Hankinnan prosessien systemaattinen kehittäminen

Tämän pro gradu -tutkielman tavoitteena oli standardoida ja kehittää hankinnan prosesseja systemaattisesti. Prosessien standardoiminen edesauttaa organisaation itseohjautuvuutta ja parantaa organisaation kyvykkyyttä. Tämä tutkielma tuottaa uutta tutkimustietoa tutkimusaukkoon hankinnan prosessien systemaattisesta kehittämisestä. Tutkielman teoriaosassa käsitellään prosessiajattelua, ISO 9001 standardin vaikutusta hankintatoimintaan, tunnistetaan hankinnan prosesseja ja esitetään erilaisia hankinnan prosesseihin soveltuvia LEAN Six Sigma kehitystyökaluja. Tutkielman empiirinen osio on toteutettu toimeksiantona suurelle teollisuusyritykselle. Tämän tutkielman empiirisessä osiossa on yhdistelty kvalitatiiviselle ja kvantitatiiviselle tutkimukselle ominaisia tutkimusmetodologioita. Tutkimusmetodologioiden yhdisteleminen tuottaa lisäarvoa tutkielman toteutukselle ja parantaa työn luotettavuutta. Tässä tutkielmassa käytetyt tutkimusmenetelmät koostuvat kvantitatiiviselle tutkimukselle ominaisesta kyselystä hankinnan prosessien nykytilan selvittämiseksi sekä kvalitatiivisen tutkimuksen tutkimusmenetelmille ominaisesta tapaustutkimuksesta. Kyselyn avulla muodostettiin analyysi hankinnan prosessien nykytilasta, jonka pohjalta toimeksiantajayritykselle ehdotettiin kehitettäviä hankinnan prosesseja. Lopulliseksi kehityskohteeksi valittu prosessi määriteltiin aivoriihessä kerätyn tiedon perusteella kehityspotentiaalin esille tuovasta nelikentästä. Kehitettävä prosessi asemoitui samalla tapaustutkimuksella tutkittavaksi tapaukseksi. Kehitettäväksi prosessiksi valittiin saapuvan tavaran vastaanotto ja visuaalinen tarkastaminen. Prosessia kehitettiin mallintamalla ja LEAN Six Sigma menetelmiä hyödyntäen. Prosessimallinnuksen sekä LEAN Six Sigma menetelmien tueksi kerättiin tietoa aivoriihistä ja teemahaastatteluista. Tutkielman tuloksena toimeksiantajayritys sai kokonaiskuvan hankinnan prosessien nykytilasta, kehitetyn tavoiteprosessin ja työohjeen saapuvan tavaran vastaanotolle ja visuaaliselle tarkastukselle sekä jatkossa hankinnan prosessien standardoimista ja kehittämistä helpottavan hankinnan prosessin systemaattisen kehittämismallin. Hankinnan prosessin systemaattinen kehittämismalli on uutta tutkimustietoa, joka asemoituu hankinnan prosessien kehittämisen tutkimusaukkoon. Hankinnan prosessin systemaattista kehittämismallia ei tämän tutkielman pohjalta voida yleistää, koska tutkielma on toteutettu toimeksiantajayrityksen lähtökohdista. Johtopäätöksenä voidaan todeta, että toimeksiantajayritys, muut organisaatiot sekä tutkimuskenttä tarvitsevat lisää tietoa hankinnan prosessien kehittämisestä. Hankinnan prosessien kehittämistä tulisi tutkia enemmän ja erityisesti tässä tutkielmassa esitettyä kehittämismallia tulisi jatkossa testata niin, että kehittämismallin toimivuus voitaisiin yleistää.

