Development of a Radiometer Front End for Detection of Oil Spill on Sea Surface

Kaikki kappaleet säteilevät sähkömagneettista energiaa. Radiometreillä voidaan mitata tätä säteilyä, ja mittausten avulla voidaan kaukokartoituksessa analysoida monia ilmakehään ja maan pintaan liittyviä ilmiöitä. Säteilyä kerätään useimmiten radiometriin kytketyn antennin avulla. Mikroaaltoalueella säteilystä saatava teho on verrannollinen kohteen kirkkauslämpötilaan. Kirkkauslämpötila on puolestaan verrannollinen kohteen fyysiseen lämpötilaan materiaalin emissiivisyyden kautta. Emissiivisyys voi vaihdella suuresti eri pintojen ja materiaalien välillä. Näin ollen mittaamalla kohteen kirkkauslämpötilaa saadaan tietoa sen ominaisuuksista. Mikroaaltoradiometrin avulla voidaan havaita öljyläikkä meren pinnalta, sekä määrittää öljyläikän paksuus. Öljy muodostaa ohuen kalvon meren pinnalla. Ohuen kalvon ylä- ja alapinnasta heijastuneet aallot kulkevat eri matkan, jonka seurauksena muodostuu interferenssikuvio. Interferenssi on joko konstruktiivinen tai destruktiivinen riippuen heijastusten vaihe-erosta. Pistetaajuudella tästä seuraa kalvon paksuudesta riippuva sinimuotoinen emissiivisyys. Mallintamalla tämä ilmiö riittävän tarkasti voidaan radiometrin mittaamaa kirkkauslämpötilaa verrata mallinnettuun arvoon ja täten määrittää öljykerroksen paksuus. Tässä työssä esitetään kahden radiometrin suunnittelu ja testaus. Työ rajoittuu radiometrien alustavaan testausvaiheeseen. Radiometrit on suunniteltu 36,5GHz sekä 89GHz taajuuksille. Työn suurin kontribuutio on radiometrien etupään suunnittelussa ja testauksessa, kalibraatiomenetelmien kehittämisessä sekä kylmäkuorman suunnittelussa. Lisäksi työssä esitetään radiometrien systeemisuunnittelu sekä siihen liittyvät simulaatiot.

Driver of Demand in Cargo and Passenger Traffic Between Penta Ports

Maritime transport moves around 6 billion tonnes of freight every year. The freight consists of liquid bulks (45%), dry bulks (23%) and general cargo (32%). Freight traffic and transports chains vary according to region, commodity and the origin and the destination of freight. In the European Union the ports sector handles over 90% of the trade with third countries. The share of intra-EU trade is approximately 30% of the total transportation and the number of passengers is over 200 million every year. The Baltic Sea has more than 50,000 vessels a year pass the Skaw at the northernmost tip of Denmark on their way into or out of the Baltic. Roughly 60% to 70% of these vessels are cargo vessels and 17% to 25% tankers. Ports and maritime transport play a crucial role in global commerce today. Today’s business environment is changing rapidly, and the constant changes create challenges for the transport industry and maritime traffic. Ports have to adapt to continuous changes in economic structures, logistics demands, and people’s travel and leisure patterns. In order to ensure the competitiveness of sea connections, the ports need to fully enhance multilateral cross-border understanding and cooperation. In this report the focus is on liner traffic between five ports in the Central Baltic Region: Stockholm, Tallinn, Helsinki Turku and Naantali. The report defines the drivers of the demand for cargo and passenger traffic and highlights the most important factors. The economic situation and foreign trade of each county are elaborated on with detailed information about the flows of traffic between the five ports. Based on expert interviews, the main characteristics of each port, including strengths and weaknesses, are presented. The report is based on primary and secondary data. Primary data was received through interviews and mail surveys. Secondary data was attained through a literature research, statistics, data given by the PENTA ports and webpages. The report is divided into two main parts: the drivers creating the demand for transport and the results of current cargo and passenger flows between PENTA ports.

