract data efficiently from databases. Social media’s utilization is also in its early stages. It contains a lot of possibilities, but also things that can be risky for companies. In order to obtain full advantage of the new methods companies are required to invest considerable amounts of time and money to develop new systems, but not all companies are ready for the change.

Managerial decision-making style : India, Bangladesh, and Finland : cultural side of the game

Julkaisumaa Intia 356 IN IND

Theorizing Formal and Informal Feedback Practices in Management Accounting Through Three Dimensions

The purpose of this doctoral thesis is to widen and develop our theoretical frameworks for discussion and analyses of feedback practices in management accounting, particularly shedding light on its formal and informal aspects. The concept of feedback in management accounting has conventionally been analyzed within cybernetic control theory, in which feedback flows as a diagnostic or comparative loop between measurable outputs and pre-set goals (see e.g. Flamholtz et al. 1985; Flamholtz 1996, 1983), i.e. as a formal feedback loop. However, the everyday feedback practices in organizations are combinations of formal and informal elements. In addition to technique-driven feedback approaches (like budgets, measurement, and reward systems) we could also categorize social feedback practices that managers see relevant and effective in the pursuit of organizational control. While cybernetics or control theories successfully capture rational and measured aspects of organizational performance and offer a broad organizational context for the analysis, many individual and informal aspects remain vague and isolated. In order to discuss and make sense of the heterogeneous field of interpretations of formal and informal feedback, both in theory and practice, dichotomous approaches seem to be insufficient. Therefore, I suggest an analytical framework of formal and informal feedback with three dimensions (3D’s): source, time, and rule. Based on an abductive analysis of the theoretical and empirical findings from an interpretive case study around a business unit called Division Steelco, the 3Dframework and formal and informal feedback practices are further elaborated vis-á-vis the four thematic layers in the organizational control model by Flamholtz et al. (1985; Flamholtz 1996, 1983): core control system, organizational structure, organizational culture, and external environment. Various personal and cultural meanings given to the formal and informal feedback practices (“feedback as something”) create multidimensional interpretative contexts. Multidimensional frameworks aim to capture and better understand both the variety of interpretations and their implications to the functionality of feedback practices, important in interpretive research.

Research framework for the connection between environmental collaboration and firm performance

This thesis focuses on collaborative activities with regard to environmental issues both within the firm and outside the firm with the key suppliers and customers, i.e. internal and external environmental collaboration. Integrating environmental thinking into supply chain management has received increasing interest in recent years. The relational view and the natural resource-based-view together suggest that environmental capabilities can be built jointly with supply chain partners and used to gain sustained competitive advantage. Several studies have been undertaken to analyse the connection between environmental activities and firm performance but most studies have taken only economic performance into account. This study pays attention also to two other dimensions of firm performance, intra-firm supply chain performance and environmental performance, and aims at presenting the linkages between them and environmental collaboration. This thesis creates a research framework for the connections between environmental collaboration and firm performance and suggests approaches to analyse these. In order to find out the key concepts and their relationship, an extensive literature review is conducted. The research framework proposes a positive connection between internal and external environmental collaboration and all three dimensions of firm performance. In addition, environmental performance and intra-firm supply chain performance are expected to contribute positively to economic performance. Hence, firms are suggested to benefit from environmental collaboration both within the firm and outside the firm. Empirical testing of the developed research framework is out of the scope of this study. However, this thesis proposes using a mixed methods research approach, including survey research and multiple case studies. Finland State of Logistics 2012 survey commissioned by the Finnish Ministry of Transport and Communications and conducted by Turku School of Economics is used as an example of data for the quantitative phase. The applicability of these two methods is discussed at a general level and with regard to analysing the research framework developed in the thesis. Future research will aim at the development of the research framework and the methods in order to confirm the connection between environmental collaboration and firm performance.

