Titaanisen valkaisutornin korjaussuunnitelma

Tämän työn tarkoituksena on poistaa toistuvasti esiintyneet vauriot titaanisessa valkaisutornissa Kuusankosken paperitehtailla. Vauriot esiintyivät melko pian käyttöönoton jälkeen ja niitä esiintyi toistuvasti jokaisen korjauksen jälkeen. Jatkuvatoimisen prosessin vuoksi käyttökatkokset eivät olleet suotavia. Aikataulu suunnittelulle ja korjaukselle oli erittäin tiukka, jolloin kenttämittauksia ei ollut mahdollista tehdä laskelmien tueksi. Tämän vuoksi tähän työtön parhaiten soveltuvaksi menetelmäksi valittiin FEA. Alkuperäisessä rakenteessa pääsäiliöön oli hitsattu pintatasku, jota käytettiin välisäiliönä varastoimaan suuri määrä vaarallista nestettä. Tämä aiheutti valkaisutornin vaipalle murtumia ja vuotoja sekä suuronnettomuuden riskin koko valkaisutornille. Kuormitustietojen puutteesta johtuen kuormitukset mallinnettiin virtuaalisesti FE-menetelmällä ja analyyttisin keinoin. Kuormitusten suuruudet arvioitiin konservatiivisesti. Tämän työn tärkein oivallus oli määritellä uudelleen pintataskun toiminto siten, että sitä ei enää käytetty nesteen välivarastona, vaan ohjaimena nesteelle. Tämä innovatiivinen ongelmankorjauskonsepti on havaittu onnistuneeksi, koska vaurioita ei ole enää esiintynyt viimeisimmän korjauksen jälkeen.

Suomalaisten teollisuuden kunnossapitoyritysten investoinnit: analyysi ja skenaariot

Työn tavoitteena oli lisätä ymmärrystä teollisuuden kunnossapidon toimialasta ja sen tulevaisuudesta, tutkimalla teollisuuden kunnossapitoyritysten toteuttamia käyttöomaisuus- ja käyttöpääomainvestointeja vuosilta 2003–2007. Tutkimus toteutettiin tilinpää-tösanalyysin menetelmin suppealla, mutta edustavalla, 20 teollisuuden kunnossapitoyrityksen tilinpäätösaineistolla. Yritysjoukko jaettiin pk-yrityksiin ja suuriin yrityksiin, jolla pyrittiin kuvaamaan toimialan todellisempaa rakennetta. Analyysiosiossa tarkasteltiin toteutuneita investointiasteita, investointilogiikoita, yritysten kannattavuuksia sekä käyttöpääomainvestointien hallintaa. Toteutetun analyysin perusteella luotiin kolme tulevaisuuden skenaariota teollisuuden kunnossapidon toimi-alan kehitykselle. Eri skenaarioille laskettiin ennustemallilla keskimääräiset investointiasteet. Analyysin mukaan teollisuuden kunnossapitoyrityksien liikevaihto kasvoi tutkimusaikavälillä keskimäärin noin 8,5 prosenttia vuodessa. Kyseinen kasvu on vaatinut yrityksiltä noin 2,5 prosentin investointiasteen. Verratessa pk-yrityksiä ja isoja yrityksiä, havaittiin merkittäviä eroja toteutuneissa investointiasteissa sekä investointilogiikoissa. Yhteistä yritysjoukoille oli hyvä kannattavuus, johon eri investointiasteilla ei näyttäisi lyhyellä aikavälillä olevan vaikutusta. Tulevaisuuden investointitarve vaikuttaa maltillisemmalta kuin toteutunut taso, johtuen osaltaan taantuman vaikutuksista.

