Comparison of Compound Lean Nozzles and Controlled Flow Nozzles at Off-Design

Turbokoneet ja etenkin höyryturbiinit ovat usein suunniteltu ja optimoitu toimimaan tietyssä toimintapisteessä jossa häviöt on minimoitu ja hyötysuhde maksimoitu. Joissakin tapauksissa on kuitenkin tarpeellista käyttää turbiinia toimintapisteen ulkopuolella. Tällöin turbiinin läpi virtaava massavirta muuttuu ja yleensä heikentää hyötysuhdetta. Turbokoneiden suorituskykyä voidaan parantaa käyttämällä kolmidimensionaalisesti muotoiltuja siipiä. Työssä on vertailtu laskennallisesti kahta kohtuullisesti muotoiltua suutinta (Compound lean ja Controlled flow) niiden suunnitellun toimintapisteen ulkopuolella. Kolmas suutin, ilman kolmidimensionaalista muotoilua on mukana vertailukohteena. Suutinten suorituskykyä tutkitaan laskennallisen virtausmekaniikan avulla olosuhteissa, jotka ovat toimintapisteen ulkopuolella. Virtauksen muutoksia tutkitaan kokonaispainehäviön, isentrooppisen hyötysuhteen ja virtauspinnan yhdenmukaisuuden avulla. Virtauspintoja verrataan ulosvirtauskulman, massavirran ja toisiovirtausvektoreiden jakauman avulla. Erot suutinten suorituskykyvyssä korostavat ylikuormalla. Kun massavirran arvoa on kohotettu eniten, Compound lean suuttimilla hyötysuhde laskee Controlled flow suuttimeen verrattuna vähemmän. Alikuormalla, kun massavirran arvoa lasketaan, erot suuttimien suorituskyvyssä pienenevät ja tutkittujen suuttimien ulosvirtaus on samankaltainen.

Menestysmittariston kehittäminen Osuuspankkiryhmässä

Työn tavoitteena oli syy-seuraussuhteiden selvittäminen osuuspankkien uudessa tasapainotetussa menestysmittaristossa sekä mittaristokokonaisuuden arvioiminen ja mahdollisten kehitysehdotusten esittäminen. Lisäksi tavoitteena oli pankkitasoa alemmille seurantatasoille sopivien menestysmittareiden kehittäminen. Taustaksi soveltavalle osalle työssä tarkastellaan suorituskykymittaristojen roolia osana toiminnan ohjausta ja strategista johtamista. Suorituskykymittaristoista nostetaan esille tasapainotettu mittaristo, muut toiminnan ohjauksen välineet jätetään tutkimuksen ulkopuolelle. Syy-seuraussuhteet esitetään vuokaaviona. Suurin osa esitetyistä syy-seuraussuhteista perustuu rationaaliseen päättelyyn, minkä lisäksi joidenkin mittareiden välisiä yhteyksiä on tutkittu yksinkertaisen regressioanalyysin avulla. Mittaristokokonaisuuden arvioinnin yhteydessä esille nostettuihin kehittämistarpeisiin pyritään vastaamaan määrittelemällä uusi tunnusluku - asiakkuuden kokonaisarvo - joka yhdistää talous- ja asiakasnäkökulman mittaamisen osuuspankkien menestysmittaristossa. Alempien organisaatiotasojen menestysmittareiden kehittämisen osalta rajoitutaan mittareihin, jotka voisivat toimia menestysmittareina kaikissa osuuspankeissa. Niiden muodostamiseen otetaankin kantaa lähinnä periaatteellisella tasolla.

