Value added logistical support service: logistics cost structure and performance in the new concept. Part 3

The aim of this study is to present an Activity-Based Costing spreadsheet tool for analyzing the logistics costs. The tool can be used both by customer-companies and logistics service providers. The study discusses the influence of different activity models on costs. Additionally this paper discusses about the logistical performance across the total supply chain This study is carried out using ananalytical research approach and literature material has been used for supplementing the concerned research approach. Cost structure analysis was based on the theory of activity-based management. This study was outlined to spare part logistics in machine-shop industry. The outlines of logistics services and logisticalperformance discussed in this report are based on the new logistics business concept (LMS-concept), which has been presented earlier in the Valssi-project. Oneof the aims of this study is to increase awareness of different activity modelson logistics costs. The report paints an overall picture about the business environment and requirements for the new logistics concept.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Tehdaslogistiikka : value added logistics of the supply and demand chain costfix

VALOSADE (Value Added Logistics in Supply and Demand Chains) on Lappeenrannan teknillisen yliopiston ja sielläprofessori Anita Lukan VALORE -tutkimusryhmän toteuttama tutkimusprojekti, jonka rahoittaja on ollut Tekes. Projekti on osa Tekesin ELO - Elektronisen liiketoiminnan logistiikka - teknologiaohjelmaa. Tutkimusta rahoittivat Tekesin lisäksi neljä yritystä, jotka toimivat myös tutkimustyön kohteina ja toimivat tarpeen mukaan yhteistyössä tutkijoiden kanssa. Yritysten toimialat ovat metsäteollisuus, laitevalmistaja, joka tarjoaa myös tuotteilleen jälkimarkkinapalveluja sekä kaksi logistiikkapalveluyritystä. Tämä työraportti liittyy VALOSADE - tutkimusprojektin osaprojektiin Costfix (Paper Mill Process - from Fixed Costs into Variable Costs). Costfix - projektin tavoitteena on tutkia ja löytää paperiteollisuudelle uusia toimintamalleja, jotka mahdollistavat kiinteiden kustannusten muuttamisen muuttuviksi. Merkittävä tutkimuksen osa-alue on myös tutkimuskohteiden liike-toiminnan nykytilan aiempaa tarkempi selvittäminen. Tämä työraportti käsittelee kunnossapidon materiaalilogistiikan osalta tehtaan sisällä tapahtuvaa toimintaa, josta tässä tutkimuksessa käytetään nimitystä tehdaslogistiikka. Nykytilaselvityksen perusteella nykyinen prosessiteollisuudessa ja myös pääsääntöisesti valmistavassa teollisuudessa yleisesti vallitseva teollisuusyrityksen käyttöinvestointia ylläpitävän palveluprosessin toimintarakenne, johtamistapa ja prosessin operatiivisten tehtävien toimenkuvat eivät tue ko. palvelukokonaisuuden tehokasta ja tuloksellista toteuttamista. Nykymuotoinen toimintamalli pikemminkin rajoittaa toimintaprosessin kokonaishallintaa ja sen tehostamiseksi investoitujen uusien teknisten ratkaisujen ja teknologian käyttöönottoa. Lisäksi yleisesti vallitseva toimintakulttuuri (mm. arvokäsitykset, uskomukset sekä toiminnan ja tavoitteiden taustalla olevat motiivit) sekä vaikeuttaa nykyisen ja tulevan kilpailutilanteen edellyttämien tehokkuus- ja tuottavuustavoitteiden toteutumista että hidastaa uudistusten onnistumista edellyttävän muutoksen etenemistä yrityksen sisällä. Tutkimuksen tulokset vahvistivat osaltaan sen, että tehdas- ja toimintokeskeinen johtaminen aiheuttavat palveluprosessin eri tehtäville asetettujen tavoitteiden ja perustehtäväkäsityksen välille ristiriitoja, joista seuraa sekä suoria että välillisiä vaikutuksia teollisuusyrityksen tuotantoprosessin toiminnan laatuun ja tuotantolaitteiden käyttövarmuuteen. Palvelukokonaisuuteen kuuluvien eri toimintaprosessien tehtävät on jaettu ristiriitaisesti toiminnoille siten, että erityisestikunnossapidon teknisten toimihenkilöitten hoidettavana on sekä ihmisen henkilökohtaisen kapasiteettirajan ylittävä että toisistaan liian suuri erilaisia osaamisia ja ymmärrystä edellyttävä tehtävämäärä. Nykytilan palvelutuotannossa esiintyvien ongelmien seuraukset ja perussyyt osoittavat, että merkittävästi pääomia sitovan valmistavan teollisuuden (mm. prosessiteollisuus) käyttö-omaisuutta ylläpitävän palveluprosessin hallinta on ulkoistettava tehdastasolta itsenäisesti hoidettavaksi liiketoimintakokonaisuudeksi, jonka operatiivinen johtaminen tapahtuu toimintaprosesseittain konsernin ylätasolta käsin. Johtamismallissa painottuu prosessijohtaminen ja oman vastuualueen toimintaprosessin asiantuntemus. Lisäksi ihmisen osaamiseen, ymmärrykseen ja toimintatapaan perustuva palvelu edellyttää johtamiselta henkilöjohtamistaitoa ja osaamisen johtamista. Liiketoiminnan uudenlainen keskittyminen, verkostoituminen ja globalisoituminen edellyttävät johdoltamyös erilaisten toimintaverkostojen ja sidosryhmien toiminnan ja tarpeen ymmärtämistä. Tutkimustulosten perusteella myös palveluprosesseissa toimivien toimihenkilöitten tehtäväkuvia on muutettava radikaalisti ja osa uusista toimenkuvista edellyttää lisäksi henkilöitten osaamistason aktiivista parantamista. Tässä raportissa esitetään toimintamalli, jossa kuvataan tutkimuksen pohjalta luotu palvelukokonaisuuden johtamismalli ja palveluprosessien eri tehtävätasot tehtävineen. Kuvattu johtamismalli on ollut jo yleisesti käytössä yksittäisillä palvelualoilla, mutta tässä esitetty malli on valmistavan yrityksen teknisiin tukipalveluihin muokattu sovellus.