Dynamic model development of adiabatic compressed air energy storage

The share of variable renewable energy in electricity generation has seen exponential growth during the recent decades, and due to the heightened pursuit of environmental targets, the trend is to continue with increased pace. The two most important resources, wind and insolation both bear the burden of intermittency, creating a need for regulation and posing a threat to grid stability. One possibility to deal with the imbalance between demand and generation is to store electricity temporarily, which was addressed in this thesis by implementing a dynamic model of adiabatic compressed air energy storage (CAES) with Apros dynamic simulation software. Based on literature review, the existing models due to their simplifications were found insufficient for studying transient situations, and despite of its importance, the investigation of part load operation has not yet been possible with satisfactory precision. As a key result of the thesis, the cycle efficiency at design point was simulated to be 58.7%, which correlated well with literature information, and was validated through analytical calculations. The performance at part load was validated against models shown in literature, showing good correlation. By introducing wind resource and electricity demand data to the model, grid operation of CAES was studied. In order to enable the dynamic operation, start-up and shutdown sequences were approximated in dynamic environment, as far as is known, the first time, and a user component for compressor variable guide vanes (VGV) was implemented. Even in the current state, the modularly designed model offers a framework for numerous studies. The validity of the model is limited by the accuracy of VGV correlations at part load, and in addition the implementation of heat losses to the thermal energy storage is necessary to enable longer simulations. More extended use of forecasts is one of the important targets of development, if the system operation is to be optimised in future.

A Web-Based Environmental Toolkit to Support Small and Medium-Sized Enterprises in the Implementation of Their Own Environmental Management System

With small and medium sized-enterprises (SMEs) taking up the majority of the global businesses, it is important they act in an environmentally responsible manner. Environmental management systems (EMS) help companies evaluate and improve their environmental impact but they often require human, financial, and temporary resources that not all SMEs can provide. This research encompasses interviews with representatives of two small enterprises in Germany to provide insights into their understanding, and knowledge of an EMS and how they perceive their responsibility towards the environment. Furthermore, it presents a toolkit created especially for small and medium-sized enterprises that serves as a simplified version of an EMS based on the ISO 14001 standard and is evaluated by the representatives of the SMEs. Some of the findings are: while being open to the idea of improving their environmental impact, SMEs do not always feel it is their responsibility to do so; they seem to lack the means to fully implement an EMS. The developed toolkit is considered useful and usable and recommendations are drawn for its future enhancement.

International Growth Strategies of Small and Medium-Sized Enterprises in Infocom Sector

Tutkimuksen päätavoite on selvitää infocom-toimialan pk-yritysten kansainväliset kasvustrategiat. Aluksi on tarkasteltu kasvua edesauttaneita ja hidastaneita tekijöitä, jotka muodostavat pohjan kansainvälisen kasvun suunnittelulle. Näiden pohjalta on aikaisemmin esitettyihin teoriamalleihin ja yritysten kansainvälistymisen asteeseen yhdistettynä määritelty infocom-toimialan pk-yrityksten kansainväliset kasvustrategiavaihtoehdot. Tutkimuksen tarkasteluun on vaikuttanut born global-ilmiö, jonka pääpiirre on nopea kansainvälistyminen yrityksen aikaisessa kehitysvaiheessa. Työn empiirisessä osassa on havainnollistettu teoriassa käsiteltyjä kansainväliseen kasvuun liittyviä tekijöitä. Empiirisessä osassa on käytetty sekä kvantitatiivisia että kvalitatiivisia menetelmiä. Kvantitatiivinen survey tutkimus on pohjautunut aineistoon, joka on kerätty vuosina 1999-2000 Telecom Business Research Centerissä Lappeenrannassa. Kvalitatiivisessa case-tutkimuksessa on haastateltu infocom-toimialan pk-yrityksiä. Nopeasti kehittyvän infocom-toimialan pk-yrityksille kansainvälistyminen on haaste ja tärkein menestyksen edellytys. Pk-yritysten kasvuresurssit ovat rajalliset, mutta lisääntyvän verkostoitumisen myötä on yritysten välisestä yhteistyöstä saavutettu etuja, jotka ovat mahdollistaneet kansainvälisen kasvun. Markkinoiden muutosnopeus on suuri ja siksi strategisen suunnittelun aikaväli lyhenee. Kansainvälisiä kasvustrategioita muodostettaessa yritykset joutuvat samanaikaisesti turvautumaan useampaan eri kasvustrategiaan, joiden yhdistelmänä yritysten merkittävimmäksi kasvustrategiaksi muodostuvat hybridit kasvustrategiat.

