Social ventures : the development of the theory of sustainable contributive advantage and initial empirical tests

This thesis attempts to fill gaps in both a theoretical basis and an operational and strategic understanding in the areas of social ventures, social entrepreneurship and nonprofit business models. This study also attempts to bridge the gap in strategic and economic theory between social and commercial ventures. More specifically, this thesis explores sustainable competitive advantage from a resource-based theory perspective and explores how it may be applied to the nonmarket situation of nonprofit organizations and social ventures. It is proposed that a social value-orientation of sustainable competitive advantage, called sustainable contributive advantage, provides a more realistic depiction of what is necessary in order for a social venture to perform better than its competitors over time. In addition to providing this realistic depiction, this research provides a substantial theoretical contribution in the area of economics, social ventures, and strategy research, specifically in regards to resource-based theory. The proposed model for sustainable contributive advantage uses resource-based theory and competitive advantage in order to be applicable to social ventures. This model proposes an explanation of a social venture’s ability to demonstrate consistently superior performance. In order to determine whether sustainable competitive advantage is in fact, appropriate to apply to both social and economic environments, quantitative analyses are conducted on a large sample of nonprofit organizations in a single industry and then compared to similar quantitative analyses conducted on commercial ventures. In comparing the trends and strategies between the two types of entities from a quantitative perspective, propositions are developed regarding a social venture’s resource utilization strategies and their possible impact on performance. Evidence is found to support the necessity of adjusting existing models in resource-based theory in order to apply them to social ventures. Additionally supported is the proposed theory of sustainable contributive advantage. The thesis concludes with recommendations for practitioners, researchers and policy makers as well as suggestions for future research paths.

Scheduling of guarded command based models

Formal methods provide a means of reasoning about computer programs in order to prove correctness criteria. One subtype of formal methods is based on the weakest precondition predicate transformer semantics and uses guarded commands as the basic modelling construct. Examples of such formalisms are Action Systems and Event-B. Guarded commands can intuitively be understood as actions that may be triggered when an associated guard condition holds. Guarded commands whose guards hold are nondeterministically chosen for execution, but no further control flow is present by default. Such a modelling approach is convenient for proving correctness, and the Refinement Calculus allows for a stepwise development method. It also has a parallel interpretation facilitating development of concurrent software, and it is suitable for describing event-driven scenarios. However, for many application areas, the execution paradigm traditionally used comprises more explicit control flow, which constitutes an obstacle for using the above mentioned formal methods. In this thesis, we study how guarded command based modelling approaches can be conveniently and efficiently scheduled in different scenarios. We first focus on the modelling of trust for transactions in a social networking setting. Due to the event-based nature of the scenario, the use of guarded commands turns out to be relatively straightforward. We continue by studying modelling of concurrent software, with particular focus on compute-intensive scenarios. We go from theoretical considerations to the feasibility of implementation by evaluating the performance and scalability of executing a case study model in parallel using automatic scheduling performed by a dedicated scheduler. Finally, we propose a more explicit and non-centralised approach in which the flow of each task is controlled by a schedule of its own. The schedules are expressed in a dedicated scheduling language, and patterns assist the developer in proving correctness of the scheduled model with respect to the original one.