The value of future opportunities: comparison of information technology firms and forest companies

There are several alternatives for valuing the future opportunities of firms. The traditional appraisal methods for single projects such as net present value, internalrate of return and payback rules have been criticized in recent years. It has been said that they do not take into account all growth opportunities of firms. At the company level, business valuation is traditionally based on financial and market information. Yield estimates, net worth values and market values of shares are commonly used. Naturally, all valuation methods have their own strengths and shortcomings. In the background of most estimation rules there is the idea that the future of the firms is quite clear and predictable. However, in recent times the business environment of most companies has changed to a more unpredictable direction and the effects of uncertainty have increased. There has been a growing interest in estimating the risks and values of future possibilities. The aim of the current paper is to describe the difference between the value of futureopportunities in information technology firms and forest companies, and also toanalyse the backgrounds for the observed gap.

Value added logistical support service Part 2. Outsourcing process of spare part logistics in metal industry

The aim of this research study was to find out guidelines for outsourcing of logistics processes. The study was outlined to spare parts and `business-to-business' (B2B) markets in metal industry. This study can be applied as a manual for outsourcing especially warehousing and transportation activities. The study also touches other important areas of spare part logistics like manufacturing, customer service, procurement, quality control, reverse and recycling logistics, logistics technologies and valueadded services. The method of study consisted of three areas. Firstly exchanging views with logistics experts in participating companies, and secondly compiling material based on author's practical experience in logistics business with several international and domestic logistics service providers and vendors. Thirdlythe study includes also references to literature material. Due to the fact thatthe outsourcing of logistics functions can be handled widely and from differentpoint of views, in this study it is concentrated mainly on giving general levelguidelines for defining logistics strategy, hints both for tendering process and implementation project, and not forgetting the aftercare of business partnership.

Value added logistical support service: logistiikan palveluiden tarjoajat Suomessa. osa 4