Recovery and purification of anthocyanins from purple-blue potato

The aim of this work was to study techniques to extract and purify of anthocyanins from purple-blue potato. This topic was determined as a master’s thesis and it was done in collaboration with the Food Chemistry and Food Development Department of University of Turku and Department of Chemical and Process Engineering at Lappeenranta University of Technology. At first, purple-blue potatoes were pretreated in four types of boiled, raw, freeze-dried and dried boiled potato for extraction. They were mixed with aqueous acidified ethanol (ethanol:water:acetic acid 40%:53%:7% v/v) for conventional extraction. Boiled potato was selected as a best pretreated potato. Different ethanol concentration and extraction time were examined and the mixture of 80% in 24 h resulted in maximum anthocyanin content (132.23 mg/L). As conventional extraction method of anthocyanins was non-selective, some of impurities such as free sugars might accelerate anthocyanin degradation. Therefore, to obtain anthocyanins in purified form, adsorption as a promising selective method was used to recovery and isolate anthocyanins. It was carried out with six adsorbents. Among those, Amberlite XAD-7HP, a nonionic acrylic ester adsorbent, was found to have the best performance. In an adsorption column, flow rate of 3 mL/min was selected as the loading flow rate among four tested flow rates. Eluent volume and flow rate were 3 BV of aqueous acidified ethanol (75%, v/v) and 1 mL/min for desorption. The quantification of the total anthocyanin contents was performed by pH-differential method using UV-vis spectrophotometer. The resulting anthocyanin solution after purification was almost free from free sugars which were the major cause for degradation of anthocyanins. The average anthocyanin concentration in the purified and concentrated sample was obtained 1752.89 mg/L.

Liiketoimintaprosessien mallinnuksen edellytykset suuressa tehdasyksikössä

In the theoretical part of this master’s thesis business process management and process modeling and the benefits and challenges related are discussed. The empirical part consists of two parts. The first one is a case study about process management and modeling and the second one presents the outcomes from a modeling project that was executed for the employer of this thesis. In the project the target mill unit’s business processes were identified, a process map was conducted and process architecture for further use was established. In the outcomes of the study challenges and possibilities of process management and modeling as well as possible reasons for these prejudices are discussed based on the case study and the modeling project. From the research of this thesis a framework for successful process modeling is established. The framework highlights four most important sectors that an organization should evaluate before and during the modeling project.

Innovaatiojohtaminen ja sen vaikutuksia metsäteollisuudessa

Työn tavoitteena on selvittää metsäteollisuuden innovaatiotoiminnan johtamisprosessia ja sen vaikutuksia yksittäisissä innovaatioissa. Tarkoituksena on tuoda esiin uutta tietoa metsäteollisuuden innovaatiotoiminnan nykytilasta, innovaatiojohtamisesta ja sen merkittävimmistä tekijöistä, sekä analysoida tätä tietoa toiminnan kehittämiseksi. Yrityshaastattelujen avulla työssäselvitetään johtamisprosessia ja sen toimintoja, sekä siihen vaikuttavia sisäisiä ja ulkoisia tekijöitä. Innovaatiojohtamisen vaikutuksista tutkitaan kaupallistettujen innovaatioiden kehitysaikoja ja eri yhteistyösuhteiden merkitystä SIN-mallin (System Integration and Networking) mukaan. Työssä havaittiin, että metsäteollisuusyritykset ovat viime vuosina jossain määrin alkaneet kehittää innovaatiotoimintaansa, mutta systemaattisempi innovaatioprosessi ja selkeät strategiset suuntaukset toiminnan ohjaamiseen ja prosessin hallintaan puuttuvat. Innovaatiotoiminnan epäjärjestelmällisyyteen vaikuttaa ristiriita eri aikavälien tavoitteissa: toisaalta yritykset tavoittelevat nopeasti kustannustehokkuutta ja toisaaltapitkäjänteisempää uudistumista. Tärkeimpiä yhteistyökumppaneita innovaatiotoiminnassa ovat asiakkaat, alihankkijat ja toimittajat. Verkostoituminen, innovaatioprosessin tehokkuus ja kyky tuottaa menestyviä innovaatioita korostuvat tulevaisuudessa. Lisäksi innovaatiojohtamisella on tuettava innovaatioiden lähteitä ja radikaalimpia innovaatioita, sekä pyrittävä alentamaan muutosvastarintaa.