Chromatographic recovery of chemicals from acidic biomass hydrolysates

Lignocellulosic biomasses (e.g., wood and straws) are a potential renewable source for the production of a wide variety of chemicals that could be used to replace those currently produced by petrochemical industry. This would lead to lower greenhouse gas emissions and waste amounts, and to economical savings. There are many possible pathways available for the manufacturing of chemicals from lignocellulosic biomasses. One option is to hydrolyze the cellulose and hemicelluloses of these biomasses into monosaccharides using concentrated sulfuric acid as catalyst. This process is an efficient method for producing monosaccharides which are valuable platforn chemicals. Also other valuable products are formed in the hydrolysis. Unfortunately, the concentrated acid hydrolysis has been deemed unfeasible mainly due to high chemical consumption resulting from the need to remove sulfuric acid from the obtained hydrolysates prior to the downstream processing of the monosaccharides. Traditionally, this has been done by neutralization with lime. This, however, results in high chemical consumption. In addition, the by-products formed in the hydrolysis are not removed and may, thus, hinder the monosaccharide processing. In order to improve the feasibility of the concentrated acid hydrolysis, the chemical consumption should be decreased by recycling of sulfuric acid without neutralization. Furthermore, the monosaccharides and the other products formed in the hydrolysis should be recovered selectively for efficient downstream processing. The selective recovery of the hydrolysis by-products would have additional economical benefits on the process due to their high value. In this work, the use of chromatographic fractionation for the recycling of sulfuric acid and the selective recovery of the main components from the hydrolysates formed in the concentrated acid hydrolysis was investigated. Chromatographic fractionation based on the electrolyte exclusion with gel type strong acid cation exchange resins in acid (H+) form as a stationary phase was studied. A systematic experimental and model-based study regarding the separation task at hand was conducted. The phenomena affecting the separation were determined and their effects elucidated. Mathematical models that take accurately into account these phenomena were derived and used in the simulation of the fractionation process. The main components of the concentrated acid hydrolysates (sulfuric acid, monosaccharides, and acetic acid) were included into this model. Performance of the fractionation process was investigated experimentally and by simulations. Use of different process options was also studied. Sulfuric acid was found to have a significant co-operative effect on the sorption of the other components. This brings about interesting and beneficial effects in the column operations. It is especially beneficial for the separation of sulfuric acid and the monosaccharides. Two different approaches for the modelling of the sorption equilibria were investigated in this work: a simple empirical approach and a thermodynamically consistent approach (the Adsorbed Solution theory). Accurate modelling of the phenomena observed in this work was found to be possible using the simple empirical models. The use of the Adsorbed Solution theory is complicated by the nature of the theory and the complexity of the studied system. In addition to the sorption models, a dynamic column model that takes into account the volume changes of the gel type resins as changing resin bed porosity was also derived. Using the chromatography, all the main components of the hydrolysates can be recovered selectively, and the sulfuric acid consumption of the hydrolysis process can be lowered considerably. Investigation of the performance of the chromatographic fractionation showed that the highest separation efficiency in this separation task is obtained with a gel type resin with a high crosslinking degree (8 wt. %); especially when the hydrolysates contain high amounts of acetic acid. In addition, the concentrated acid hydrolysis should be done with as low sulfuric acid concentration as possible to obtain good separation performance. The column loading and flow rate also have large effects on the performance. In this work, it was demonstrated that when recycling of the fractions obtained in the chromatographic fractionation are recycled to preceding unit operations these unit operations should included in the performance evaluation of the fractionation. When this was done, the separation performance and the feasibility of the concentrated acid hydrolysis process were found to improve considerably. Use of multi-column chromatographic fractionation processes, the Japan Organo process and the Multi-Column Recycling Chromatography process, was also investigated. In the studied case, neither of these processes could compete with the single-column batch process in the productivity. However, due to internal recycling steps, the Multi-Column Recycling Chromatography was found to be superior to the batch process when the product yield and the eluent consumption were taken into account.

Roles of leadership in complex environments : Enhancing Knowledge Flows in Organisational Constellations through Practice-Based Innovation Processes