Strategic supply lead time management. Case Nokia Networks, Hardware Services

Teollisuuden palveluiden on huomattu olevan potentiaalinen lisätulojen lähde. Teollisuuden palveluiden dynaamisessa maailmassa räätälöinti ja kyky toimia nopeasti ovat kriittisiä asiakastyytyväisyyden ja kilpailuedun luomisprosessin osia. Toimitusketjussa käytetyn ajan lyhentämisellä voidaan saavuttaa sekä paremmat vasteajat, että alhaisemmat kokonaiskustannukset. Tutkielman tavoitteena on kuvata teollisuuden palveluiden dynaamista ympäristöä: asiakastarvetta, sekä mahdollisuuksia kaventaa pyydetyn ja saavutetun toimitusajan välistä eroa. Tämä toteutetaan pääosin strategisen toimitusajan hallinnan keinoin. Langattomien tietoliikenneverkkojen operaattorit haluavat vähentää ydinosaamiseensa kuulumatomiin toimintoihin, kuten ylläpitoon sitoutuneita pääomia. Tutkielman case osiossa varaosapalvelujen toimitusketjun kysyntä-, materiaali- ja informaatiovirtoja analysoidaan niin kvalitatiivisten haastatteluiden, sisäisten dokumenttien, kuin kvantitatiivisten tilastollisten menetelmienkin avulla. Löydöksiä peilataan vallitsevaa toimitusketjun ja ajanhallinnan paradigmaa vasten. Tulokset osoittavat, että vahvan palvelukulttuurin omaksuminen ja kokonaisvaltainen toimitusketjun tehokkuuden mittaaminen ovat ajanhallinnan lähtökohtia teollisuuden palveluissa.

Reporting for account and sales management

Tutkimuksen tavoitteena oli kerätä Elcoteq Network Oyj:n myyntihenkilöiden tietotarpeet ja konkretisoida ne raportoinnin kautta. Tutkimus keskittyi asiakasvirran eri vaiheissa tarvittavaan asiakas- ja projektikohtaiseen tietoon. Tarkoituksena oli parantaa raportointia vastaamaan asiakkaan ja sales case:n hallintaa alkaen asiakasvirran uusasiakasvaiheesta ja projektin arvioinnista. Tietotarpeet kerättiin haastattelujen avulla ja osallistumalla aiheeseen liittyviin projekteihin. Haastattelujen ja teorian avulla projektiliiketoiminnan avainpiirteet ja asiakaskannattavuuteen vaikuttavat tekijät kerättiin yhteen ja muutettiin konkretiaksi raportoinnin parannusehdotuksien kautta. Tutkimus osoitti, että myyntihenkilöiden näkökulmasta olisi muodostettava uudet raportit tukemaan asiakkaan ja projektin hallintaa. Ennustettu voidaan verrata toteutuneeseen ja sekä asikkuuden, että sales case:n seuranta paranee uusien raporttien avulla. Budjetit, sekä asiakaskohtaiset tavoitteet voidaan laatia luotettavimmin ja kokonaiskuva asiakkuuden ja projektin kannattavuudesta pystytään näkemään ko. raporteista sekä graafein, että numeerisena tietona.

Utilisation of Short Term Electricity Derivatives in Industrial Energy Management