Liquid transportation and distribution during (re)wetting : impact on coated papers in printing

In many industrial applications, such as the printing and coatings industry, wetting of porous materials by liquids includes not only imbibition and permeation into the bulk but also surface spreading and evaporation. By understanding these phenomena, valuable information can be obtained for improved process control, runnability and printability, in which liquid penetration and subsequent drying play important quality and economic roles. Knowledge of the position of the wetting front and the distribution/degree of pore filling within the structure is crucial in describing the transport phenomena involved. Although exemplifying paper as a porous medium in this work, the generalisation to dynamic liquid transfer onto a surface, including permeation and imbibition into porous media, is of importance to many industrial and naturally occurring environmental processes. This thesis explains the phenomena in the field of heatset web offset printing but the content and the analyses are applicable in many other printing methods and also other technologies where water/moisture monitoring is crucial in order to have a stable process and achieve high quality end products. The use of near-infrared technology to study the water and moisture response of porous pigmented structures is presented. The use of sensitive surface chemical and structural analysis, as well as the internal structure investigation of a porous structure, to inspect liquid wetting and distribution, complements the information obtained by spectroscopic techniques. Strong emphasis has been put on the scale of measurement, to filter irrelevant information and to understand the relationship between interactions involved. The near-infrared spectroscopic technique, presented here, samples directly the changes in signal absorbance and its variation in the process at multiple locations in a print production line. The in-line non-contact measurements are facilitated by using several diffuse reflectance probes, giving the absolute water/moisture content from a defined position in the dynamic process in real-time. The nearinfrared measurement data illustrate the changes in moisture content as the paper is passing through the printing nips and dryer, respectively, and the analysis of the mechanisms involved highlight the roles of the contacting surfaces and the relative liquid carrier properties of both non-image and printed image areas. The thesis includes laboratory studies on wetting of porous media in the form of coated paper and compressed pigment tablets by mono-, dual-, and multi-component liquids, and paper water/moisture content analysis in both offline and online conditions, thus also enabling direct sampling of temporal water/moisture profiles from multiple locations. One main focus in this thesis was to establish a measurement system which is able to monitor rapid changes in moisture content of paper. The study suggests that near-infrared diffuse reflectance spectroscopy can be used as a moisture sensitive system and to provide accurate online qualitative indicators, but, also, when accurately calibrated, can provide quantification of water/moisture levels, its distribution and dynamic liquid transfer. Due to the high sensitivity, samples can be measured with excellent reproducibility and good signal to noise ratio. Another focus of this thesis was on the evolution of the moisture content, i.e. changes in moisture content referred to (re)wetting, and liquid distribution during printing of coated paper. The study confirmed different wetting phases together with the factors affecting each phase both for a single droplet and a liquid film applied on a porous substrate. For a single droplet, initial capillary driven imbibition is followed by equilibrium pore filling and liquid retreat by evaporation. In the case of a liquid film applied on paper, the controlling factors defining the transportation were concluded to be the applied liquid volume in relation to surface roughness, capillarity and permeability of the coating giving the liquid uptake capacity. The printing trials confirmed moisture gradients in the printed sheet depending on process parameters such as speed, fountain solution dosage and drying conditions as well as the printed layout itself. Uneven moisture distribution in the printed sheet was identified to be one of the sources for waving appearance and the magnitude of waving was influenced by the drying conditions.

Biodiversity and ecosystem functioning in angiosperm communities in the Baltic Sea

The biological variation in nature is called biodiversity. Anthropogenic pressures have led to a loss of biodiversity, alarming scientists as to what consequences declining diversity has for ecosystem functioning. The general consensus is that diversity (e.g. species richness or identity) affects functioning and provides services from which humans benefit. The aim of this thesis was to investigate how aquatic plant species richness and identity affect ecosystem functioning in terms of processes such as primary production, nutrient availability, epifaunal colonization and properties e.g. stability of Zostera marina subjected to shading. The main work was carried out in the field and ranged temporally from weeklong to 3.5 months-long experiments. The experimental plants used frequently co-occur in submerged meadows in the northern Baltic Sea and consist of eelgrass (Z. marina), perfoliate pondweed (Potamogeton perfoliatus), sago pondweed (P. pectinatus), slender-leaved pondweed (P. filiformis) and horned pondweed (Zannichellia palustris). The results showed that plant richness affected epifaunal community variables weakly, but had a strong positive effect on infaunal species number and functional diversity, while plant identity had strong effects on amphipods (Gammarus spp.), of which abundances were higher in plant assemblages consisting of P. perfoliatus. Depending on the starting standardizing unit, plant richness showed varying effects on primary production. In shoot density-standardized plots, plant richness increased the shoot densities of three out of four species and enhanced the plant biomass production. Both positive complementarity and selection effects were found to underpin the positive biodiversity effects. In shoot biomass-standardized plots, richness effects only affected biomass production of one species. Negative selection was prevalent, counteracting positive complementarity, which resulted in no significant biodiversity effect. The stability of Z. marina was affected by plant richness in such that Z. marina growing in polycultures lost proportionally less biomass than Z. marina in monocultures and thus had a higher resistance to shading. Monoculture plants in turn gained biomass faster, and thereby had a faster recovery than Z. marina growing in polycultures. These results indicate that positive interspecific interactions occurred during shading, while the faster recovery of monocultures suggests that the change from shading stress to recovery resulted in a shift from positive interactions to resource competition between species. The results derived from this thesis show that plant diversity affects ecosystem functioning and contribute to the growing knowledge of plant diversity being an important component of aquatic ecosystems. Diverse plant communities sustain higher primary productivity than comparable monocultures, affect faunal communities positively and enhance stability. Richness and identity effects vary, and identity has generally stronger effects on more variables than richness. However, species-rich communities are likely to contain several species with differing effects on functions, which renders species richness important for functioning. Mixed meadows add to coastal ecosystem functioning in the northern Baltic Sea and may provide with services essential for human well-being.