Global challenges, complexity and continuous uncertainty demand development of leadership approaches, employees and multi-organisation constellations. Current leadership theories do not sufficiently address the needs of complex business environments. First of all, before successful leadership models can be applied in practice, leadership needs to shift from the industrial age to the knowledge era. Many leadership models still view leadership solely through the perspective of linear process thinking. In addition, there is not enough knowledge or experience in applying these newer models in practice. Leadership theories continue to be based on the assumption that leaders possess or have access to all the relevant knowledge and capabilities to decide future directions without external advice. In many companies, however, the workforce consists of skilled professionals whose work and related interfaces are so challenging that the leaders cannot grasp all the linked viewpoints and cross-impacts alone. One of the main objectives of this study is to understand how to support participants in organisations and their stakeholders to, through practice-based innovation processes, confront various environments. Another aim is to find effective ways of recognising and reacting to diverse contexts, so companies and other stakeholders are better able to link to knowledge flows and shared value creation processes in advancing joint value to their customers. The main research question of this dissertation is, then, to seek understanding of how to enhance leadership in complex environments. The dissertation can, on the whole, be characterised as a qualitative multiple-case study. The research questions and objectives were investigated through six studies published in international scientific journals. The main methods applied were interviews, action research and a survey. The empirical focus was on Finnish companies, and the research questions were examined in various organisations at the top levels (leaders and managers) and bottom levels (employees) in the context of collaboration between organisations and cooperation between case companies and their client organisations. However, the emphasis of the analysis is the internal and external aspects of organisations, which are conducted in practice-based innovation processes. The results of this study suggest that the Cynefin framework, complexity leadership theory and transformational leadership represent theoretical models applicable to developing leadership through practice-based innovation. In and of themselves, they all support confronting contemporary challenges, but an implementable method for organisations may be constructed by assimilating them into practice-based innovation processes. Recognition of diverse environments, their various contexts and roles in the activities and collaboration of organisations and their interest groups is ever-more important to achieving better interaction in which a strategic or formal status may be bypassed. In innovation processes, it is not necessarily the leader who is in possession of the essential knowledge; thus, it is the role of leadership to offer methods and arenas where different actors may generate advances. Enabling and supporting continuous interaction and integrated knowledge flows is of crucial importance, to achieve emergence of innovations in the activities of organisations and various forms of collaboration. The main contribution of this dissertation relates to applying these new conceptual models in practice. Empirical evidence on the relevance of different leadership roles in practice-based innovation processes in Finnish companies is another valuable contribution. Finally, the dissertation sheds light on the significance of combining complexity science with leadership and innovation theories in research.

Modeling of Liquid-Solid Flow in Industrial Scale

In the present work, liquid-solid flow in industrial scale is modeled using the commercial software of Computational Fluid Dynamics (CFD) ANSYS Fluent 14.5. In literature, there are few studies on liquid-solid flow in industrial scale, but any information about the particular case with modified geometry cannot be found. The aim of this thesis is to describe the strengths and weaknesses of the multiphase models, when a large-scale application is studied within liquid-solid flow, including the boundary-layer characteristics. The results indicate that the selection of the most appropriate multiphase model depends on the flow regime. Thus, careful estimations of the flow regime are recommended to be done before modeling. The computational tool is developed for this purpose during this thesis. The homogeneous multiphase model is valid only for homogeneous suspension, the discrete phase model (DPM) is recommended for homogeneous and heterogeneous suspension where pipe Froude number is greater than 1.0, while the mixture and Eulerian models are able to predict also flow regimes, where pipe Froude number is smaller than 1.0 and particles tend to settle. With increasing material density ratio and decreasing pipe Froude number, the Eulerian model gives the most accurate results, because it does not include simplifications in Navier-Stokes equations like the other models. In addition, the results indicate that the potential location of erosion in the pipe depends on material density ratio. Possible sedimentation of particles can cause erosion and increase pressure drop as well. In the pipe bend, especially secondary flows, perpendicular to the main flow, affect the location of erosion.