Työn päätavoite on selvittää kuinka erityisesti sähkön markkinahinnan ennustamiseen ja johdannaismarkkinoiden tietämykseen perustuva lyhyen tähtäimen sähköjohdannaisten hyödyntäminen tapahtuu teollisessa energianhallinnassa. Tätä aihetta lähestytään luomalla prosessi lyhyen tähtäimen sähköjohdannaisten hyödyntämiselle. Prosessi esitellään ja selvitetään aina lähtökohdista todelliseen kaupankäyntiin asti erillisen esimerkkitehtaan avulla.Lyhyen tähtäimen sähköjohdannaisten hyödyntäminen teollisessa energianhallinnassa perustuu pääosin tulevaisuuden odotuksiin sähkön markkinahinnan kehittymisestä sekä tehtaiden operatiiviseen tilanteeseen. Operatiiviseen tilanteeseen perustuva lyhyen tähtäimen sähköjohdannaisten kaupankäynti on pääasiassa pitkän tähtäimen suojausten sopeuttamista lyhyelle tähtäimelle sopivaksi.Hinnan ennustamisella on suuri rooli lyhyen tähtäimen sähköjohdannaisten hyödyntämisprosessissa. Työssä esitelty hinnan ennustamismalli on sopiva päivä- ja viikkotason Nord Poolin Elspot -systeemihinnan ennustamiseen. Elspot -systeemihinnan ennustamismalli on suunniteltu käytännönläheiseksi ja sen perustana ovat todelliset fysikaaliset ja mitattavat suureet. Futuurimarkkinatietämys on tarpeen lyhyen tähtäimen johdannaisia käytettäessä. Työssä tutkitaan yleisiä markkinoiden odotuksia ja futuurimarkkinoiden tietoisuuden kehittymistä koskien tulevaa vallitsevaa tilannetta. Työssä luodaan myös työkalu, mikä auttaa kaupan laatijaa muodostamaan suuntaa-antavat todennäköisyydet eri hintanäkemyksille ja paikallistamaan mahdolliset markkinoiden epätodennäköiset hintaodotukset.Kokemukset Elspot -systeemihinnan ennustamismallin soveltamisesta ovat lupaavia. Lisäksi havainnot futuurimarkkinoiden käyttäytymisestä Nord Poolissa ja muodostettu työkalu suuntaa-antavien todennäköisyyksien selvittämiseksi auttavat kaupan laatijaa päätöksenteossa. Lyhyen tähtäimen sähköjohdannaisten hyödyntäminen teollisessa energianhallinnassa on periaatteessa mahdollista esitellyn prosessin avulla, vaikka täydellinen käyttöönotto vaatisi vielä joitakin järjestelyjä. Keskittymällä tilanteisiin jotka työssä kuvatulla prosessilla ovat hoidettavissa, työssä määritellyllä menettelyllä on mahdollisuudet saavuttaa epäedullisen hintakehityksen riskin väheneminen ja parempi taloudellinen tulos teollisen energianhallinnan sähkökaupankäynnissä.

Paperitehtaan lämpöenergianhallinta

Diplomityön tavoitteena oli kehittää oikeudenmukainen keino lämmönkulutuksen osastokohtaisen jaolle, sekä löytää lämmönkäytön tehostamismahdollisuuksia Stora Enson Summan tehtailta. Työ liittyi osana Summan tehtaille tehtyyn energiakatselmukseen. Todenmukainen lämmöntuotannon ja -kulutuksen tunteminen luo perustan oikeansuuntaisille lämpötaloutta parantaville teoille ja mahdollistaa lämpöenergian kustannusten oikean jaon osastoille. Osastokohtaisen lämmönkulutuksen selvittämiseksi tarvitaan uusia virtaus- ja lämpötilamittauksia. Tärkeintä on kuitenkin saada ensin tehtaan kokonaistase selville. Tehtaan lämmöntuotanto ja –kulutus eivät nykyisten mittausten mukaan täsmää täysin. Suurimpien höyryn massavirtojen mittaukset on saatava luotettaviksi kalibroinnein tai uusinnoin, ja vasta tehtaan kokonaislämpötaseen täsmätessä on järkevää pyrkiä täydellisiin osastokohtaisiin lämpötaseisiin. Lämmönkulutuksen pienentäminen vähentää polttoainekustannuksia, jolloin paperintuotannon kokonaiskustannukset pienenevät parantaen tehtaan kilpailukykyä. Vuonna 2005 alkava hiilidioksidipäästökauppa tulee luultavasti vaikuttamaan teollisuuden lämmönkäyttöön. Päästökaupan rasituksia voidaan vähentää pienentämällä lämmönkulutusta. Tehtaan lämmönsäästömahdollisuuksia tutkittiin systemaattisesti mm. lauhteenpalautusten järjestämisen tuomia säästöjä laskemalla, sekä osastokohtaisesti eri lämmönkulutuskohteita tarkastelemalla. Tehtaan lämmöntarvetta on mahdollista pienentää merkittävästi muutamilla toimenpiteillä.