Voimalaitoskytkennän lämpö-ja virtaustekninen optimointi teollisuusprosessiin

Diplomityössä on selvitetty UPM-Kymmene-konserniin kuuluvan Voikkaan paperitehtaan höyryvoimalaitoksen liityntärajapintaa paperikoneprosessiin. Selvitys tehtiin, koska nykyinen voimalaitos on suunniteltu korvattavaksi uudella lähivuosina. Työn teoriaosassa tarkastellaan mm. eri voimalaitostyyppejä, prosessivoimalaitoksen säätöjärjestelmiä sekä väliottovastapaineturbiinilta saatavan sähkötehon laskemiseksi tarvittavaa teoriaa. Käytännössä suurin työ on tehty nykyisen tuotantoprosessin voimalaitokselle asettamien vaatimusten selvittämisessä. Tämä on toteutettu tarkastelemalla online-mittauspositioita hyödyntäen laitoksen eri historiatietokantoja. Tulevan voimalaitoksen väliottovastapaineturbiinilta saatavaa sähkötehoa on tarkasteltu vuoden 2000 prosessihöyryn massavirtoihin perustuen. Kirjalliseen työhön on sisällytetty kuvaajat prosessin tärkeimmistä tila-arvoista. Yksityiskohtainen rajapinnan tarkastelu kuvaajineen ja lukuarvoineen on toimitettu diplomityöpaikalle tiedostomuodossa.

Kiinteäkerroskaasuttimen toiminnan teoreettinen tarkastelu ja puupellettien kaasutuskokeet myötävirtareaktorilla

Tämä työ on osa tutkimusprojektia, jonka tarkoituksena on kehittää uudentyyppinen kaasutustekniikkaan perustuva kiinteistöjen lämmitysjärjestelmä. Työ on tehty osaksi kirjallisuustutkimuksena käyttämällä hyödyksi alalla tehtyjä tutkimuksia ja kirjallisuutta. Kirjallisuustutkimuksen tavoitteena oli luoda yhtenäinen tietopaketti lämmitysjärjestelmän kehityksen tueksi. Työn kokeellisen osion tavoitteena oli tutkia lämmitysjärjestelmän kaasuttimen prototyypin toimintaa ja selvittää sen käyttöön liittyviä ongelmia. Kirjallisuusosiossa käsitellään kaasutuksen vaiheita: alkulämpeneminen ja kuivuminen, syttyminen, pyrolyysi sekä jäännöshiilen palaminen ja kaasutus. Varsinkin pyrolyysiprosessin tunteminen on merkittävää, kun halutaan parantaa biomassan poltto- ja kaasutusprosessien suunnittelua. Lisäksi kirjallisuusosiossa käsitellään kaasutuksessa syntyvän tuotekaasun ominaisuuksia: koostumus, lämpöarvo, tiheys ja palamisominaisuudet. Tuotekaasun ominaisuudet vaihtelevat suuresti kaasutusprosessista ja -olosuhteista sekä polttoaineesta riippuen. Tuotekaasun kohdalta käsitellään myös sen käyttökohteita. Perinteisesti kaasutuksen tuotekaasua käytetään lämmöntuotantoon, mutta tulevaisuuden haasteena on tuotekaasun käyttö kaasuturbiineissa sähköntuotantoon. Tuotekaasun käyttöä laajemmin rajoittaa sen sisältämät epäpuhtaudet. Tämän vuoksi kirjallisuusosiossa käsitellään myös tuotekaasun puhdistusmenetelmiä ja sen poltossa syntyvien päästöjen vähentämiskeinoja. Kokeellisessa osiossa suoritettiin puupellettien kaasutuskokeita TTKK:n Energia- ja prosessitekniikan laitoksen raskaaseen laboratorioon rakennetulla kaasutusreaktorilla. Kaasutuskokeiden avulla löydettiin kaasutusreaktorin toiminnan ongelmakohdat ja pystyttiin aloittamaan lämmitysjärjestelmän jatkokehitys.