Culture in business interaction: an individual perspective : empirical studies in Finnish-Russian business relationships

The main objective of this doctoral dissertation is to reach a holistic and indepth understanding of the intercultural interaction within dyadic business relationships through the perspective of individual managers. The empirical setting is dyadic business relationships between Russian and Finnish firms in construction and engineering industries. The motivation for the study mainly arose from: 1) the lack of business marketing literature considering cultural and individual perspectives; 2) the need to find ways to study intercultural issues in business relationships, other than through the application of models derived from the work of Hofstede (1980). The study consists of two parts, an introductory essay containing the research objectives, theoretical foundations, methodological choices, limitations and contributions, and original research articles. The four articles each address a sub-objective: 1) to develop an understanding of intercultural business relationships development, cultural adaptation, and its role in the development of trust (Article 1); 2) to develop an appropriate methodological framework for studying business interaction from a cultural and individual perspective (Article 2); 3) to develop an understanding of the role of culture in individual manager’s sensemaking of interaction events in business relationships (Article 3); and 4) to develop an appropriate theoretical framework for studying interactive intercultural business relationships in international industrial markets (Article 4). The ontological and epistemological foundations are built on the interpretivist/ social constructivist view of reality. Interaction, in this study, is seen as being conducted between individuals, who are the key representative actors of their firms. In turn, culture is regarded both as an independent context existing prior to the individuals’ participation in it, and as knowledge incorporated by the individuals, who use it in sensemaking and interaction across cultures. The methods applied in the articles are: an interpretive qualitative study (Article 1), a literature review and conceptual analysis (Article 2), a structural analysis of the narratives and a metaphor analysis (Article 3), and a literature review and conceptual analysis (Article 4). The main contributions are the following. First, it contributes to business marketing literature by developing the theoretical, conceptual, and methodological underpinning of IMP theories in relation to culture. Second, the thesis contributes to the growing literature on managerial sensemaking in industrial markets by looking at it from a cultural perspective, as well as emphasizing the importance of figurative language in cultural sensemaking.

Elinkaarihankkeen rakennusliikeriskit

Tiivistelmä: Elinkaaren palvelumallit ovat suosittuja julkisten palveluiden hankintamuotoja Iso-Britanniassa. PPP–malli on yksi monista julkisten palvelujen kumppanuusmalleista, josta on tullut joissakin kunnissa yhä suositumpi hankintamalli myös Suomessa. Tämä on seurausta kuntien tiukasta taloustilanteesta, jossa PPP–hankkeen katsotaan mahdollistavan julkisen sektorin investoinnit joutumatta leikkaamaan muita pakollisia hankintoja. Kuitenkin koko elinkaaren kattavat palvelutarjonnan hankintamallit ovat vielä melko uusia malleja ja meillä on tarve löytää toimivia sopimusmalleja ja käytäntöjä, jotta hankkeista saadaan rakennusliikettä kiinnostavia liiketoimintamalleja. Ulkomailla elinkaarihankkeista on tehty monia tutkimuksia ja konsultit ovat kääntäneet niitä omiin tarkoituksiinsa sopiviksi. Kuitenkin Suomen lainsäädäntö on erilainen julkisten palveluiden tuottamisessa, erityisesti lakisääteisissä terveydenhuoltopalveluissa, vesi- ja jätevesihuollossa, vankeinhoidossa, ja niin edelleen. Tästä näkökulmasta ulkomailla tehdyt tutkimukset eivät sellaisenaan sovi Suomeen käytettäviksi. Esimerkiksi tutkimuksissa esitetään, että elinkaarihankkeet tuottavat pitkän aikavälin kassavirtaan, mutta tämä etu koskee vain rahoittaja ja kiinteistöpalvelu yrityksiä - ei rakennusyritystä. Tutkimuksissa mainitaan myös muista elinkaarihankkeiden mahdollisuuksista, jotka jäävät kuitenkin rakennusliikkeen näkökulmasta epäselviksi. Perinteisiin rakennuttamisen malleihin verrattuna elinkaarihankkeiden sopimusmenettelyt ovat monimutkaisempia sekä aikaa vievempiä ja sopijaosapuolten yhteistyö elinkaarihankkeissa on välttämätöntä. Käytännössä elinkaarihankkeiden riskienjako nähdään julkisen sektorin ja yksityisen sektorin välillä yksipuoliseksi. Jotta elinkaarimalli yleistyisi Suomessa, niin elinkaarisopimuksen riskienjaosta on tehtävä tasapuolinen ja käyttäjä pitää saada myös riskejä kantamaan. Tässä työssä keskitytään arvioimaan elinkaarimallien keskeisiä menestystekijöitä ja riskitekijöitä ja löytää mahdollisia tapoja tehdä hankintaprosessista helppoa ja sujuvaa. Samalla yritetään selvittää, miten elinkaarihankkeesta saadaan rakennusliikkeen kannalta menestyvää liiketoimintaa. Johtopäätökset perustuvat aikaisempiin tutkimuksiin ja empiiriseen tapaustutkimukseen. Työssä arvioidaan niitä seikkoja, jotka vaikuttavat yksityisen sektorin tarjouspäätökseen. Arvioinnissa erotetaan toisistaan kolme erillistä riskitekijää; tarjouksen tekemisen riskit, rakennushankkeen riskit ja elinkaaren aikaiset riskit. Työssä todetaan, että aikaisemmat tutkimukset ovat riittämättömiä rakennusliikkeen riskien arvioimiseen.