Logistics of North-West Russia and Rail Baltica: Standpoints of Private Sector

The main aims of the present report are to describe the current state of railway transport in Russia, and to gather standpoints of Russian private transportation logistics sector towards the development of new railway connection called Rail Baltica Growth Corridor, connecting North-West Russia with Germany through the Baltic States and Poland. North-West Russia plays important role not only in Russian logistics, but also wider European markets as in container sea ports handling is approx. 2.5 mill. TEU p.a. and handling volume in all terminals is above 190 million tons p.a. The whole transportation logistics sector is shortly described as an operational environment for railways – this is done through technical and economic angles. Transportation development is always going in line with economics of the country, so the analysis on economical development is also presented. Logistics integration of the country is strongly influenced by its engagement in the international trade. Although, raw material handling at sea ports and container transports (imports) are blossoming, domestic transportation market is barely growing (in long-term perspective). Thus, recent entrance of Russia into World Trade Organization (WTO) is analyzed theme in this research, as the WTO is an important regulator of the foreign trade and enabler of volume growth in foreign trade related transportation logistics. However, WTO membership can influence negatively the development of Russia’s own industry and its volumes (these have been uncompetitive in global markets for decades). Data gathering in empirical part was accomplished by semi-structured case study interviews among North-West Russian logistics sector actors (private). These were conducted during years 2012-2013, and research compiles findings out of ten case company interviews. Although, there was no sea port involved in the study, most of the interviewed companies relied in European Logistics within significant parts in short sea shipping and truck combined transportation chains (in Russian part also using railways). As the results of the study, it could be concluded that Rail Baltica is seen as possible transport corridor in most of the interviewed companies, if there is enough cargo available. However, interviewees are a bit sceptical, because major and large-scale infrastructural improvements are needed. Delivery time, frequency and price level are three main factors influencing the attractiveness of Rail Baltica route. Price level is the most important feature, but if RB can offer other advantages such as higher frequency, shorter lead times or more developed set of value-added services, then some flexibility is possible for the price level. Environmental issues are not the main criteria of today, but are recognized and discussed among customers. Great uncertainty exists among respondents e.g. on forthcoming sulphur oxide ban on Baltic Sea shipping (whether or not it is going to be implemented in Russia). Rather surprisingly, transportation routes to Eastern Europe and Mediterranean area are having higher value and price space than those to Germany/Central Europe. Border crossing operations (traction monopoly at rails and customs), gauge widths as well as unclear decision-making processes (in Russia), are named as hindering factors. Performance standards for European connected logistics among Russian logistics sector representatives are less demanding as compared to neighbourhood countries belonging to EU.

Deregulation’s Impact on the Railway Freight Transport Sector’s Future in the Baltic Sea Region