Tämä osatutkimus on VALSSI- tutkimusprojektin (Value Added Logistical Support Service) neljäs osavaihe. VALSSI- tutkimuksen tarkoituksena on ollut selvittää logistiikkapalveluiden vaatimuksia business-to-business (B2B) ympäristössä ja määrittää logistiikkapalveluiden palvelukonsepti, jossa perinteiset logistiikkapalvelut on laajennettu tuotannollisilla ja lisäarvoa tuottavilla palveluilla. Tutkimuksen tarkoituksena on ollut tuottaa ulkoistamista helpottavaa materiaalia erityisesti varastoinnin ja kuljetusten osalta. Edellisistä osavaiheista on saatavilla tutkimusraportit yliopiston Internet-sivuilta(www.lut.fi/tutkimus/valore). Tämän tutkimuksen tarkoituksena oli kartoittaa Suomessa toimivien logistiikkapalveluyritysten palvelutarjonta. Tutkimus on keskittynyt palveluntarjoajiin, jotka tarjoavat erikoistunutta logistiikkaa (mm. tuotannollisia palveluita, hankintoja ja pakkauspalveluita) asiakkailleen. Tutkimukseen osallistuneet yritykset olivat suomalaisia ja kansainvälisiä sekä kuljetuspalveluita tarjoavia että logistiikkapalveluyrityksiä sekä alihankkijoina/tukkureina toimivia palveluntarjoajia. Huomionarvoista onkin, että moni yrityksistä käytti markkinoilta saatavia kuljetuspalveluita eikä toiminut itse kuljetusoperaattorina. Logistiikkapalveluyrityksissä huomattiin eroavaisuuksia asiakaspalvelun laajuudessa, ICT strategioissa, hankintojen ja kotiinkutsujen organisoinnissa, tuotannollisissa palveluissa sekä paluulogistiikassa. Varsinaiset varastointipalvelut ovat homogeenisia ja varastointiin liittyvät pakkaamispalvelut ovat pääasiassasamankaltaisia. Markkinoilla toimivien tukkukauppiaiden logistiikkaprosessit eroavat perinteisistä palveluntarjoajista. Tukkurit hoitavat laajasti mm. asiakaspalvelua, teknistä tukea sekä erikoistuneita tuotannollisia palveluita. Nykypäivänä asiakkaat asettavat enemmän vaatimuksia logistiikkapalveluyrityksen prosesseille ja prosessien johtamiselle. Tulevaisuudessa Suomessa ja maailmalla toimivat logistiikkapalveluyritykset tulevat toimimaan yhteistyöverkoissa Itä- Euroopan maat ovat entistä suuremmassa roolissa uusia jakelukanavia ja palveluita mietittäessä. Jo nyt on huomattavissa, että asiakkaat vaativat logistiikan palvelutarjoajia tarjoamaan entistä monipuolisempia ja tuotteistetumpia palveluita.

Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

Numerical and ExperimentalModelling of Gas Flow and Heat Transfer in the Air Gap of An Electric Machine

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Value Processingin Organizations - Individual Perceptions in Three Case Companies

Values and value processes are said to be needed in every organization nowadays, as the world is changing and companies have to have something to "keep it together". Organizational values, which are approvedand used by the personnel, could be the key. Every organization has values. But what is the real value of values? The greatest and most crucial challenge is the feasibility of the value process. The main point in this thesis is tostudy how organizational members at different hierarchical levels perceive values and value processes in their organizations. This includes themes such as how values are disseminated, the targets of value processing, factors that affect the process, problems that occur during the value implementation and improvements that could be made when organizational values are implemented. These subjects are studied from the perspective of organizational members (both managers and employees); individuals in the organizations. The aim is to get the insider-perspective on value processing, from multiple hierarchical levels. In this research I study three different organizations (forest industry, bank and retail cooperative) and their value processes. The data is gathered from companies interviewing personnel in the head office and at the local level. The individuals areseen as members of organizations, and the cultural aspect is topical throughout the whole study. Values and cultures are seen as the 'actuality of reality' of organizations, interpreted by organizational members. The three case companies were chosen because they represented different lines of business and they all implemented value processing differently. Sincethe emphasis in this study is at the local level, the similar size of the local units was also an important factor. Values are in 'fashion' -but what does the fashion tell us about the real corporate practices? In annual reports companies emphasize the importance and power of official values. But what is the real 'point' of values? Values are publicly respected and advertised, but still it seems that the words do not meet the deeds. There is a clear conflict between theoretical, official and substantive organizational values: in the value processing from words to real action. This contradiction in value processing is studied through individual perceptions in this study. I study the kinds of perceptions organizationalmembers have when values are processed from the head office to the local level: the official value process is studied from the individual's perspective. Value management has been studied more during the 1990's. The emphasis has usually been on managers: how they consider the values in organizations and what effects it has on the management. Recent literature has emphasized values as tools for improving company performance. The value implementation as a process has been studied through 'good' and 'bad' examples, as if one successful value process could be copied to all organizations. Each company is different with different cultures and personnel, so no all-powerful way of processing values exists. In this study, the organizational members' perceptions at different hierarchical levels are emphasized. Still, managers are also interviewed; this is done since managerial roles in value dissemination are crucial. Organizational values cannot be well disseminated without management; this has been proved in several earlier studies (e.g. Kunda 1992, Martin 1992, Parker 2000). Recent literature has not sufficiently emphasized the individual's (organizational member's) role in value processing. Organizations consist of differentindividuals with personal values, at all hierarchical levels. The aim in this study is to let the individual take the floor. Very often the value process is described starting from the value definition and ending at dissemination, and the real results are left without attention. I wish to contribute to this area. Values are published officially in annual reports etc. as a 'goal' just like profits. Still, the results/implementationof value processing is rarely followed, at least in official reports. This is a very interesting point: why do companies espouse values, if there is no real control or feedback after the processing? In this study, the personnel in three different companies is asked to give an answer. In the empirical findings, there are several results which bring new aspects to the research area of organizational values. The targets of value processing, factors effecting value processing, the management's roles and the problems in value implementation are presented through the individual's perspective. The individual's perceptions in value processing are a recurring theme throughout the whole study. A comparison between the three companies with diverse value processes makes the research complete