Factors Affecting Consumer Investment Intentions. Empirical Evidence from Finland

The thesis aims to build a theoretical model to explain consumer investment intentions in stocks and investment funds. The model examines the relationships between subjective investment knowledge, expected sacrifice, expected investment value, compatibility, perceived behavioral control and investment intentions. The data was collected via web-based survey and consisted of 45- to 65-year-old Finnish consumers (n=154). Confirmatory factor analysis (CFA), structural equation modeling (SEM) and t-tests were applied in analyzing the data. The results suggest that among average household consumers expected investment value consists of three dimensions, namely, economic, functional, and emotional, whereas expected sacrifice consists of effort, financial risk, source risk, and psychological risk. Two structural models were assessed, one for stock investments and one for investment funds. Whereas the models presented somewhat different outcomes, in both models compatibility had an essential role in explaining consumer investment intentions. Compatibility was affected by expected investment value and expected sacrifice. Subjective investment knowledge impacted consumers’ evaluations of the value and sacrifices. The effect of perceived behavioral control on investment intentions was rather small, however significant. Moreover, the results suggest that there are significant differences between consumers with no investment experience and consumers with investment experience in subjective investment knowledge, the dimensions of expected sacrifices and expected investment value, perceived behavioral control, compatibility and investment intentions.

Open innovation model for a large company in the ICT industry: Case Ericsson LMF

Open innovation paradigm states that the boundaries of the firm have become permeable, allowing knowledge to flow inwards and outwards to accelerate internal innovations and take unused knowledge to the external environment; respectively. The successful implementation of open innovation practices in firms like Procter & Gamble, IBM, and Xerox, among others; suggest that it is a sustainable trend which could provide basis for achieving competitive advantage. However, implementing open innovation could be a complex process which involves several domains of management; and whose term, classification, and practices have not totally been agreed upon. Thus, with many possible ways to address open innovation, the following research question was formulated: How could Ericsson LMF assess which open innovation mode to select depending on the attributes of the project at hand? The research followed the constructive research approach which has the following steps: find a practical relevant problem, obtain general understanding of the topic, innovate the solution, demonstrate the solution works, show theoretical contributions, and examine the scope of applicability of the solution. The research involved three phases of data collection and analysis: Extensive literature review of open innovation, strategy, business model, innovation, and knowledge management; direct observation of the environment of the case company through participative observation; and semi-structured interviews based of six cases involving multiple and heterogeneous open innovation initiatives. Results from the cases suggest that the selection of modes depend on multiple reasons, with a stronger influence of factors related to strategy, business models, and resources gaps. Based on these and others factors found in the literature review and observations; it was possible to construct a model that supports approaching open innovation. The model integrates perspectives from multiple domains of the literature review, observations inside the case company, and factors from the six open innovation cases. It provides steps, guidelines, and tools to approach open innovation and assess the selection of modes. Measuring the impact of open innovation could take years; thus, implementing and testing entirely the model was not possible due time limitation. Nevertheless, it was possible to validate the core elements of the model with empirical data gathered from the cases. In addition to constructing the model, this research contributed to the literature by increasing the understanding of open innovation, providing suggestions to the case company, and proposing future steps.