State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Purchasing and supply management capabilities in Finnish medium-sized enterprises

Purchasing and supply management (PSM) has become increasingly important for companies to survive in current highly competitive market. Increased outsourcing has extended the role of PSM, making external resource management and supplier relationships critical success factors in business. However, the recent research has mainly concentrated on large enterprises. Therefore the PSM issues related to medium-sized enterprises represent a significant research area. The thesis aims to explore the status and role of PSM in Finnish medium-sized firms, understand how strategic companies consider PSM to be, clarify what are the competence requirements for PSM professionals, and increase the understanding of PSM capabilities needed from the points view of individual competence and organisational capabilities. The study uses data that was collected in 2007 from purchasing executives at the director/CEO level representing a sample of 94 Finnish firms. 54 % of the respondent enterprises had a supply strategy. The total supply cost was on average 60 % of firms' turnover. Centralisation of PSM and outsourcing of logistics will increase in Finnish medium-sized enterprises. The findings point out that Finnish medium-sized enterprises had strategical features of PSM. However, Finnish firms have not concentrated on making strategies that relate to PSM. The elements that explain the existence of a supply strategy could be found in this study. It can be concluded from this study that there is an advantageous base for the development of strategic PSM, because nearly all the enterprises were of the opinion that PSM capabilities have an effect on business success. When reviewing the organisational capabilities, the five most important development elements were supplier relationships, both operational and strategic processes, time management, and personnel's competence. Training in internationalisation, strategic management, and communication could help to improve competences of PSM personnel.

Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Critical Success and Failure Factors of Knowledge Management Implementation in a Large Multinational Company

More and more companies are interested in implementing knowledge management. However, the majority of knowledge management initiatives will fail to have any significant impact. In this study, theories regarding knowledge management implementation and adoption are investigated further. The objective of this study is to deepen understanding regarding the critical factors that contribute to successful knowledge management adoption in large multinational companies. The study is formulated around the following four research questions: 1. What are the key success and failure factors in knowledge management implementation? 2. How can knowledge management adoption be improved at the individual, group and organizational levels of the company? 3. What are the critical factors that hinder knowledge management adoption in the case company? 4. How can the case company promote the adoption of knowledge management among company personnel? The methodology used in this study is a combination of a literature review and an explanatory, exploratory, qualitative single-case study. The literature review answers the first and second research questions. Based on the literature review, a framework is presented to illustrate the factors contributing to the success of knowledge management implementation. The framework also links together knowledge management implementation and adoption. The third research question is answered by revealing the relevant findings from 21 expert interviews and 2 online questionnaires with 42 respondents in total. By comparing and contrasting the results of the literature review with the findings of the empirical case study, the fourth research question is answered. The concrete outcomes of this study are a framework to elucidate the factors contributing to the success of knowledge management implementation, a case study highlighting the issues that hinder knowledge management adoption within the case company, and recommendations for the case company.