Vanhusten hyvä kotona asuminen: tutkimusta kuntatuottavuudesta, älykodeista ja apuvälinepalveluprosesseista

The purpose of the research was to investigate operational processes related to home care of the elderly as well as use of assistive devices in smart home environments, and operational processes that are generally related to use of assistive devices – from the point of view of productivity improvement. The themes were looked into from the points of view of both the elderly and care personnel. In addition, perspectives of near relatives of the elderly, of the larger service system as well as of companies that provided assistive devices to the smart homes were taken into consideration. In the study of home care processes, 32 customer interviews and 17 employee interviews were carried out. This report contains a summary that is based on a separate report of the home care study. The study of home care was conducted in 2006. The use of technological and mechanical assistive devices and the related operational processes were investigated with the help of the smart home pilot in 2007–2008. The study is described in this report. The smart home pilot was implemented in four different housing service units for elderly people at Lahti, Nastola and Hollola. They were in use during short-term housing periods related to, for instance, end of hospitalisation, holidays of caring relatives and assessment of living and housing conditions. More than 60 different assistive devices and technologies were brought to the smart homes. During the pilot period, experiences of customers and personnel as well as processes related to the use of assistive devices were investigated. The research material consisted of 20 survey questionnaires of personnel and customers, four interviews with customers, five interviews with personnel, feedback survey responses from 14 companies, and other data that were collected, for instance, in orientation events. The research results highlighted the need for tailored services based on an elderly person’s needs and wishes, while taking advantage of innovative and technological solutions. As in the earlier home care study, also assistive device-related operational processes were looked into with the help of concepts of ‘resource focus’, ‘lost motion’ and ‘intermediate landing’. The following were identified as central operational processes in assistive device-related services (regardless of the service provider): (1) acquisition process of technologies and assistive devices as well as of rearrangement and rebuilding works in the home, (2) introduction and orientation process (of the elderly, their relatives and care personnel), (3) information and communication process, and (4) service and monitoring process. In addition, the research focused on design and desirability of assistive devices as well as their costs, such as opportunity costs. The process-based points of view gave new knowledge that may be used in the future to develop service processes and clarify their ownership so that separately managed cross-functional processes could be built with participants from different sectors to operate alongside organisations of elderly care. Development of functionality of assistive device-related services is a societally significant issue.

Globaalin taloushallinnon palvelukeskuksen perustaminen, mahdollisuudet ja haasteet

Tutkimuksen tavoitteena on tutkia globaalin taloushallinnon palvelukeskuksen perustamisprosessia ja palvelukeskusmalliin liittyviä hyötyjä. Tarkoituksena on määrittää palvelukeskuksen perustamiseen liittyvät vaiheet sekä ne kriittiset tekijät, jotka on huomioitava ennen perustamisprosessia sekä sen aikana. Empiirinen osuus on suoritettu kvalitatiivisena tutkimuksena suorittamalla neljä puolistrukturoitua teemahaastattelua globaalin taloushallinnon palvelukeskuksen perustaneissa organisaatioissa. Tutkimustulokset osoittavat, että merkittävimmät palvelukeskusmalliin liitetyt edut ovat tuottavuuden, tehokkuuden ja laadun paraneminen sekä kustannussäästöt. Kriittisimpiä menestystekijöitä ovat muutoksen suunnitteluun ja hallintaan liittyvät tekijät. Malliin liitetyt haasteet liittyvät pääasiassa globaalin toimintaympäristön monimuotoisuuteen, henkilöstöön, teknologiaan ja prosesseihin. Saadut tulokset ovat erittäin yhteneväisiä aikaisempien tutkimusten kanssa. Empiirisen tutkimuksen tulosten sekä aikaisemman tutkimustiedon perusteella on luotu viisivaiheinen malli globaalin taloushallinnon palvelukeskuksen perustamisprosessista.