Two-phase flow measurements with spacer grid in a rod bundle geometry

Heat transfer effectiveness in nuclear rod bundles is of great importance to nuclear reactor safety and economics. An important design parameter is the Critical Heat Flux (CHF), which limits the transferred heat from the fuel to the coolant. The CHF is determined by flow behaviour, especially the turbulence created inside the fuel rod bundle. Adiabatic experiments can be used to characterize the flow behaviour separately from the heat transfer phenomena in diabatic flow. To enhance the turbulence, mixing vanes are attached to spacer grids, which hold the rods in place. The vanes either make the flow swirl around a single sub-channel or induce cross-mixing between adjacent sub-channels. In adiabatic two-phase conditions an important phenomenon that can be investigated is the effect of the spacer on canceling the lift force, which collects the small bubbles to the rod surfaces leading to decreased CHF in diabatic conditions and thus limits the reactor power. Computational Fluid Dynamics (CFD) can be used to simulate the flow numerically and to test how different spacer configurations affect the flow. Experimental data is needed to validate and verify the used CFD models. Especially the modeling of turbulence is challenging even for single-phase flow inside the complex sub-channel geometry. In two-phase flow other factors such as bubble dynamics further complicate the modeling. To investigate the spacer grid effect on two-phase flow, and to provide further experimental data for CFD validation, a series of experiments was run on an adiabatic sub-channel flow loop using a duct-type spacer grid with different configurations. Utilizing the wire-mesh sensor technology, the facility gives high resolution experimental data in both time and space. The experimental results indicate that the duct-type spacer grid is less effective in canceling the lift force effect than the egg-crate type spacer tested earlier.

Profitability differences between online and offline retailers -An empirical study on European SMEs

Tämän pro gradu tutkielman tarkoituksena oli selvittää jos ja miten kannattavuus eroaa verkko- ja kivijalkakauppojen välillä. Lisäksi pyrittiin selvittämään onko näiden erojen syitä mahdollista selvittää yritysten taloudellisten tunnuslukujen avulla. Tutkielma koostuu kirjallisuuskatsauksesta ja kvantitatiivisesta tutkimuksesta. Kirjallisuuskatsaus antaa yleiskuvan siitä miten verkkokaupan toiminta eroaa kivijalkaliikkeen toiminnasta ja mitkä ovat näistä eroista koituvat hyödyt ja yleisimmät sudenkuopat. Kvantitatiivisessa tutkimuksessa käytetään Amadeus tietokannasta kerättyjä taloudellisia tietoja Eurooppalaisista verkko- ja kivijalkakaupoista. Tutkimuksessa löydettiin tilastollisesti merkitseviä eroja verkko- ja kivijalkakauppojen kannattavuudessa. Verkkokauppojen todettiin olevan kivijalkakauppoja kannattavampia, mutta taloudellisten tunnuslukujen tilastollisella analysoinnilla ei kyetty löytämään yksittäisiä selittäviä tekijöitä näille eroille.

Suomessa ja Itävallassa toimivien liiketoimintamallien siirrettävyys puupohjaisen uusiutuvan energian tuotantoon Puolaan, Romaniaan ja Slovakiaan