Conservation Genetics of Exploited Finnish Salmonid Fishes

Genetic diversity is one of the levels of biodiversity that the World Conservation Union (IUCN) has recognized as being important to preserve. This is because genetic diversity is fundamental to the future evolution and to the adaptive flexibility of a species to respond to the inherently dynamic nature of the natural world. Therefore, the key to maintaining biodiversity and healthy ecosystems is to identify, monitor and maintain locally-adapted populations, along with their unique gene pools, upon which future adaptation depends. Thus, conservation genetics deals with the genetic factors that affect extinction risk and the genetic management regimes required to minimize the risk. The conservation of exploited species, such as salmonid fishes, is particularly challenging due to the conflicts between different interest groups. In this thesis, I conduct a series of conservation genetic studies on primarily Finnish populations of two salmonid fish species (European grayling, Thymallus thymallus, and lake-run brown trout, Salmo trutta) which are popular recreational game fishes in Finland. The general aim of these studies was to apply and develop population genetic approaches to assist conservation and sustainable harvest of these populations. The approaches applied included: i) the characterization of population genetic structure at national and local scales; ii) the identification of management units and the prioritization of populations for conservation based on evolutionary forces shaping indigenous gene pools; iii) the detection of population declines and the testing of the assumptions underlying these tests; and iv) the evaluation of the contribution of natural populations to a mixed stock fishery. Based on microsatellite analyses, clear genetic structuring of exploited Finnish grayling and brown trout populations was detected at both national and local scales. Finnish grayling were clustered into three genetically distinct groups, corresponding to northern, Baltic and south-eastern geographic areas of Finland. The genetic differentiation among and within population groups of grayling ranged from moderate to high levels. Such strong genetic structuring combined with low genetic diversity strongly indicates that genetic drift plays a major role in the evolution of grayling populations. Further analyses of European grayling covering the majority of the species’ distribution range indicated a strong global footprint of population decline. Using a coalescent approach the beginning of population reduction was dated back to 1 000-10 000 years ago (ca. 200-2 000 generations). Forward simulations demonstrated that the bottleneck footprints measured using the M ratio can persist within small populations much longer than previously anticipated in the face of low levels of gene flow. In contrast to the M ratio, two alternative methods for genetic bottleneck detection identified recent bottlenecks in six grayling populations that warrant future monitoring. Consistent with the predominant role of random genetic drift, the effective population size (N_e) estimates of all grayling populations were very low with the majority of N_e estimates below 50. Taken together, highly structured local populations, limited gene flow and the small N_e of grayling populations indicates that grayling populations are vulnerable to overexploitation and, hence, monitoring and careful management using the precautionary principles is required not only in Finland but throughout Europe. Population genetic analyses of lake-run brown trout populations in the Inari basin (northernmost Finland) revealed hierarchical population structure where individual populations were clustered into three population groups largely corresponding to different geographic regions of the basin. Similar to my earlier work with European grayling, the genetic differentiation among and within population groups of lake-run brown trout was relatively high. Such strong differentiation indicated that the power to determine the relative contribution of populations in mixed fisheries should be relatively high. Consistent with these expectations, high accuracy and precision in mixed stock analysis (MSA) simulations were observed. Application of MSA to indigenous fish caught in the Inari basin identified altogether twelve populations that contributed significantly to mixed stock fisheries with the Ivalojoki river system being the major contributor (70%) to the total catch. When the contribution of wild trout populations to the fisheries was evaluated regionally, geographically nearby populations were the main contributors to the local catches. MSA also revealed a clear separation between the lower and upper reaches of Ivalojoki river system – in contrast to lower reaches of the Ivalojoki river that contributed considerably to the catch, populations from the upper reaches of the Ivalojoki river system (>140 km from the river mouth) did not contribute significantly to the fishery. This could be related to the available habitat size but also associated with a resident type life history and increased cost of migration. The studies in my thesis highlight the importance of dense sampling and wide population coverage at the scale being studied and also demonstrate the importance of critical evaluation of the underlying assumptions of the population genetic models and methods used. These results have important implications for conservation and sustainable fisheries management of Finnish populations of European grayling and brown trout in the Inari basin.

Quality management of outsourcing welded structure: case China

For any international companies who wish to enter the Chinese market, quality is base on the fundamental. The companies are coming to realize the importance of quality gradually, thus companies have been put the quality problems on the agenda. The competitiveness of companies comes from quality. Quality is the key to success, and it can decide that the companies can be accepted or eliminated by the market. Due to the obvious benefits, the demand of the method of how to achieve high quality of product keeps growing. During achieving the high quality process, the main troubles come from the impact between Eastern and Western culture. Chinese culture which is different with Western one have lasted as long as five thousand years. Such a culture deeply rooted in the hearts of Chinese people, and effected generation after generation of Chinese people's working style and ways of thinking. This thesis determines how to find a good fit point between Eastern and Western culture. Doing right thing by the right way. The nature of improving quality is improving management level in fact. "How to manage, who should be managed", the thesis explains the basic and best option to achieve those. It describes three-dimension-style management to monitoring the working process. This kind of management style can inspect production process from horizontal and vertical direction. In this management way, it defines effective evaluation system to every subcontractor, and makes the companies to achieve the ultimate goal - satisfy quality. Because of the importance of human factor, the thesis determines the range of training of the inspector and welder due to the current situation of China. The results show that in order to reach reliable training effective evaluation, not only the quality of the human but also the ultimate goal of product quality.