Vastaanottoprosessin nopeuttaminen ja virheiden eliminointi RFID-tekniikan avulla

Työn tavoitteena oli tutkia ja kehittää saapuvan tavaran vastaanottoprosessia poistaen siitä Lean-oppien mukaisesti hukkaa. Kehitys tehtiin lisäämällä vastaanoton tiedonsiirtoautomatiikkaa, ja toteutus tehtiin RFID-tekniikan avulla. Tutkielman teoreettisena taustana ovat Lean-opit, joiden avulla tavoitteena oli eliminoida hukka, suunnitella vastaanottoprosessi uudelleen ja kehittää sitä edelleen. Keskeisenä tehtävänä oli löytää ne tekniikan valintaan vaikuttavat tekijät, joilla case-yrityksessä saatiin käyttövarma RDIF-tekniikka käyttöön. Tutkielmassa kerrotaan myös, miten tekniikan käyttöönotto toteutettiin. Lopuksi esitetään tuloksia ja päätelmiä uudistetusta prosessista ja kerrotaan niistä jatkotoimenpiteistä, joiden avulla teknologian käyttöä voidaan edelleen laajentaa. The aim of this study was analyze and develop the inbound receiving process of removing waste according of Lean-thinking. Development was done by raising inbound transmission automation implementation done by RFID- technology. The theoretical background was Lean –thinking; how to re-design process further development to eliminate waste. The main task was to find a reliable RFID- technology and the choice of technology factors were taken into account in the case company and how the technology was implemented. Finally, the presented results and conclusions of re-design process and possibilities to expand the technology to the case company processes.

Automated Purchase to Pay Process Value Modeling and Comparative Process Speeds

The importance of efficient supply chain management has increased due to globalization and the blurring of organizational boundaries. Various supply chain management technologies have been identified to drive organizational profitability and financial performance. Organizations have historically been concentrating heavily on the flow of goods and services, while less attention has been dedicated to the flow of money. While supply chains are becoming more transparent and automated, new opportunities for financial supply chain management have emerged through information technology solutions and comprehensive financial supply chain management strategies. This research concentrates on the end part of the purchasing process which is the handling of invoices. Efficient invoice processing can have an impact on organizations working capital management and thus provide companies with better readiness to face the challenges related to cash management. Leveraging a process mining solution the aim of this research was to examine the automated invoice handling process of four different organizations. The invoice data was collected from each organizations invoice processing system. The sample included all the invoices organizations had processed during the year 2012. The main objective was to find out whether e-invoices are faster to process in an automated invoice processing solution than scanned invoices (post entry into invoice processing solution). Other objectives included looking into the longest lead times between process steps and the impact of manual process steps on cycle time. Processing of invoices from maverick purchases was also examined. Based on the results of the research and previous literature on the subject, suggestions for improving the process were proposed. The results of the research indicate that scanned invoices were processed faster than e-invoices. This is mostly due to the more complex processing of e-invoices. It should be noted however that the manual tasks related to turning a paper invoice into electronic format through scanning are ignored in this research. The transitions with the longest lead times in the invoice handling process included both pre-automated steps as well as manual steps performed by humans. When the most common manual steps were examined in more detail, it was clear that these steps had a prolonging impact on the process. Regarding invoices from maverick purchases the evidence shows that these invoices were slower to process than invoices from purchases conducted through e-procurement systems and from preferred suppliers. Suggestions on how to improve the process included: increasing invoice matching, reducing of manual steps and leveraging of different value added services such as invoice validation service, mobile solutions and supply chain financing services. For companies that have already reaped all the process efficiencies the next step is to engage in collaborative financial supply chain management strategies that can benefit the whole supply chain.