Tutkimus kuvaa tiedon, osaamisen ja teknologian siirtoa Suomesta ja Itävallasta Puolaan, Romaniaan ja Slovakiaan hajautetussa puupohjaisessa sähkö- ja lämpöenergian tuotannossa. Metsävaroiltaan rikas ja bioenergia-asioissa toimintatavoiltaan edistynyt Suomi toimi Metsäntutkimuslaitoksen (nykyisin Luonnonvarakeskus) johdolla tutkimuksen empiirisen aineiston tuottaneen kehittäjäverkostohankkeen pääkoordinaattorina vuosina 2011-2014. Tutkimusmenetelmänä käytettiin hankkeen dokumentaation sisällönanalyysiä. Itävalta on tunnettu edistyksellisistä bioenergia-alan tuki- ja ohjausjärjestelmistä. Suomi ja Itävalta kuuluvat EU:n viiden edistyneimmän maan joukkoon uusiutuvien energialähteiden hyödyntämisessä. Tämän työn tavoitteena oli selvittää, miten Suomessa ja Itävallassa hyvin toimivia liiketoimintamalleja voidaan siirtää kohdemaihin puupohjaisen uusiutuvan energian tuotannossa hyödynnettäviksi. Työssä kuvataan tiedonsiirtäjämaiden eli Suomen ja Itävallan ydinosaaminen kiinteän biomassan energiantuotannossa politiikkatasolta käytännön liiketoiminnan tasolle. Lisäksi työssä analysoidaan poliittisen ohjauksen merkitystä alan kehittämisessä, missä käydään läpi maakohtaiset uusiutuvan energian toimintasuunnitelmat vuodelta 2010. Lopuksi arvioidaan tiedonsiirtäjä- ja tiedonhyödyntäjämaiden välisiä eroavaisuuksia kyseisellä liiketoiminta-alueella, ja onko olemassa sellaisia tekijöitä, mitkä estävät tiedonsiirtoa tai hyväksi todettujen liiketoimintamallien soveltamista kohdemaissa. Kussakin maassa metsänomistusolosuhteet ratkaisevat kiinteän biomassan tarjonnan toimivuuden eli tilanteen toimitusketjun alkupäässä. Tuotannon ohjauksen pyrkimys on myös hyödyntää mekaanisen puunjalostuksen sivutuotevirrat mahdollisimman tarkoin energiantuotannon tarpeisiin. Yleiset taloudelliset suhdanteet vaikuttavat ketjun toimivuuteen ja tehokkuuteen. Yksin energiantuotannon tarpeisiin puunkorjuuta ei kannata suunnitella, koska se harvemmin erikseen toteutettuna on kannattavaa liiketoimintaa. Puun käyttö energiantuotantoon tarvitsee hyvin suunniteltua tuki- ja ohjausjärjestelmää, joista kansalliset hallitukset vastaavat. Suomalainen tuotannon suunnittelun ja ohjauksen ajattelutapa sekä itävaltalainen energiapuun varastointi biomassan logistiikkakeskuksiin koettiin kohdemaiden yrittäjäkunnassa varteenotettavimpina liiketoiminnan kehittämisvaihtoehtoina paikallisissa toimintaympäristöissä. Lean-tuotantoajatteluun kuuluva hukan poistaminen toimitusketjusta liittyy mm. varastonhallinnan järjestelyihin ja sivutuotevirtojen hyödyntämiseen. Näitä piirteitä oli myös löydettävissä tiedonhyödyntäjämaiden yritysten toiminnassa hankkeen toteutuksen aikana.

Toimitusvarmuuden kehittäminen aikatauluhallinnan ja tavaravirran ohjauksen menettelyillä