Design and implementation of a multipurpose reactor for scale-up studies

In the theoretical part, the different polymerisation catalysts are introduced and the phenomena related to mixing in the stirred tank reactor are presented. Also the advantages and challenges related to scale-up are discussed. The aim of the applied part was to design and implement an intermediate-sized reactor useful for scale-up studies. The reactor setting was tested making one batch of Ziegler–Natta polypropylene catalyst. The catalyst preparation with a designed equipment setting succeeded and the catalyst was analysed. The analyses of the catalyst were done, because the properties of the catalyst were compared to the normal properties of Ziegler–Natta polypropylene catalyst. The total titanium content of the catalyst was slightly higher than in normal Ziegler–Natta polypropylene catalyst, but the magnesium and aluminium content of the catalyst were in the normal level. By adjusting the siphonation tube and adding one washing step the titanium content of the catalyst could be decreased. The particle size of the catalyst was small, but the activity was in a normal range. The size of the catalyst particles could be increased by decreasing the stirring speed. During the test run, it was noticed that some improvements for the designed equipment setting could be done. For example more valves for the chemical feed line need to be added to ensure inert conditions during the catalyst preparation. Also nitrogen for the reactor needs to separate from other nitrogen line. With this change the pressure in the reactor can be kept as desired during the catalyst preparation. The proposals for improvements are presented in the applied part. After these improvements are done, the equipment setting is ready for start-up. The computational fluid dynamics model for the designed reactor was provided by cooperation with Lappeenranta University of Technology. The experiments showed that for adequate mixing with one impeller, stirring speed of 600 rpm is needed. The computational fluid dynamics model with two impellers showed that there was no difference in the mixing efficiency if the upper impeller were pumping downwards or upwards.

Application of social media and ICT-tools in new and small business ventures.

The current research emphasizes on various questions raised and deliberated upon by different entrepreneurs. It provides a valuable contribution to comprehend the importance of social media and ICT-applications. Furthermore, it demonstrates how to support and implement the management consulting and business coaching start-ups with the help of social media and ICT-tools. The thesis presents a literary review from different information systems science, SME and e-business journals, web articles, as well as, survey analysis reports on social media applications. The methodology incorporated into a qualitative research method in which social anthropological approaches were used to oversee the case study activities in order to collect data. The collaborative social research approach was used to shelter the action research method. The research discovered that new business start-ups, as well as small businesses do not use social media and ICT-tools, unlike most of the large corporations use. At present, the current open-source ICT-technologies and social media applications are equally available for new and small businesses as they are available for larger companies. Successful implementation of social media and ICT-applications can easily enhance start-up performance and overcome business hassles. The thesis sheds some light on effective and innovative implementation of social media and ICT-applications for new business risk takers and small business birds. Key words

Railways, Airports and Sea Container Operators as Publicly Listed Companies – Financial Performance and Shareholder Value Creation Perspective