Situational awareness concept in a multinational collaboration environment : challenges in the information sharing framework

Technological capabilities are built to support different types of collaboration, and this gives the justification to widely observe, how activity environments are influenced by technology. Technology as an enabler can be addressed from different perspectives, other than merely technological. Dynamic, evolving environment is at the same time interesting but also challenging. As a multinational collaboration environment, the maritime surveillance is an good example of time critical and evolving environment, where technological solutions enable new ways of collaboration. Justification for the inspiration to use maritime environment as the baseline for understanding the challenges in creating and maintaining adequate level of situational awareness, derives from the complexity of the collaboration and information sharing environment elements, needed to be taken into account, when analyzing criticalities related to decision making. Situational awareness is an important element supporting decision making, and challenges related to it can also be observed in the maritime environment. This dissertation describes the structures and factors involved in this complex setting, found from the case studies that should be taken into account when trying to understand, how these elements affect the activities. This dissertation focuses on the gray area that is between a life threatening situation and normal everyday activities. From the multinational experimentation series case studies, MNE5 and MNE6 it was possible to observe situations that were not life threatening for the participants themselves, but not also basic every day activities. These case studies provided a unique possibility to see situations, where gaining of situational awareness and decision making are challenged with time critical crisis situations. Unfortunately organizations do not normally take the benefit from the everyday work to prepare themselves for possible emerging crisis situations. This dissertation focuses on creating a conceptual model and a concept that supports organizations – also outside the maritime community – to improve their ability to support gaining of situational awareness from the individual training level, all the way to changes in organizational structures in aiming for better support for decision making from the individual level to the highest decision making level. Quick changes and unpredictability are reality in organizations and organizations do not have the possibility to control all the factors that affect their functioning. Since we cannot be prepared for everything, and predict every crisis, individual activities inside teams and as a part of organizations, need to be supported with guidance, tools and training in order to support acting in challenging situations. In fact the ideology of the conceptual model created, lies especially in the aim of not controlling everything in beforehand, but supporting organizations with concrete procedures to help individuals to react in different, unpredictable situations, instead of focusing on traditional risk prevention and management. Technological capabilities are not automatically solutions for functional challenges; this is why it is justified to broaden the problem area observation from the technological perspective. This dissertation demonstrates that it is possible to support collaboration in a multinational environment with technological solutions, but it requires the recognition of technological limitations and accepting the possible restrictions related to technological innovations. Technology should not be considered value per se, the value of technology should be defined according to the support of activities, including strategic and operational environment evaluation, identification of organizational elements, and taking into account also the social factors and their challenges. Then we are one step closer to providing technological solutions that support the actual activities by taking into account the variables of the activity environment in question. The multidisciplinary view to approach the information sharing and collaboration framework, is derived especially from the complexity of decision making and building of situational awareness, since they are not build or created in vacuity, but in the organizational framework by the people doing it with the technological capabilities, enabled by the organizational structures. Introduced case studies were related to maritime environment, but according to the research results, it is valid to argue, that based on the lessons learned it is possible to create and further develop conceptual model and to create a general concept to support a wider range of organizations in their attempt to gain better level of situational awareness (SA) and to support decision making. To proof the versatile usage of the developed concept, I have introduced the case study findings to the health care environment and reflected the identified elements from the trauma center to the created concept. The main contribution to complete this adventure is the presented situational awareness concept created in the respect to NATO concept structure. This has been done to tackle the challenge of collaboration by focusing on situational awareness in the information sharing context by providing a theoretical ground and understanding, of how these issues should be approached, and how these elements can be generalized and used to support activities in other environments as well. This dissertation research has been a several year evolving process reflecting and affecting presented case studies and this learning experience from the case studies has also affected the goals and research questions of this dissertation. This venture has been written from a retro perspective according to ideology of process modeling and design rationale to present to the reader how this entire journey took place and what where the critical milestones that affected the end result, conceptual model. Support in a challenging information sharing framework can be provided with the right type of combination of tools, procedures and individual effort. This dissertation will provide insights to those with a new approach to war technology for the organizations to gain a better level of awareness and to improve the capabilities in decision making. This dissertation will present, from the war technology starting point, a new approach and possibility for the organizations to create a better level of awareness and support for decision making with the right combination of tools, procedures and individual effort.