Vuonna 2009 Kespron horeca-tuotteille perustettiin oma keskusvarasto, jolloin logistiikka- ja ostotoiminnot eriytettiin vähittäiskaupan toiminnoista säilyttäen synergiaetuja. Tilaus-toimitusketjun vaatimukset ovat lisääntyneet jatkuvasti ja se on luonut painetta aikatauluhallinnan merkitykselle. Ruuhka-Suomen asiakkaille on paine toimittaa tuotteet entistä nopeammin kilpailukyvyn takaamiseksi. Tämän diplomityön tavoitteena oli tutkia ruokaputken toimitusvarmuuden heikoimpia kohtia aikatauluhallinnan ja tavaravirran ohjauksen näkökulmista. Lisäksi varastonohjausparametrien paikkansapitävyys nostettiin tutkimuksessa esille, jotta kehitysehdotuksia ja malleja toiminnan kehittämiselle voitiin luoda. Tutkimuksen tavoitteeseen pääsemiseksi ajettiin runsaasti logistista dataa varastoinnista ja kellonajoista sekä analysoitiin näitä erilaisten parametrien valossa. Tarkasteltavina ajanjaksoina käytettiin vuoden 2014 lokakuuta ja osittain pääsiäistä. Raportti sisältää tutkimusta tukevan teoriakatsauksen ja yrityksen toimintaa käsittelevän empiirisen osuuden, joka perustuu vahvasti kvantitatiiviseen tutkimukseen sisältäen kuitenkin runsaasti haastatteluja ja keskusteluja. Tämän tutkimuksen tuloksena todettiin, että aikatauluhallintaa tulee kehittää tavaravirtojen oikea-aikaisen kohtaamisen mahdollistamiseksi. Lisäksi järjestelmätuen kehittäminen yhdessä varastonohjauksen ja tilausaikojen kanssa ovat todistetusti yhteydessä aikatauluhallinnan kehittämisen kanssa. Merkittävä havainto kehityksen kannalta oli toimittajien ja tuoteryhmien pilkkominen omiksi kokonaisuuksiksi ja tätä kautta aikatauluhallinnan ja tavaravirtojen ohjauksen kehittäminen. Näiden havaittujen kehittämispainopisteiden pohjalta on luotu myös mittari, jolla voitaisiin vaihtoehtoisesti mitata toimittajan kyvykkyyttä suhteutettuna varaston puutekeräystyöhön. Työ antaa hyödynnettävää tietoa ja kehitysideoita toimitusvarmuuden parantamiseksi aikatauluhallinnan menetelmillä.

Translational models of coronary artery disease, myocardial infarction and heart failure. Development, validation and in vivo imaging studies using positron emission tomography

Coronary artery disease is an atherosclerotic disease, which leads to narrowing of coronary arteries, deteriorated myocardial blood flow and myocardial ischaemia. In acute myocardial infarction, a prolonged period of myocardial ischaemia leads to myocardial necrosis. Necrotic myocardium is replaced with scar tissue. Myocardial infarction results in various changes in cardiac structure and function over time that results in “adverse remodelling”. This remodelling may result in a progressive worsening of cardiac function and development of chronic heart failure. In this thesis, we developed and validated three different large animal models of coronary artery disease, myocardial ischaemia and infarction for translational studies. In the first study the coronary artery disease model had both induced diabetes and hypercholesterolemia. In the second study myocardial ischaemia and infarction were caused by a surgical method and in the third study by catheterisation. For model characterisation, we used non-invasive positron emission tomography (PET) methods for measurement of myocardial perfusion, oxidative metabolism and glucose utilisation. Additionally, cardiac function was measured by echocardiography and computed tomography. To study the metabolic changes that occur during atherosclerosis, a hypercholesterolemic and diabetic model was used with [18F] fluorodeoxyglucose ([18F]FDG) PET-imaging technology. Coronary occlusion models were used to evaluate metabolic and structural changes in the heart and the cardioprotective effects of levosimendan during post-infarction cardiac remodelling. Large animal models were used in testing of novel radiopharmaceuticals for myocardial perfusion imaging. In the coronary artery disease model, we observed atherosclerotic lesions that were associated with focally increased [18F]FDG uptake. In heart failure models, chronic myocardial infarction led to the worsening of systolic function, cardiac remodelling and decreased efficiency of cardiac pumping function. Levosimendan therapy reduced post-infarction myocardial infarct size and improved cardiac function. The novel 68Ga-labeled radiopharmaceuticals tested in this study were not successful for the determination of myocardial blood flow. In conclusion, diabetes and hypercholesterolemia lead to the development of early phase atherosclerotic lesions. Coronary artery occlusion produced considerable myocardial ischaemia and later infarction following myocardial remodelling. The experimental models evaluated in these studies will enable further studies concerning disease mechanisms, new radiopharmaceuticals and interventions in coronary artery disease and heart failure.