Ash Particle Erosion on Steam Boiler Convective Section

In this study, equations for the calculation of erosion wear caused by ash particles on convective heat exchanger tubes of steam boilers are presented. Anew, three-dimensional test arrangement was used in the testing of the erosion wear of convective heat exchanger tubes of steam boilers. When using the sleeve-method, three different tube materials and three tube constructions could be tested. New results were obtained from the analyses. The main mechanisms of erosionwear phenomena and erosion wear as a function of collision conditions and material properties have been studied. Properties of fossil fuels have also been presented. When burning solid fuels, such as pulverized coal and peat in steam boilers, most of the ash is entrained by the flue gas in the furnace. In bubbling andcirculating fluidized bed boilers, particle concentration in the flue gas is high because of bed material entrained in the flue gas. Hard particles, such as sharp edged quartz crystals, cause erosion wear when colliding on convective heat exchanger tubes and on the rear wall of the steam boiler. The most important ways to reduce erosion wear in steam boilers is to keep the velocity of the flue gas moderate and prevent channelling of the ash flow in a certain part of the cross section of the flue gas channel, especially near the back wall. One can do this by constructing the boiler with the following components. Screen plates can beused to make the velocity and ash flow distributions more even at the cross-section of the channel. Shield plates and plate type constructions in superheaters can also be used. Erosion testing was conducted with three types of tube constructions: a one tube row, an inline tube bank with six tube rows, and a staggered tube bank with six tube rows. Three flow velocities and two particle concentrations were used in the tests, which were carried out at room temperature. Three particle materials were used: quartz, coal ash and peat ash particles. Mass loss, diameter loss and wall thickness loss measurements of the test sleeves were taken. Erosion wear as a function of flow conditions, tube material and tube construction was analyzed by single-variable linear regression analysis. In developing the erosion wear calculation equations, multi-variable linear regression analysis was used. In the staggered tube bank, erosion wear had a maximum value in a tube row 2 and a local maximum in row 5. In rows 3, 4 and 6, the erosion rate was low. On the other hand, in the in-line tube bank the minimum erosion rate occurred in tube row 2 and in further rows the erosion had an increasing value, so that in a six row tube bank, the maximum value occurred in row 6.

Composition, digestibility and nutritive value of cereals for dogs

Selostus: Kypsennettyjen viljojen sulavuus ja ravitsemuksellinen arvo koirien ruokinnassa