Logistics infrastructure and transportation services have been the liability of countries and governments for decades, or these have been under strict regulation policies. One of the first branches opened for competition in EU as well as in other continents, has been air transports (operators, like passenger and freight) and road transports. These have resulted on lower costs, better connectivity and in most of the cases higher service quality. However, quite large amount of other logistics related activities are still directly (or indirectly) under governmental influence, e.g. railway infrastructure, road infrastructure, railway operations, airports, and sea ports. Due to the globalization, governmental influence is not that necessary in this sector, since transportation needs have increased with much more significant phase as compared to economic growth. Also freight transportation needs do not correlate with passenger side, due to the reason that only small number of areas in the world have specialized in the production of particular goods. Therefore, in number of cases public-private partnership, or even privately owned companies operating in these sub-branches have been identified as beneficial for countries, customers and further economic growth. The objective of this research work is to shed more light on these kinds of experiments, especially in the relatively unknown sub-branches of logistics like railways, airports and sea container transports. In this research work we have selected companies having public listed status in some stock exchange, and have needed amount of financial scale to be considered as serious company rather than start-up phase venture. Our research results show that railways and airports usually need high fixed investments, but have showed in the last five years generally good financial performance, both in terms of profitability and cash flow. In contrary to common belief of prosperity in globally growing container transports, sea vessel operators of containers have not shown that impressive financial performance. Generally margins in this business are thin, and profitability has been sacrificed in front of high growth – this also concerns cash flow performance, which has been lower too. However, as we examine these three logistics sub-branches through shareholder value development angle during time period of 2002-2007, we were surprised to find out that all of these three have outperformed general stock market indexes in this period. More surprising is the result that financially a bit less performing sea container transportation sector shows highest shareholder value gain in the examination period. Thus, it should be remembered that provided analysis shows only limited picture, since e.g. dividends were not taken into consideration in this research work. Therefore, e.g. US railway operators have disadvantage to other in the analysis, since they have been able to provide dividends for shareholders in long period of time. Based on this research work we argue that investment on transportation/logistics sector seems to be safe alternative, which yields with relatively low risk high gain. Although global economy would face smaller growth period, this sector seems to provide opportunities in more demanding situation as well.

Crowdfunding as a new funding alternative for early stage start-ups

Attracting outside capital is a common problem for start-up companies. Capital markets define the funding options for companies and firms which suffer the most from these capital market imperfections are small start-up companies. Therefore it is important to study any new funding model which can offer a new solution to this inefficiency of capital markets. This study explains the traditional funding models for start-ups such as founders, friends & family, banks, business angels and venture capitalist. After giving background to traditional start-up funding this study delves into crowfunding (CF) and introduces it as a new funding method. The objective of the thesis is to answer one broad research question: Why and how should start-up companies use CF as an alternative funding method? To properly delve into this, this question has the following sub-questions: What kind of funding alternatives do start-up companies have? What are the pros and cons of CF compared to other funding options? How can start-ups benefit from CF? This study gives background on the rise of CF and the reasons why this new model is needed. Author will explain the different components of CF such as platforms, crowdfunders and projects. Also benefits and challenges of the crowdfunding model are investigated. As a new funding model CF has had to clear out many obstacles from its way. These are, for example, legal and regulatory issues as well education of crowd investors to understand this new investment option. . Start-up entrepreneurs can gain valuable insight from this study. The author has attempted to form best practices and guidelines of how to operate in the CF environment. This study was conducted by performing expert interviews, collecting data from previous studies and performing a content analysis of successful crowdfunding cases. Main findings from the study were that CF has huge potential in funding entrepreneurial projects. It is still a niche way for funding but growing rapidly. CF is earning its place among traditional funding options and has potential to fund projects which otherwise would struggle to find funding. With CF entrepreneur can tap into geographically diverse audience. It is a powerful validation tool for products and ideas and has the power to bring democratic elements to entrepreneurial funding.