“THE PATIENT SURVIVED DESPITE THE TREATMENT”. A study of Finnish health policy and New Public Management. Case: The Government Resolution on the Health 2015 public health programme.

Internationally, Finland has been among the most respected countries during several decades in terms of public health. WHO has had the most significant influence on Finnish health policy and the relationship has traditionally been warm. However, the situation has slightly changed in the last 10-20 years. The objectives of Finnish national health policy have been to secure the best possible health for the population and to minimize disparities in health between different population groups. Nevertheless, although the state of public health and welfare has steadily improved, the socioeconomic disparities in health have increased. This qualitative case study will demonstrate why health is political and why health matters. It will also present some recommendations for research topics and administrative reforms. It will be argued that lack of political interest in health policy leads to absence of health policy visions and political commitment, which can be disastrous for public health. This study will investigate how Finnish health policy is defined and organised, and it will also shed light on Finnish health policy formation processes and actors. Health policy is understood as a broader societal construct covering the domains of different ministries, not just Ministry of Social Affairs and Health (MSAH). The influences of economic recession of the 1990s, state subsidy reform in 1993, globalisation and the European Union will be addressed, as well. There is not much earlier Finnish research done on health policy from political science viewpoint. Therefore, this study is interdisciplinary and combines political science with administrative science, contemporary history and health policy research with a hint of epidemiology. As a method, literature review, semi-structured interviews and policy analysi will be utilised. Institutionalism, policy transfer, and corporatism are understood as the theoretical framework. According to the study, there are two health policies in Finland: the official health policy and health policy generated by industry, media and various interest organisations. The complex relationships between the Government and municipalities, and on the other hand, the MSAH and National Institute for Health and Welfare (THL) seemed significant in terms of Finnish health policy coordination. The study also showed that the Investigated case, Health 2015, does not fulfil all necessary criteria for a successful public health programme. There were also several features both in Health 2015 and Finnish health policy, which can be interpreted in NPM framework and seen having NPM influences.

Strategic Innovation Management Based on Three Dimensions

This thesis examines innovation development needs of firms in a remote rural region. The perspective of the study is in strategic innovation management and three dimensions of innovation development: innovation environment, value delivery and innovation capability. The framework is studied with a theoretical and methodological approach in the context of the development of a regional innovation system and the defining of innovation development needs. The thesis is based on existing innovation management literature, expanding it by examining the features of the three dimensions. The empirical data of the study comprise 50 purposefully selected firms within the region of Pielinen Karelia located in Eastern Finland. Most of the firms (70%) included in the study represent manufacturing firms, and over 90% are small and medium-sized enterprises. The research data consist of two questionnaires and an interview, which were done during 2011 in the connection of a regional development project. The point of view of the research is in regional development and harnessing the innovation capability of the firms within the region. The principal research approach applies soft systems methodology. The study explores the means to foster the innovativeness of firms from the viewpoints of innovation environment, innovation capability and value delivery. In closer detail, the study examines relations between the innovation capability factors, differences in innovation development needs within the value delivery system, between sectors and between firm size categories. The thesis offers three major contributions. First, the study extends earlier research on strategic innovation management by connecting the frameworks of innovation capability, innovation environment and value delivery process to the defining of innovation development needs at the regional level. The results deepen knowledge especially concerning practice-based innovation, peripheral regions and smaller firms. Second, the empirical work, based on a case study, confirms the existence of a structural connection integrating five factors of innovation capability. Statistical evidence is provided especially for the positive impacts of the improvement of absorption capability, marketing capability and networking capability, which are the main weaknesses of firms according to the study. Third, the research provides a methodological contribution by applying the innovation matrix in the defining of the innovation development needs of firms. The study demonstrates how the matrix improves possibility to target policy instruments and innovation services more efficiently through indicating significant differences between the innovation support needs regarding various time horizons and phases of innovation process.