The European transport market has confronted several changes during the last decade. Due to European Union legislative mandates, the railway freight market was deregulated in 2007. The market followed the trend started by other transport modes as well as other previously regulated industries such as banking, telecommunications and energy. Globally, the first country to deregulate the railway freight market was the United States, with the introduction of the Staggers Rail Act in 1980. Some European countries decided to follow suit already before regulation was mandated; among the forerunners were the United Kingdom, Sweden and Germany. The previous research has concentrated only on these countries, which has provided an interesting research gap for this thesis. The Baltic Sea Region consists of countries with different kinds of liberalization paths, including Sweden and Germany, which have been on the frontline, whereas Lithuania and Finland have only one active railway undertaking, the incumbent. The transport market of the European Union is facing further challenges in the near future, due to the Sulphur Directive, oil dependency and the changing structure of European rail networks. In order to improve the accessibility of this peripheral area, further action is required. This research focuses on topics such as the progression of deregulation, barriers to entry, country-specific features, cooperation and internationalization. Based on the research results, it can be stated that the Baltic Sea Region’s railway freight market is expected to change in the future. Further private railway undertakings are anticipated, and these would change the market structure. The realization of European Union’s plans to increase the improved rail network to cover the Baltic States is strongly hoped for, and railway freight market counterparts inside and among countries are starting to enhance their level of cooperation. The Baltic Sea Region countries have several special national characteristics which influence the market and should be taken into account when companies evaluate possible market entry actions. According to thesis interviews, the Swedish market has a strong level of cooperation in the form of an old-boy network, and is supported by a positive attitude of the incumbent towards the private railway undertakings. This has facilitated the entry process of newcomers, and currently the market has numerous operating railway undertakings. A contrary example was found from Poland, where the incumbent sent old rolling stock to the scrap yard rather than sell it to private railway undertakings. The importance of personal relations is highlighted in Russia, followed by the railway market’s strong political bond with politics. Nonetheless, some barriers to entry are shared by the Baltic Sea Region, the main ones being acquisition of rolling stock, bureaucracy and needed investments. The railway freight market is internationalizing, which is perceived via several alliances as well as the increased number of mergers and acquisitions. After deregulation, markets seem to increase the number of railway undertakings at a rather fast pace, but with the passage of time, the larger operators tend to acquire smaller ones. Therefore, it is expected that in a decade’s time, the number of railway undertakings will start to decrease in the deregulation pioneer countries, while the ones coming from behind might still experience an increase. The Russian market is expected to be totally liberalized, and further alliances between the Russian Railways and European railway undertakings are expected to occur. The Baltic Sea Region’s railway freight market is anticipated to improve, and, based on the interviewees’ comments, attract more cargoes from road to rail.

Overview on the Cost-effectiveness of Maritime Safety Policy Instruments

Maritime safety is an issue that has gained a lot of attention in the Baltic Sea area due to the dense maritime traffic and transportation of oil in the area. Lots of effort has been paid to enhance maritime safety in the area. The risk exists that excessive legislation and other requirements mean more costs for limited benefit. In order to utilize both public and private resources efficiently, awareness is required of what kind of costs maritime safety policy instruments cause and whether the costs are in relation to benefits. The aim of this report is to present an overview of the cost-effectiveness of maritime safety policy instruments focusing on the cost aspect: what kind of costs maritime safety policy causes, to whom, what affects the cost-effectiveness and how cost-effectiveness is studied. The study is based on a literature review and on the interviews of Finnish maritime experts. The results of this study imply that cost-effectiveness is a complicated issue to evaluate. There are no uniform practices for which costs and benefits should be included in the evaluation and how they should be valued. One of the challenges is how to measure costs and benefits during the course of a longer time period. Often a lack of data erodes the reliability of evaluation. In the prevention of maritime accidents, costs typically include investments in ship structures or equipment, as well as maintenance and labor costs. Also large investments may be justifiable if they respectively provide significant improvements to maritime safety. Measures are cost-effective only if they are implemented properly. Costeffectiveness is decreased if a measure causes overlapping or repetitious work. Costeffectiveness is also decreased if the technology isn’t user-friendly or if it is soon replaced with a new technology or another new appliance. In future studies on the cost-effectiveness of maritime safety policy, it is important to acknowledge the dependency between different policy instruments and the uncertainty of the factors affecting cost-effectiveness. The costs of a single measure are rarely relatively significant and the effect of each measure on safety tends to be positive. The challenge is to rank the measures and to find the most effective combination of different policy instruments. The greatest potential offered for the analysis of cost-effectiveness of individual measures is their implementation in clearly defined risk situations, in which different measures are truly alternative to each other. Overall, maritime safety measures do not seem to be considered burdening for the shipping industry in Finland at the moment. Generally actors in the Finnish shipping industry seem to find maintaining a high safety level important and act accordingly.