Timing of Capacity Change: Models for Capital Intensive Industry

The suitable timing of capacity investments is a remarkable issue especially in capital intensive industries. Despite its importance, fairly few studies have been published on the topic. In the present study models for the timing of capacity change in capital intensive industry are developed. The study considers mainly the optimal timing of single capacity changes. The review of earlier research describes connections between cost, capacity and timing literature, and empirical examples are used to describe the starting point of the study and to test the developed models. The study includes four models, which describe the timing question from different perspectives. The first model, which minimizes unit costs, has been built for capacity expansion and replacement situations. It is shown that the optimal timing of an investment can be presented with the capacity and cost advantage ratios. After the unit cost minimization model the view is extended to the direction of profit maximization. The second model states that early investments are preferable if the change of fixed costs is small compared to the change of the contribution margin. The third model is a numerical discounted cash flow model, which emphasizes the roles of start-up time, capacity utilization rate and value of waiting as drivers of the profitable timing of a project. The last model expands the view from project level to company level and connects the flexibility of assets and cost structures to the timing problem. The main results of the research are the solutions of the models and analysis or simulations done with the models. The relevance and applicability of the results are verified by evaluating the logic of the models and by numerical cases.

Core Competence of a Small or Medium Sized Content Providing Company Operating in the Information and Communication Technologies Secto

Tutkimuksen tavoitteena on tarkastella tekijöitä, joista ydinosaaminen muodostuu, sekä sitä kuinka yritykset voisivat parhaiten hyödyntää omia resurssejaan ja osaamistaan tunnistetun ydinosaamisen avulla. Teoria osuudessa käydään läpi kuinka ydinosaaminen on kirjallisuudessa määritelty ja miten yritykset voivat sen määritellä sisäisesti itselleen. Empiirisessä osiossa käydään läpi Telecom Business Research Centerissä tehdyn kvantitatiivisen selvityksen pohjalta valitut kolme sisällöntuottaja case - yritystä sekä kuvataan näiden osaamista. Tiedot yrityksistä perustuvat niiden edustajille tehtyihin haastatteluihin ja heidän käsitykseensä omasta yrityksestään. Tämä näkemys on tutkimuksen kannalta äärimmäisen relevanttia, koska ydinosaamisen määrittely tehdään yrityksessä sisäisesti juuri haastatellun kaltaisten yrityksen ydintoimijoiden toimesta. Varsinaisten case -yritysten lisäksi käydään läpi käytännön tapaus action-oriented -tutkimusosuudessa. Tutkimusta ja siinä käsiteltyjä esimerkkejä tulisi hyödyntää yrityksen oman ydinosaamisselvityksen apuna prosessin varrella.

Evaluation and realisation of a market entry method: The entry of a small high technology company into the British construction software markets

Tutkielman tavoitteena on tutkia, mikä olisi parhaiten case-yritykselle sopiva menetelmä tulla tekemään kauppaa ulkomaan markkinoille. Kaikki yleiset kansainvälisille markkinoilletulomenetelmät esitetään ja niiden edut ja haitat tuodaan esille. Selvittäessä tehtävänantajayrityksen resurssit, odotukset ja vaatimukset todetaan, että yhteistyössä tehtävä markkinoilletulo on pätevin vaihtoehto. Tämän jälkeen valitaan parhaiten tarkoitukseen sopiva yritys ennalta valitusta yritysvaihtoehtojen ryhmästä ja testataan tämän yrityksen yhteistyösopivuus case-yrityksen kanssa. Yritysten välinen yhteistyösopivuus arvioidaan analysoimalla yritykset haastattelujen avulla ja tutkielmassa esitettyjen teorioiden avulla. Sopivuus todetaan hyväksi, kattaen 71 prosenttia analysoiduista kohdista. Kaksikymmentäyhdeksän prosenttia kohdista todetaan kohdiksi, joissa yritysten välinen yhteisymmärrys ei ole toimeksiantajayrityksen minimivaatimukset täyttävää. Näitä kohtia tullaan käyttämään suunnittelun pohjana kun suunnitellaan jatkoneuvotteluja yhteistyön käynnistämiseksi.