Numerical modelling of small supersonic axial flow turbines

Supersonic axial turbine stages typically exhibit lower efficiencies than subsonic axial turbine stages. One reason for the lower efficiency is the occurrence of shock waves. With higher pressure ratios the flow inside the turbine becomes relatively easily supersonic if there is only one turbine stage. Supersonic axial turbines can be designed in smaller physical size compared to subsonic axial turbines of same power. This makes them good candidates for turbochargers in large diesel engines, where space can be a limiting factor. Also the production costs are lower for a supersonic axial turbine stage than for two subsonic stages. Since supersonic axial turbines are typically low reaction turbines, they also create lower axial forces to be compensated with bearings compared to high reaction turbines. The effect of changing the stator-rotor axial gap in a small high (rotational) speed supersonic axial flow turbine is studied in design and off-design conditions. Also the effect of using pulsatile mass flow at the supersonic stator inlet is studied. Five axial gaps (axial space between stator and rotor) are modeled using threedimensional computational fluid dynamics at the design and three axial gaps at the off-design conditions. Numerical reliability is studied in three independent studies. An additional measurement is made with the design turbine geometry at intermediate off-design conditions and is used to increase the reliability of the modelling. All numerical modelling is made with the Navier-Stokes solver Finflo employing Chien’s k ¡ ² turbulence model. The modelling of the turbine at the design and off-design conditions shows that the total-to-static efficiency of the turbine decreases when the axial gap is increased in both design and off-design conditions. The efficiency drops almost linearily at the off-design conditions, whereas the efficiency drop accelerates with increasing axial gap at the design conditions. The modelling of the turbine stator with pulsatile inlet flow reveals that the mass flow pulsation amplitude is decreased at the stator throat. The stator efficiency and pressure ratio have sinusoidal shapes as a function of time. A hysteresis-like behaviour is detected for stator efficiency and pressure ratio as a function of inlet mass flow, over one pulse period. This behaviour arises from the pulsatile inlet flow. It is important to have the smallest possible axial gap in the studied turbine type in order to maximize the efficiency. The results for the whole turbine can also be applied to some extent in similar turbines operating for example in space rocket engines. The use of a supersonic stator in a pulsatile inlet flow is shown to be possible.

IDEAS for Strategic Technology Management: Design of an electronically mediated scenario method

The age-old adage goes that nothing in this world lasts but change, and this generation has indeed seen changes that are unprecedented. Business managers do not have the luxury of going with the flow: they have to plan ahead, to think strategies that will meet the changing conditions, however stormy the weather seems to be. This demand raises the question of whether there is something a manager or planner can do to circumvent the eye of the storm in the future? Intuitively, one can either run on the risk of something happening without preparing, or one can try to prepare oneself. Preparing by planning for each eventuality and contingency would be impractical and prohibitively expensive, so one needs to develop foreknowledge, or foresight past the horizon of the present and the immediate future. The research mission in this study is to support strategic technology management by designing an effective and efficient scenario method to induce foresight to practicing managers. The design science framework guides this study in developing and evaluating the IDEAS method. The IDEAS method is an electronically mediated scenario method that is specifically designed to be an effective and accessible. The design is based on the state-of-the-art in scenario planning, and the product is a technology-based artifact to solve the foresight problem. This study demonstrates the utility, quality and efficacy of the artifact through a multi-method empirical evaluation study, first by experimental testing and secondly through two case studies. The construction of the artifact is rigorously documented as justification knowledge as well as the principles of form and function on the general level, and later through the description and evaluation of instantiations. This design contributes both to practice and foundation of the design. The IDEAS method contributes to the state-of-the-art in scenario planning by offering a light-weight and intuitive scenario method for resource constrained applications. Additionally, the study contributes to the foundations and methods of design by forging a clear design science framework which is followed rigorously. To summarize, the IDEAS method is offered for strategic technology management, with a confident belief that it will enable gaining foresight and aid the users to choose trajectories past the gales of creative destruction and off to a brighter future.