Wet Oxidation of Concentrated Wastewaters: Process Combination and Reaction Kinetic Modeling

The accumulation of aqueous pollutants is becoming a global problem. The search for suitable methods and/or combinations of water treatment processes is a task that can slow down and stop the process of water pollution. In this work, the method of wet oxidation was considered as an appropriate technique for the elimination of the impurities present in paper mill process waters. It has been shown that, when combined with traditional wastewater treatment processes, wet oxidation offers many advantages. The combination of coagulation and wet oxidation offers a new opportunity for the improvement of the quality of wastewater designated for discharge or recycling. First of all, the utilization of coagulated sludge via wet oxidation provides a conditioning process for the sludge, i.e. dewatering, which is rather difficult to carry out with untreated waste. Secondly, Fe2(SO4)3, which is employed earlier as a coagulant, transforms the conventional wet oxidation process into a catalytic one. The use of coagulation as the post-treatment for wet oxidation can offer the possibility of the brown hue that usually accompanies the partial oxidation to be reduced. As a result, the supernatant is less colored and also contains a rather low amount of Fe ions to beconsidered for recycling inside mills. The thickened part that consists of metal ions is then recycled back to the wet oxidation system. It was also observed that wet oxidation is favorable for the degradation of pitch substances (LWEs) and lignin that are present in the process waters of paper mills. Rather low operating temperatures are needed for wet oxidation in order to destruct LWEs. The oxidation in the alkaline media provides not only the faster elimination of pitch and lignin but also significantly improves the biodegradable characteristics of wastewater that contains lignin and pitch substances. During the course of the kinetic studies, a model, which can predict the enhancements of the biodegradability of wastewater, was elaborated. The model includes lumped concentrations suchas the chemical oxygen demand and biochemical oxygen demand and reflects a generalized reaction network of oxidative transformations. Later developments incorporated a new lump, the immediately available biochemical oxygen demand, which increased the fidelity of the predictions made by the model. Since changes in biodegradability occur simultaneously with the destruction of LWEs, an attempt was made to combine these two facts for modeling purposes.

Modeling and developing a customer-oriented configuration process in a mass customization environment

In this thesis the main objective is to examine and model configuration system and related processes. When and where configuration information is created in product development process and how it is utilized in order-delivery process? These two processes are the essential part of the whole configuration system from the information point of view. Empirical part of the work was done as a constructive research inside a company that follows a mass customization approach. Data models and documentation are created for different development stages of the configuration system. A base data model already existed for new structures and relations between these structures. This model was used as the basis for the later data modeling work. Data models include different data structures, their key objects and attributes, and relations between. Representation of configuration rules for the to-be configuration system was defined as one of the key focus point. Further, it is examined how the customer needs and requirements information can be integrated into the product development process. Requirements hierarchy and classification system is presented. It is shown how individual requirement specifications can be connected for physical design structure via features by developing the existing base data model further.

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

Application of Computational Fluid Dynamics in Modeling Blood Flow in Human Thoracic Aorta