Corporate Social Responsibility and Shipping Views of Baltic Sea Shipping Companies on the Benefits of Responsibility

The safety of shipping operations in the Baltic Sea is an extensively studied issue due to the density of traffic and the ecological sensitivity of the area. The focus has, however, mainly been on ship technology or on traffic control measures and the operative safety aspect of shipping is in a minor position in maritime safety studies and is lacking in terms of solutions. Self-regulatory and voluntary measures could be effective ways to improve the operational safety of shipping. Corporate social responsibility, or CSR, is one example of a voluntary measure that the shipping companies can take. CSR can enhance maritime safety and improve the shipping companies’ competitiveness. The aim of this study is to increase the knowledge of CSR in the maritime sector and study its applicability and benefits to the shipping companies. The research comprises of a theory part and a questionnaire study, which examine the significance of corporate social responsibility in shipping companies’ maritime safety and competitiveness. The aim of the questionnaire study is to find out how corporate social responsibility is implemented in the shipping companies. According to the literature review, responsible actions can produce financial and time costs, but due to these actions cost savings in the form of learning and increased efficiency can be achieved. Responsible actions can also produce concrete improvements and a reputation of responsibility that can lead to both cost savings and increase in the company’s income. CSR is recognised as having real business benefits in terms of attracting customers and high-quality employees. In shipping, CSR usually focuses on environmental issues. Environmental social responsibility in shipping is mainly motivated by the need to comply with existing and forthcoming regulation. Shipping companies engage in CSR to gain competitive advantage and to increase maritime safety. The social aspects of CSR take into account the well-being and skills of the employees, corporation and other stakeholders of the company. The questionnaire study revealed that the most common CSR measures in shipping companies are environmental measures, and that environmental concerns are considered to be the most important reason to engage in CSR. From the preliminary question about the concept of CSR it can also be seen that safety issues are commonly considered to be a part of CSR and safety gains are the second most important reason to engage in CSR. From the questionnaire, it can also be extrapolated that gaining a better reputation is one of the most important reasons to engage in CSR in the first place. For example, the main economic benefit was seen to be the increase of customer numbers as a result of a better reputation. Based on the study, it would seem that companies are starting to realise that they might gain competitive advantage and be favoured as shippers if they engage in sustainable, responsible operations and present themselves as “green”.

Scenario-based traffic forecasts for the routes between the PENTA ports in 2020

Maritime transport is the foundation for trade in the Baltic Sea area. It represents over 15% of the world’s cargo traffic and it is predicted to increase by over 100% in the future. There are currently over 2,000 ships sailing on the Baltic Sea and both the number and the size of ships have been growing in recent years. Due to the importance of maritime traffic in the Baltic Sea Region, ports have to be ready to face future challenges and adapt to the changing operational environment. The companies within the transportation industry – in this context ports, shipowners and logistics companies – compete continuously and although the number of companies in the business is not particularly substantial because the products offered are very similar, other motives for managing the supply chain arise. The factors creating competitive advantage are often financial and related to cost efficiency, but geographical location, road infrastructure in the hinterland and vessel connections are among the most important factors. The PENTA project focuses on adding openness, transparency and sharing knowledge and information, so that the challenges of the future can be better addressed with regard to cooperation. This report presents three scenario-based traffic forecasts for routes between the PENTA ports in 2020. The chosen methodology is PESTE, in which the focus in on economic factors affecting future traffic flows. The report further analyses the findings and results of the first PENTA WP2 report “Drivers of demand in cargo and passenger traffic between PENTA ports” and utilises the same material, which was obtained through interviews and mail surveys.

Five Baltic Ports Togehter: Forecasts, Trends and Recommendations

The ports of Stockholm, Tallinn, Helsinki, Naantali and Turku play key roles in making the Central Baltic region accessible. Effective, competitive, eco-friendly and safe port procedures and solutions for the transportation of goods are of major importance for trade in the Baltic Sea region. This report presents the most essential results and recommendations of the PENTA project, which focused on how ports could better comprehend and face current and future challenges facing carriage of goods by sea. Each of the four work packages (WPs) of the PENTA project analysed the changes from a different perspective. WP2 focused on traffic flows between the PENTA ports. Its main emphasis was on the ports, shipowners, and logistics companies that are the key parties in freight transport and on the changes affecting the economy of those ports. In WP3 noise as an environmental challenge for ports was investigated and the analysis also shed light on the relationship between the port and the city. In WP4 procedures related to safety, security and administrative procedures were researched. The main emphasis was on identifying the requirements for the harmonisation of those procedures. Collaboration is highlighted throughout this report. In order to prepare for the future, it was found that ports need to respond to growing competition, increasing costs and shifts in customer demand by strengthening their existing partnerships with other actors in the maritime cluster. Cargo and passenger transport are the main sources of income for most ports. Cargo traffic between the PENTA ports is expected to grow steadily in the future and the outlook for passenger traffic is positive. However, to prepare for the future, ports should not only secure the core activities which generate revenue but also seek alternative ways to make profit. In order to gain more transit traffic, it is suggested that ports conduct a more thorough study of the future requirements for doing business with Russia. The investigation of noise at ports revealed two specific dilemmas that ports cannot solve alone. Firstly, the noise made by vessels and, secondly, the relationship between the port and the surrounding city. Vessels are the most important single noise source in the PENTA ports and also one of the hardest noise sources to handle. Nevertheless, port authorities in Finland and Sweden are held responsible for all noise in the port area, including noise produced by vessels, which is noise the port authority can only influence indirectly. Building housing by waterfront areas close to ports may also initiate disagreements because inhabitants may want quiet areas, whereas port activities always produce some noise from their traffic. The qualitative aspects of the noise question, cooperating with the stakeholders and the communicating of issues related to noise are just as important. We propose that ports should follow the logic of continuous improvement in their noise management. The administrative barriers discussed in this report are mainly caused by differences in international and national legislation, variations in the customs procedures of each country, the incompatibility of the IT systems used in maritime transport, noncompliance with regulations regarding dangerous goods, and difficulties in applying Schengen regulations to vessels from non-EU countries. Improving the situation is out of the hands of the ports to do alone and requires joint action on a variety of levels, including the EU, national authorities and across administrative borders.