BUSINESS CONCEPTS OF MOBILE VALUE-ADDED SERVICES FROM OPERATOR’S POINT OF VIEW

Tämä diplomityö on tehty Lappeenrannassa Telecom Business Research Centerin 5T-projektiin liittyen. Työssä tutkitaan matkaviestinnän lisäarvopalveluiden liiketoimintakonsepteja operaattoreiden näkökulmasta. Lisäarvopalvelut laajentavat operaattoreiden palveluvalikoimaa. Niiden osuuden telekommunikaatioalan yritysten ja erityisesti operaattoreiden tuotoista on ennustettu kasvavan huomattavasti. Työn tärkeimpänä tavoitteena on tuoda uusia näkökulmia ja lisätä ymmärrystä lisäarvopalveluiden liiketoimintakonseptin rakentamisprosessista. Tätä tietämystä käytetään edesauttamaan työn empiirisessä osuudessa tutkitun Content Gateway -tuotteen liiketoimintaa. Tarjoamalla nopean liitynnän ja laskutuskanavan ulkopuolisten palveluntarjoajien ja operaattorin välille tämä tuote mahdollistaa operaattorille ja palveluntarjoajille lisäarvopalveluiden liiketoiminnan käynnistämisen. Lisäarvopalveluiden arvonluontiprosessi vaatii lukuisia yhteistyötä tekeviä osapuolia, joiden yhteistoiminta on dynaamista ja tiedonvälitys avointa, interaktiivista ja nopeaa. Arvonluontiin liittyy myös monia konvergoituvia kehityssuuntia. Perinteinen arvoketjuajattelu on riittämätön uuteen, verkottuneeseen toimintaympäristöön ja sen tilalle on tullut modernimpi arvoverkostomalli. Arvoverkosto luo kilpailuetunsa muita verkostoja vastaan jakamalla resurssit ja kompetenssit optimaalisesti ja liittämällä strategisen ja operationaalisen johtamisen kulttuurit toisiinsa. Tässä työssä verrataan arvoverkoston teoreettisia tavoitteita kahteen lisäarvopalveluiden liiketoimintakonseptiin. Näistä ensimmäinen, i-mode –niminen konsepti on valittu vertailuun edistyksellisyytensä ja tulevaa kehitystä ennakoivien ominaispiirteidensä vuoksi. Toinen esimerkkikonsepti on rakennettu edellä mainitun Content Gateway -tuotteen ympärille. Tutkimus sisältää mm. liikekumppaneiden hankinnan, ansaintalogiikoiden ja verkostojen johtamisen analysoinnin. Työn tuloksena on saatu ohjeita siihen, miten operaattori voi rakentaa tällaista konseptia ja mitä seikkoja tulee ottaa huomioon erityisesti sanomapalveluihin liittyvässä liiketoiminnassa.

Mobile E-commerce business model – A value web based approach to business models in mobile gaming industry

Tämän tutkimuksen tavoitteena oli tutkia langattomien internet palveluiden arvoverkkoa ja liiketoimintamalleja. Tutkimus oli luonteeltaan kvalitatiivinen ja siinä käytettiin strategiana konstruktiivista case-tutkimusta. Esimerkkipalveluna oli Treasure Hunters matkapuhelinpeli. Tutkimus muodostui teoreettisesta ja empiirisestä osasta. Teoriaosassa liitettiin innovaatio, liiketoimintamallit ja arvoverkko käsitteellisesti toisiinsa, sekä luotiin perusta liiketoimintamallien kehittämiselle. Empiirisessä osassa keskityttiin ensin liiketoimintamallien luomiseen kehitettyjen innovaatioiden pohjalta. Lopuksi pyrittiin määrittämään arvoverkko palvelun toteuttamiseksi. Tutkimusmenetelminä käytettiin innovaatiosessiota, haastatteluja ja lomakekyselyä. Tulosten pohjalta muodostettiin useita liiketoimintakonsepteja sekä kuvaus arvoverkon perusmallista langattomille peleille. Loppupäätelmänä todettiin että langattomat palvelut vaativat toteutuakseen useista toimijoista koostuvan arvoverkon.

The Value System of Consumer Board Packaging

Olemassa olevien teollisuuden rakenteiden ja arvoketjujen muutos on usein onnistuneiden liiketoimintainnovaatioiden takana. Yritysten tulisikin olla tietoisia rakenteista, jotka määrittelevät arvon jakaantumista niiden arvoketjuissa. Tämän työn tavoitteena oli tutkia ja arvioida kartongin pakkausketjujen rakenteita kartongintuottajalta aina kauppiaalle asti. Työn kuluessa yritysketjujen arviointia varten oli kehitettävä uudenlainen analysointityökalu. Työssä käsitellyt kartonkipakkausketjut olivat nestekartonkipakkaaminen, elintarvikepakkaaminen, lääkepakkaaminen sekä graafisten kartonkien ketju. Jokaista edellä mainituista ketjuista arvioitiin käyttämällä kehitettyä analysointityökalua. Työn merkittävin tulos on kehitetty työkalu, jolla pakkausketjuja sekä myös muita yritysketjuja on mahdollista analysoida. Kehitettyä työkalua käyttämällä oli mahdollista tehdä johtopäätöksiä vertikaalin integraation mahdollisuudesta sekä pakkausketjujen suotuisuudesta uusille bisnesmalleille. Sekä analysointityökalua että saatuja johtopäätöksiä voidaan käyttää hyväksi, kun kartongintuottaja suunnittelee tulevaisuuden toimenpiteitä.