Preconditions for Successful Global Sourcing and Production Ramp up

Työn tavoitteena oli tutkia The Switch Drive Systems Oy:n edellytyksiä globaalille hankintatoiminnalle ja tuotannon aloittamiselle Kiinassa. Lisäksi pyrittiin keräämään empiiristä tietoa ja palautetta yrityksen prosesseista niiden kehittämistä varten. Yrityksen tuotantostrategia perustuu mallitehdaskonseptiin ja yrityksellä on kaksi mallitehdasta Suomessa. Työ keskittyy tutkimaan näiden mallitehtaiden valmiuksia aloittaa globaali ja ulkoistettu sarjatuotanto. Tutkimus suoritettiin empiirisenä tutkimuksena haastattelemalla yhteensä yhdeksää edustajaa yrityksen kolmesta yksiköstä Suomessa. Empiirinen tutkimus perustui riskienhallinnan keinoihin. Kvantitatiivisen tutkimuksen tarkoituksena oli kartoittaa merkittävimmät riskit tarkempaa tarkastelua varten. Kvalitatiivisen tutkimuksen tavoitteena oli löytää syitä merkittävimmille riskeille. Tutkimuksen keskeisimmäksi tulokseksi on saatu lista merkittävimmistä syistä, jotka vaikeuttavat yrityksen tuotantostrategian toteuttamista. Lisäksi tuloksia ovat kvantitatiiviset tulokset merkittävimmistä riskeistä ja niihin liittyvät syyseuraussuhteet.

Prediction of neurodevelopment and neuromotor trajectories in very preterm born children up to 11 years of age: PIPARI Study

Very preterm birth is a risk for brain injury and abnormal neurodevelopment. While the incidence of cerebral palsy has decreased due to advances in perinatal and neonatal care, the rate of less severe neuromotor problems continues to be high in very prematurely born children. Neonatal brain imaging can aid in identifying children for closer follow-up and in providing parents information on developmental risks. This thesis aimed to study the predictive value of structural brain magnetic resonance imaging (MRI) at term age, serial neonatal cranial ultrasound (cUS), and structured neurological examinations during the longitudinal follow-up for the neurodevelopment of very preterm born children up to 11 years of age as a part of the PIPARI Study (The Development and Functioning of Very Low Birth Weight Infants from Infancy to School Age). A further aim was to describe the associations between regional brain volumes and long-term neuromotor profile. The prospective follow-up comprised of the assessment of neurosensory development at 2 years of corrected age, cognitive development at 5 years of chronological age, and neuromotor development at 11 years of age. Neonatal brain imaging and structured neurological examinations predicted neurodevelopment at all age-points. The combination of neurological examination and brain MRI or cUS improved the predictive value of neonatal brain imaging alone. Decreased brain volumes associated with neuromotor performance. At the age of 11 years, the majority of the very preterm born children had age-appropriate neuromotor development and after-school sporting activities. Long-term clinical follow-up is recommended at least for all very preterm infants with major brain pathologies.

Development of FDI Climate in Russia and Estonia in the Post-Soviet Era

Tämän diplomityön tavoite on selvittää Venäjän ja Viron investointi-ilmapiirien kehitystä suorien ulkomaisten investointien osalta. Tarkastelujakson pituus on Neuvostoliiton hajoamisesta tähän päivään. Työn teoriaosassa käydään läpi suoran ulkomaisen investoinnin määritelmä ja siihen liittyviä teorioita sekä investointi-ilmapiirin käsite ja osatekijät. Venäjälle ja Viroon tulleiden suorien ulkomaisten investointien vuosittaista kehitystä tarkastellaan empiirisen osan alussa. Diplomityön loppuosassa käydään läpi erilaisia taloustieteellisiä mittareita, jotka kuvaavat investointi-ilmapiirin tai ainakin joidenkin sen osatekijöiden kehittymistä. Kyseisiä mittareita on lopulta verrattu investointivirtoihin ja samalla on etsitty mahdollisia korrelaatioita. Mittarit paljastavat eroja Venäjän ja Viron investointi-ilmapiirien kehityksissä. Ne selittivät ainakin osittain suorienulkomaisten investointien virtoja Venäjälle ja Viroon.