Validation and Selection of Transportation Cost Drivers with Advanced Methods

In today's logistics environment, there is a tremendous need for accurate cost information and cost allocation. Companies searching for the proper solution often come across with activity-based costing (ABC) or one of its variations which utilizes cost drivers to allocate the costs of activities to cost objects. In order to allocate the costs accurately and reliably, the selection of appropriate cost drivers is essential in order to get the benefits of the costing system. The purpose of this study is to validate the transportation cost drivers of a Finnish wholesaler company and ultimately select the best possible driver alternatives for the company. The use of cost driver combinations as an alternative is also studied. The study is conducted as a part of case company's applied ABC-project using the statistical research as the main research method supported by a theoretical, literature based method. The main research tools featured in the study include simple and multiple regression analyses, which together with the literature and observations based practicality analysis forms the basis for the advanced methods. The results suggest that the most appropriate cost driver alternatives are the delivery drops and internal delivery weight. The possibility of using cost driver combinations is not suggested as their use doesn't provide substantially better results while increasing the measurement costs, complexity and load of use at the same time. The use of internal freight cost drivers is also questionable as the results indicate weakening trend in the cost allocation capabilities towards the end of the period. Therefore more research towards internal freight cost drivers should be conducted before taking them in use.

State of logistics and transport in the Baltic Sea region in 2025

The world’s pace of change is accelerating and new innovations, inventions and technologies come about every day. Change is unavoidable. It is difficult to keep up and even more difficult to prepare for the future. Even though it is not possible to know exactly what will happen in the future, by studying futures people can better anticipate what might lie ahead. By making decisions and realizing the consequences of their choices today, people and governments are able to actively decide how they will act in the future. Both opportunities and pitfalls lie ahead, which encourages actors to make more farsighted decisions. The Baltic Sea region is an interesting area for futures studies. It comprises 11 nations and more than 100 million inhabitants and entails countries with advanced, high-income economies, like Finland, Germany and Denmark, and developing economies, like Russia, Latvia and Lithuania. The western, eastern, northern and southern parts of the region are separated by the Baltic Sea, which at the same time represents a barrier and a facility for trade and travel between the countries belonging to the region The purpose of this study was to uncover the most probable future of transport and logistics in the Baltic Sea region in 2025 by using the Delphi method. Altogether 109 responses were collected in two separate instances from experts in all the Baltic Sea region countries, 56 of whom were defined as academic respondents and 53 of whom business respondents. Only minor differences in the opinions of academic and business experts were discovered, and the larger differences lie between eastern and western response groups. The Baltic Sea region is a very heterogeneous region and the division is clearest between East and West, which differ in political, economic, social, technological and environmental aspects. The probable future of the Baltic Sea region presented in this study is coherent with previous studies on the same subject. The future of the Baltic Sea region in terms of logistics and transport looks quite bright according to the experts who participated in the study. Trade volumes will grow and the importance of logistics and transport to the competitiveness of the region will increase. Respondents from eastern countries seemed to be more optimistic about the future in general. Most differences between opinions could be explained by the gap in technological and infrastructural development between the East and West. As eastern countries are less-developed in some parts of their economies, it is easier for them to improve the technical condition of infrastructure by merely catching up with the western countries.