The aim of this study was to simulate blood flow in thoracic human aorta and understand the role of flow dynamics in the initialization and localization of atherosclerotic plaque in human thoracic aorta. The blood flow dynamics in idealized and realistic models of human thoracic aorta were numerically simulated in three idealized and two realistic thoracic aorta models. The idealized models of thoracic aorta were reconstructed with measurements available from literature, and the realistic models of thoracic aorta were constructed by image processing Computed Tomographic (CT) images. The CT images were made available by South Karelia Central Hospital in Lappeenranta. The reconstruction of thoracic aorta consisted of operations, such as contrast adjustment, image segmentations, and 3D surface rendering. Additional design operations were performed to make the aorta model compatible for the numerical method based computer code. The image processing and design operations were performed with specialized medical image processing software. Pulsatile pressure and velocity boundary conditions were deployed as inlet boundary conditions. The blood flow was assumed homogeneous and incompressible. The blood was assumed to be a Newtonian fluid. The simulations with idealized models of thoracic aorta were carried out with Finite Element Method based computer code, while the simulations with realistic models of thoracic aorta were carried out with Finite Volume Method based computer code. Simulations were carried out for four cardiac cycles. The distribution of flow, pressure and Wall Shear Stress (WSS) observed during the fourth cardiac cycle were extensively analyzed. The aim of carrying out the simulations with idealized model was to get an estimate of flow dynamics in a realistic aorta model. The motive behind the choice of three aorta models with distinct features was to understand the dependence of flow dynamics on aorta anatomy. Highly disturbed and nonuniform distribution of velocity and WSS was observed in aortic arch, near brachiocephalic, left common artery, and left subclavian artery. On the other hand, the WSS profiles at the roots of branches show significant differences with geometry variation of aorta and branches. The comparison of instantaneous WSS profiles revealed that the model with straight branching arteries had relatively lower WSS compared to that in the aorta model with curved branches. In addition to this, significant differences were observed in the spatial and temporal profiles of WSS, flow, and pressure. The study with idealized model was extended to study blood flow in thoracic aorta under the effects of hypertension and hypotension. One of the idealized aorta models was modified along with the boundary conditions to mimic the thoracic aorta under the effects of hypertension and hypotension. The results of simulations with realistic models extracted from CT scans demonstrated more realistic flow dynamics than that in the idealized models. During systole, the velocity in ascending aorta was skewed towards the outer wall of aortic arch. The flow develops secondary flow patterns as it moves downstream towards aortic arch. Unlike idealized models, the distribution of flow was nonplanar and heavily guided by the artery anatomy. Flow cavitation was observed in the aorta model which was imaged giving longer branches. This could not be properly observed in the model with imaging containing a shorter length for aortic branches. The flow circulation was also observed in the inner wall of the aortic arch. However, during the diastole, the flow profiles were almost flat and regular due the acceleration of flow at the inlet. The flow profiles were weakly turbulent during the flow reversal. The complex flow patterns caused a non-uniform distribution of WSS. High WSS was distributed at the junction of branches and aortic arch. Low WSS was distributed at the proximal part of the junction, while intermedium WSS was distributed in the distal part of the junction. The pulsatile nature of the inflow caused oscillating WSS at the branch entry region and inner curvature of aortic arch. Based on the WSS distribution in the realistic model, one of the aorta models was altered to induce artificial atherosclerotic plaque at the branch entry region and inner curvature of aortic arch. Atherosclerotic plaque causing 50% blockage of lumen was introduced in brachiocephalic artery, common carotid artery, left subclavian artery, and aortic arch. The aim of this part of the study was first to study the effect of stenosis on flow and WSS distribution, understand the effect of shape of atherosclerotic plaque on flow and WSS distribution, and finally to investigate the effect of lumen blockage severity on flow and WSS distributions. The results revealed that the distribution of WSS is significantly affected by plaque with mere 50% stenosis. The asymmetric shape of stenosis causes higher WSS in branching arteries than in the cases with symmetric plaque. The flow dynamics within thoracic aorta models has been extensively studied and reported here. The effects of pressure and arterial anatomy on the flow dynamic were investigated. The distribution of complex flow and WSS is correlated with the localization of atherosclerosis. With the available results we can conclude that the thoracic aorta, with complex anatomy is the most vulnerable artery for the localization and development of atherosclerosis. The flow dynamics and arterial anatomy play a role in the localization of atherosclerosis. The patient specific image based models can be used to diagnose the locations in the aorta vulnerable to the development of arterial diseases such as atherosclerosis.

Modeling study of limestone reactions in fluidized bed conditions

Traditionally limestone has been used for the flue gas desulfurization in fluidized bed combustion. Recently, several studies have been carried out to examine the use of limestone in applications which enable the removal of carbon dioxide from the combustion gases, such as calcium looping technology and oxy-fuel combustion. In these processes interlinked limestone reactions occur but the reaction mechanisms and kinetics are not yet fully understood. To examine these phenomena, analytical and numerical models have been created. In this work, the limestone reactions were studied with aid of one-dimensional numerical particle model. The model describes a single limestone particle in the process as a function of time, the progress of the reactions and the mass and energy transfer in the particle. The model-based results were compared with experimental laboratory scale BFB results. It was observed that by increasing the temperature from 850 °C to 950 °C the calcination was enhanced but the sulfate conversion was no more improved. A higher sulfur dioxide concentration accelerated the sulfation reaction and based on the modeling, the sulfation is first order with respect to SO2. The reaction order of O2 seems to become zero at high oxygen concentrations.