Improving Product Information Management in Global Project Based Manufacturing

The transition of project based manufacturing business, even more into global networks, sets up challenges for companies to manage their business in this new operating environment. One way to tackle these challenges is the successful management of product information through an extended product’s lifecycle. Thus, one objective of this research is to find ways how product information management in global project based manufacturing can be improved. Another objective is to find a solution how the target company can improve its product information management in the offer-to-procurement business process. Due to the nature of the topic, the study follows constructive research methodology with qualitative methods. By combining literature related to this topic a framework is created to improve product information management in global project based manufacturing. The improvement process in this framework is based on a systematic approach from the current state towards target state. A general aim for improvements should be the integrated product and project lifecycle information management through Lean approach. This introduced framework is applied to the target company through two case projects. Data for building view of current state and analysis is collected mostly by theme interviews and also utilizing other material from the target company. Used tools help to analyzing was the BPMN and the Trace matrix for business chains. Results of the improvement process are collected in a solution proposal which contain the strategic target state as well as long and short term objectives. The strategic target state is defined as controlled customization. Also during the improvement process are created the Information requirements chart in the offer-to-procurement business process, and the Project related initial information questionnaire to customer.

The key practices of customer portfolio management (CPM) process in the medical and healthcare B2B industry

The goal of this study is to deepen the understanding of the customer portfolio management process. There are many models for the process, and they are not necessarily exclusive of each other. Consequently, the inclusion of many models might even prove out to be beneficial. Other theoretical framework include the current economical situation and its propose on customer portfolio management. With an understanding of the theoretical models as a background, the empirical part of this study compares Finnish multinational medical and healthcare technology companies’ customer portfolio management practices. The empirical research was carried out with theme interviews held with 11 sales and marketing managers or directors from four different companies. The goal was to discover the most essential practices of the process steps in the companies. The result of this study is that there is a lack of systematic customer portfolio management, but most companies are aiming to improve this in the near future. The most essential practices are analysis of sales, communication level, learning, and commitment to strategy of the focal company. Special characteristics of this industry include large business networks that include customers, professional end-users, institutions, universities, researchers, and key opinion leaders. The management and analysis of this comprehensive network has been seen to be extremely important for this industry.

Licensing Model Development for Small Modular Reactors (SMRs) - Focusing on the Finnish Regulatory Framework

Recently, Small Modular Reactors (SMRs) have attracted increased public discussion. While large nuclear power plant new build projects are facing challenges, the focus of attention is turning to small modular reactors. One particular project challenge arises in the area of nuclear licensing, which plays a significant role in new build projects affecting their quality as well as costs and schedules. This dissertation - positioned in the field of nuclear engineering but also with a significant section in the field of systems engineering - examines the nuclear licensing processes and their suitability for the characteristics of SMRs. The study investigates the licensing processes in selected countries, as well as other safety critical industry fields. Viewing the licensing processes and their separate licensing steps in terms of SMRs, the study adopts two different analysis theories for review and comparison. The primary data consists of a literature review, semi-structured interviews, and questionnaire responses concerning licensing processes and practices. The result of the study is a recommendation for a new, optimized licensing process for SMRs. The most important SMR-specific feature, in terms of licensing, is the modularity of the design. Here the modularity indicates multi-module SMR designs, which creates new challenges in the licensing process. As this study focuses on Finland, the main features of the new licensing process are adapted to the current Finnish licensing process, aiming to achieve the main benefits with minimal modifications to the current process. The application of the new licensing process is developed using Systems Engineering, Requirements Management, and Project Management practices and tools. Nuclear licensing includes a large amount of data and documentation which needs to be managed in a suitable manner throughout the new build project and then during the whole life cycle of the nuclear power plant. To enable a smooth licensing process and therefore ensure the success of the new build nuclear power plant project, management processes and practices play a significant role. This study contributes to the theoretical understanding of how licensing processes are structured and how they are put into action in practice. The findings clarify the suitability of different licensing processes and their selected licensing steps for SMR licensing. The results combine the most suitable licensing steps into a new licensing process for SMRs. The results are also extended to the concept of licensing management practices and tools.